Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Timescale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Multiscale simulation of integrated energy system and electricity market interactions

Accelerating the deep decarbonization of the world's electric grids requires the coordination of complex energy systems and infrastructures across timescales from seconds to decades. Here, we present a new multiscale simulation framework that integrates process- and grid-centric modeling paradigms to better design, operate, and control integrated energy systems (IESs), which combine multiple technologies, in wholesale energy markets. Traditionally, IESs are analyzed with a process-centric paradigm such as levelized cost of electricity (LCOE) or annualized net revenue, ignoring important interactions with electricity markets. This framework explicitly models the complex interactions between an IES's bidding, scheduling, and control decisions and the energy market's clearing and settlement processes, while incorporating operational uncertainties. Through two case studies, we show the importance of understanding and quantifying complex resource-grid interactions. In case study 1, we demonstrate that optimized bidding from one resource shifts the profit distribution for all energy systems in the market. This result suggests new and more flexible IES technologies can disrupt the economics of all market participants, possibly leading to accelerated retirements of less flexible resources. Interestingly, the optimized bidding has little impact on grid-level aggregate statistics, such as total generation costs and renewable penetration rate. While aggregate modeling strategies may remain valid under some IES adoption scenarios for analysis focused on regional outcomes, direct comparisons of IES technologies at specific locations without considering these interactions may lead to misleading or incorrect conclusions. In case study 2, we consider the design and flexible operation of IESs that hybridize conventional generators with energy storage. Through a sensitivity analysis, we find that as the size of the storage system increases, the total number of start-ups for coal- and natural gas-based IESs reduced by 25% and 33.6%, and the total thermal generator ramping (i.e., mileage) reduced by 86.5% and 62.5%, respectively. This shows the primary benefit of storage may not be reduced operational costs (which do not change significantly) but fewer start-ups and less ramping, which may greatly simplify the design, operation, and control of carbon capture systems. The new modeling and optimization capabilities from this work enable the coupling of rigorous, dynamic process models with grid-level production cost models to quantitatively identify the nuanced interdependencies across these vast timescales that must be addressed to realize clean, safe, and secure energy production. Moreover, the proposed general multiscale simulation framework is applicable to all IES technologies and can be easily extended to consider other energy carriers (e.g., hydrogen, ammonia) and energy infrastructures (e.g., natural gas pipelines).

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Modeling of Hidden Structures Using Sparse Chemical Shift Data from NMR Relaxation Dispersion

NMR relaxation dispersion measurements report on conformational changes occurring on the μs-ms timescale. Chemical shift information derived from relaxation dispersion can be used to generate structural models of weakly populated alternative conformational states. Current methods to obtain such models rely on determining the signs of chemical shift changes between the conformational states, which are difficult to obtain in many situations. Here, we use a “sample and select” method to generate relevant structural models of alternative conformations of the C-terminal-associated region of Escherichia coli dihydrofolate reductase (DHFR), using only unsigned chemical shift changes for backbone amides and carbonyls ( 1 H, 15 N, and 13 C'). We find that CS-Rosetta sampling with unsigned chemical shift changes generates a diversity of structures that are sufficient to characterize a minor conformational state of the C-terminal region of DHFR. The excited state differs from the ground state by a change in secondary structure, consistent with previous predictions from chemical shift hypersurfaces and validated by the x-ray structure of a partially humanized mutant of E. coli DHFR (N23PP/G51PEKN). The results demonstrate that the combination of fragment modeling with sparse chemical shift data can determine the structure of an alternative conformation of DHFR sampled on the μs-ms timescale. Such methods will be useful for characterizing alternative states, which can potentially be used for in silico drug screening, as well as contributing to understanding the role of minor states in biology and molecular evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Coarse-grained molecular dynamics simulation of solvent-dependent cellulose nanofiber interactions

