Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Strain engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

AA2024/SiC metal matrix composites simultaneously improve ductility and cracking resistance during elevated temperature deformation

Here this study uses the stir-casting technique to combine a semi-solid AA2024 alloy directly with finely-sized β-SiC p embedded as a powder or with mechanically alloyed granules as a delivery agent. Liquid-state primary fabrication tends to form agglomerates of reinforcement particles, whereas rolling better distributes the composite constituents. Sub-micron reinforcements of low volume fractions do not significantly increase the hardness of the composite materials. Uniaxial tensile testing at elevated temperatures over a wide range of strain rates showed simultaneous increases in the ductility and crack resistance of AA2024 + SiC p granules embedded as a powder when compared to the non-reinforced control material at lower strain rates, with the same toughness as the control material. The maximum engineering strain of 252.7 ± 19.2% was observed in AA2024/SiCp at a strain rate of 10 -4 s -1 . This improvement in properties is attributed to grain refinement in the MMCs, leading to pinning events during the straining and ductility increases. The resultant impediments to grain growth and crack propagation allow the fine-sized reinforcements to control dynamic microstructural changes during fatigue. Cube {001}<100> is a dominant texture component in AA2024, whereas the Goss {011}<100> and S {123}<634> components mainly represent the texture of the discontinuously reinforced aluminum matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Magneto-induced tunability of thermo-spin current in deformed zigzag graphene nanoribbons

The aim of this report is to unfold how the thermo-electric spin-polarized current in a transverse-biased zigzag graphene nanoribbon changes in the presence of uniaxial deformations and uniform perpendicular magnetic field. Employing the two-parameter Hubbard model along with the non-equilibrium Green's function formalism, we found that both uniaxial strain and magnetic field can significantly modulate the bandgap, local distribution of edge states, and the critical transverse electric field needed to achieve the half-metallic phase in the ribbon. Our analysis shows a significant enhancement of the maximum attainable spin-polarized current as functions of both source temperature and contacts temperature difference, with increasing the magnetic field or applying any magnitude of compressive strain. Furthermore, it is shown that the magneto-resistance ratio of the device, can be drastically tuned via strain engineering, reaching values as high as 2 × 10{sup 4}% for compressive strains of 5% magnitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

The Insertion Green Monster (iGM) Method for Expression of Multiple Exogenous Genes in Yeast

Being a simple eukaryotic organism, Saccharomyces cerevisiae provides numerous advantages for expression and functional characterization of proteins from higher eukaryotes, including humans. However, studies of complex exogenous pathways using yeast as a host have been hampered by the lack of tools to engineer strains expressing a large number of genetic components. In addition to inserting multiple genes, it is often desirable to knock out or replace multiple endogenous genes that might interfere with the processes studied. Here, we describe the “insertion Green Monster” (iGM) set of expression vectors that enable precise insertion of many heterologous genes into the yeast genome in a rapid and reproducible manner and permit simultaneous replacement of selected yeast genes. As a proof of principle, we have used the iGM method to replace components of the yeast pathway for methionine sulfoxide reduction with genes encoding the human selenoprotein biosynthesis machinery and generated a single yeast strain carrying 11 exogenous components of the selenoprotein biosynthetic pathway in precisely engineered loci.

Saccharomyces cerevisiae↗
DOE OSTI2021

Redundancy in Aromatic O -Demethylation and Ring-Opening Reactions in Novosphingobium aromaticivorans and Their Impact in the Metabolism of Plant-Derived Phenolics

