Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “affinity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

A reexamination of the RB-SR isotopic systematics of lunar breccia 12013

Lunar breccia 12013 is one of the few rocks for which isotopic evidence has been interpreted as indicating a 4.5-AE age, and it is the only lunar rock which contains abundant granitic material that may date back to the initial lunar differentiation. An investigation of 12013 conducted by Quick et al. (1981) has led to the conclusion that 12013 is an extremely complex mixture of impact-generated melt and clastic components of uncertain affinities. It was found that the granitic component in 12013 need not be any older than 4.16-4.17 AE. In the present study a model is presented for the Rb-Sr evolution of 12013 which explains the isotopic data without resorting to a 4.5-AE age for any component. Attention is given to petrographic constraints, isotopic investigations, and an evaluation of the Rb-Sr isotopic data. It is concluded that lunar rock 12013 is an extremely complex polymict breccia in which the Rb-Sr isotopic systematics have been greatly influenced by mixing during breccia formation and by subsequent reequilibration.

Quick, J. E.↗

Regional chemical setting of the Apollo 16 landing site and the importance of the Kant Plateau

Orbital X-ray data from the Apollo 16 region indicate that physiographic units identified before the lunar mission can be classified as chemical units as well. The Descartes Mountains, however, appear to be an extension of the Kant Plateau composition that is unusually anorthositic and resembles farside terra. The Cayley Plains have closer affinities to basaltic materials than terra materials, physically, spectrally and chemically. The Theophilus impact, 330 km east of the landing site, excavated magnesium-rich basalts from below less-magnesian flows in Mare Nectaris; but, mafic ejecta was substantially blocked from the Apollo 16 site by the Kant Plateau that rises 5 km above the level of the mare. Apollo 16 soil samples from stations selected to collect either Descartes Mountains material or Cayley Plains material were surprisingly similar. However, they do, indeed, show the chemical trends indicative of the two units as defined by the orbiting geochemistry detectors. The Kant Plateau and Descartes Mountains material may be among the rare nearside examples of a plagioclase-rich cumulate of the primordial magma ocean.

Andre, C. G.↗

Theory of metal atom-water interactions and alkali halide dimers

Theoretical studies of the interactions of metal atoms with water and some of its isoelectronic analogs, and of the properties of alkali halides and their aggregates are discussed. Results are presented of ab initio calculations of the heats of reaction of the metal-water adducts and hydroxyhydrides of Li, Be, B, Na, Mg, and Al, and of the bond lengths and angles an; the heats of reaction for the insertion of Al into HF, H2O, NH3, H2S and CH3OH, and Be and Mg into H2O. Calculations of the electron affinities and dipole moments and polarizabilities of selected gas phase alkali halide monomers and dimers are discussed, with particular attention given to results of calculations of the polarizability of LiF taking into account electron correlation effects, and the polarizability of the dimer (LiF)2.

Jordan, K. D.↗

Use of high L.E.T. radiation to improve adhesion of metals to polytetrafluoroethylene

MgK alpha X-rays (1254 eV) and 2 keV electrons irradiate the surface of polytetrafluoro ethylene (PTFE). The damage is confined to a few tenths of a micron below the surface, and the doses exceed 10 to the eight power rad. X-ray Photoelectron Spectroscopy (XPS) of the irradiated surfaces and mass spectroscopy of the gaseous products of irradiation indicate that the damaged layer is crosslinked or branched PTFE. After either type of irradiation, the surface has enhanced affinity for metals and a lower contact angle with hexadecane. Tape pull tests show that evaporated Ni and Au films adhere better to the irradiated surface. XPS shows the Ni interacts chemically with PTFE forming NiF2 and possibly NiC. However, the gold adhesion and contact angle results indicate that the interaction is, at least in part, chemically nonspecific. Decreased contact angles on FEP Teflon crystallized against gold were attributed to either the presence of a polar oxygen layer or increased physical forces due to greater density. In the case of irradiated PTFE, no oxygen on the surface was observed. The crosslinked structure might, however, have a greater density, thus accounting for the observed increase in adhesion and wettability.

