Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solid State Lighting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Accelerated Stress Testing Results on Single-Channel and Multichannel Drivers (Final Report)

Drivers used to operate light-emitting diode (LED) loads form an integral part of the solid-state lighting (SSL) system. While understanding of LED failure modes such as luminous flux depreciation and chromaticity shifts has increased greatly over the past five years, there is still much uncertainty about general failure modes in SSL drivers due to the almost infinite variety of driver typologies. This report, which is the third in a series of three reports on driver robustness, summarizes overall findings from up to 7,500 hours of accelerated stress testing (AST) on two-stage SSL drivers that could be used to operate troffers and similar fixtures. The earlier reports in this series provided initial AST results for both single-channel and multichannel drivers and an interim update on the performance of multichannel drivers in AST.

42 ENGINEERING↗
DOE OSTI2019

Fighting Flicker

Thanks in part to the rapid emergence of LED lighting, the phenomenon of flicker has been getting increased attention. All conventional light sources modulate luminous flux and intensity to some degree, usually as a consequence of drawing power from AC mains sources. But whereas conventional light sources have somewhat delayed responses to changes in electrical current – which serves to “cushion” them to some degree against flickering – the LED and its driver respond instantly to such changes, which can result in stark fluctuations in light output. And while these fluctuations may not be noticeable to everyone, they can still result in health and task performance problems. Understanding and countering flicker is essential to the success of high-efficiency lighting technology. That’s why the U.S. Department of Energy (DOE) Solid-State Lighting Program conducts flicker research and is supporting a number of industry committees (CIE 1-83: Visual Aspects of Time-Modulated Lighting Systems; CIE 2-89: Measurement of Temporal Light Modulation of Light Sources and Lighting Systems; and the IES Testing Procedures Committee) that are developing flicker standards for measurement, acceptability, and metrics. A wide variety of technical resources on flicker can be found at https://www.energy.gov/eere/ssl/flicker.

lighting, flicker, flicker meters, Flicker metrics↗
DOE OSTI2022

Correlating Broadband Photoluminescence with Structural Dynamics in Layered Hybrid Halide Perovskites

The emission of white light from a single material is atypical and is of interest for solid-state lighting applications. Broadband light emission has been observed in some layered perovskite derivatives, A 2 PbBr 4 (A = R-NH 3 + ), and correlates with static structural distortions corresponding to out-of-plane tilting of the lead bromide octahedra. While materials with different organic cations can yield distinct out-of-plane tilts, the underlying origin of the octahedral tilting remains poorly understood. Using high energy resolution (e.g., quasi-elastic) neutron scattering, this contribution details the rotational dynamics of the organic cations in A 2 PbBr 4 materials where A = n-butylammonium (nBA), 1,8-diaminooctammonium (ODA), and 4-aminobutyric acid (GABA). The organic cation dynamics differentiate (nBA) 2 PbBr 4 from (ODA)PbBr 4 or (GABA) 2 PbBr 4 in that the larger spatial extent of dynamics of nBA yields a larger effective cation radius. The larger effective volume of the nBA cation in (nBA) 2 PbBr 4 yields a closer to ideal A-site geometry, preventing the out-of-plane tilt and broadband luminescence. In all three compounds, we observe hydrogen dynamics attributed to rotation of the ammonium headgroup and at a time scale faster than the white light photoluminescence studied by time-correlated single photon counting spectroscopy. This supports a previous assignment of the broadband emission as resulting from a single ensemble, such that the emissive excited state experiences many local structures faster than the emissive decay. Furthermore, the findings presented here highlight the role of the organic cation and its dynamics in hybrid organic–inorganic perovskites and white light emission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Exterior LED Lighting Projects at Princeton University

For this report, PNNL / the U.S. Department of Energy (DOE) studied a series of past exterior lighting projects at Princeton, in order to document Princeton’s experiences with solid-state lighting (SSL) and the lessons learned along the way, and to show how their approach to SSL projects evolved as their own learning expanded and as the products available improved in performance and sophistication.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2013

Making More Light with Less Energy

Representing the Center for Energy Efficient Materials (CEEM), this document is one of the entries in the Ten Hundred and One Word Challenge. As part of the challenge, the 46 Energy Frontier Research Centers were invited to represent their science in images, cartoons, photos, words and original paintings, but any descriptions or words could only use the 1000 most commonly used words in the English language, with the addition of one word important to each of the EFRCs and the mission of DOE: energy. The mission of the CEEM is to discover and develop materials that control the interactions among light, electricity, and heat at the nanoscale for improved solar energy conversion, solid-state lighting, and conversion of heat into electricity.