Associations between cellulose are important both in biofuel production and in the use of cellulose for biomaterials. Cellulose nanofibers (CNFs) are sustainable, strong, light-weight alternatives to traditional materials in manufacturing, but are challenging to obtain due to irreversible aggregation in solution during preparative fibrillation. Therefore, it is imperative to understand the underlying factors driving aggregation with a view to designing solvents that can effectively compete with interfiber interactions, hence reducing aggregation. Molecular dynamics (MD) simulation at atomic detail can provide useful information on local interactions. However, the length and timescales accessible are too short to fully capture association processes. Here, we provide a method for accessing the longer length and timescales required using coarse-grained (CG) MD simulations with a MARTINI force field to calculate the interaction behavior of CNFs in three selected solvents: NaOH-urea-water, acetone, and neat water. The CG results are consistent with our prior all-atom MD and with previous experimental results. While acetone is found not to be an effective solvent, urea and ionic moieties in NaOH-urea-water not only solvate the fibrils but also improve the confinement of water molecules around them as shown by the solvent residence times and mean-square displacements. Overall, the presence of urea and ions reduces the likelihood of aggregation in multi-CNF systems relative to neat water irrespective of whether the hydrophobic or hydrophilic CNF surfaces are interacting. In conclusion, the CG method shows clear promise for selecting potential high-performance solvents for experimental prioritization in bioenergy and biomaterials research in a relatively fast manner as well as for understanding the aggregation and rheological behavior of CNF-solvent systems.

aggregation↗
DOE OSTI2025

Simulation and generalized Langevin equation study of lipid subdiffusion in biomembrane phases

In biomembranes lipid mobility exhibits deviations from the classical diffusive behavior of Brownian particles, i.e. ‘anomalous’ diffusion. The question arises as to how this anomalous diffusive behavior varies in gel, ripple, and fluid biomembrane phases. Here, in this study, we perform all-atom molecular dynamics (MD) simulations of dimyristoylphosphatidylcholine (DMPC) bilayers in the three different phases and analyze the results using the framework of the Generalized Langevin Equation (GLE). This analysis emphasizes sub-diffusive behavior on the relatively short, picosecond-nanosecond timescales, capturing local molecular constraints and transient caging effects during the crossover of atomic dynamics from vibrational to incipient anharmonic motion. The ripple and gel phases are found to exhibit strong transient caging and prolonged memory effects resulting in distinct sub-diffusive behavior. The role of hydrogen bonding in lipid confinement is also examined, demonstrating its influence on phase-dependent molecular ordering and on short-time diffusional constraints. These findings demonstrate the GLE framework’s utility in characterizing molecular transport and lipid dynamics, with implications for longer timescale membrane dynamics.

Malik, Sheeba [Oak Ridge National Laboratory (ORNL↗
DOE OSTI2023

Mineral detection of neutrinos and dark matter. A whitepaper

Minerals are solid state nuclear track detectors — nuclear recoils in a mineral leave latent damage to the crystal structure. Depending on the mineral and its temperature, the damage features are retained in the material from minutes (in low-melting point materials such as salts at a few hundred °C) to timescales much larger than the 4.5 Gyr-age of the Solar System (in refractory materials at room temperature). The damage features from the O (50) MeV fission fragments left by spontaneous fission of 238U and other heavy unstable isotopes have long been used for fission track dating of geological samples. Laboratory studies have demonstrated the readout of defects caused by nuclear recoils with energies as small as O (1) keV. This whitepaper discusses a wide range of possible applications of minerals as detectors for E R ≳ O (1) keV nuclear recoils: Using natural minerals, one could use the damage features accumulated over O (10) Myr–O (1) Gyr to measure astrophysical neutrino fluxes (from the Sun, supernovae, or cosmic rays interacting with the atmosphere) as well as search for Dark Matter. Using signals accumulated over months to few-years timescales in laboratory-manufactured minerals, one could measure reactor neutrinos or use them as Dark Matter detectors, potentially with directional sensitivity. Research groups in Europe, Asia, and America have started developing microscopy techniques to read out the O (1)–O (100) damage features in crystals left by O (0.1)–O (100) keV nuclear recoils. We report on the status and plans of these programs. Furthermore, the research program towards the realization of such detectors is highly interdisciplinary, combining geoscience, material science, applied and fundamental physics with techniques from quantum information and Artificial Intelligence.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Universal method for the optimization of HDC coating uniformity on non-planar, non-stationary substrates for inertial confinement fusion targets