Wheeler, D. R.↗

Ion exchange selectivity for cross-linked polyacrylic acid

The ion separation factors for 21 common metal ions with cross-linked polyacrylic acid were determined as a function of pH and the percent of the cross-linked polyacrylic acid neutralized. The calcium ion was used as a reference. At a pH of 5 the decreasing order of affinity of the ions for the cross-linked polyacrylic acid was found to be: Hg++, Fe+++, Pb++, Cr+++, Cu++, Cd++, Al+++, Ag+, Zn++, Ni++, Mn++, Co++, Ca++, Sr++, Ba++, Mg++, K+, Rb+, Cs+, Na+, and Li+. Members of a chemical family exhibited similar selectivities. The Hg++ ion appeared to be about a million times more strongly bound than the alkali metal ions. The relative binding of most of the metal ions varied with pH; the very tightly and very weakly bound ions showed the largest variations with pH. The calcium ion-hydrogen ion equilibrium was perturbed very little by the presence of the other ions. The separation factors and selectivity coefficients are discussed in terms of equilibrium and thermodynamic significance.

May, C. E.↗

Characteristics of statoliths from rootcaps and coleoptiles

Amyloplasts with intact envelopes were isolated from corn coleoptiles, incubated with either cationized ferritin (CF) or fluorescein isothiocyanate (FITC)-CF, and examined with epifluorescence optics. Before incubation, the mean zeta potential was found to be -19.4 mv. The net negative surface charge was confirmed ultrastructurally by the binding of CF to both amyloplasts and starch grains. Binding to the latter was reduced compared to the former. FITC-CF showed binding to some but not all amyloplasts, and was absent from individual starch granules. Membrane-bound calcium, indicated by chlorotetracycline, fluorescence, was detected throughout the cytoplasm of root cap cells. These results may reflect an affinity of CF for membrane-based charge, and suggest that a calcium shell exists on the amyloplast envelope.

Sack, F. D.↗

Quantitation of chlorpromazine-bound calmodulin during chlorpromazine inhibition of gravitropism

The regulatory protein, calmodulin (CaM), controls the activity of a plasma membrane localized ATPase in plants which serves to pump calcium out of cells. Recent data are consistent with the hypothesis that activation of this pump is one of the early steps necessary for gravitropism. Chlorpromazine (CPZ), a CaM antagonist, reversibly inhibits gravitropism in oat coleoptiles at concentrations which permit normal growth rates. C-14-labeled CPZ was used to photo-affinity label endogenous CaM in vivo to learn whether the drug is actually binding to some portion of endogenous CaM when it inhibits gravitropism. Under conditions in which CPZ inhibits gravitropism for over an hour, at least 11% of the CaM in gravitropically stimulated coleoptiles is bound to CPZ. In a given CPZ experiment the degree of inhibition of gravitropism correlates well with the amount of CaM bound to CPZ.

Roux, S. J.↗

Effect of denervation and reinnervation on oxidation of 6-(C-14) glucose by rat skeletal muscle homogenates

The effects of denervation and reinnervation of the rat extensor digitorum longus muscle on the oxidation of 6-(C-14) glucose to (C-14)O2 is investigated. Results show that the rate of (C-14)O2 production decreased dramatically following denervation and the decrease became significant 20 days after nerve section. The changes which occurred prior to day 20 apparently reflected the decline of muscle mass. The decreased (C-14)O2 production was found to be due to reduced capacity of the enzymatic system, while there was no change in the apparent affinity for glucose. Results of mixing experiments showed that the loss of oxidative capacity following denervation is not caused by the production of soluble inhibitors by degenerating muscle. Measurements of the (C-14)O2 revealed that oxidative metabolism recovered during reinnervation. The specific activity in reinnervated muscles displayed an 'overshoot' of approximately 50 percent, which returned to control levels by day 60. The time-course of the denervation-mediated change indicates that altered oxidative capacity is secondary to events that initiate dennervation changes in muscle, although diminished oxidative capacity may be of considerable metabolic significance in denervated muscle.

