Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tidal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Tidal Disruption of Strengthless Rubble Piles: A Dimensional Analysis

A relatively simple prescription for estimating the number of debris clumps (n) that form after a catastrophic tidal disruption event is presented. Following the breakup event, it is assumed that the individual debris particles follow keplerian orbits about the planet until the debris' gravitational contraction timescale (t(sub c)) becomes shorter than its orbital spreading timescale (t(sub s)). When the two timescales become comparable, self-gravity breaks up the debris train into n = L/D clumps, which is the debris length/diameter ratio at that instant. The clumps subsequently orbit the planet independent of each other. The predicted number of clumps n is in good agreement with more sophisticated N-body treatments of tidal breakup for parabolic encounters, and the dependence of n upon the progenitor's density as well as its orbit is also mapped out for hyperbolic encounters. These findings may be used to further constrain both the orbits and densities of the tidally disrupted bodies that struck Callisto and Ganymede. A cursory analysis shows that the Gomul and Gipul crater chains on Callisto, which have the greatest number of craters among the known chains, were formed by projectiles having comet-like densities estimated at rho(sub o) < 1 gm/cc.

Hahn, Joseph M.↗
NASA NTRS2002

Tidal Models In A New Era of Satellite Gravimetry

The high precision gravity measurements to be made by recently launched (and recently approved) satellites place new demands on models of Earth, atmospheric, and oceanic tides. The latter is the most problematic. The ocean tides induce variations in the Earth's geoid by amounts that far exceed the new satellite sensitivities, and tidal models must be used to correct for this. Two methods are used here to determine the standard errors in current ocean tide models. At long wavelengths these errors exceed the sensitivity of the GRACE mission. Tidal errors will not prevent the new satellite missions from improving our knowledge of the geopotential by orders of magnitude, but the errors may well contaminate GRACE estimates of temporal variations in gravity. Solar tides are especially problematic because of their long alias periods. The satellite data may be used to improve tidal models once a sufficiently long time series is obtained. Improvements in the long-wavelength components of lunar tides are especially promising.

Ray, Richard D.↗
NASA NTRS2000

Significant Dissipation of Tidal Energy in the Deep Ocean Inferred from Satellite Altimeter Data

How and where the ocean tides dissipate their energy are longstanding questions that have consequences ranging from the history of the Moon to the mixing of the oceans. Historically, the principal sink of tidal energy has been thought to be bottom friction in shallow seas. There has long been suggestive however, that tidal dissipation also occurs in the open ocean through the scattering by ocean-bottom topography of surface tides into internal waves, but estimates of the magnitude of this possible sink have varied widely. Here we use satellite altimeter data from Topex/Poseidon to map empirically the tidal energy dissipation. We show that approximately 10(exp 12) watts-that is, 1 TW, representing 25-30% of the total dissipation-occurs in the deep ocean, generally near areas of rough topography. Of the estimated 2 TW of mixing energy required to maintain the large-scale thermohaline circulation of the ocean, one-half could therefore be provided by the tides, with the other half coming from action on the surface of the ocean.

Egbert, G. D.↗
NASA NTRS2003

Estimating the k2 Tidal Gravity Love Number of Mars

Analysis of the orbits of spacecraft can be used to infer global tidal parameters. For Mars, the Mars Global Surveyor (MGS) spacecraft has been used to estimate the second degree Love number, k2 from the tracking DSN tracking Doppler and range data by several authors. Unfortunately, neither of the spacecraft presently in orbit are ideally suited to tidal recovery because they are in sun-synchronous orbits that vary only slightly in local time; and, further, the sub-solar location only varies by about 25 degrees in latitude. Never-the less respectable estimates of the k2 tide have been made by several authors. We present an updated solution of the degree 2 zonal Love number, compare with previous dues, and analyze the sensitivity of the solution to orbital parameters, spacecraft maneuvers, and solution methodology. Estimating the k2 Tidal Gravity Love Number of Mars.