The thickness uniformity of chemical vapor deposited (CVD) diamond coatings on non-planar, non-stationary substrates depends on both the intrinsic instantaneous coating thickness distribution (ICTD) of the coating conditions used and, if applicable, on the frequency of substrate reorientation. While important for many CVD diamond applications, the relative impact of the ICTD and substrate reorientation on the coating thickness uniformity has not been studied. In this work, we systematically investigate the effect of these factors for microwave-plasma chemical vapor deposition (MPCVD) of diamond (referred to as high density carbon (HDC) in the inertial confinement fusion (ICF) community) coatings on spherical, rolling substrates. This coating technique is used to fabricate capsules for ICF experiments, which require extreme coating uniformity with <0.3 % thickness variation (so-called Mode 1 or M1) to ensure symmetric compression of imploding targets. To extract the otherwise unobservable reorientation timescale (Δt), Monte Carlo simulations were performed using experimental ICTD data as input. This combined approach confirms scaling relationships between the substrate reorientation timescale as well as coating thickness and coating uniformity, as expected from a 3D random walk. Simulations confirm that M1 is Rayleigh-distributed and scales as (Δt) 1/2 , consistent with the randomization of two angles that determine orientation of a sphere. We also demonstrate that, under the conditions studied, Δt is the dominant factor in determining thickness uniformity while the intrinsic ICTD has minimal impact. Finally, experiments show that Δt can be affected by total batch size under constant agitation conditions due to space constraints that limit the capsule reorientation kinetics. In conclusion, this study highlights the utility of a combined experiment-simulation approach as a general methodology for understanding and improving coating uniformity on non-planar, non-stationary substrates.

Capsule↗
DOE OSTI2022

Controlling pollutant emissions in a high-pressure combustor with fuel-diluent blending

This paper investigates the formation of nitric oxide (NO) and carbon monoxide (CO) emissions as a function of nitrogen (N 2 ) or carbon dioxide (CO 2 ) diluent content, added to a premixed reacting jet in crossflow. Here, reaction characteristics of a rich methane-air jet injected into a lean vitiated crossflow were analyzed at an elevated pressure of 5 atm. The jet was pre-heated and enriched with 0%, 15%, 30%, and 50% mass fraction to quantify the effect on pollutant emissions. Simulated results of the full chemistry Star-CCM+CFD model were verified with data taken in the experimental high-pressure combustion facility, which provides pressure, temperature and velocity profiles, as well as line-of-sight chemiluminescence and exit emission measurements. The analysis revealed the significant influence of the diluent to delay axial combustion; this mixing delay increased the axial flame lift-off and controlled any thermal ignition limitations. Increasing the diluent content increased the timescale for the flame to stabilize, which allowed for greater entrainment of crossflow oxidizer into the axial jet stream, and led to decreased pollutant emissions. Hence, crossflow entrainment is a critical driving force at high diluent content. Local nitric oxide (NO) emission formation in the axial stage was predicted numerically, showing the correlation between diluent addition, axial heat release, and the formation of nitric oxide pollution. The high diluent levels leaned out the jet mixture and delayed axial combustion, while reducing prompt and thermal NOx by mitigating flame hotspots and minimizing the timescale that the products remain at high temperatures.

03 NATURAL GAS↗
DOE OSTI2023

Chronology of alkali anorthosite 14304 clast “b” records basin forming impact at ~3.95 Ga

Alkali-suite rocks constitute one of three major suites of lunar crustal rocks. As such, constraining their formation timescales and petrogenesis is important for understanding the earliest magmatic history of the Moon. However, the magmatic history of alkali-suite rocks is partly obscured by superimposed effects of major basin-forming impact events on the lunar nearside. Consequently, unambiguous crystallization ages of samples from this suite of rocks have not been determined. Here, the aim of this study is to better understand the petrogenetic history of the alkali-suite and the potential superimposed effects of impact metamorphism by determining Sm-Nd, Rb-Sr, and 40 Ar/ 39 Ar ages for an alkali anorthosite clast from Apollo 14 lithic breccia 14304 termed clast “b”. The new chronologic measurements of clast “b” yield concordant Sm-Nd, Rb-Sr, and 40 Ar/ 39 Ar ages of 3947 ± 13 Ma, 3975 ± 34 Ma, and 3937 ± 37 Ma respectively, resulting in a weighted mean age of 3949 ± 11 Ma. This age is not interpreted to date an igneous event related to production of the lunar highlands crust and instead the chronology and petrography of clast “b” are most readily explained by an impact event at ~3.95 Ga that caused near-complete isotopic re-equilibration of the Sm-Nd, Rb-Sr, and 40 Ar/ 39 Ar chronometers. The weighted mean age of 3949 ± 11 Ma of clast “b” is several hundred Ma younger than 4.3–4.4 Ga ages typically determined for samples of other crustal rock suites but in very good agreement with independent estimates for the formation of Imbrium basin ejecta and other marginally older impact events which are thought to have been sampled at the Apollo 14 landing site. Thus, although petrologic and geochemical examination suggest that clast “b” is a pristine igneous clast, its age likely records an impact event at the Apollo 14 landing site. Whereas the various determined ages of clast “b” do not reflect the timescales of alkali-suite magmatism, the relatively low initial Sr and Nd isotopic compositions of clast “b” indicate that its protolith evolved with very low 147 Sm/ 144 Nd and 87 Rb/ 86 Sr that are distinct from estimates for urKREEP but similar to that of lunar plagioclase. This implies that the igneous protolith of clast “b” derived from a plagioclase-dominated KREEP-rich source that must have formed after the formation of the urKREEP source at ~4.35 Ga but well before the impact event recorded by clast “b” at ~3.95 Ga.