Dubois, D. C.↗

Generic buckling curves for specially orthotropic rectangular plates

Using a double affine transformation, the classical buckling equation for specially orthotropic plates and the corresponding virtual work theorem are presented in a particularly simple fashion. These dual representations are characterized by a single material constant, called the generalized rigidity ratio, whose range is predicted to be the closed interval from 0 to 1 (if this prediction is correct then the numerical results using a ratio greater than 1 in the specially orthotropic plate literature are incorrect); when natural boundary conditions are considered a generalized Poisson's ratio is introduced. Thus the buckling results are valid for any specially orthotropic material; hence the curves presented in the text are generic rather than specific. The solution trends are twofold; the buckling coefficients decrease with decreasing generalized rigidity ratio and, when applicable, they decrease with increasing generalized Poisson's ratio. Since the isotropic plate is one limiting case of the above analysis, it is also true that isotropic buckling coefficients decrease with increasing Poission's ratio.

Brunnelle, E. J.↗

Calcium Modulation of Plant Plasma Membrane-Bound Atpase Activities

The kinetic properties of barley enzyme are discussed and compared with those of other plants. Possibilities for calcium transport in the plasma membrane by proton pump and ATPase-dependent calcium pumps are explored. Topics covered include the ph phase of the enzyme; high affinity of barley for calcium; temperature dependence, activation enthalpy, and the types of ATPase catalytic sites. Attention is given to lipids which are both screened and bound by calcium. Studies show that barley has a calmodulin activated ATPase that is found in the presence of magnesium and calcium.

Caldwell, C.↗

Transparent conductive coatings

Thin film transparent conductors are discussed. Materials with electrical conductivity and optical transparency are highly desirable in many optoelectronic applications including photovoltaics. Certain binary oxide semiconductors such as tin oxide (SnO2) and indium oxide (In2O3) offer much better performance tradeoff in optoelectronics as well as better mechanical and chemical stability than thin semitransparent films. These thin-film transparent conductors (TC) are essentially wide-bandgap degenerate semiconductors - invariably n-type - and hence are transparent to sub-bandgap (visible) radiation while affording high electrical conductivity due to the large free electron concentration. The principal performance characteristics of TC's are, of course, electrical conductivity and optical transmission. The TC's have a refractive index of around 2.0 and hence act as very efficient antireflection coatings. For using TC's in surface barrier solar cells, the photovoltaic barrier is of utmost importance and so the work function or electron affinity of the TC is also a very important material parameter. Fabrication processes are discussed.

Ashok, S.↗

Determination of the succinonitrile-benzene and succinonitrile-cyclohexanol phase diagrams by thermal and UV spectroscopic analysis

Equilibrium temperature-composition diagrams were determined for the two organic systems, succinonitrile-benzene and succinonitrile-cyclohexanol. Measurements were made using the common thermal analysis methods and UV spectrophotometry. Succinonitrile-benzene monotectic was chosen for its low affinity for water and because UV analysis would be simplified. Succinonitrile-cyclohexanol was chosen because both components are transparent models for metallic solidification, as opposed to the other known succinonitrile-based monotectics.