Smith, David E.↗
NASA NTRS2004

Jason 1 Investigation: Altimetric Studies of Ocean Tidal Dynamics

Two papers on tidal dissipation were completed and published. The first of these extended our earlier work, which focused on the dominant M2 constituent, to include 7 additional constituents. In addition to confirming a total deep water dissipation total very close to 1 TW, this study demonstrated significant differences in the distribution of dissipation between diurnal and semi-diurnal constituents. The second paper involved an extensive modeling study of tides in the present day and the last glacial maximum. In this study we showed that accuracy of tidal solutions for the present day Ocean were significantly improved by including a parameterization of internal tide drag over rough topography in the deep ocean. It was also demonstrated that a complete self-consistent treatment of Ocean self attraction and tidal loading was required for accurate solutions.

Egbert, Gary D.↗
NASA NTRS2010

The Roles of Tidal Evolution and Evaporative Mass Loss in the Origin of CoRoT-7 b

CoRoT-7 b is the first confirmed rocky exoplanet, but, with an orbital semimajor axis of 0.0172 au, its origins may be unlike any rocky planet in our Solar System. In this study, we consider the roles of tidal evolution and evaporative mass loss in CoRoT-7 b's history, which together have modified the planet's mass and orbit. If CoRoT-7 b has always been a rocky body, evaporation may have driven off almost half its original mass, but the mass loss may depend sensitively on the extent of tidal decay of its orbit. As tides caused CoRoT-7 b's orbit to decay, they brought the planet closer to its host star, thereby enhancing the mass loss rate. Such a large mass loss also suggests the possibility that CoRoT-7 b began as a gas giant planet and had its original atmosphere completely evaporated. In this case, we find that CoRoT-7 b's original mass probably did not exceed 200 Earth masses (about two-third of a Jupiter mass). Tides raised on the host star by the planet may have significantly reduced the orbital semimajor axis, perhaps causing the planet to migrate through mean-motion resonances with the other planet in the system, CoRoT-7 c. The coupling between tidal evolution and mass loss may be important not only for CoRoT-7 b but also for other close-in exoplanets, and future studies of mass loss and orbital evolution may provide insight into the origin and fate of close-in planets, both rocky and gaseous.

Jackson, Brian↗
NASA NTRS2011

Observing and Modeling Long-Period Tidal Variations in Polar Motion

By exchanging angular momentum with the solid Earth, ocean tides cause the Earth's rotation to change. While hydrodynamic tide models have been used to study the effect of ocean tides on polar motion, it is shown here that none of the published models can fully account for the observed variations. An empirical ocean tide model is therefore determined by fitting periodic terms at the tidal frequencies to polar motion excitation observations, from which atmospheric and non-tidal oceanic effects were removed. While the empirical ocean tide model does fully account for allof the observed tidal power, tests indicate that the model may not have completely converged. So better models of the effects of ocean tides on polar motion are still needed, both dynamical and empirical.

tides↗
NASA NTRS2012

Tidal Control of Jet Eruptions Observed by Cassini ISS

Observations by Cassini's Imaging Science Subsystem (ISS) of Enceladus' south polar region at high phase angles has revealed jets of material venting into space. Observations by Cassini's Composite Infrared Spectrometer (CIRS) have also shown that the south polar region is anomalously warm with hotspots associated with geological features called the Tiger Stripes. The Tiger Stripes are large rifts near the south pole of Enceladus, which are typically about 130 km in length, 2 km wide, with a trough 500 m deep, and are l1anked on each side by 100m tall ridges. Preliminary triangulation of jets as viewed at different times and with different viewing geometries in Cassini ISS images taken between 2005 and 2007 have constrained the locations of eight major eruptions of material and found all of them associated with the south polar fractures unofficially the 'Tiger Stripes', and found four of them coincident with the hotspots reported in 2006 by CIRS. While published ISS observations of jet activity suggest that individual eruption sites stay active on the timescale of years, any shorter temporal variability (on timescales of an orbital period, or 1.3 Earth days, for example) is more difficult to establish because of the spotty temporal coverage and the difficulty of visually isolating one jet from the forest of many seen in a typical image. Consequently, it is not known whether individual jets are continuously active, randomly active, or if they erupt on a predictable, periodic schedule. One mechanism that may control the timing of eruptions is diurnal tidal stress, which oscillates between compression/tension as well as right and left lateral shear at any given location throughout Enceladus' orbit and may allow the cracks to open and close regularly. We examine the stresses on the Tiger Stripe regions to see how well diurnal tidal stress caused by Enceladus' orbital eccentricity may possibly correlate with and thus control the observed eruptions. We then identify possible mechanisms by which tidal stress can provide access to the surface for volatile material and implications for observed jet activity.

