Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “YIn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Discrete anisotropic radiative transfer modelling of solar-induced chlorophyll fluorescence: Structural impacts in geometrically explicit vegetation canopies

Solar-induced fluorescence (SIF) is a subtle but informative optical signal of vegetation photosynthesis. Remotely sensed SIF integrates environmental, physiological and structural changes that alter photosynthesis at leaf, plant and canopy scales. Radiative transfer models are ideally suited to investigate the complex sources of variability in the SIF signal to guide the interpretation of SIF retrievals from airborne and space-borne platforms. Here, we coupled the Fluspect-Cx model of leaf optical properties and chlorophyll-a fluorescence with the Discrete Anisotropic Radiative Transfer (DART) model to upscale SIF from individual leaves to three-dimensional (3D) structurally explicit canopies. For one-dimensional homogeneous (turbid-like) canopies, DART-SIF was nearly identical to SIF simulated in two existing models, SCOPE and mSCOPE (RMSE <0.221 W./sq.m.μm.sr). DART simulations in geometrically explicit 3D canopies offered four important insights regarding the influence of vegetation structure on the multi-angular top-of-canopy SIF signal. First, changes in the 3D canopy architecture of maize crops, represented by leaf density (leaf area index), and plant clumping (canopy closure) had a larger impact on SIF than the modelled photosynthetic efficiency distinction between sun-adapted and shade-adapted foliage. Second, clumping of leaves at the crop and stand levels was identified as one of the key driving factors of multi-angular anisotropy of red and far-red SIF (686 and 740 nm) for both maize and eucalyptus canopies. Third, non-photosynthetic woody material had a significant impact on top-of-canopy SIF in modelled 3D forest stands. Wood shadowing decreased the photosynthetically active radiation absorbed by green leaves, and consequently the SIF emissions, by 10% in sparse and 17% in dense eucalyptus stands. The wood obstruction (blocking) effect, quantified as a relative difference of SIF escape probabilities from canopies with and without wood in the nadir viewing direction, decreased far-red SIF by 4–6% but it had a smaller and sometimes positive influence (by less than 2%) on red SIF. Fourth, DART 3D radiative budget profiles revealed that the majority of the SIF signal from a dense eucalyptus stand originated from the top 25% of the simulated canopy. Interestingly, the introduction of bark-covered woody elements did not alter the simulated balance and omnidirectional escape factor of red SIF in this upper canopy part but did raise significantly both of them in case of far-red SIF. These results demonstrate the importance of 3D radiative transfer and radiative budget simulations for investigating SIF interactions in structurally complex plant canopies and for a better understanding of spatiotemporal and multi-angular remote sensing SIF observations.

Zbyněk Malenovský↗
NASA NTRS2021

Reply to Comment by Velasco on “High-Resolution, Multilayer Modeling of Singapore’s Urban Climate Incorporating Local Climate Zones”

In response to the comment on our paper “High-resolution, multilayer modeling of Singapore's urban climate incorporating local climate zones,” we provide detailed response to each of the incorrect accusations with scientifically based evidence. We have evaluated our model using all the available observational data, and the results showed good agreement. Our modeling study includes assumptions, as all modeling work does, and we have discussed their rationales and possible implications.

M. O. Mughal↗
NASA NTRS2022

Global benefits of non-continuous flooding to reduce greenhouse gases and irrigation water use without rice yield penalty

Non-continuous flooding is an effective practice for reducing greenhouse gas emissions (GHGs) and irrigation water use (IRR) in rice fields. However, advancing global implementation is hampered by the lack of comprehensive understanding of GHGs and IRR reduction benefits without compromising rice yield. Here, we present the largest observational data set for such effects as of yet. By using Random Forest regression models based on 636 field trials at 105 globally georeferenced sites, we identified the key drivers of effects of non-continuous flooding practices and mapped maximum GHGs or IRR reduction benefits under optimal non-continuous flooding strategies. The results show that variation in effects of non-continuous flooding practices are primarily explained by the UnFlooded days Ratio (UFR, that is the ratio of the number of days without standing water in the field to total days of the growing period). Non-continuous flooding practices could be feasible to be adopted in 76% of global rice harvested areas. This would reduce the global warming potential (GWP) of CH4 and N2O combined from rice production by 47% or the total GWP by 7% and alleviate irrigation water use by 25%, while maintaining yield levels. The identified UFR targets far exceed currently observed levels particularly in South and Southeast Asia, suggesting large opportunities for climate mitigation and water use conservation, associated with the rigorous implementation of non-continuous flooding practices in global rice cultivation.