58 GEOSCIENCES↗
DOE OSTI2025

Evolving physical and mechanical rock properties during exposure at Earth's surface

Rocks at Earth's surface experience progressive damage due to exposure to environmental conditions. Although environmental damage to rocks is recognized as being time-dependent, our quantitative understanding of its effects on physical and mechanical properties remains limited by field and laboratory studies constrained to short timescales. In this study, we aim to rigorously quantify how these properties evolve under longer natural environmental exposure spanning from the Holocene to the late Pleistocene. We conducted a ‘time series’ analysis of key physical and mechanical rock properties using multiple interior samples from 10 cogenetic granitoid boulders exposed for different amounts of time at two sites in Eastern California, USA. We find that over the late Pleistocene (~30 ka), rocks exhibit porosity increases of 40 ± 4 % and seismic velocity decreases of 7 ± 1 % at both sites. Similarly, over the same time period, rock tensile and compressive strengths declined by an average of 11 ± 4 %, and rock permeability increased on average by 104 ± 50 %. Microscopic analysis of thin sections of the same rocks indicates that microfracture density and intensity also progressively increased over the same timescales. These results suggest that time-dependent fracture propagation due to environmental exposure is likely a central contributor to the observed changes in rock properties. This study provides quantitative documentation that pronounced changes in the physical and mechanical properties of rock progressively occur within thousands of years of exposure.

Critical zone↗
DOE OSTI2026

Activation dynamics of a water-soluble human mu-opioid receptor

The mu-opioid receptor (MOR), a class A G protein-coupled receptor mediates opioid analgesia and remains a central target for pain therapeutics. While crystal structures of MOR exist, they provide limited insight into the receptor’s dynamic conformational landscape underlying function. Here, we engineered a thermostable water-soluble MOR variant (wsMOR) that retains native-like ligand-binding and activation dynamics. This variant enables high-yield production and detailed solution-phase structural studies that are challenging with membrane-embedded MOR, providing a valuable tool for studying receptor activation and aqueous-phase drug screening. Using a combined computational and experimental approach, we performed long-timescale all-atom molecular dynamics simulations together with neutron scattering and single-molecule FRET, revealing a structurally stable receptor with a diverse ensemble of conformations at different temporal resolutions. In the ligand-free state, wsMOR displayed high conformational flexibility, which decreased upon agonist binding, particularly in transmembrane helix 6, a hallmark of G protein-coupled receptor activation. Positive allosteric modulation and G protein binding further stabilized active-like states. These findings highlight wsMOR’s conformational plasticity across picosecond to millisecond timescales and provide a foundation for structure-guided development of next-generation opioid ligands with improved efficacy and safety.

E, Agyemang [University of Tennessee Knoxville]↗
DOE OSTI2024

One-sweep moment-based semi-implicit-explicit integration for gray thermal radiation transport