ABSTRACT Lignin is a plant heteropolymer composed of phenolic subunits. Because of its heterogeneity and recalcitrance, the development of efficient methods for its valorization still remains an open challenge. One approach to utilize lignin is its chemical deconstruction into mixtures of monomeric phenolic compounds, followed by biological funneling into a single product. Novosphingobium aromaticivorans DSM 12444 has been previously engineered to produce 2-pyrone-4,6-dicarboxylic acid (PDC) from depolymerized lignin by simultaneously metabolizing multiple aromatics through convergent routes involving the intermediates 3-methoxygallic acid (3-MGA) and protocatechuic acid (PCA). We investigated enzymes predicted to be responsible for O -demethylation and oxidative aromatic ring opening, two critical reactions involved in the metabolism of phenolic compounds by N. aromaticivorans . The results showed the involvement of DesA in O -demethylation of syringic and vanillic acids, LigM in O- demethylation of vanillic acid and 3-MGA, and a new O- demethylase, DmtS, in the conversion of 3-MGA into gallic acid (GA). In addition, we found that LigAB was the main aromatic ring-opening dioxygenase involved in 3-MGA, PCA, and GA metabolism and that a previously uncharacterized dioxygenase, LigAB2, had high activity with GA. Our results indicate a metabolic route not previously identified in N. aromaticivorans that involves O -demethylation of 3-MGA to GA. We predict that this pathway channels ∼15% of the carbon flow from syringic acid, with the rest following ring opening of 3-MGA. The new knowledge obtained in this study allowed for the creation of an improved engineered strain for the funneling of aromatic compounds that exhibits stoichiometric conversion of syringic acid into PDC. IMPORTANCE For lignocellulosic biorefineries to effectively contribute to reduction of fossil fuel use, they need to become efficient at producing chemicals from all major components of plant biomass. Making products from lignin will require engineering microorganisms to funnel multiple phenolic compounds to the chemicals of interest, and N. aromaticivorans is a promising chassis for this technology. The ability of N. aromaticivorans to efficiently and simultaneously degrade many phenolic compounds may be linked to having functionally redundant aromatic degradation pathways and enzymes with broad substrate specificity. A detailed knowledge of aromatic degradation pathways is thus essential to identify genetic engineering targets to maximize product yields. Furthermore, knowledge of enzyme substrate specificity is critical to redirect flow of carbon to desired pathways. This study described an uncharacterized pathway in N. aromaticivorans and the enzymes that participate in this pathway, allowing the engineering of an improved strain for production of PDC from lignin.

Biotechnology & Applied Microbiology↗
DOE OSTI2017

The importance of sourcing enzymes from non-conventional fungi for metabolic engineering and biomass breakdown

A wealth of fungal enzymes has been identified from nature, which continue to drive strain engineering and bioprocessing for a range of industries. However, while a number of clades have been investigated, the vast majority of the fungal kingdom remains unexplored for industrial applications. In this study, we discuss selected classes of fungal enzymes that are currently in biotechnological use, and explore more basal, non-conventional fungi and their underexploited biomass-degrading mechanisms as promising agents in the transition towards a bio-based society. Of special interest are anaerobic fungi like the Neocallimastigomycota, which were recently found to harbor the largest diversity of biomass-degrading enzymes among the fungal kingdom. Enzymes sourced from these basal fungi have been used to metabolically engineer substrate utilization in yeast, and may offer new paths to lignin breakdown and tunneled biocatalysis. We also contrast classic enzymology approaches with emerging ‘omics’-based tools to decipher function within novel fungal isolates and identify new promising enzymes. Recent developments in genome editing are expected to accelerate discovery and metabolic engineering within these systems, yet are still limited by a lack of high-resolution genomes, gene regulatory regions, and even appropriate culture conditions. Lastly, we present new opportunities to harness the biomass-degrading potential of undercharacterized fungi via heterologous expression and engineered microbial consortia.

09 BIOMASS FUELS↗
DOE OSTI2021

Accelerating strain phenotyping with desorption electrospray ionization-imaging mass spectrometry and untargeted analysis of intact microbial colonies

Significance Synthetic biology has entered an era in which reading and writing DNA sequences are no longer rate-limiting steps in microbial strain engineering. Indeed, analytical methods measuring the resulting metabolic outcomes of specific gene edits have lagged behind the ability to generate new recombinant strains. Herein, we report a mass spectrometry strategy to accelerate these analytical workflows by directly analyzing metabolites and molecules produced from engineered microorganisms in a multiplexed process. Using untargeted acquisitions and unsupervised analytics, we assess the molecular features that change across discrete strains including primary target species, secondary products, and species outside the engineered fatty acid biosynthesis pathway.

