SEARCH · Engineering Papers
Results for “Water Oxidation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Carbonate formation lowers the electrocatalytic activity of perovskite oxides for water electrolysis
Electrocatalytic activity depends on surface properties and therefore changes on air-exposure. We show that clean LaNiO 3 OER catalysts are more active than their air-exposed counterparts where surface carbonate groups block the nickel active sites.
(abstract) Kinetic Studies of the Heterogeneous Reaction of O+CO Forming CO&sub2; on Oxide and Water Ice Surfaces: Implications for the Atmospheric Stability of Mars
The heterogeneous reaction of CO and O on the surface of aerosols has been proposed as an important chemical process which may contribute to the CO&sub2; stability in the Martian atmosphere.
Influence of Surface and Structural Variations in Donor–Acceptor–Donor Sensitizers on Photoelectrocatalytic Water Splitting
Conjugated organic chromophores composed of linked donor (D) and acceptor (A) moieties have attracted considerable attention for photoelectrochemical applications. In this work, we compare the optoelectronic properties and photoelectrochemical performance of two D–A–D structural isomers with thiophene-X-carboxylic acid (X denotes 3 and 2 positions) derivatives and 2,1,3-benzothiadiazole as the D and A moieties, respectively. 5,5′-(Benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-3-carboxylic acid), BTD1, and 5,5′-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-2-carboxylic acid), BTD2, were employed in the study to understand how structural isomers affect surface attachments within chromophore–catalyst assemblies and their influence on charge-transfer dynamics. Crystal structures revealed that varying the position of the −COOH anchoring group causes the molecules to either contort out of a plane (BTD1) or adopt a near-perfect planar conformation (BTD2). BTD1 and BTD2 were co-loaded with either a water oxidation catalyst, [Ru(2,6-bis(1-methylbenzimidazol-2-yl)pyridine)-(4,4′-((HO) 2 OPCH 2 )2-2,2′-bipyridine)(OH 2 )] 2 , RuCt 2+ , or proton reduction catalyst [Ni(P 2 Ph N 2 C 6 H 4 CH 2 PO 3 H 2 ) 2 ] 2+ , NiCt 2+ , on oxide electrodes to facilitate photodriven water splitting reactions. Emission quenching measurements indicate that both BTD1 and BTD2 inject electrons into n-type SnO 2 |TiO 2 electrodes and holes into p-type NiO semiconductors from their respective excited states at high efficiencies >60%. Photocurrent densities of chromophore–catalyst assemblies obtained using linear sweep voltammetry (LSV) show that BTD2-sensitized photoanodes generate significantly more photocurrent than BTD1-sensitized electrodes; however, both exhibit similar performances at the photocathode. Photoelectrocatyltic measurements demonstrate that both BTD1 and BTD2 performed similarly, generating Faradaic efficiencies of 39 and 38% at the anode or 61 and 79% at the cathode. Transient absorption measurements suggest that the differences between the LSV and photoelectrocatalytic measurements result from the differences in quantum yields of the photogenerated redox equivalents, which is also a reflection of the varying metal oxide surface conformation. Our findings suggest that BTD2 should be investigated further in photocathodic studies since it has the structural advantage of being incorporated into diverse types of chromophore–catalyst assemblies.
Electron Trapping and Ion Leaching at the Li-Modified Quartz–Water Interface
Electrons and ions at metal oxide-water interfaces have a critical role in many phenomena and applications, thus making their properties of considerable interest. We here investigate the behavior of a lithium impurity at the water interface with Li-doped SiO 2 using hybrid density functional based ab initio molecular dynamics simulations. We find that the excess electron donated by the lithium dopant localizes on a surface silicon atom and is partially solvated at the aqueous interface. While the position of the excess electron does not change during our ~60 ps simulation, the lithium cation diffuses from its initial position in the SiO 2 subsurface toward the interface and eventually leaches out of the oxide surface and becomes solvated by four water molecules, forming an aqueous Li+- electron complex at the interface. The degree of interaction between the localized electron and the lithium ion controls not only the energy level of the excess electron but also the extent of structural distortion and hydrogen-bonding at the interface. The results of our study can be relevant for understanding the initial stages of glass corrosion, where alkali ions are leached from the surface region by interactions with water.
