Space geodesy altimetry study
Tradeoff analysis on radar and laser space altimeter systems for sea surface geodesy
Kolker, M.↗
SEARCH · Engineering Papers
Results for “Space lasers”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Requirements Study for System Implementation of an Atmospheric Laser Propagation Experiment Program, Volume II
Program planning, ground support and airborne equipment for laser space communication system
LASER↗
Toward 10-Milliarcsecond Infrared Astrometry
Infrared astometry at the 10-milliarcsecond (mas) level is applicable to experiments in stellar evolution astronomy, solar system dynamics, relativistic gravitation, and deep space laser tracking. We are pursuing astrometry with the U.C. Berkeley Infrared Spatial Interferometer (ISI) on Mt. Wilson to demonstrate a 10-mas capability for tracking stellar and solar system objects. Astrometric data from the ISI, taken and analyzed over the last 5 years, have shown that instrumental and atmospheric effects limit current demonstrations.
infrared↗
Emulating an Optical Planetary Access Link with an Aircraft
Video imagery was streamed from the ground to an aircraft using a free-space laser communication link. The link operated at 270 Mb/s over slant ranges of 5-9 km in day and night time background conditions. The experiment was designed to demonstrate autonomous link acquisition and served as a first proof-of-concept for a planetary access link between a surface asset and an orbiter at Mars. System parameters monitored during the link demonstration including acquisition and tracking and communication performance are discussed.
Ground-to-Aircraft↗
Deep-space Optical Communications Pointing Control Design
This paper provides an overview of pointing control design for NASA’s Deep Space Optical Communications (DSOC) system. DSOC is NASA’s first deep-space laser communications system and includes both a ground system and a space terminal. This paper focus on the pointing control system design and related issues for the Flight Laser Transceiver (FLT), including its key subsystems and components that support the space terminal pointing and control, its operational concept and sequence design, and its control systems design and related analyses. The paper also provides an overview of the achievable system pointing performance that meets the DSOC pointing control design requirements.
Zhu, David↗
High power laser diodes for the NASA direct detection laser transceiver experiment
High-power semiconductor laser diodes selected for use in the NASA space laser communications experiments are discussed. The diode selection rationale is reviewed, and the laser structure is shown. The theory and design of the third mirror lasers used in the experiments are addressed.
Seery, Bernard D.↗
Phased arrays of lasers for power transmission
The phased array is a group of regularly spaced lasers with parallel optical axes. Each laser of the group emits light of the same wavelength and the same phase. Mathematical models of laser transmission systems with regular arrays are presented, taking into account rectangular apertures. It is found that an array of free running lasers has the same normalized expectation value as the single laser, with the actual power a factor of N greater.
Vetter, A. A.↗
Laser power transmission for space power and propulsion
An early status report is presented for a review being made of the state of development of major components and subsystems required for ground-to-space, space-to-space, or space-to-ground laser power transmission for electric or thermal power or propulsion. System characteristics are being evaluated from an applications viewpoint, and major problem areas are being identified. The object is to identify a rewarding first application of lasers for space power and propulsion. An evolution of laser power transmission capabilities over the next 20 years is projected. Supporting technology requirements are to be identified, priorities set, and continued developments coordinated with other government agencies.
Brantley, L. W.↗
Reduction of ETS-VI Laser Communication Equipment Optical-Downlink Telemetry Collected During GOLD
Free-space laser communications experiments were conducted between the laser communication equipment (LCE) on board the Japanese Engineering Test Satellite VI (ETS-VI) and the ground station located at the Table Mountain Facility (TMF) during late 1995 and early 1996. This article describes the on-line data reduction process used to decode LCE telemetry (called E2) downlinked on the optical carrier during the Ground/Orbiter Lasercomm Demonstration (GOLD) experiments. The LCE has the capability of transmitting real-time sensor and status information at 128 kbps by modulating the onboard diode laser. The optical downlink was detected on the ground, bit synchronized, and the resulting data stream stored on a data recorder. The recorded data were subsequently decoded by on-line data processing that included cross-correlation of the known telemetry data format and the downlink data stream. Signals obtained from the processing can be useful not only in evaluating the characteristics of the LCE but also in understanding uplink and downlink signal quality.
Toyoshima, M.↗
Hollow Retroreflectors for Lunar Laser Ranging at Goddard Space Flight Center
Laser ranging to the retroreflector arrays placed on the lunar surface by the Apollo astronauts and the Soviet Luna missions have dramatically increased our understanding of gravitational physics along with Earth and Moon geophysics, geodesy, and dynamics. Although the precision of the range measurements has historically been limited by the ground station capabilities, advances in the APOLLO instrument at the Apache Point facility in New Mexico is beginning to be limited by errors associated with the lunar arrays. At Goddard Space Flight Center, we have developed a facility where we can design, build, and test next-generation hollow retroreflectors for Lunar Laser Ranging. Here we will describe this facility as well as report on the bonding techniques used to assemble the retroreflectors. Results from investigations into different high reflectivity mirror coatings, as well as dust mitigation coatings will also be presented.