14 SOLAR ENERGY↗
DOE OSTI2021

High-Luminance LED Platform for Improved Efficacy in Directional Applications (Final Technical Report)

In this project, Lumileds developed a platform of high-luminance LEDs and LED light engines to increase efficacy and reduce energy consumption of directional lighting applications. The platform was developed through innovations in three key areas: (1) epi and device architectures optimized for high drive current density, breaking through the tradeoff in efficacy (lm/W) vs. emittance (lm/mm 2 ) exhibited by state-of-the-art products; (2) a compact chip-scale package allowing high packing density and thus high overall luminance in multi-emitter arrays; and (3) phosphor technology to enable correlated color temperature (CCT) tuning in multi-emitter arrays with optimized LED utilization, efficacy, color uniformity and color quality. Directional indoor and outdoor lighting applications make up a major portion of the total lighting energy consumption in the U.S, accounting for >40% of the energy savings potential of solid-state lighting. Success of this project helps accelerate the realization of these energy savings both through higher system efficacy and adoption due to new functionality, and thus contributes significantly to realizing the DOE Lighting program goals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2016

Phosphorescent Pt(II) and Pd(II) Complexes for Efficient, High-Color-Quality, and Stable OLEDs

Phosphorescent organic light-emitting diodes (OLEDs) are leading candidates for next-generation displays and solid-state lighting technologies. Much of the academic and commercial pursuits in phosphorescent OLEDs have been dominated by Ir(III) complexes. Over the past decade recent developments have enabled square planar Pt(II) and Pd(II) complexes to meet or exceed the performance of Ir complexes in many aspects. In particular, the development of N-heterocyclic carbene-based emitters and tetradentate cyclometalated Pt and Pd complexes have significantly improved the emission efficiency and reduced their radiative lifetimes making them competitive with the best reported Ir complexes. Furthermore, their unique and diverse molecular design possibilities have enabled exciting photophysical attributes including narrower emission spectra, excimer -based white emission, and thermally activated delayed fluorescence. These developments have enabled the fabrication of efficient and “pure” blue OLEDs, single-doped white devices with EQEs of over 25% and high CRI, and device operational lifetimes which show early promise that square planar metal complexes can be stable enough for commercialization. These accomplishments have brought Pt complexes to the forefront of academic research. The molecular design strategies, photophysical characteristics, and device performance resulting from the major advancements in emissive Pt and Pd square planar complexes are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Science-based design of stable quantum dots for energy-efficient lighting

II-VI quantum dots, such as CdSe and CdTe, are attractive as downconversion materials for solid-state lighting, because of their narrow linewidth, tunable emission. However, for these materials to have acceptable quantum yields (QYs) requires that they be coated with a II-VI shell material whose valence band offset serves to confine the hole to the core. Confinement prevents the hole from accessing surface traps that lead to nonradiative decay of the exciton. Examples of such hole-confined core/shell QDs include CdTe/CdSe and CdSe/CdS. Unfortunately, the shell can also cause problems due to lattice mismatch, which ranges from 4-6% for systems of interest. This lattice mismatch can create significant interface energies at the heterojunction and places the core under radial compression and the shell under tangential tension. At elevated temperatures (~240°C) interfacial diffusion can relax these stresses, as can surface reconstruction, which can expose the core, creating hole traps. But such high temperatures favor the hexagonal Wurtzite structure, which has lower QY than the cubic zinc blende structure, which can be synthesized at lower temperatures, ~140°C. In the absence of alloying the core/shell structure can become metastable, or even unstable, if the shell is too thick. This can cause result in an irregular shell or even island growth. But if the shell is too thin thermallyactivated transport of the hole to surface traps can occur. In our LDRD we have developed a fundamental atomistic modeling capability, based on Stillinger-Weber and Bond-Order potentials we developed for the entire II-VI class. These pseudo-potentials have enabled us to conduct large-scale atomistic simulations that have led to the computation of phase diagrams of II-VI QDs. These phase diagrams demonstrate that at elevated temperatures the zinc blende phase of CdTe with CdSe grown on it epitaxially becomes thermodynamically unstable due to alloying. This is accompanied by a loss of hole confinement and a severe drop in the QY and emission lifetime, which is confirmed experimentally for the zinc blende core/shell QDs prepared at low temperatures. These QDs have QYs as high as 95%, which makes them very attractive for lighting. Finally, to address strain relaxation in these materials we developed a model for misfit dislocation formation that we have validated through atomistic simulations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2018

Stable Light-Emitting Diodes Using Phase-Pure Ruddlesden-Popper Layered Perovskites