09 BIOMASS FUELS↗
DOE OSTI2021

Highly Efficient Uniaxial In-Plane Stretching of a 2D Material via Ion Insertion

On-chip dynamic strain engineering requires efficient micro-actuators that can generate large in-plane strains. Inorganic electrochemical actuators are unique in that they are driven by low voltages (≈1 V) and produce considerable strains (≈1%). However, actuation speed and efficiency are limited by mass transport of ions. Minimizing the number of ions required to actuate is thus key to enabling useful “straintronic” devices. Here, it is shown that the electrochemical intercalation of exceptionally few lithium ions into WTe 2 causes large anisotropic in-plane strain: 5% in one in-plane direction and 0.1% in the other. This efficient stretching of the 2D WTe 2 layers contrasts to intercalation-induced strains in related materials which are predominantly in the out-of-plane direction. The unusual actuation of Li x WTe 2 is linked to the formation of a newly discovered crystallographic phase, referred to as Td', with an exotic atomic arrangement. On-chip low-voltage (<0.2 V) control is demonstrated over the transition to the novel phase and its composition. Within the Td'-Li 0.5-δ WTe 2 phase, a uniaxial in-plane strain of 1.4% is achieved with a change of δ of only 0.075. This makes the in-plane chemical expansion coefficient of Td'-Li 0.5-δ WTe 2 far greater than of any other single-phase material, enabling fast and efficient planar electrochemical actuation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

High‐Temperature Single‐Photon Emission From Covalently Functionalized van der Waals Heterostructures

Two-dimensional (2D) transition metal dichalcogenides (TMDs) such as tungsten diselenide (WSe 2 ) are attractive nanomaterials for quantum information applications due to single-photon emission (SPE) from intrinsic atomic defects. Defect and strain engineering techniques have been developed to produce high purity, deterministically placed SPE in WSe 2 . However, a major challenge in the application of these techniques is the low temperature required to observe defect-bound TMD exciton emission, typically limiting SPE to T < 30 K. SPE at higher temperatures either loses purity or requires integration into complex devices such as optical cavities. Here, 2D heterostructure engineering and molecular functionalization are combined to achieve high purity (>90%) SPE in strained WSe 2 persisting to over T = 90 K. Covalent diazonium functionalization of graphite in layered WSe 2 /graphite heterostructures maintains high purity up to T = 90 K and single-photon source integrity up to T = 115 K. This method preserves the best qualities of SPE from WSe 2 while increasing working temperature to more than three times the typical range. This work demonstrates the versatility of surface functionalization and heterostructure design to synergistically improve the properties of quantum emission and offers new insights into the phenomenon of SPE from 2D materials.

2D materials↗
DOE OSTI2025

Hybrid biological-chemical strategy for converting polyethylene into a recyclable plastic monomer using engineered Corynebacterium glutamicum

Converting polyethylene (PE) into valuable materials, particularly ones that are better for the environment than the incumbent plastics, not only helps mitigate environmental issues caused by plastic waste but also alleviates the long-standing problem of microbial fermentation competing with food supplies. However, the inherent robustness of PE due to its strong carbon-carbon bonds and high molecular weight necessitates harsh decomposition conditions, resulting in diverse decomposition outcomes that present significant challenges for downstream applications, especially for bioconversion. In this study, we demonstrate a hybrid biological-chemical conversion process for PE, converting its decomposition products, namely short-chain diacids, into a monomer, β-keto-δ-lactone (BKDL), for highly recyclable polydiketoenimine plastics using engineered Corynebacterium glutamicum. Since BKDL synthesis requires a substantial supply of malonyl-CoA, we employed an alternative biosynthesis pathway that leverages C. glutamicum's natural proficiency in amino acid production. We optimized this pathway in vivo by minimizing carbon loss to CO2 and byproducts, improving the transporter system, and maximizing co-factor regeneration. Furthermore, we co-optimized the PE deconstruction process to produce predominantly C4 to C6 diacids and integrated three catabolic pathways into the engineered strain to enhance diacid utilization, maximizing the carbon conversion from PE. Finally, an engineered polyketide synthase was introduced into C. glutamicum to enable BKDL synthesis. This work demonstrates the potential of a chemo-biological hybrid strategy for recycling plastic waste, highlighting its promise in addressing environmental challenges and promoting sustainable materials.

Zhan, Chunjun↗
DOE OSTI2019

Nature of the structural symmetries associated with hybrid improper ferroelectricity in C a 3 X 2 O 7 ( X = Mn and Ti )

In hybrid improper ferroelectric systems, polarization arises from the onset of successive nonpolar lattice modes. Here, measurements and modeling were performed to determine the spatial symmetries of the phases involved in the transitions to these modes. Structural and optical measurements reveal that the tilt and rotation distortions of the MnO 6 or TiO 6 polyhedra relative to the high symmetry phases driving ferroelectricity in the hybrid improper Ca 3 X 2 O 7 system (X = Mn and Ti) condense at different temperatures. The tilt angle vanishes abruptly at T T ~ 400 K for Ca 3 Mn 2 O 7 (and continuously for X = Ti ) and the rotation mode amplitude is suppressed at much higher temperatures T R ~ 1060 K. Moreover, Raman measurements in Ca 3 Mn 2 O 7 under isotropic pressure reveal that the polyhedral tilts can be suppressed by very low pressures (between 1.4 and 2.3 GPa) indicating their softness. These results suggest that the Ca 3 Mn 2 O 7 system provides a platform for strain engineering of ferroelectric properties in film-based systems with substrate-induced strain.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Error Analysis on Numerical Integration Algorithms in a Hypoelasticity Framework