Preston, Alix M.↗
Space-based laser-driven MHD generator: Feasibility study
The feasibility of a laser-driven MHD generator, as a candidate receiver for a space-based laser power transmission system, was investigated. On the basis of reasonable parameters obtained in the literature, a model of the laser-driven MHD generator was developed with the assumptions of a steady, turbulent, two-dimensional flow. These assumptions were based on the continuous and steady generation of plasmas by the exposure of the continuous wave laser beam thus inducing a steady back pressure that enables the medium to flow steadily. The model considered here took the turbulent nature of plasmas into account in the two-dimensional geometry of the generator. For these conditions with the plasma parameters defining the thermal conductivity, viscosity, electrical conductivity for the plasma flow, a generator efficiency of 53.3% was calculated. If turbulent effects and nonequilibrium ionization are taken into account, the efficiency is 43.2%. The study shows that the laser-driven MHD system has potential as a laser power receiver for space applications because of its high energy conversion efficiency, high energy density and relatively simple mechanism as compared to other energy conversion cycles.
Choi, S. H.↗
High current, high bandwidth laser diode current driver
A laser diode current driver has been developed for free space laser communications. The driver provides 300 mA peak modulation current and exhibits an optical risetime of less than 400 ps. The current and optical pulses are well behaved and show minimal ringing. The driver is well suited for QPPM modulation at data rates up to 440 Mbit/s. Much previous work has championed current steering circuits; in contrast, the present driver is a single-ended on/off switch. This results in twice the power efficiency as a current steering driver. The driver electrical efficiency for QPPM data is 34 percent. The high speed switch is realized with a Ku-band GaAsFET transistor, with a suitable pre-drive circuit, on a hybrid microcircuit adjacent to the laser diode.
Copeland, David J.↗
Wavelength Selection Criteria for Laser Communications
A rationale is provided for selecting wavelengths particularly suited for free space laser communications systems. Comparisons of wavelengths are based on propagation (especially through the atmosphere), optical background noise, and the needed technologies.
lasers↗
Laser Communication Component Technologies: Database; Status and Trends
A database of component and subsystem technologies for free-space laser communications has been compiled. This document discusses technology assessment for free-space lasercomm components, and contains a collection of characteristics of commercially available and one-of-a-kind components that were made for laser communication and other relevant applications. the document also includes quantitative data on laser communication systems that were constructed in the past, along with plots of development trends for specific component technologies as a function of time.
Laser↗
Large-Scale Hollow Retroreflectors for Lunar Laser Ranging at Goddard Space Flight Center
Laser ranging to the retroreflector arrays placed on the lunar surface by the Apollo astronauts and the Soviet Luna missions have dramatically increased our understanding of gravitational physics along with Earth and Moon geophysics, geodesy, and dynamics. Although the precision of the range measurements has historically been limited by the ground station capabilities, advances in the APOLLO instrument at the Apache Point facility in New Mexico is beginning to be limited by errors associated with the lunar arrays. We report here on efforts at Goddard Space Flight Center to develop the next generation of lunar retroreflectors. We will describe a new facility that is being used to design, assemble, and test large-scale hollow retroreflectors. We will also describe results from investigations into various bonding techniques used to assemble the open comer cubes and mirror coatings that have dust mitigation properties.
Preston, Alix↗
A cesium plasma TELEC device for conversion of laser radiation to electric power
Tests of the thermoelectronic laser energy converter (TELEC) concept are reported. This device has been devised as a means to convert high-average-power laser radiation into electrical energy, a crucial element in any space laser power transmission scheme using the available high-power/efficiency infrared lasers. Theoretical calculations, based upon inverse bremsstrahlung absorption in a cesium plasma, indicate internal conversion efficiency up to 50% with an overall system efficiency of 42%. The experiments reported were made with a test cell designed to confirm the theoretical model rather than demonstrate efficiency; 10.6-micron laser-beam absorption was limited to about 0.001 of the incident beam by the short absorption region. Nevertheless, confirmatory results were obtained, and the conversion of absorbed radiation to electric power is estimated to be near 10%.
Britt, E. J.↗
Video sensor with range measurement capability
A video sensor device is provided which incorporates a rangefinder function. The device includes a single video camera and a fixed laser spaced a predetermined distance from the camera for, when activated, producing a laser beam. A diffractive optic element divides the beam so that multiple light spots are produced on a target object. A processor calculates the range to the object based on the known spacing and angles determined from the light spots on the video images produced by the camera.
Briscoe, Jeri M.↗
Space Operation of the MOLA Laser
Interest in lasers for space applications such as active remote sensing in Earth orbit, planetary science, and inter-satellite laser communications is growing. These instruments typically use diode-pumped solid state lasers for the laser transmitter. The mission specifications and constraints of space qualification, place strict requirements on the design and operation of the laser. Although a laser can be built in the laboratory to meet performance specifications relatively routinely, tile mission constraints demand unique options and compromises in the materials used, and design to ensure the success of the mission. Presently, the best laser architecture for a light weight, rugged, high peak power and efficient transmitter is a diode laser pumped ND:YAG laser. Diode lasers can often obviate the need for water cooling, reduce the size and weight of the laser, increase the electrical to optical efficiency, system reliability, and lifetime. This paper describes the in-space operation and performance of the Mars Orbiter Laser Altimeter (MOLA) laser transmitter, representing the current state-of-the-art in space-based solid- state lasers.
Afzal, Robert S.↗