Hurford, T. A.↗
NASA NTRS2012

Tidal Control of Jet Eruptions on Enceladus as Observed by Cassini ISS between 2005 and 2007

Observations of Enceladus have revealed active jets of material erupting from cracks on its south polar surface. It has previously been proposed that diurnal tidal stress, driven by Enceladus' orbital eccentricity, may actively produce surface movement along these cracks daily and thus may regulate when eruptions occur. Our analysis of the stress on jet source regions identified in Cassini ISS images reveals tidal stress as a plausible controlling mechanism of jet activity. However, the evidence available in the published and preliminary observations of jet activity between 2005 and 2007 may not be able to solidify the link between tidal stress and eruptions from fissures. Ongoing, far more comprehensive analyses based on recent, much higher resolution jetting observations have the potential to prove otherwise.

Hurford, T. A.↗
NASA NTRS2014

Ice-Shelf Flexure and Tidal Forcing of Bindschadler Ice Stream, West Antarctica

Viscoelastic models of ice-shelf flexure and ice-stream velocity perturbations are combined into a single efficient flowline model to study tidal forcing of grounded ice. The magnitude and timing of icestream response to tidally driven changes in hydrostatic pressure and/or basal drag are found to depend significantly on bed rheology, with only a perfectly plastic bed allowing instantaneous velocity response at the grounding line. The model can reasonably reproduce GPS observations near the grounding zone of Bindschadler Ice Stream (formerly Ice Stream D) on semidiurnal time scales; however, other forcings such as tidally driven ice-shelf slope transverse to the flowline and flexurally driven till deformation must also be considered if diurnal motion is to be matched

Ice-shelf↗
NASA NTRS2016

Tidal Disruption of Phobos as the Cause of Surface Fractures

Phobos, the innermost satellite of Mars, displays an extensive system of grooves that are mostly symmetric about its sub-Mars point. Phobos is steadily spiraling inward due to the tides it raises on Mars lagging behind Phobos' orbital position and will suffer tidal disruption before colliding with Mars in a few tens of millions of years. We calculate the surface stress field of the deorbiting satellite and show that the first signs of tidal disruption are already present on its surface. Most of Phobos' prominent grooves have an excellent correlation with computed stress orientations. The model requires a weak interior that has very low rigidity on the tidal evolution time scale, overlain by an approximately 10-100 m exterior shell that has elastic properties similar to lunar regolith as described by Horvath et al. (1980).

Hurford, T. A.↗
NASA NTRS2017

On Tidal Inference in the Diurnal Band

Standard methods of tidal inference should be revised to account for a known resonance that occurs mostly within the K(sub 1) tidal group in the diurnal band. The resonance arises from a free rotational mode of Earth caused by the fluid core. In a set of 110 bottom-pressure tide stations, the amplitude of the P(sub 1) tidal constituent is shown to be suppressed relative to K(sub 1), which is in good agreement with the resonance theory. Standard formulas for the K(sub 1) nodal modulation remain essentially unaffected. Two examples are given of applications of the refined inference methodology: one with monthly tide gauge data and one with satellite altimetry. For some altimeter-constrained tide models, an inferred P(sub 1) constituent is found to be more accurate than a directly determined one.