State-of-the-art light-emitting diodes (LEDs) are made from high-purity alloys of III–V semiconductors, but high fabrication cost has limited their widespread use for large area solid-state lighting. Here in this paper, efficient and stable LEDs processed from solution with tunable color enabled by using phase-pure 2D Ruddlesden–Popper (RP) halide perovskites with a formula (CH 3 (CH 2 ) 3 NH 3 ) 2 (CH 3 NH 3 ) n-1 Pb n I 3n+1 are reported. By using vertically oriented thin films that facilitate efficient charge injection and transport, efficient electroluminescence with a radiance of 35 W Sr -1 cm -2 at 744 nm with an ultralow turn-on voltage of 1 V is obtained. Finally, operational stability tests suggest that phase purity is strongly correlated to stability. Finally, phase-pure 2D perovskites exhibit >14 h of stable operation at peak operating conditions with no droop at current densities of several Amperes cm -2 in comparison to mixtures of 2D/3D or 3D perovskites, which degrade within minutes.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Light Extraction System for OLED (LESO)

The DOE Office of Energy Efficiency and Renewable Energy is funding development of Solid-State Lighting (SSL) to replace incandescent and fluorescent technologies. A more aggressive innovation schedule could achieve site electricity consumption reductions from current projections of 40% to 60% by the year 2030 when compared to the no-LED scenario in the United States. These increased reductions would total an increase in savings of 395 TWh of energy. Based on preliminary data showing improvements of 2x in extraction efficiency with diffuser films, we will optimize surface relief structures to maximize the light extraction efficiency of OLED devices and test the optimized structures in prototype samples. To address the DOE desire for rapid SSL acceptance, Luminit, LLC, proposes to develop a new Light Extraction System for OLED (LESO) implemented in an ultraviolet (UV)-curable HRI polymer. The LESO uses optimized surface relief structures in high-index and low-index interfaces, which will significantly increase light extraction from the OLEDs. The LESO will significantly reduce environmental pollution compared to incandescent, compact fluorescent (CFL), and LED lamps. It will do so at a low price compared to other technologies, and with extremely high quality lighting (nearly perfect color matching, for example). Through LESO adoption, both CO 2 and other pollutants will be reduced by hundreds of megatons annually.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Adaptive lighting for streets and residential areas

Adaptive lighting is an approach to lighting application in which the lighting levels are controlled based on the needs of the users of the lighted environment. Such systems are enabled by the instant-on and dimming capabilities of solid-state lighting and have been shown to have the potential to reduce energy consumption by over 50%, both through the use of maintained lighting levels without over-lighting and dimming. This investigation considered the impact of adaptive lighting within Cambridge NA. The impact of adaptive lighting on crashes and crime was considered using both the timing of the installation of the LED system in a before-and-after comparison, as well as a comparison to a neighboring non-dimming city. Industry practitioners and the public were also surveyed. As a follow-on to the first analysis, a human factors experiment was performed to investigate if the lighting levels could be further refined to improve energy performance. Overall, the energy savings from the dimming system range from 55% initially to 36% at the end of the life of the luminaire system

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Light sources with bias tunable spectrum based on van der Waals interface transistors

Light-emitting electronic devices are ubiquitous in key areas of current technology, such as data communications, solid-state lighting, displays, and optical interconnects. Controlling the spectrum of the emitted light electrically, by simply acting on the device bias conditions, is an important goal with potential technological repercussions. However, identifying a material platform enabling broad electrical tuning of the spectrum of electroluminescent devices remains challenging. Here, we propose light-emitting field-effect transistors based on van der Waals interfaces of atomically thin semiconductors as a promising class of devices to achieve this goal. We demonstrate that large spectral changes in room-temperature electroluminescence can be controlled both at the device assembly stage –by suitably selecting the material forming the interfaces– and on-chip, by changing the bias to modify the device operation point. Even though the precise relation between device bias and kinetics of the radiative transitions remains to be understood, our experiments show that the physical mechanism responsible for light emission is robust, making these devices compatible with simple large areas device production methods.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Using all of the Energy from the Sun to Make Power

Representing the Center for Energy Nanoscience (CEN), this document is one of the entries in the Ten Hundred and One Word Challenge and was awarded "Overall Winner Runner-up." As part of the challenge, the 46 Energy Frontier Research Centers were invited to represent their science in images, cartoons, photos, words and original paintings, but any descriptions or words could only use the 1000 most commonly used words in the English language, with the addition of one word important to each of the EFRCs and the mission of DOE: energy. The mission of the CEN is to explore the light absorption and emission in organic and nanostructure materials and their hybrids for solar energy conversion and solid state lighting.