Thermal radiation transport (TRT) is a time dependent, high dimensional partial integro-differential equation. In practical applications such as inertial confinement fusion, TRT is coupled to other physics such as hydrodynamics, plasmas, etc., and the timescales one is interested in capturing are often much slower than the radiation timescale. As a result, TRT is treated implicitly, and due to its stiffness and high dimensionality, is often a dominant computational cost in multiphysics simulations. Here we develop a new approach for implicit-explicit (IMEX) integration of gray TRT in the deterministic SN setting, which requires only one sweep per stage, with the simplest first-order method requiring only one sweep per time step. The partitioning of equations is done via a moment-based high-order low-order formulation of TRT, where the streaming operator and first two moments are used to capture the asymptotic stiff regimes of the streaming limit and diffusion limit. Absorption-reemission is treated explicitly, and although stiff, is sufficiently damped by the implicit solve that we achieve stable accurate time integration without incorporating the coupling of the high order and low order equations implicitly. Due to nonlinear coupling of the high-order and low-order equations through temperature-dependent opacities, to facilitate IMEX partitioning and higher-order methods, we use a semi-implicit integration approach amenable to nonlinear partitions. In conclusion, results are demonstrated on thick Marshak and crooked pipe benchmark problems, demonstrating orders of magnitude improvement in accuracy and wallclock compared with the standard first-order implicit integration typically used.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Comparison of continuum and cross-core theories of dynamic strain aging

Dynamic strain aging (DSA) is the process of solute atoms segregating around dislocations on the timescale of loading. Continuum theories of DSA derived from elasticity theory have been shown to severely overpredict both the timescale and strengthening of DSA. Recently, cross-core theory was developed to reconcile this gap, invoking a special single-atomic-hop diffusion mechanism across the core of an extended dislocation. In this work, we show that the classical continuum theory expression for the rate of solute segregation is in error. After correcting this error, we show that continuum theory predictions match cross-core theory when the elevated diffusivity near the dislocation core is accounted for. Finally, our findings indicate that continuum theory is still a useful tool for studying dislocation-solute interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Fabrication and thermophysical properties of UO 2 -UB 2 and UO 2 -UB 4 composites sintered via spark plasma sintering

Uranium dioxide (UO 2 ) composites with uranium diboride (UB 2 ) and uranium tetraboride (UB 4 ) have been proposed as advanced fuel candidates due to their high thermal conductivity, high melting point, high fissile density and their ability to incorporate a built-in burnable poison by tailoring the targeted 10 B/ 11 B ratio. As such, it is important to assess the fabrication, and thermal and micromechanical properties of such composites. In this work, UO 2 -UB 2 and UO 2 -UB 4 samples with boride phase fractions of 5, 15 and 30 wt% were fabricated to high densities (above 95 % theoretical density) via spark plasma sintering (SPS). This enabled sintering at relatively low temperatures and short timescales. SPS also aided in maintaining the target phase fractions of the samples as reactions between the constituent phases were suppressed due to the short timescales and reducing environment during sintering. Here, thermal diffusivity measurements from 299 to 1273 K were conducted through laser flash analysis (LFA). The diffusivity increased as a function of boride weight fraction, and UB 2 additions increased the thermal diffusivity of the composites more than UB 4 additions. Assessment of the LFA results indicated in-situ reactions between the UO 2 and boride phases that suppress the thermal diffusivity occur above 800 K for all samples. Oxidation of the boride phase was proposed as the underlying reaction. This was supported by thermodynamic assessments from the literature, as well as microstructural, crystallographic, and nanoindentation characterization performed on these samples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Temporal and spatial separations between spin glass and short-range order

Broken-symmetry-induced order parameters account for many phenomena in physics. For spin glasses, this framework dictates the theoretical construction, whereas experiments have only established dynamical behaviors but not the physical entity. Experimental techniques have limitations when the spin glass is probed as an isolated state. Here, we create an evolution from a long-range order using well-controlled non-magnetic substitution on a sublattice. Neutron magnetic diffuse scattering of pico-second timescale reveals that the dynamics of short- and long-range order formation are not affected by disorder, but their spatial ranges are. Across all specimens, the inflection point of spin correlation length’s temperature dependence fully matches with the peak in heat capacity, while spin glass can freeze at millisecond timescale either above or below this characteristic temperature of spin-order formation. Our results identify the spin glass as single, uncorrelated spins at domain walls between spin clusters, and an uncorrelated coexistence of the two.