WO 3 /CuWO 4 Ratio Controls Open-Circuit Photovoltage and Photocurrent in Type II Heterojunction Solar Fuel Photoelectrodes
WO 3 /CuWO 4 photoelectrodes for the oxygen evolution reaction benefit from a type II heterojunction for charge separation. However, the impact of the WO 3 /CuWO 4 ratio on the photocurrent and the photovoltage is not clear. To probe the effect of composition, Cu x W 1-x O y thin films with variable W:Cu ratio were prepared on FTO by reactive magnetron co-sputtering of W and Cu, followed by air annealing at 500ºC. EDS, XRD, Rietveld refinement, and Raman spectroscopy confirm the presence of crystalline WO 3 and CuWO 4 in the W rich films and increasing amounts of amorphous copper oxides in the Cu rich films. Bandgaps were determined by optical absorption spectroscopy, surface photovoltage spectroscopy (SPS), and photoaction spectra and are found to decrease from 2.7 eV to 1.2 eV with increasing copper oxide content. SPS reveals n-type semiconductor photoanode behavior for WO 3 /CuWO 4 samples and p-type photocathode behavior for CuO x rich films. Photoelectrochemical experiments confirm stable water oxidation with Faraday efficiency near unity for all W rich films and photocurrents that are increasing with CuWO 4 content. Optimal performance is seen for WO 3 /CuWO 4 mixed phases containing 47-75 mass% CuWO 4 . These compositions maximize charge separation at the type II heterojunction interface between the two materials. Additionally, according to incident photon to current efficiency (IPCE) data, the WO 3 improves photon conversion below 350 nm, while CuWO 4 improves conversion at 450-525 nm. Overall, this work shows for the first time how the WO 3 /CuWO 4 ratio controls the photovoltage and the photocurrent in type II heterojunction solar fuel photoelectrodes, and how copper oxides in the copper rich films severely degrade the performance. Furthermore, these results are useful in the context of bulk-heterojunction electrodes for the conversion of solar energy into fuels.
A Review on Challenges and Successes in Atomic-Scale Design of Catalysts for Electrochemical Synthesis of Hydrogen Peroxide
Hydrogen peroxide is a valuable chemical oxidant with a wide range of applications in a variety of industrial processes, especially in water sanitization. Electrochemical synthesis of hydrogen peroxide (H 2 O 2 ) through a two-electron oxygen reduction reaction (2e-ORR) or a two-electron water oxidation reaction (2e-WOR) has emerged as an appealing process for onsite production of this chemically valuable oxidant. On-site produced H 2 O 2 can be applied for wastewater treatment in remote locations or any applications where H 2 O 2 is needed as an oxidizing agent. Overall, this Review studies the theoretical efforts in understanding the challenges in catalysis for electrochemical synthesis of H 2 O 2 as well as providing design principles for more efficient catalyst materials.
Light-dependent hydrogen production by C. reinhardi
The activity of hydrogenase in nonsynchronous, photoheterotrophically grown cells of C. reinhardi is a function of culture age. Rapidly growing cultures (exponential phase) exhibit lower hydrogenase activity than early stationary phase cultures. During prolonged dark anaerobic incubation the hydrogenase activity attains a maximal value in two to five hours. The activity declines rapidly after three to four hours of anaerobic incubation unless the pH of the suspending medium is maintained above 6.0. In C. reinhardi the source of electrons for hydrogen photoproduction appears to be derived mainly from water oxidation. However, when the water-splitting complex of photosystem II is impaired by a mutational block, the organism can utilize intracellular organic reductants as substrate for H2 production in a light-dependent reaction involving both PSII and PSI. When photosynthetic electron transport is uncoupled from phosphorylation, a rate of 174 micromoles of hydrogen evolved per mg cells per hour is observed. This rate of hydrogen photoproduction corresponds to 76% of the reductant generating capacity of PSII under steady-state photosynthesis.