climate change mitigation↗
NASA NTRS2021

Regional trends and drivers of the global methane budget

The ongoing development of the Global Carbon Project (GCP) global methane (CH4) budget shows a continuation of increasing CH4 emissions and CH4 accumulation in the atmosphere during 2000–2017. Here, we decompose the global budget into 19 regions (18 land and 1 oceanic) and five key source sectors to spatially attribute the observed global trends. A comparison of top-down (TD) (atmospheric and transport model-based) and bottom-up (BU) (inventory- and process model-based) CH4 emission estimates demonstrates robust temporal trends with CH4 emissions increasing in 16 of the 19 regions. Five regions—China, Southeast Asia, USA, South Asia, and Brazil—account for >40% of the global total emissions (their anthropogenic and natural sources together totaling >270 Tg CH4 yr−1 in 2008–2017). Two of these regions, China and South Asia, emit predominantly anthropogenic emissions (>75%) and together emit more than 25% of global anthropogenic emissions. China and the Middle East show the largest increases in total emission rates over the 2000 to 2017 period with regional emissions increasing by >20%. In contrast, Europe and Korea and Japan show a steady decline in CH4 emission rates, with total emissions decreasing by ~10% between 2000 and 2017. Coal mining, waste (predominantly solid waste disposal) and livestock (especially enteric fermentation) are dominant drivers of observed emissions increases while declines appear driven by a combination of waste and fossil emission reductions. As such, together these sectors present the greatest risks of further increasing the atmospheric CH4 burden and the greatest opportunities for greenhouse gas abatement.

Global Carbon Project (GCP)↗
NASA NTRS2021

Three-dimensional estimation of deciduous forest canopy structure and leaf area using multi-directional, leaf-on and leaf-off airborne lidar data

Airborne laser scanning (ALS) has been widely used to map gap probability and leaf area index (LAI) distribution at plot and landscape scales. As an indirect measurement, most ALS methods to estimate LAI combine waveform or point density information with supporting field measurements such as the leaf angle distribution, gap probability, or direct LAI measures. The development of a more independent estimation approach would facilitate more widespread use of existing ALS data to investigate patterns of forest structure and build realistic 3-D vegetation scenes to simulate remote sensing imagery and energy balance. Here, we develop a data processing workflow (named PVlad) using ALS point cloud apparent reflectance to estimate LAI and voxel-based leaf area density (LAD), aiming to reduce the need for associated field measurements such as the gap probability. The adaptation of the path volume (PV) concept derived from apparent reflectance integrates information from multi-directional ALS pulses, and quantifies the percentage exploration of each voxel for classification and occlusion correction, such that rigorous volumetric sampling approaches can be developed to derive LAI and LAD. The PVlad workflow was applied to discrete-return lidar data (Riegl VQ480i) acquired by NASA Goddard's LiDAR, Hyperspectral and Thermal Imager (G-LiHT) Airborne Imager during leaf-on (summer) and leaf-off (spring) conditions at the Smithsonian Environmental Research Center (SERC). The estimates of LAI and LAD captured structural differences between mature, logged, and intermediate-aged stands over eight deciduous forest plots. The derived LAI values were compared to field litter collection measurements, and the derived LAD vertical distribution was compared to the output of the VoxLAD model using terrestrial laser scan (TLS) field survey data. Using voxel sizes ranging from 0.5 m to 5 m, overall LAI estimation showed linear fitting coefficient bias and for 1 and 2 m voxel sizes, and vertical LAD distribution showed strong correlation with and for 0.5 and 1m voxel sizes. For every forest stand, upper-canopy LAD had a low variance for voxel sizes of ≤ . Application of PVlad to the G-LiHT and other similar ALS data archives enables the development of fine-resolution LAI map products, including voxelization of LAD for ecosystem science and radiative transfer simulations of remote sensing imagery or surface energy balance.

