Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Water Management”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Monitoring Well Abandonment Completion Report for KARS Park1, Mobil Service Station, and Hypergol Maintenance Material North Solid Waste Management Units: 084, 093, and 090

The intended purpose of the Monitoring Well Abandonment project is to support the Kennedy Space Center (KSC) Environmental Remediation Department’s Resource Conservation and Recovery Act Program by abandoning monitoring wells throughout KSC that have been identified and prioritized as locations that no longer serve usefulness to program. The monitoring wells were abandoned in accordance with the Brevard County Health Departments and St. Johns River Water Management Districts rules and guidelines.

Timothy M Jellett↗

Hydrologic land use classification of the Patuxent River watershed using remotely sensed data

The Patuxent River Watershed is located in central Maryland between Baltimore and Washington, D.C. and is approximately 2330 sq km in area and 175 km long. This region is now at a critical point because of major concerns such as water management and quality, flooding and land use within the watershed. Data from the NASA-directed LANDSAT and Earth Resources Aircraft Programs were used to provide a new dimension in information collection and processing for the management of watersheds. Digital data from LANDSAT-1 were analyzed along with selected IR photography from U-2 flight number 74-060B taken 28 April 1974, which was digitized in three channels. Processing of the data was accomplished using a multispectral analysis system. Land use themes consisting of surface water, wetlands, forest, residential, cropland/pasture, urban, and extractive were developed and delineated through the watershed. Area measurements of watershed themes were obtained and will serve as a calibration input to a deterministic hydrologic model on a sub-watershed. Using the derived residential and urban theme areas from LANDSAT an estimated basin imperviousness was also calculated. Thematic maps were produced at 1:62,500 scale. Floodprone areas were also classified and delineated at a scale of 1:24,000. Comparison with standard floodprone area maps at the same scale have indicated a few areas of discrepancy. Such information can be used for updating or checking floodprone area boundaries as well as monitoring changes in floodplain areas.

Dallam, W. C.↗

Montana Water Resources II: Enhancing a Moisture Index for Drought and Flood Monitoring in the Missouri River Basin

The Missouri River Basin is a major global breadbasket, containing large amounts of agricultural land. Recent devastating weather events have motivated regional organizations to dedicate efforts to drought and flood monitoring and early warning systems. The DEVELOP team partnered with the following organizations: Montana Climate Office, NOAA National Weather Service (NWS) Missouri Basin River Forecast Center, NOAA Regional Climate Services of the Central Region, NOAA Physical Sciences Laboratory, and the US Army Corps of Engineers' Missouri River Basin Water Management Division. The team collaborated with the partners in their efforts to monitor flood and drought by enhancing a composite moisture index (CMI) for the Missouri River Basin. The CMI leverages NASA Earth observations to derive snow cover data from the Terra Moderate Resolution Imaging Spectroradiometer (MODIS) mission and snow water equivalent and snowdepth datasets from the NOAA NWS National Operational Hydrologic Remote Sensing Center’s Snow Data Assimilation System (SNODAS). Building upon this framework, the team added groundwater storage data from the Gravity Recovery and Climate Experiment (GRACE) and GRACE Follow-On missions, soil moisture data from Soil Moisture Active Passive (SMAP), and United States Geological Survey in situ streamflow data to the CMI. To test the tool’s validity, the team compared the CMI results to historically extreme dry and extreme wet years, March 2017 and March 2019, respectively. The CMI accurately reflects both 2017 and 2019 climate conditions in the Missouri River Basin. The refined CMI enhances the understanding of antecedent soil moisture conditions and improves flood and drought forecasting in the Missouri River Basin before the growing season.

Chloe Schneider↗

Symposium on Machine Processing of Remotely Sensed Data, Purdue University, West Lafayette, Ind., June 29-July 1, 1976, Proceedings

Papers are presented on the applicability of Landsat data to water management and control needs, IBIS, a geographic information system based on digital image processing and image raster datatype, and the Image Data Access Method (IDAM) for the Earth Resources Interactive Processing System. Attention is also given to the Prototype Classification and Mensuration System (PROCAMS) applied to agricultural data, the use of Landsat for water quality monitoring in North Carolina, and the analysis of geophysical remote sensing data using multivariate pattern recognition. The Illinois crop-acreage estimation experiment, the Pacific Northwest Resources Inventory Demonstration, and the effects of spatial misregistration on multispectral recognition are also considered. Individual items are announced in this issue.

