Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Siting Lab”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Findings on Subtask 3.1 - Bakken Rich Gas Enhanced Oil Recovery Project

Total in-place oil for the Bakken petroleum system (BPS) (which includes the Bakken and Three Forks Formations) has been estimated to be 600 billion barrels (bbl). However, BPS wells have decline rates as high as 85% over the first 3 years of their lives, and primary recovery factors typically range from 3% to 10% of original oil in place. Given the low initial recovery rates, even small incremental productivity improvements could dramatically increase technically recoverable oil in the BPS. One potential solution is enhanced oil recovery (EOR) using gas injection, such as carbon dioxide (CO2) or hydrocarbon (HC) gases. While commonly used in conventional reservoirs, CO2 EOR in unconventional tight oil reservoirs has been limited to pilot tests. EOR using rich gas (mixture of methane, ethane, and propane) has also been employed in numerous pilots in several unconventional plays and has recently been successfully applied in the Eagle Ford play. If successful, large-scale gas-based EOR in the BPS could dramatically increase oil productivity and recovery factors and extend the life of the play for decades. While CO2 may be a technically suitable working fluid for EOR in the BPS, supplies are limited and costs for using CO2 in EOR pilots are prohibitively high. Meanwhile, produced gas flaring has presented challenges for BPS operators in North Dakota. Analysis conducted by the North Dakota Pipeline Authority indicates that the current gas-gathering infrastructure in North Dakota is insufficient to accommodate all of the associated gas that is produced from the BPS. The geographically isolated location of North Dakota relative to large natural gas markets, combined with suppressed natural gas prices, has made it economically challenging for industry to invest capital in expanding gas-gathering infrastructure in the state. These circumstances led to a research program conducted by the Energy & Environmental Research Center (EERC) in partnership with Liberty Resources Management Company LLC (LR) to examine the potential to use rich gas injection for EOR and mitigate flaring. A rich gas EOR pilot test was designed and executed by LR at its Stomping Horse development area in Williams County, North Dakota. From July 2018 through May 2019, a total of 160 million standard cubic feet (MMscf) of rich produced gas was injected into the BPS using five different wells in a sequential injection strategy. LR’s Leon–Gohrick drill spacing unit (DSU) was used as the test site. Regulatory oversight was provided by the North Dakota Industrial Commission (NDIC). Technical support was provided by the EERC through a series of laboratory, modeling, and field-based activities, and additional post-pilot research activities incorporated learnings from the test, developed new laboratory data, improved fracture modeling methods, and developed machine learning and big data analytics. The results from the Stomping Horse rich gas EOR pilot activities indicate that developing an effective, economical EOR approach for the BPS will require more field tests. Another key lesson learned from the Stomping Horse tests is that detailed pre- and posttest data on reservoir conditions and fluids production are essential. Robust reservoir characterization provides information that is crucial to creating realistic geomodels and conducting valid dynamic simulations of potential EOR scenarios. A detailed understanding of the completions and production history of offset wells is also necessary for valid test result interpretations. This knowledge is essential to designing the operational parameters of injectivity tests and interpreting the results. A conformance control strategy is also essential to success. Laboratory-based examinations of rich gas interactions with reservoir fluids and rocks were conducted, with an emphasis on determining the ability to mobilize oil in the tight reservoir rocks and shales of the BPS. Injection fluid composition was shown to have a positive impact on reducing reservoir oil minimum miscibility pressure (MMP), reducing interfacial tension (IFT), and altering wettability. IFT and contact angle measurements demonstrated that wettability can be altered in the presence of rich gas, suggesting the potential to improve oil recovery. Iterative modeling of surface infrastructure and reservoir performance using data generated by the various project activities was conducted. A geologic model of the Stomping Horse area was built; history-matched oil, gas, and water production was used in simulations of various EOR scenarios. Early programmatic modeling results were used to support LR’s design and operation of the EOR pilot and to provide insight regarding optimization of future commercial-scale BPS EOR design and operations. Post-pilot modeling focused on alternative methods of understanding complex fracture networks and accelerating simulation time. These led to improved simulation run times and provide excellent history-matching results. Several of these iterative models were used as the bases for developing algorithms into machine learning and big data analytics. History matching in reservoir simulation is time-consuming and computer processing-intensive. Machine learning algorithms were created, and an automated history-matching tool was developed. A large set of synthetic reservoir simulations were created to generate well responses (oil, gas, and water production, well bottomhole pressure [BHP], and tracer or propane breakthrough) for a set of EOR operating parameters that included offset well status (open or closed), injectate (rich gas or propane), injection rate, and injection well BHP. A user interface was developed to provide real-time visualization. Machine learning-based models were developed to provide rapid forecasting of well performance given a set of user-defined EOR operating parameters. These predictive models allow the user to modify the offset well status, injection rate, and injection well BHP and rapidly forecast future production performance. The combination of real-time visualization tools with real-time forecasting tools provides a framework for real-time control—operational changes that the EOR site operator can enact (e.g., changing gas injection rates) to affect the observed performance and potentially improve the EOR outcome. There is great reason to be optimistic about the future of EOR in the Bakken. The results of the laboratory studies suggest significant potential for high rates of oil mobilization using produced field gas injection under the right conditions. The results of the lab studies, combined with rigorous statistical analysis of well production data and associated modeling efforts, confirm the notion that fluid mobility within the reservoir is controlled by fractures. As more knowledge is gained about the nature and distribution of fracture networks in the Bakken, the industry will be in a better position to predict and, ultimately, influence fluid mobility. New field tests are necessary to develop a more complete understanding of those conditions. Thoughtful and creatively engineered field tests within a well-characterized geologic setting will yield the fundamental knowledge needed to take Bakken oil production to the next level. This subtask was cofunded through the EERC–U.S. Department of Energy Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. Nonfederal funding was provided by the North Dakota Industrial Commission’s Oil and Gas Research Program and Computer Modelling Group.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2025