Tiangang Yin↗
NASA NTRS2021

Satellite Constraints on the Latitudinal Distribution and Temperature Sensitivity of Wetland Methane Emissions

Wetland methane (CH4) emissions comprise about one-third of the global CH4 source. The latitudinal distribution and climate sensitivity of wetland CH4 fluxes are the key determinants of the global CH4-climate feedback. However, large differences exist between bottom-up estimates, informed by ground-based flux measurements, and top-down estimates derived from spaceborne total column CH4. Despite the extensive coverage of satellite CH4 concentration observations, challenges remain with using top-down estimates to test bottom-up models, mainly because of the uncertainties in the satellite retrievals, the model representation errors, the variable prior emissions, and the confounding role of the posterior error covariance structures. Here, we use satellite-based top-down CH4 flux estimates (2010–2012) to test and refine 42 bottom-up estimates of wetland emissions that use a range of hypothesized wetland extents and process controls. Our comparison between bottom-up models and satellite-based fluxes innovatively accounts for cross-correlations and spatial uncertainties typically found in top-down inverse estimates, such that only the information from satellite observations and the atmospheric transport model is kept as a constraint. We present a satellite-constrained wetland CH4 ensemble product derived from assembling the highest-performance bottom-up models, which estimates global wetland CH4 emissions of 148 (117–189, 5th–95th percentile) Tg CH4 yr−1. We find that tropical wetland emissions contribute 72% (63%–85%) to the global wetland total. We also find that a lower-than-expected temperature sensitivity agrees better with atmospheric CH4 measurements. Overall, our approach demonstrates the potential for using satellites to quantitatively refine bottom-up wetland CH4 emission estimates, their latitudinal distributions, and their sensitivity to climate.

wetland ch4↗
NASA NTRS2019

The CM carbonaceous chondrite regolith Diepenveen

A carbonaceous chondrite was recovered immediately after the fall near the village of Diepenveen in the Netherlands on October 27, 1873, but came to light only in 2012. Analysis of sodium and poly-aromatic hydrocarbon content suggests little contamination from handling. Diepenveen is a regolith breccia with an overall petrology consistent with a CM classification. Unlike most other CM chondrites, the bulk oxygen isotopes are extremely (16)O rich, apparently dominated by the signature of anhydrous minerals, distributed on a steep slope pointing to the domain of intrinsic CM water. A small subset plots closer to the normal CM regime, on a parallel line 2 ‰ lower in δ(17)O. Different lithologies in Diepenveen experienced varying levels of aqueous alteration processing, being less aqueously altered at places rather than more heated. The presence of an agglutinate grain and the properties of methanol-soluble organic compounds point to active impact processing of some of the clasts. Diepenveen belongs to a CM clan with ~5 Ma CRE age, longer than most other CM chondrites, and has a relatively young K-Ar resetting age of ~1.5 Ga. As a CM chondrite, Diepenveen may be representative of samples soon to be returned from the surface of asteroid (162173) Ryugu by the Hayabusa2 spacecraft.

Marco Langbroek↗
NASA NTRS2022

Oxygen Isotopes of Anhydrous Primary Minerals Show Kinship Between Asteroid Ryugu and Comet 81P/Wild2

The extraterrestrial materials returned from asteroid (162173) Ryugu consist predominantly of low-temperature aqueously formed secondary minerals and are chemically and mineralogically similar to CI (Ivuna-type) carbonaceous chondrites. Here we show that high-temperature anhydrous primary minerals in Ryugu and CI chondrites exhibit a bimodal distribution of oxygen isotopic compositions: 16 O-rich (associated with refractory inclusions) and 16 O-poor (associated with chondrules). Both the 16 O-rich and 16 O-poor minerals probably formed in the inner solar protoplanetary disk and were subsequently transported outwards. The abundance ratios of the 16 O-rich to 16 O-poor minerals in Ryugu and CI chondrites are higher than in other carbonaceous chondrite groups, but are similar to that of comet 81P/Wild2, suggesting that Ryugu and CI chondrites accreted in the outer Solar System closer to the accretion region of comets.

Noriyuki Kawasaki↗
NASA NTRS2022

Integrated Topographic Corrections Improve Forest Mapping Using Landsat Imagery

In mountainous environments, topography strongly affects the reflectance due to illumination effects and cast shadows, which introduce errors in land cover classifications. However, topographic correction is not routinely implemented in standard data pre-processing chains (e.g., Landsat Analysis Ready Data), and there is a lack of consensus whether topographic correction is necessary, and if so, how to conduct it. Furthermore, methods that correct simultaneously for atmospheric and topographic effects are becoming available, but they have not been compared directly. Our objects were to investigate (1) the effectiveness of two topographic correction approaches that integrate atmospheric and topographic correction, (2) improvements in classification accuracy when analyzing topographically corrected single-date imagery (14 July 2016 and 2 October 2016), versus a full Landsat time series from 2014 to 2016, and 3) improvements in classification accuracy when including additional terrain information (i.e., topographic slope, elevation, and aspect). We developed a physical based model and compared it with an enhanced C-correction, both of which integrate atmospheric and topographic correction. We compared classification accuracies with and without topographic correction using combinations of single-date imagery, image composites and spectral-temporal metrics generated from the full Landsat time series, and additional terrain information in the Caucasus Mountains. We found that both the enhanced C-correction and the physical model performed very well and largely eliminated the correlation (Pearson’s correlation coefficient r ranges from 0.06 to 0.24) between surface reflectance and illumination condition, but the physical model performed best (r ranges from 0.05 to 0.11). Both image composites, and spectral-temporal metrics generated from corrected imagery, resulted in significantly (p ≤ 0.05) higher classification accuracies and better forest classifications, especially for the mixed forests. Adding terrain information reduced classification error significantly, but not as much as topographic correction. In summary, topographic correction remains necessary, even when analyzing a full Landsat time series and including a digital elevation model in the classification. We recommend that topographic correction should be applied when analyzing Landsat satellite imagery in mountainous region for forest cover classification.