Source record↗

Hydrologic applications of ERTS-1 data collection system in central Arizona

The Earth Resources Technology Satellite (ERTS-1) Data Collection System (DCS) was used to relay hydrologic data (streamflow rates, precipitation amounts, soil and air temperature, and snow-moisture content) from remote sites in central Arizona to those responsible for reservoir management. The ERTS-DCS was utilized to furnish near-real time information on snow-moisture content and streamflow rates to the Salt River Project for use in the management and operation of reservoirs on the Salt and Verde Rivers. The Salt River Project, aided by near-real time hydrologic data furnished by both microwave and ERTS-telemetry, was successful in predicting the volume of runoff into the reservoirs. Serious flooding in the downstream Phoenix metropolitan area was prevented by prudent water management.

Schumann, H. H.↗

Quantifying Water Storage Change and Land Subsidence Induced by Reservoir Impoundment Using GRACE, Landsat, and GPS Data

The construction of hydropower dams is a common strategy to support a country's increasing need for electricityand river water management for industry and agriculture. Although the hydrological and geophysical impacts ofwater relocation are usually assessed prior to impoundment, their accuracy is generally limited due to the lack ofin situ observations, especially in a remote area. This study presents a workflow to quantify the terrestrial waterstorage change (TWS) and land subsidence induced by a reservoir's water impoundment using multiple satelliteobservations (GRACE, Landsat), land surface models (CABLE, GLDAS, NCEP, ECMWF), and GPS data. The studysite is the Bakun Dam, located in Sarawak, Malaysia, which is the largest hydropower dam in Southeast Asia.Commencing operation in late 2010, the dam induced a change of water mass and lake surface area that wasclearly observed by GRACE and Landsat observations, respectively. During the 17-month impounding period(from August 2010 to December 2011), GRACE observed a dramatic increase of approximately 200mmequivalent water height, while Landsat detected an increased lake extent of around 600 km2. In this paper, aforward model is developed to determine the increased water surface level corresponding to GRACE observations,estimated to be about 120 m. In contrast to GRACE, the TWS derived from land surface models cannotcapture the increased TWS, due to the lack of reservoir routing algorithms in the models. In addition, the landsubsidence was calculated using the disk load model constructed based on the GRACE-derived lake level andLandsat-derived lake extent; the result is validated with the GPS data from BIN1 station, located at the westerncoast of Borneo. The commencement stage of the Bakun Dam induces the large-scale land subsidence, whichcauses the GPS-BIN1 station to subside by ~9 mm, and move toward the Bakun Lake by ~4 mm. Computation ofthe surface displacements directly from GRACE spherical harmonic coefficient data fails to capture the subsidencefeature, mainly due to the truncation error. Overall, this study demonstrates that evaluating GRACE inconjunction with Landsat, LSMs, and GPS data allows the exploitation of the gravity signal at a much smallerspatial scale than its intrinsic resolution. Benefiting from global coverage, the newly developed satellite-basedalgorithm is a valuable tool for assessing the impacts of reservoir operation on hydrological and geophysicalchanges from local to regional scales.

Tangdamrongsub, Natthachet↗

Memory Metals

Under contract to NASA during preparations for the space station, Memry Technologies Inc. investigated shape memory effect (SME). SME is a characteristic of certain metal alloys that can change shape in response to temperature variations. In the late 1980s and early 1990s, Memry used its NASA-acquired expertise to produce a line of home and industrial safety products, and refined the technology in the mid-1990s. Among the new products they developed are three MemrySafe units which prevent scalding from faucets. Each system contains a small valve that reacts to temperature, not pressure. When the water reaches dangerous temperatures, the unit reduces the flow to a trickle; when the scalding temperature subsides, the unit restores normal flow. Other products are the FIRECHEK 2 and 4, heat-activated shutoff valves for industrial process lines, which sense excessive heat and cut off pneumatic pressure. The newest of these products is Memry's Demand Management Water Heater which shifts the electricity requirement from peak to off-peak demands, conserving energy and money.