This report determines local truncation errors for common stress integration algorithms used in explicit finite element codes with hypoelastic material models. The hypoelastic integration algorithms in question utilize an operator splitting procedure in a rotation neutralized configuration, where the stress response is determined from de- coupling the total deformation into rotational and strain dependent components. This document analyzes the error in evolving the stress given a one-step time increment Δt and compares the errors associated with both the rotational and strain components of the operator splitting method. A slight modification to a traditional algorithm is proposed and studied, where the rate of deformation is appropriately rotated from the midstep configuration at t n+1/2 to the end step configuration at t n+1 before the constitutive evaluation. The proposed modification either completely eliminates the error associated with the rotation rate or is of the same order of magnitude as the original algorithm for the three test cases considered in this report. These cases consist of an unaxial stretch with a constant true strain rate with a rigid body rotation, an uniaxial stretch with a constant engineering strain rate with a rigid body rotation, and a simple shear deformation. All three cases are compared to a closed form solution, and in almost every test case the alternative algorithm yields the most accurate one-step local truncation error.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Strain enhances the activity of molecular electrocatalysts via carbon nanotube supports

Abstract Support-induced strain engineering is useful for modulating the properties of two-dimensional materials. However, controlling strain of planar molecules is technically challenging due to their sub-2 nm lateral size. Additionally, the effect of strain on molecular properties remains poorly understood. Here we show that carbon nanotubes (CNTs) are ideal substrates for inducing optimum properties through molecular curvature. In a tandem-flow electrolyser with monodispersed cobalt phthalocyanine (CoPc) on single-walled CNTs (CoPc/SWCNTs) for CO 2 reduction, we achieve a methanol partial current density of >90 mA cm −2 with >60% selectivity, surpassing wide multiwalled CNTs at 16.6%. We report vibronic and X-ray spectroscopies to unravel the distinct local geometries and electronic structures induced by the strong molecule–support interactions. Grand canonical density functional theory confirms that curved CoPc/SWCNTs improve *CO binding to enable subsequent reduction, whereas wide multiwalled CNTs favour CO desorption. Our results show the important role of SWCNTs beyond catalyst dispersion and electron conduction.

Chemistry↗
DOE OSTI2014

Lattice strain effects on the optical properties of MoS 2 nanosheets

‘‘Strain engineering’’ in functional materials has been widely explored to tailor the physical properties of electronic materials and improve their electrical and/or optical properties. Here, we exploit both in plane and out of plane uniaxial tensile strains in MoS 2 to modulate its band gap and engineer its optical properties. We utilize X-ray diffraction and cross-sectional transmission electron microscopy to quantify the strains in the as-synthesized MoS 2 nanosheets and apply measured shifts of Raman-active modes to confirm lattice strain modification of both the out-of-plane and in-plane phonon vibrations of the MoS 2 nanosheets. The induced band gap evolution due to in-plane and out-of-plane tensile stresses is validated by photoluminescence (PL) measurements, promising a potential route for unprecedented manipulation of the physical, electrical and optical properties of MoS 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Direct strain correlations at the single-atom level in three-dimensional core-shell interface structures

Abstract Nanomaterials with core-shell architectures are prominent examples of strain-engineered materials. The lattice mismatch between the core and shell materials can cause strong interface strain, which affects the surface structures. Therefore, surface functional properties such as catalytic activities can be designed by fine-tuning the misfit strain at the interface. To precisely control the core-shell effect, it is essential to understand how the surface and interface strains are related at the atomic scale. Here, we elucidate the surface-interface strain relations by determining the full 3D atomic structure of Pd@Pt core-shell nanoparticles at the single-atom level via atomic electron tomography. Full 3D displacement fields and strain profiles of core-shell nanoparticles were obtained, which revealed a direct correlation between the surface and interface strain. The strain distributions show a strong shape-dependent anisotropy, whose nature was further corroborated by molecular statics simulations. From the observed surface strains, the surface oxygen reduction reaction activities were predicted. These findings give a deep understanding of structure-property relationships in strain-engineerable core-shell systems, which can lead to direct control over the resulting catalytic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Phase field simulation of martensitic transformation in pre-strained nanocomposite shape memory alloys