Atmospheric correction↗
NASA NTRS2022

Wetland Emission and Atmospheric Sink Changes Explain Methane Growth in 2020

Atmospheric methane growth reached an exceptionally high rate of 15.1 ± 0.4 parts per billion per year in 2020 despite a probable decrease in anthropogenic methane emissions during COVID-19 lockdowns(1). Here we quantify changes in methane sources and in its atmospheric sink in 2020 compared with 2019. We find that, globally, total anthropogenic emissions decreased by 1.2 ± 0.1 teragrams of methane per year (Tg CH4 yr−1), fire emissions decreased by 6.5 ± 0.1 Tg CH4 yr−1 and wetland emissions increased by 6.0 ± 2.3 Tg CH4 yr−1. Tropospheric OH concentration decreased by 1.6 ± 0.2 per cent relative to 2019, mainly as a result of lower anthropogenic nitrogen oxide (NOx) emissions and associated lower free tropospheric ozone during pandemic lockdowns(2). From atmospheric inversions, we also infer that global net emissions increased by 6.9 ± 2.1 Tg CH4 yr−1 in 2020 relative to 2019, and global methane removal from reaction with OH decreased by 7.5 ± 0.8 Tg CH4 yr−1. Therefore, we attribute the methane growth rate anomaly in 2020 relative to 2019 to lower OH sink (53 ± 10 per cent) and higher natural emissions (47 ± 16 per cent), mostly from wetlands. In line with previous findings(3,4,) our results imply that wetland methane emissions are sensitive to a warmer and wetter climate and could act as a positive feedback mechanism in the future. Our study also suggests that nitrogen oxide emission trends need to be taken into account when implementing the global anthropogenic methane emissions reduction pledge(5).

Shushi Peng↗
NASA NTRS2021

On the Presence and Thermalization of Cold Ions in the Exhaust of Antiparallel Symmetric Reconnection

Using fully kinetic 2.5 dimensional particle-in-cell simulations of anti-parallel symmetric magnetic reconnection, we investigate how initially cold ions are captured by the reconnection process, and how they evolve and behave in the exhaust. We find that initially cold ions can remain cold deep inside the exhaust. Cold ions that enter the exhaust downstream of active separatrices, closer to the dipolarization front, appear as cold counter-streaming beams behind the front. In the off-equatorial region, these cold ions generate ion-acoustic waves that aid in the thermalization both of the incoming and outgoing populations. Closest to the front, due to the stronger magnetization, the ions can remain relatively cold during the neutral plane crossing. In the intermediate exhaust, the weaker magnetization leads to enhanced pitch angle scattering and reflection. Cold ions that enter the exhaust closer to the X line, at active separatrices, evolve into a thermalized exhaust. Here, the cold populations are heated through a combination of thermalization at the separatrices and pitch angle scattering in the curved magnetic field around the neutral plane. Depending on where the ions enter the exhaust, and how long time they have spent there, they are accelerated to different energies. The superposition of separately thermalized ion populations that have been accelerated to different energies form the hot exhaust population.