Catalytic Reduction of Graphene Oxide Membranes and Water Selective Channel Formation in Water–Alcohol Separations
Graphene oxide (GO) is a promising membrane system for chemical separation applications due to its 2-D nanofluidics properties and an ability to control interplanar spacing for selectivity. The permeance of water, methanol (MeOH) and isopropyl alcohol (IPA) through 5 µm thick membranes was found to be 0.38 ± 0.15, 0.33 ± 0.16 and 0.42 ± 0.31 LMH/bar (liter/m2·h·bar), respectively. Interestingly, the permeance of a water–alcohol mixture was found to be dramatically lower (~0.01 LMH/bar) than any of its components. Upon removing the solvent mixture, the transmembrane flux of the pure solvent was recovered to near the original permeance. The interlayer space of a dried GO membrane was found to be 8.52 Å, which increased to 12.19 Å. 13.26 Å and 16.20 Å upon addition of water, MeOH and IPA. A decrease in d-space, about 2 Å, was consistently observed when adding alcohol to water wetted GO membrane and an optical color change and reduction in permeance. A newly proposed mechanism of a partial reduction of GO through a catalytic reaction with the water–alcohol mixture is consistent with experimental observations.
Reimagining the $e_g$ 1 Electronic State in Oxygen Evolution Catalysis: Oxidation-State-Modulated Superlattices as a New Type of Heterostructure for Maximizing Catalysis
We report that the discovery of solid-phase, inexpensive transition-metal-based water oxidation catalysts is a central goal for renewable energy, and has led to a general consensus that a partially populated metal e g d-electronic state is desirable, leading to favorable catalysis for certain elements in specific oxidation states. In manganese systems, the key species is manganese(III), whose high-spin d 4 electronic configuration places an unpaired electron in the e g orbital, which is postulated to contribute to electronic and structural features that support catalysis. Based on density functional theory calculations, it is predicted that electron transfer would be facilitated by a catalyst with alternating low- and high-Mn III -content sheets, which positions neighboring band edges in closer energetic proximity. The preparation of such catalysts is demonstrated for the first time and it is shown that the catalytic activity is maximized in these systems over more uniform, but more Mn III -rich systems. The best catalyst possesses alternating high-and low-average oxidation state sheets with interlayer Cs + ions, and has an overpotential of 450 mV at 10 mA, which represents an improvement of 250 mV over the best unmodified synthetic potassium birnessites. Using scanning tunneling spectroscopy, bandgap modulations consistent with the theoretically predicted band edge shifts are detected.
Dicyanobenzothiadiazole (DCBT) Organic Dye as a Visible Light Absorbing Strong Photoinduced Oxidant with a 16 Microsecond Long–Lived Excited State
Strong photoinduced oxidants are important to organic synthesis and solar energy conversion, to chemical fuels or electric. For these applications, visible light absorption is important to solar energy conversion and long–lived excited states are needed to drive catalysis. With respect to these desirable qualities, a series of five 5,6–dicyano[2,1,3]benzothiadiazole (DCBT) dyes are examined as organic chromophores that can serve as strong photooxidants in catalytic systems. The series utilizes a DCBT core with aryl groups on the periphery with varying electron donation strengths relative to the core. The dyes are studied via both steady–state and transient absorption and emission studies. Additionally, computational analysis, voltammetry, crystallography, and absorption spectroelectrochemistry are also used to better understand the behavior of these dyes. Ultimately, a strong photooxidant is arrived at with an exceptionally long excited state lifetime for an organic chromophore of 16 µs. Finally, the long–lived excited state photosensitizer is well–suited for use in catalysis, and visible light driven photosensitized water oxidation is demonstrated using a water–soluble photosensitizer.
Synergic Effects of Surface Chemistry and Applied Potentials on the Kinetics of the Electrocatalytic Oxygen Evolution Reaction in IrO 2
Improving the efficacy of the oxygen evolution reaction (OER) through water oxidation is critical for advancing photoelectrochemical water splitting. Among the catalysts, IrO 2 exhibits a high OER catalytic activity and stability under acidic conditions. The OER mechanism in this system has been a topic of intense research; however, many mechanistic understandings are lacking. In this work, we carried out first-principles calculations with an implicit solvation model at a constant potential to study the OER behavior on the IrO 2 (110) surface. We find that the surface hydrogen coverage has a significant effect on OER kinetics and transition states. We then develop a microkinetics model that accounts for the continuous evolution of both OER activation energy and hydrogen coverage as a function of an applied potential. We show that this inclusion leads to significant improvement in the simulated Tafel plot compared to available experiments. In conclusion, our results point to a complex interplay between surface chemistry and the applied potential on OER kinetics.