We show in this paper how strain engineering alters the fundamental characteristic of a martensitic transformation (MT) and gives it a new set of properties including large quasi-linear elastic strain response with nearly vanishing hysteresis and low elastic modulus. The work is motivated and inspired by a recent experimental study on elastic and inelastic (transformation) strain matching in a pre-strained nano-composite with Nb nanowires embedded in a NiTi shape memory alloy matrix. In particular, we demonstrate by computer simulation that dislocations at Nb/NiTi interfaces produced by the pre-straining are responsible for the unprecedented properties. Microstructural evolution captured in the simulations reveals that local stress fields associated with the dislocations regulate the nucleation and growth of martensite, turning the otherwise sharp, strong first-order transition into a continuous, high-order like transition. The simulations predict that the stress-strain hysteresis and modulus of the composite decrease with increasing amount of pre-strain, which agrees well with the experimental measurement. This study suggests a design strategy by introducing non-uniform stress fields for enhanced properties of shape memory alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Systematic investigation on topological properties of layered GaS and GaSe under strain

The topological properties of layered β-GaS and ε-GaSe under strain are systematically investigated by ab initio calculations with the electronic exchange-correlation interactions treated beyond the generalized gradient approximation (GGA). Based on the GW method and the Tran-Blaha modified Becke-Johnson potential approach, we find that while ε-GaSe can be strain-engineered to become a topological insulator, β-GaS remains a trivial one even under strong strain, which is different from the prediction based on GGA. The reliability of the fixed volume assumption rooted in nearly all the previous calculations is discussed. By comparing to strain calculations with optimized inter-layer distance, we find that the fixed volume assumption is qualitatively valid for β-GaS and ε-GaSe, but there are quantitative differences between the results from the fixed volume treatment and those from more realistic treatments. This work indicates that it is risky to use theoretical approaches like GGA that suffer from the band gap problem to address physical properties, including, in particular, the topological nature of band structures, for which the band gap plays a crucial role. In the latter case, careful calibration against more reliable methods like the GW approach is strongly recommended.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Topological Defect Mediated Helical Phase Reorientation by Uniaxial Stress

Strain engineering enables precise, energy-efficient control of nanoscale magnetism. However, unlike well-studied strain-dislocation interactions in mechanical deformation, the spatial evolution of strain-induced spin rearrangement remains poorly understood. Using Lorentz transmission electron microscopy, we manipulate and observe helical domain reorientation under quantitatively applied uniaxial tensile stress. Our findings reveal striking similarity to plastic deformation in metals, where the critical stress for propagation vector ( Q ) reorientation depends on its angle with the stress direction. Magnetic defects mediate reorientation via “break-and-reconnect” or “dislocation gliding–annihilation” processes. Simulations confirm that strain-induced anisotropic Dzyaloshinskii-Moriya interaction may play a key role. These insights advance strain-driven magnetism and offer a promising route for energy-efficient magnetic nanophase control in next-generation information technology. Published by the American Physical Society 2025

36 MATERIALS SCIENCE↗
DOE OSTI2018

Poisson's Ratio of a Hyperelastic Foam Under Quasi-static and Dynamic Loading

Poisson's ratio is a material constant representing compressibility of material volume. However, when soft, hyperelastic materials such as silicone foam are subjected to large deformation into densification, the Poisson's ratio may rather significantly change, which warrants careful consideration in modeling and simulation of impact/shock mitigation scenarios where foams are used as isolators. The evolution of Poisson's ratio of silicone foam materials has not yet been characterized, particularly under dynamic loading. In this study, radial and axial measurements of specimen strain are conducted simultaneously during quasi-static and dynamic compression tests to determine the Poisson's ratio of silicone foam. The Poisson's ratio of silicone foam exhibited a transition from compressible to nearly incompressible at a threshold strain that coincided with the onset of densification in the material. Poisson's ratio as a function of engineering strain was different at quasi-static and dynamic rates. Here, the Poisson's ratio behavior is presented and can be used to improve constitutive modeling of silicone foams subjected to a broad range of mechanical loading.

36 MATERIALS SCIENCE↗