Source record↗

Development of an Adsorption System for the Trash Compaction Processing System designed for operation in the International Space Station Express Rack

A water recovery system that utilizes adsorption to work with the Trash Compaction Processing System, formerly known as the Heat Melt Compactor, is being designed at NASA Ames Research Center as an option to current state of the art micro-gravity water management systems and contaminant control systems used in space. The adsorption system will be used in conjunction with the International Space Station Vacuum Exhaust system to avoid both the complexities of gas liquid phase separation in micro-gravity and venting of Trash Compaction Processing System effluents to the spacecraft cabin. The adsorption system will allow the water and gaseous effluents generated during the Trash Compaction System operation to be removed in a matter that meets the Vacuum Exhaust System venting rate requirements. The Trash Compaction Processing System is planned to fly as a Technology Demonstration on the International Space Station in the space station EXPRESS Rack facility. This paper describes the trade space that the adsorption system must operate in using the EXPRESS Rack facilities resources including the use of the Space Station Vacuum Exhaust System. Also described in this paper are design solutions to allow the adsorption system to function within the Express Rack and Vacuum Exhaust System Parameters.

Heat Melt Compactor↗

Implementation and Evaluation of Irrigation Techniques in the Community Land Model

Several previous studies have highlighted the irrigation-induced impacts on the global and regional water cycle, energy budget, and near-surface climate. While land models are widely used to address this question, the implementations of irrigation in these models vary in complexity. Here, we expand the representation of irrigation in Community Land Model to enable six different irrigation methods. We find that using a combination of irrigation methods, including default, sprinkler, flood and paddy techniques performs best as determined by evaluating the simulated irrigation water withdrawals against observations, and therefore select this combination as the new irrigation scheme. Then, the impact of the new irrigation scheme on surface fluxes is evaluated and detected using single-point simulations. Finally, the global and regional irrigation-induced impacts on surface energy and water fluxes are compared using both the original and the new irrigation scheme. The new irrigation scheme substantially reduces the bias and root-mean-square error of simulated irrigation water withdrawal in the USA and other countries, but considerably overestimates withdrawals in Central China. Results of single-point experiments show that different irrigation methods have different effects on surface fluxes, while the magnitudes are small. At the global scale, the new scheme enlarges the irrigation-induced impacts on water and energy variables relative to the original scheme, with varying magnitudes across regions. Overall, our results suggest that this newly developed scheme is a better tool for simulating irrigation-induced impacts on climate, and highlight the added value of incorporating human water management in Earth system models.

Community land models↗

QuEST: Qualifying Environmentally Sustainable Technologies, Volume 5

This edition of the QuEST newsletter contains brief articles that discuss the NASA Technology Evaluation for Environmental Risk Mitigation (TEERM) program, and the importance of collaboration, efforts in materials management and substitution for coatings for launch structures, Low volatile organic compound (VOC) Coatings Field Testing, Non-Chrome Coating Systems, Life Cycle Corrosion Testing, Lead-Free Electronics Testing and Corn Based Depainting and efforts in Pollution Control in the area of Hypergolic Propellant Destruction Evaluation, efforts in development of alternative energy in particular Hydrogen Sensors, Energy and Water Management, and efforts in remediation in the removal of Polychlorinated Biphenyl (PCB) contamination

Lewis, Pattie↗

Drought Monitoring with Drones: A Hundred Fields at a Time

Drought frequency and severity are likely to increase due to global warming. Droughts already have a substantial negative influence on agriculture and the economy and finding ways to reduce their effects could have a monumental impact. Although NASA already has satellites deployed to collect drought data, these satellites are more for global drought indexing than local. To alleviate droughts on a local level, this paper proposes the use of drones to map soil moisture, plant health, and other drought indicators. The proposed drone design is a fixed-wing UAV equipped with a hyperspectral camera, a LiDAR sensor, and an array of weather sensors. These tools will permit it to reliably capture the necessary data to enhance suggestions on improving drought management practices. The collected data from the drones will be deployable in many ways, including for agricultural and non-agricultural applications. The hyperspectral camera has applications in monitoring the health of crops within a field to direct relief measures to the crops most in need. Thermal and LiDAR imaging can be deployed for locating leaks, predicting shortages of water bodies, and determining a field’s water needs. To implement a drought-monitoring drone, the recommended steps include building a prototype drone design that is equipped with the outlined instruments. The prototype drone could then be deployed to collect training data to guide a neural network that would provide interpretations and predictions from the data for users. After the prototype design is iterated upon, it will be ready for deployment and inform water management methods to serve the world in our battle against drought.

climate change↗

Status of the Space Station water reclamation and management subsystem design concept

A development status report is presented for the NASA Space Station's water reclamation and management (WRM) system, for which the candidate phase change-employing processing technologies are an air evaporation subsystem, a thermoelectric integrated membrane evaporation subsystem, and the vapor compression distillation subsystem. These WRM candidates employ evaporation to effect water removal from contaminants, but differ in their control of the vapor/liquid interface in zero-gravity and in the recovery of the latent heat of vaporization.