Cecilia Norgren↗
NASA NTRS2023

Assimilation of Blended Satellite Soil Moisture Data Products to Further Improve Noah-MP Model Skills

Microwave satellite remote sensing has enabled observations of soil moisture (SM) at the global scale, and multiple SM data products have been developed in the past decades. However, single-sensor-based measurements are insufficient for continuous spatiotemporal coverage. In the context of its climate program, the Climate Change Initiative, the European Space Agency (ESA) has developed robust, long term, global scale, multi instrument satellite derived time series of climate data record for key component of the climate system, including soil moisture (CCI), while the Soil Moisture Operational Product System (SMOPS) was specifically developed by National Oceanic and Atmospheric Administration (NOAA) to offer the real time blended SM datasets through merging all available individual products. Before combining, all individual SM data ingested into both SMOPS and CCI blended products are scaled to Global Land Data Assimilation System (GLDAS) 0-10 cm SM climatology. Benefiting from land surface model evolution and the availability of high-quality forcing data, GLDAS has become more comprehensive to track SM changes and dynamic trends. The development of GLDAS and the scaling procedure in CCI and SMOPS leave an open scientific and operational question: do the blended satellite SM data products have added value comparing to the GLDAS product? This study clearly reveals that both CCI and SMOPS can provide the reliable SM observations with independent information, although their climatology matches well with GLDAS. Relative to assimilation of GLDAS 0-10 cm SM data, Noah-MP model can be further improved by assimilating the blended satellite SM observations with respect to the quality-controlled in situ measurements. The strong consistency of results presented in this paper proves that the blended satellite SM data products are more useful than the GLDAS product in terms of improving Noah-MP model performance.

Jifu Yin↗
NASA NTRS2023

Pervasive aqueous alteration in the early Solar System revealed by potassium isotopic variations in Ryugu samples and carbonaceous chondrites

C-type asteroids are the presumed home to carbonaceous chondrites, some of which contain abundant life-forming volatiles and organics. For the first time, samples from a C-type asteroid (162173 Ryugu) were successfully returned to Earth by JAXA’s Hayabusa2 mission. These pristine samples, uncontaminated by the terrestrial environment, allow a direct comparison with carbonaceous chondrites. This study reports the stable K isotopic compositions (expressed as δ 41 K) of Ryugu samples and seven carbonaceous chondrites to constrain the origin of K isotopic variations in the early Solar System. Three aliquots of Ryugu particles collected at two touchdown sites have identical δ 41 K values, averaged at -0.194 ± 0.038‰ (2SD). The K isotopic composition of Ryugu falls within the range of δ 41 K values measured on representative CI chondrites, and together, they define an average δ 41 K value of -0.185 ± 0.078‰ (2SE), which provides the current best estimate of the K isotopic composition of the bulk Solar System. Samples of CI chondrites with δ 41 K values that deviate from this range likely reflect terrestrial contaminations or compositional heterogeneities at sampled sizes. In addition to CI chondrites, substantial K isotopic variability is observed in other carbonaceous chondrites and within individual chondritic groups, with δ 41 K values inversely correlated with K abundances in many cases. These observations indicate widespread fluid activity occurred in chondrite parent bodies, which significantly altered the original K abundances and isotopic compositions of chondrules and matrices established at their accretion.

Asteroid Ryugu↗
NASA NTRS2023

The Magnesium Isotope Composition of Samples Returned From Asteroid Ryugu

The nucleosynthetic isotope composition of planetary materials provides a record of the heterogeneous distribution of stardust within the early solar system. In 2020 December, the Japan Aerospace Exploration Agency Hayabusa2 spacecraft returned to Earth the first samples of a primitive asteroid, namely, the Cb-type asteroid Ryugu. This provides a unique opportunity to explore the kinship between primitive asteroids and carbonaceous chondrites. We report high-precision μ 26 Mg* and μ 25 Mg values of Ryugu samples together with those of CI, CM, CV, and ungrouped carbonaceous chondrites. The stable Mg isotope composition of Ryugu aliquots defines μ 25 Mg values ranging from –160 ± 20 ppm to –272 ± 30 ppm, which extends to lighter compositions relative to Ivuna-type (CI) and other carbonaceous chondrite groups. We interpret the μ 25 Mg variability as reflecting heterogeneous sampling of a carbonate phase hosting isotopically light Mg (μ 25 Mg ∼ –1400 ppm) formed by low temperature equilibrium processes. After correcting for this effect, Ryugu samples return homogeneous μ 26 Mg* values corresponding to a weighted mean of 7.1 ± 0.8 ppm. Thus, Ryugu defines a μ 26 Mg* excess relative to the CI and CR chondrite reservoirs corresponding to 3.8 ± 1.1 and 11.9 ± 0.8 ppm, respectively. These variations cannot be accounted for by in situ decay of 26 Al given their respective 27 Al/ 24 Mg ratios. Instead, it requires that Ryugu and the CI and CR parent bodies formed from material with a different initial 26 Al/ 27 Al ratio or that they are sourced from material with distinct Mg isotope compositions. Thus, our new Mg isotope data challenge the notion that Ryugu and CI chondrites share a common nucleosynthetic heritage.

Solar system evolution↗