Kaukler, W. F.↗

Ancient crustal components in the Fra Mauro breccias

Texturally pristine clasts preserve primary petrographic relationships and mineral compositions, yielding insights into igneous processes of the early lunar crust that cannot be gained from highly shocked and brecciated 'chemically pristine' samples. The use of texture as a prime criterion allows for expansion of the data base derived solely from chemical criteria, and provides complementary data. Texturally pristine clasts from the Apollo 14 site studied here include anorthosite, troctolites, gabbronorites, and basalts. Alkali anorthosites are plagioclase orthocumulates and may form by flotation in Mg-suite plutons. Ferroan anorthosite was cataclastically deformed and metamorphosed to granulite facies. Troctolites include both 01 + Plg and 01 + En + Plg cumulates. Major and trace element analyses of two troctolites reveal 'eastern' geochemical affinities that contrast other 'western' troctolites. Gabbronorites are Pig + Plg + or - Sp cumulates whose parent magmas may range from high-Al to intermediate-Ti mare basalt. At least three varieties of mare basalt are found at Apollo 14: high-Al, low-Ti; low-Al, intermediate-Ti; and low-Al, Ti VHK basalt. VHK (Very High Potassium) basalt is a new variety indigenous to Apollo 14.

Shervais, J. W.↗

Complexes of polyadenylic acid and the methyl esters of amino acids

A study of amino acid methyl esters binding to polyadenylic acid supports the theory that the genetic code originated through weak but selective affinities between amino acids and nucleotides. NMR, insoluble complex analysis, and ultraviolet spectroscopy are used to illustrate a correlation between the hydrophybicities of A amino acids and their binding constants, which, beginning with the largest, are in the order of Phe (having nominally a hydrophobic AAA anticodon), Ile, Leu, Val and Gly (having a hydrophilic anticodon with no A). In general, the binding constants are twice the values by Reuben and Polk (1980) for monomeric AMP, which suggests that polymer amino acids are interacting with only one base. No real differences are found betwen poly A binding for free Phe, Phe methyl ester or Phe amide, except that the amide value is slightly lower.

Khaled, M. A.↗

Modeling of unsteady small disturbance transonic flow using parametric differentiation, pseudospectral analysis and finite-differencing

A procedure for solving the nonlinear unsteady small disturbance transonic equation is formulated. This procedure is a synthesis of a pseudospectral method, parametric differentiation, and finite differencing. It is equally applicable to lifting and nonlifting airfoils. The procedure is particularly well suited to aeroelastic stability studies that may require a set of affine solutions.

Brown, M.↗

Eigenvalue similarity rules for symmetric cross-ply laminated plates

Symmetric cross-ply laminated plates are analyzed by employing a previously presented affine stretching process, some material constant definitions from Tsai (1964), and by gneralizing existing similarity rules. As examples, similarity rules are employed to find the frequency spectrum of a cross-ply symmetric plate from the corresponding isotropic solution, and a similarity solution is presented for the vibration of an axially loaded, simply supported cross-ply symmetric plate. Buckling similarity rules are also presented.

Brunelle, E. J.↗

Moisture dependence of positron annihilation spectra in nylon-6

Positron annihilation time spectra have been measured in nylon-6 samples as a function of their moisture content. The measured average long life component lifetime values are: 1722 + or - 47 ps (dry), 1676 + or - 40 ps (14.6 percent saturation value), 1719 + or - 26 ps (29.3 percent saturation value), 1720 + or - 35 ps (50 percent of saturation value), 1857 + or - 35 ps (78.1 percent saturation value), and 1936 + or - 57 ps (saturated). It appears that nylon-6 has a special affinity for water at low concentration levels where H2O molecules enter between the (C = O - H-N) chemical bonds between nylon molecular chains. As the water concentration increases beyond a critical level, nylon-6 specimens start trapping H2O molecules in other bond sites or potential wells. The trapped water increases the free volume in the test specimens and reduces Ps atom formation as well as its subsequent decay rate.

Singh, J. J.↗

Optogalvanic photodetachment spectroscopy

A new extension to optogalvanic spectroscopy, in which electrons detached from negative ions formed in the discharge are observed as a function of incident laser wavelength, has been developed. The determination of the electron affinities of I(-) and Cl(-) atomic ions is described. The potential of the technique for studying the spectroscopy of molecular negative ions is also discussed.

Mcdermid, I. S.↗