Dronova, Margarita G [Okinawa Institute of Science↗
DOE OSTI2022

Holocene paleoclimate change in the western US: The importance of chronology in discerning patterns and drivers

We report sediment in lakes and meadows forms a powerful archive that can be used to reconstruct environmental change through time. Reconstructions of lake level, of chemical, biological, and hydrological conditions, and of surrounding vegetation provide detailed information about past climate conditions, both locally and regionally. Indeed, most of our current knowledge of centennial- to millennial-scale climate variability in the arid western United States, where information about past hydroclimate is particularly important, comes from such sediment-based reconstructions. The pressing need for robust, precise predictions of future conditions is a significant motivation for paleoclimate science, and current research questions frequently require Holocene reconstructions to be resolved at sub-centennial timescales. Increasingly, regional syntheses seek to identify synoptic-scale patterns similar to those defined from modern observations (seasonal, interannual, multi-decadal, etc.) or to compare with the output of climate model simulations. However, the age control on existing records, especially those more than about 20 years old, is often sufficient only for millennial-scale interpretation. Here we assess the age control for 84 published and unpublished records from lakes and meadows in the Great Basin, California, and desert southwest, and use Bayesian modeling to evaluate the 95% uncertainty ranges for the 42 best-dated records. In the Late Holocene, about half of the 42 records have <400-year mean uncertainty ranges; however, high-precision age control is especially critical for young records, used to develop an accurate understanding of a proxy’s response to known climate variations. In the Middle Holocene, records vary from 400 to >800-year mean uncertainty and records of the Early Holocene have 600- to >1400-year mean uncertainty ranges. We find that the largest control on modeled uncertainties is dating density, with at least 2 dates/kyr being optimal and suggest obtaining “range-finder” dates at the onset of a study to better predict the total number of dates needed for an adequate age model. Such a density avoids a commonly observed phenomenon of significant peaks in uncertainty arising in gaps between age control points. Analysis of the uncertainties associated with proxy shifts reveal that more than half are >400 years. Although such large uncertainties currently prevent sub-centennial interpretations in most cases, increased dating density, strategic use of limited funds (including budgeting for a 2 date/kyr minimum at the proposal stage), construction of age-depth models with Bayesian methods, and critical evaluation of chronological uncertainty will shed light on past climate variability at finer timescales, enhancing our understanding of global and regional drivers of western U.S. climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Solid-State Hydroxide Ion Conductivity in Silver(I) Oxide, Ag 2 O

Silver (I) oxide, Ag 2 O, precipitated as microcrystals by combining aqueous silver(I) nitrate and KOH solutions, was found to be a solid-state hydroxide ion conductor with ionic conductivity on the order of 10 -3 S/cm. The proton chemical shifts at 4.87 and -7.35 ppm measured by solid-state 1H-NMR experiments are attributed to water molecules and in-lattice OH - coordinated to silver, respectively. The lack of spinning sidebands around the 4.87 ppm peak indicates rapid reorientation on the NMR timescale, suggesting that the water molecules are adsorbed to the surface of the Ag 2 O crystals. Pulsed field gradient measurements gave similar diffusion coefficients (2 x 10 -7 cm 2 /s at 298K) for all three proton environments indicating chemical exchange between sites on the millisecond timescale. The activation energy for OH - diffusion measured by NMR (0.18 eV) was comparable to that obtained by conductivity measurements and density functional theory (DFT) electronic structure calculations. Furthermore, the calculated Pourbaix diagram of Ag 2 O is consistent with the slightly lower sample density observed in He pycnometry and thermogravimetric measurements.

25 ENERGY STORAGE↗
DOE OSTI2020

Molecular Origins of the Barriers to Proton Transport in Acidic Aqueous Solutions

The self-consistent iterative multistate empirical valence bond (SCI-MS-EVB) method is used to analyze the structure, thermodynamics, and dynamics of hydrochloric acid solutions. The reorientation timescales of irreversible proton transport are elucidated by simulating 0.43 M, 0.85 M, 1.68 M, and 3.26 M HCl solutions at 270 K, 285 K, 300 K, 315 K, and 330 K. The results indicate increased counter-ion pairing with increasing concentration, which manifests itself via a reduced hydronium oxygen–chloride (O*-Cl) structuring in the radial distribution functions. Increasing ionic concentration also reduces the diffusion of the hydrated excess protons, principally by reducing the contribution of the Grotthuss proton hopping (shuttling) mechanism to the overall diffusion process. In agreement with prior experimental findings, a decrease in the activation energy of reorientation timescales was also observed, which is explicitly explained using activated rate theory and an energy-entropy decomposition of the state-averaged radial distribution functions. Furthermore, these results provide atomistic verification of suggestions from recent two-dimensional infrared spectroscopy experiments that chloride anions (as opposed to hydrated excess protons) create entropic barriers to proton transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