Ray, R. D.↗
NASA NTRS2018

Biosignature Anisotropy Modeled on Temperate Tidally Locked M-Dwarf Planets

A planet’s atmospheric constituents (e.g., O2, O3, H2Ov, CO2, CH4, and N2O) can provide clues to its surface habitability, and may offer biosignature targets for remote life detection efforts. The plethora of rocky exoplanets found by recent transit surveys (e.g., the Kepler mission) indicates that potentially habitable systems orbiting K- and M-dwarf stars may have very different orbital and atmospheric characteristics than Earth. To assess the physical distribution and observational prospects of various biosignatures and habitability indicators, it is important to understand how they may change under different astrophysical and geophysical configurations, and to simulate these changes with models that include feedbacks between different subsystems of a planet’s climate. Here we use a three-dimensional (3D) Chemistry–Climate model (CCM) to study the effects of changes in stellar spectral energy distribution (SED), stellar activity, and planetary rotation on Earth analogs and tidally locked planets. Our simulations show that, apart from shifts in stellar SEDs and UV radiation, changes in illumination geometry and rotation-induced circulation can influence the global distribution of atmospheric biosignatures. We find that the stratospheric day-to-nightside mixing ratio differences on tidally locked planets remain low (<20%) across the majority of the canonical biosignatures. Interestingly, however, secondary photosynthetic biosignatures (e.g., C2H6S) show much greater (∼67%) day-to-nightside differences, and point to regimes in which tidal locking could have observationally distinguishable effects on phase curve, transit, and secondary eclipse measurements. Overall, this work highlights the potential and promise for 3D CCMs to study the atmospheric properties and habitability of terrestrial worlds.

Chen, Howard↗
DOE OSTI2021

Cook Inlet Tidal Energy Resource Characterization Effort

Located in the southcentral region of Alaska, Cook Inlet contains one of the greatest tidal resources in the world. A pinch point in the channel increases the water velocity and provides an excellent site for a potential tidal farm. Access to affordable, clean power would provide a cascade of economic benefits to Alaskans, who face some of the highest energy costs and most extreme climates in the U.S. NREL researchers are collaborating with universities and private partners to gain a better understanding of the underwater environment to pave the way for development of an efficient, durable tidal farm. This summer, they will deploy a buoy in Cook Inlet to characterize the site.

50 EE - Wind and Water Power Program - Water (EE-4↗
DOE OSTI2025

$S^5$: Tidal Disruption in Crater 2 and Formation of Diffuse Dwarf Galaxies in the Local Group

We present results of a spectroscopic campaign around the diffuse dwarf galaxy Crater 2 (Cra2) and its tidal tails as part of the Southern Stellar Stream Spectroscopic Survey ($S^5$). Cra2 is a Milky Way dwarf spheroidal satellite with extremely cold kinematics, but a huge size similar to the Small Magellanic Cloud, which may be difficult to explain within collisionless cold dark matter. We identify 143 Cra2 members, of which 114 belong to the galaxy's main body and 29 are deemed part of its stellar stream. We confirm that Cra2 is dynamically cold (central velocity dispersion $2.51^{+0.33}_{-0.30}\,{\rm km\,s^{-1}}$) and also discover a $\approx$7$σ$ velocity gradient consistent with its tidal debris track. We separately estimate the stream velocity dispersion to be $5.74^{+0.98}_{-0.83}\,{\rm km\,s^{-1}}$. We develop a suite of $N$-body simulations with both cuspy and cored density profiles on a realistic Cra2 orbit to compare with $S^5$ observations. We find that the velocity dispersion ratio between Cra2 stream and galaxy ($2.30^{+0.41}_{-0.35}$) is difficult to reconcile with a cuspy halo with fiducial concentration and an initial mass predicted by standard stellar mass$-$halo mass relationships. Instead, either a cored halo with relatively small core radius or a low-concentration cuspy model can reproduce this ratio. Despite tidal mass loss, Cra2 is metal-poor ($\langle \rm[Fe/H]\rangle=-2.16\pm0.04$) compared to the stellar mass$-$metallicity relation for its luminosity. Other diffuse dwarf galaxies similar to Cra2 in the Local Group (Antlia 2 and Andromeda 19) also challenge galaxy formation models. Finally, we discuss possible formation scenarios for Cra2, including ram-pressure stripping of a gas-rich progenitor combined with tides.