Bagdigian, R. M.↗

CropManage Application for Vineyard Irrigation Decision-Support

CropManage is a free web-application developed by U.C. Cooperative Extension to support evapotranspiration based irrigation scheduling and nutrient management for major specialty crops. Prescribed phenology curves are used to develop daily estimates of canopy cover within a given field, based on days since planting (annual crops) or budbreak (trees, vines). These curves are modulated by a MaxCan parameter representing seasonal maximum canopy cover. Crop development observations can be used to adjust for such factors as weather anomalies or non-standard agronomic practice, as needed. Canopy cover is converted to crop coefficient and combined with reference evapotranspiration to derive daily water consumption. Guidance on crop water requirement is then conveyed to users in terms of system runtime issued on-demand for a given date, largely based on total evapotranspiration since last irrigation event. In this study, CropManage was adapted to vineyards by adding modules accounting for early-season soil moisture depletion and cover crop presence. A crop stress parameter was added to accommodate deficit irrigation practice, allowing the user to specify percentage departure from full water requirement along with start/stop dates. An initial verification exercise was performed on three winegrape vineyards located in California’s Central Coast (2020), North Coast (2020) and Central Valley (2019). Daily crop evapotranspiration was monitored by eddy-covariance fluxtowers. MaxCan was measured by ground and satellite observation. Stress regime was specified by grower practice where available, otherwise stress levels were inferred from applied water records. Mean absolute error and mean bias error of modeled cumulative evapotranspiration were computed with respect to the eddy covariance measurements collected throughout the growing season. Results indicate the modified CropManage water management module performs reasonably well for winegrape. Additional effort is planned to modify the nutrient module for vineyard use.

CropManage↗

Derivation and Testing of Consumptive Water Use Fraction for Specialty Crops

The Crop Consumptive Use Fraction (CCUF) expresses beneficial water use in the form of seasonal evapotranspiration of applied water (ETAW), relative to total irrigation volume. The metric is an indicator of the efficiency of agricultural water use and is a recommended component for preparation of agricultural water management plans in California. An FAO-56 based web application has been developed to facilitate retrospective evaluation of ETAW, and hence CCUF, at field level. The current application is optimized for prevailing climate in four of the state’s main growing regions: San Joaquin Valley, Sacramento Valley, Central Coast, and North Coast. User inputs include crop type, soil texture, irrigation method, daily irrigation volume, daily rainfall, and seasonal start/stop dates to define the analysis period. Time series of fractional green canopy cover (Fc), based on Landsat and Sentinel-2 Earth-resource satellite observations, are imported from NASA’s Satellite Irrigation Management Support (SIMS) system. Grass reference evapotranspiration (ETo) time series are accessed from Spatial CIMIS (California Irrigation Management Information System). Daily crop height (h) is estimated as a simple function of typical maximum height for the given crop type (from FAO-56) and Fc. A vegetation density coefficient (Kd) is derived from Fc and h. Stomatal control factors during mid-and late-season are applied to tree and vine crops. Typical values for minimum daily relative humidity and mean daily windspeed, derived from historical CIMIS weather data, are used to correct for regional deviations from standard climate (defined as RHmin=45%, windspeed =2m/s). The resulting daily basal crop coefficient (Kcb) represents the ET of a well-watered crop with minimal soil evaporation, relative to ETo. A soil water balance sub-model for the top 0.1 m is used to calculate daily evaporation coefficients (Ke). A second sub-model applies to the root zone to calculate crop water stress coefficients (Ks) and effective precipitation (Pe), which is the fraction of rainfall that is available for crop use. Those coefficients are combined with Kcb and ETo to calculate daily ETc. ETAW is then derived as cumulative ETc less cumulative Pe. For verification purposes, sensor installations were used to measure seasonal ETc in commercial fields for several annual and perennial specialty crops by soil water balance and energy balance methods. Model estimates of seasonal ETc show mean absolute error of <10% compared to the ground measurements.