14 SOLAR ENERGY↗
DOE OSTI2018

Mining Unexplored Chemistries for Phosphors for High-Color-Quality White-Light-Emitting Diodes

There is a critical need for new earth-abundant phosphors to enable next-generation, highly efficient solid-state lighting. Here we report the discovery of Sr 2 LiAlO 4 , the first known Sr-Li-Al-O quaternary crystal, via a carefully targeted data-driven structure prediction and screening effort using density functional theory calculations. Sr 2 LiAlO 4 is predicted and experimentally confirmed to be a thermodynamically and thermally stable phosphor host that can be excited with near-UV/blue sources. The Eu 2+ - and Ce 3+ -activated Sr 2 LiAlO 4 phosphors exhibit broad emissions at λ max ~ 512 nm (green-yellow) and λ max ~ 434 nm (blue), respectively, with excellent thermal quenching resistance of >88% intensity at 150°C. A prototype phosphor-converted white LED utilizing Sr 2 LiAlO 4 -based phosphors yields an excellent color-rendering index exceeding 90. Sr 2 LiAlO 4 therefore exhibits great potential for industrial applications in low-cost, high-color-quality WLEDs.

Wang, Zhenbin↗
DOE OSTI2019

Enhanced Light Extraction from Low Cost White OLEDs Fabricated on Novel Patterned Substrates” (Final Report)

Organic LEDs (OLEDs) are a very attractive emerging solid state lighting (SSL) technology. Currently, one of the main challenges is to increase the extraction of the light generated inside the OLED into the forward (viewing) hemisphere. In conventional OLEDs fabricated on a transparent flat anode coated on glass the outcoupling factor is only about 20%. About 50% of the light is lost at the metal cathode (surface plasmon excitation), and waveguided internally in the organic layers and the transparent anode. Another ~30% is waveguided in the substrate to its edges. The research addressed this issue of outcoupling by evaluating OLEDs fabricated on corrugated plastic substrates manufactured in a cost-effective approach. It demonstrated that the outcoupling from such OLEDs can exceed 50% by mitigating plasmon–related loss and internal waveguiding, even without the addition of a microlens array or a hemispherical lens, either of which extracts the light trapped in the substrate. Simulations conducted in parallel with the experimental effort demonstrated how the corrugation assists in the outcoupling. The project also evaluated the role of the corrugation pitch and height in determining the outcoupling factor and other properties of the OLEDs. The technical effectiveness and economic feasibility of the project lie in the patterning of the extracting plastic substrates in an approach that is scalable to roll-to-roll (R2R) manufacturing. R2R processes are drastically lower-cost than batch or single-unit fabrication. The corrugated plastic substrates studied are part of an integrated substrate that includes also a microlens array at the air-side of the substrate and a conductive electrode. The project that was a university-industry collaboration is of major benefit to the public as it demonstrates the feasibility of manufacturing highly efficient OLEDs for SSL in a R2R process, which would drastically reduce the manufacturing cost and increase production in the USA. SSL is efficient and environmentally-friendly. It reduces electricity consumption, and hence lighting cost.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Roadmap on perovskite light-emitting diodes

Abstract In recent years, the field of metal-halide perovskite emitters has rapidly emerged as a new community in solid-state lighting. Their exceptional optoelectronic properties have contributed to the rapid rise in external quantum efficiencies (EQEs) in perovskite light-emitting diodes (PeLEDs) from <1% (in 2014) to over 30% (in 2023) across a wide range of wavelengths. However, several challenges still hinder their commercialization, including the relatively low EQEs of blue/white devices, limited EQEs in large-area devices, poor device stability, as well as the toxicity of the easily accessible lead components and the solvents used in the synthesis and processing of PeLEDs. This roadmap addresses the current and future challenges in PeLEDs across fundamental and applied research areas, by sharing the community’s perspectives. This work will provide the field with practical guidelines to advance PeLED development and facilitate more rapid commercialization.

14 SOLAR ENERGY↗
DOE OSTI2024

Synthetic Control of Water-Stable Hybrid Perovskitoid Semiconductors

Hybrid metal-halide perovskites and their derived materials have emerged as the next-generation semiconductors with a wide range of applications, including photovoltaics, light-emitting devices, and other optoelectronics. Over the past decade, numerous single-crystalline perovskite derivatives have been synthesized and developed. However, the synthetic methods for these derivatives mainly rely on acidic crystallization conditions. This approach leads to crystals comprising metal halide building blocks, which show problematic stability when directly exposed to water. In this study, a methodology is developed for synthesizing hybrid metal-halide compounds using lead iodide and the zwitterionic bifunctional molecule cysteamine (CYS), to form various perovskitoid structures under a broad pH range. Interestingly, the different pH conditions alter the coordination environment of lead halides, leading to lead-sulfide and lead-nitride covalent bond formation. This modification significantly enhances their stability when in direct contact with water, lasting for months. Photoluminescence measurements and first principal density functional theory (DFT) calculations reveal that the perovskitoids synthesized under basic and acidic pH conditions exhibit a direct bandgap nature, while those synthesized under neutral conditions display an indirect bandgap. This approach opens new avenues for manipulating synthetic methods to develop water-stable hybrid semiconductors suitable for a wide range of applications, such as solid-state light emitters.

36 MATERIALS SCIENCE↗