Limberg, Guilherme [Chicago U., KICP; Chicago U.] ↗
DOE OSTI2020

Comparison of experimental and computational methods for discharge measurements from tidal wetlands

This short communication describes the use and comparison of three methods used to calculate the flow discharge from a tidal wetland stream. The techniques presented are a) bottom-mounted ADCP deployments, b) vessel-mounted ADCP transects, and c) a volume inundation spatial model that relies on a high-resolution LiDAR dataset and time-series of water surface elevation data. The relative agreement between these three methods is used to build confidence in the application of these techniques to the challenge of deducing flow discharge from tidal wetlands.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Post-Deployment Characterization of Glass Fiber-Reinforced Thermoset and Thermoplastic Composite Tidal Turbine Blades

In 2021, the National Renewable Energy Laboratory (NREL) supported Verdant Power with the most successful tidal energy deployment in U.S. history. Three of their Gen5d 5 m turbines were deployed as part of the Roosevelt Island Tidal Energy project. Initially, the three rotors initially deployed were manufactured from glass fiber-reinforced epoxy composites. Midway through the deployment, one rotor was replaced with one manufactured at NREL. The new rotor utilized a novel infusible thermoplastic resin system. Since the deployment, one epoxy rotor and one thermoplastic rotor were returned to NREL for continued materials and manufacturing research. The two rotors underwent full-scale structural testing before being sectioned and cut into specimens for a variety of manufacturing quality tests, thermomechanical characterization, and evaluation of material performance in marine environments to understand the key differences between the fiberglass-reinforced epoxy and Elium composites used for the respective rotors. Matrix burn-off tests showed that the Elium blades had a considerably higher fiber volume fraction compared to the epoxy blades (61% vs. 49%). Environmental aging of the specimens showed that the epoxy laminates absorbed more water over the conditioning period; however, it was determined that the Elium laminates had higher diffusion coefficients, so they initially absorbed water faster. Finally, one full epoxy blade and one full Elium blade were conditioned at ambient temperatures for up to 11 months, while periodic mass measurements were taken. The datasets were extrapolated to assume a full 20-year operational life span, and it was determined that the blades would not reach full saturation during that time span.

composite manufacturing↗
DOE OSTI2023

Tidal Turbine Benchmarking Project: Stage I - Steady Flow Blind Predictions: Preprint

This paper presents the first blind prediction stage of the Tidal Turbine Benchmarking Project being conducted and funded by the UK's EPSRC and Supergen ORE Hub. In this first stage, only steady flow conditions, at low and elevated turbulence (3.1%) levels, were considered. Prior to the blind prediction stage, a large laboratory scale experiment was conducted in which a highly instrumented 1.6m diameter tidal rotor was towed through a large towing tank in well-defined flow conditions with and without an upstream turbulence grid. Details of the test campaign and rotor design were released as part of this community blind prediction exercise. Participants were invited to use a range of engineering modelling approaches to simulate the performance and loads of the turbine. 26 submissions were received from 12 groups from across academia and industry using solution techniques ranging from blade resolved computational fluid dynamics through actuator line, boundary integral element methods, vortex methods to engineering Blade Element Momentum methods. The comparisons between experiments and blind predictions were extremely positive helping to provide validation and uncertainty estimates for the models, but also validating the experimental tests themselves. The exercise demonstrated that the experimental turbine data provides a robust data set against which researchers and design engineers can test their models and implementations to ensure robustness in their processes, helping to reduce uncertainty and provide increased confidence in engineering processes. Furthermore, the data set provides the basis by which modellers can evaluate and refine approaches.

benchmarking↗