Derivation↗

Space Life-Support Engineering Program

This report covers the seventeen months of work performed under an extended one year NASA University Grant awarded to Iowa State University to perform research on topics relating to the development of closed-loop long-term life support systems with the initial principal focus on space water management. In the first phase of the program, investigators from chemistry and chemical engineering with demonstrated expertise in systems analysis, thermodynamics, analytical chemistry and instrumentation, performed research and development in two major related areas; the development of low-cost, accurate, and durable sensors for trace chemical and biological species, and the development of unsteady-state simulation packages for use in the development and optimization of control systems for life support systems. In the second year of the program, emphasis was redirected towards concentrating on the development of dynamic simulation techniques and software and on performing a thermodynamic systems analysis, centered on availability or energy analysis, in an effort to begin optimizing the systems needed for water purification. The third year of the program, the subject of this report, was devoted to the analysis of the water balance for the interaction between humans and the life support system during space flight and exercise, to analysis of the cardiopulmonary systems of humans during space flight, and to analysis of entropy production during operation of the air recovery system during space flight.

Seagrave, Richard C.↗

Definition of a Technology Validation Mission for P-band Reflectometry using Signals of Opportunity

Root-Zone Soil Moisture (RZSM) (moisture profile in the top meter of soil) and Snow Water Equivalent (SWE) (total snow pack water content) are identified as priority target variables in the ESAS 2017 decadal survey [1] with critical roles in hydrology and water management. RZSM estimates are vital for understanding multiple Earth system processes and forecasting (for example, droughts [2]). Simultaneous knowledge of surface and RZSM could enable a breakthrough in estimating key unobserved hydrologic fluxes and reduce uncertainty in net ecosystem exchange (NEE), carbon balance [3] discharge estimates, and crop yield forecasts [4] .With the high albedo and insulating properties of snow, monitoring, SWE accumulation would provide a key constraint on the potential runoff during spring ablation while monitoring SWE disappearance rates would provide a key constraint on SWE partition into runoff vs. infiltration/recharge. [5] demonstrated that knowledge of early-spring SWE generally contributes most to streamflow forecast skill in the Western U.S. SWE is also a source of water storage that provides the water resources during spring snowmelt. Despite such potentially transformative contributions, accurate RZSM and SWE measurements are unattainable with current technology. While active/passive L-band methods (e.g. SMAP, SMOS) can reliably retrieve surface soil moisture in the top 5 cm of soil [6], [7]. RZSM estimates are only available through model assimilation of brightness temperatures with a radiative transfer and land surface models [8]. SWE estimation uses multi-frequency passive microwave techniques (e.g. [9]-[11]), which have significant problems with deeper snow and in forested and mountainous environments [12]. Signals of opportunity (SoOp) in P-band (200-400 MHz) is a new remote sensing technique with the capability of estimating both essential hydrologic variables, RZSM and SWE, circumventing many of the aforementioned limitations under all weather conditions day and night. SoOp is the re-utilization of existing powerful satellite transmissions within bands allocated for communications or navigation. P-band SoOp sensitivity to soil moisture has been demonstrated in an airborne experiment over Oklahoma in 2016 [13]. Recent theory [14] and experiments [15] have also confirmed that the reflection coefficient phase is proportional to SWE.

Garrison, J. L.↗

Idaho Wildfires II: Assessing the Relationship Between Drought Indicators and Wildfire Risk to Enhance Hazard Modeling and Inform Mitigation Planning

The western United States has experienced twenty years of increased and prolonged drought which have exacerbated wildfire hazards. These jeopardize population centers through increased risks to ecosystem services, local economies, and livelihoods. The Idaho Office of Emergency Management, Water Resources, and Department of Lands are seeking methods to dynamically monitor these conditions and update models that inform hazard mitigation planning and resource allocation. Towards this, these agencies partnered with NASA DEVELOP to produce drought-enhanced wildfire hazard models. Part of a two-term project, the two teams revised the state’s static wildfire hazard model with refined data layers and remotely-sensed data to reflect dynamic ecosystem responses to drought conditions and wildfire potential. Our team distinguished between rangeland and forestland ecosystems, and investigated relationships between drought metrics and vegetation condition using TerrSet Earth Trends Modeler. This analysis determined that total precipitation at a 5-month lag interval (r 2 = 0.72) along with the Evaporative Stress Index (r 2 = 0.69); and precipitation at a 5-month interval (r 2 = 0.42) were important drivers in rangeland and forestland, respectively. These driver variables were incorporated into a temporally dynamic wildfire hazard map. Our team used linear regression to correlate hazard ratings with wildfire frequency. For the year 2020, neither the enhanced hazard model (p < 0.10, r 2 = 0.01) nor the state’s static model (p < 0.05, r 2 = 0.03) were strongly correlated with actual wildfire frequency as they expressed an inverse relationship between wildfire hazard and frequency. This suggests wildfire occurrence is complex and not necessarily driven by the variables used.

Wildfire↗