Supercritical water desalination and oxidation (SCWDO): Effectiveness on complex solutions, technoeconomic, and CO 2 impact for produced water treatment
The modern energy-economy is increasingly causing the production of highly saline brines, including from produced water. Supercritical water desalination can concentrate and extract minerals from these brines, but the effects of mixed salt interactions, organic degradation with additives, and the technology's economics are not well understood at supercritical condition. The present study evaluated and experimentally studied an integrated supercritical water desalination and oxidation (SCWDO) process for treating real-produced water samples from oil/natural gas field. The complex interactions between the various anions and cations in produced water were extensively evaluated. Most of the divalent and trivalent ions were extracted below 250 °C while the majority of the monovalent salt were removed between 380 to 410 °C. The treated real produced water was of drinking water quality, with <500 mg/l of total dissolved solid (TDS) and with 100% organics removal. Furthermore, the heat liberated during the organic oxidation could be utilized internally and for electricity generation for enhanced the energy efficiency and lower cost of produced water treatment. With system optimization, the proposed SCWDO process can essentially be made a net zero energy process. A novel process flow diagram for the commercial scale self-powered hybrid SCWDO technology was proposed as a cost-effective produced water treatment to mitigate the environmental crises. Techno-economic analysis showed that produced water treatment cost with SCWDO can be reduced to 2–3 $/m 3 and can be up to 60 % cheaper to traditional deep well reinjection. Additionally, the proposed SCWDO process could achieve net negative CO 2 emission.
Integrating computation and experiment to investigate photoelectrodes for solar water splitting at the microscopic scale.
CONSPECTUS: Photoelectrochemical water-splitting is a promising and sustainable way to store the energy of the sun in chemical bonds and use it to produce hydrogen gas, a clean fuel. The key components in photoelectrochemical cells (PECs) are photoelectrodes, including a photocathode that reduces water to hydrogen gas and a photoanode that oxidizes water to oxygen gas. Materials used in photoelectrodes for PECs must effectively absorb sunlight, yield photogenerated carriers, and exhibit electronic properties that enable the efficient shuttling of carriers to the surface to participate in relevant water-splitting reactions. Discovering and understanding the key characteristics of optimal photoelectrode materials is paramount to the realization of PEC technologies. Oxide-based photoelectrodes can satisfy many of these materials requirements, including stability in aqueous environments, band edges with reasonable alignment with the redox potentials for water splitting, and ease of synthesis. However, oxide photoelectrodes generally suffer from poor charge transport properties and considerable bulk electron-hole separation, and they have relatively large band gaps. Numerous strategies have been proposed to improve these aspects and understand how these improvements are reflected in the photoelectrochemical performance. Unfortunately, the structural and compositional complexity of multinary oxides accompanied by the inherent complexity of photoelectrochemical processes makes it challenging to understand the individual effects of composition, structure, and defects in the bulk and on the surface on a material's photoelectrochemical properties. The integration of experiment and theory has great potential to increase our atomic-level understanding of structure-composition-property relationships in oxide photoelectrodes. In this Account, we describe how integrating experiment and theory is beneficial for achieving scientific insights at the microscopic scale. We highlight studies focused on understanding the role of (i) bulk composition via solid-state solutions, intercalation, and comparison with isoelectronic compounds, (ii) dopants for both the anion and cation and their interactions with oxygen vacancies, and (iii) surface/interface structure in the photocurrent generation and photoelectrochemical performance in oxide photoelectrodes. In each instance, we outline strategies and considerations for integrating experiment and theory and describe how this integration led to valuable insights and new directions in uncovering structure-composition-property relationships. Our aim is to demonstrate the unique value of combining experiment and theory in studying photoelectrodes and to encourage the continued effort to bring experiment and theory in closer step with each other.
Plasmon-Assisted Electrochemical Epoxidation using Water as an Oxidant
Olefin epoxidation, an important industrial reaction, often uses hazardous oxidants, causing challenges in waste disposal. Here, we demonstrate the use of water as an oxidant by a plasmon-assisted electrochemical strategy. The electrocatalyst is comprised of a hybrid of a water oxidation catalyst, manganese oxide, and plasmonic gold nanoparticles. Visible-light irradiation of the electrocatalyst enhanced the epoxidation of 4-styrenesulfonate 5-fold as compared to dark conditions at the same temperature. From electrochemical analyses conducted under plasmon excitation conditions, complemented by real-time time-dependent density functional tight binding simulations, it is found that the plasmonic boost of the electrochemical styrene epoxidation is due to energetic holes generated by the excitation of localized surface plasmon resonances of gold nanoparticles. These photogenerated holes activate adsorbed water for oxidation and enhance the binding of 4-styrenesulfonate at interfacial sites. Here, this work demonstrates a proof of concept and establishes the mechanistic basis for plasmon-assisted activation of water as an O atom source for electrochemical epoxidations.
Supported Oxygen Evolution Catalysts by Design: Toward Lower Precious Metal Loading and Improved Conductivity in Proton Exchange Membrane Water Electrolyzers
Reducing the precious metal content of water oxidation catalysts for proton-exchange-membrane water electrolyzers remains a critical barrier to their large-scale deployment. Herein, we present an engineered architecture for supported iridium catalysts, which enables decreased precious metal content and improved activity and conductivity. The improvement in performance at lower precious metal loading is realized by the deposition of a conformal layer of platinum nanoparticles on titanium dioxide (TiO 2 ) using a facile photoreduction method to prepare conductive layer coated supports (CCSs). Platinum nanoparticles are homogeneously dispersed on TiO 2 , and the conductivity of the subsequent catalysts with 39 wt % precious group metal loadings is significantly higher than the commercial 75 wt % loaded IrO 2 -TiO 2 catalysts. The conformal conductive layer also maintains an enhanced conductivity and electrochemical activity upon thermal annealing when compared to catalysts without the conductive layer and nonconformal heterogeneous conductive layer. The iridium mass activity from half-cell studies shows a 141% improvement for CCS supported catalysts at 42% lower loadings compared to the commercial catalysts. The conductive layer also improves the single cell electrolyzer performance at a similar catalyst loading in comparison to a commercial state-of-the-art catalyst. Here, we correlate the physical properties of the engineered catalysts with their electrochemical performance in electrolyzers to understand structure-activity relationships, and we anticipate further performance improvements upon synthesis and materials optimizations.
Pathways for Electron Transfer at MgO–Water Interfaces from Ab Initio Molecular Dynamics
The nature of electron transfer across metal oxide–water interfaces depends significantly on the band gap of the oxide and its band edge energies relative to the potentials of relevant aqueous redox couples. Here we focus on the water interface with MgO, a prototypical wide band gap oxide whose conduction band edge is close in energy to that of water. We investigate the behavior of an excess electron at and out of equilibrium near the interface using ab initio molecular dynamics based on hybrid density functional theory. Our simulations show that under equilibrium conditions the excess electron (donated by an Al impurity in MgO) localizes to a midgap defect state comparable in energy and shape to a hydrated electron in bulk water. To characterize the electron transfer from the conduction band of MgO to interfacial product states, we dope near-equilibrium configurations of the pristine MgO–water system with Al and run short trajectories of these instantaneously out-of-equilibrium systems. Here we observe two distinct products associated with the excess electron: a surface-localized electron (e surf –) and an aqueous hydrogen radical (H • ). The H • pathway exhibits a much higher activation barrier despite being more exoergic, making e surf – the kinetic product. Our characterization of the pathways on the basis of Marcus theory is consistent with the poor observed utility of MgO for water radiolysis. Moreover, we anticipate that the computational framework employed here will be broadly applicable to assessing electron transfer mechanisms at aqueous, photocatalytic interfaces.