The Effect of Flow on CO2 Corrosion of Self-Healing Metallic Coatings

Internal corrosion is an issue that affects natural gas pipelines, a significant part of the United States energy infrastructure. Over time, this corrosion has worn away longstanding pipelines due to the original construction materials used for the lines and impurities in the gas and liquid streams flowing through them. The main impurities in natural gas are H2O, CO2, H2S, and O2. One of the leading causes of corrosion is the CO2 dissolved in water, giving rise to carbonic acid formation, which can further dissolve the steel pipe. The National Energy Technology Laboratory (NETL) has been studying different solutions to this problem. One potential answer is a self-healing sacrificial metallic coating applied by a novel cold spray technique. Previous studies at NETL have shown that the zinc-rich self-healing coating can withstand corrosion through passivation and create a barrier to the diffusion of corrosive species. This study explored the impact of flow on corrosion with this coating and carbon steel when exposed to a saturated CO2 environment by simulating the pipeline flow profile in a small-scale lab setting. The samples were evaluated using multiple electrochemical techniques that found corrosion rates and were backed up with surface analysis to conclude the behavior of the corrosion mechanisms.

CO2 corrosion↗
DOE OSTI2020

Mercury Speciation via Diffusive Gradients Thin-Films Technology

Objectives: Develop and test various diffusive gradient in thin films (DGT) samplers for mercury - SRNL is developing reactive DGTS (rDGTs). Test chemistry to differentiate methylmercury from total and/or inorganic mercury in environmental samples. Fabricate and test rDGT samplers for deployment. Deploy the rDGTs in variable settings. Mercury is a persistent-bioaccumulative-toxic environmental pollutant. Mercury exists in different species such as elemental, inorganic, and methyl. Mercury speciation determine mercury behavior and toxicity. For example, methylmercury strongly accumulates in biota such as fish resulting in potential human health impacts. DGTs are innovative samplers to measure water concentration by diffusion and capture. Types of Hg DGTs used: Total Hg, Inorganic Hg, and Methyl Hg. Deployment Sites: Upper Three Runs, Lower Three Runs, Steele Creek, East Fork Poplar Creek (SRNL Sites), Horizons Creek, NOA Creek, Bruners Creek (ORNL Sites). DGT concentration estimates closely matched alternative measurements for soluble mercury at each Oak Ridge site - DGTs did not respond to particulate mercury. DGTs provide a representative measure for biota uptake since they are left out longer which allows for an average exposure concentration. DMA-80 provided an efficient and quick analysis. Variability in site location made a difference in Hg species. DGT preparations and sampling wasn't as quick and simple as microcolumn technology. Copper reagent degraded agarose gel - more work and cleaner data are needed to assess speciation in rDGTs. Future Work: Use cross-linked polyacrylamide for the collection layer for a stronger plastic. Make a copper diffusion layer without agarose. Test copper separation in lab using realistic stream conditions such as high organic carbon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Social Aspects and Considerations for Agrivoltaics Implementation

Integrated PV technologies - such as agrivoltaics - have potential to address challenges associated with siting and land use for solar. This presentation provides an overview of agrivoltaic R&D activities in the United States and focuses on the non-technical aspects of implementation, specifically social considerations around collaboration, planning, and acceptance.

14 SOLAR ENERGY↗
DOE OSTI2025

2024 Annual Site Environmental Report for Sandia National Laboratories, Livermore, California

Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly-owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration. The National Nuclear Security Administration’s Sandia Field Office administers the Prime Contract and oversees contractor operations at Sandia National Laboratories, California. Activities at this multi-program engineering and science laboratory support the nuclear weapons stockpile program, energy and environmental research, homeland security, micro- and nanotechnologies, and basic science and engineering research. The U.S. Department of Energy’s National Nuclear Security Administration and its management and operating contractor are committed to fulfilling regulatory obligations, safeguarding the environment, assessing sustainability practices, and ensuring the validity and accuracy of the monitoring data presented in this annual site environmental report (ASER). This report provides a summary of environmental monitoring and compliance activities that occurred at Sandia National Laboratories, California, during calendar year 2024, unless noted otherwise. General site and environmental program information is also included. This report was prepared in accordance with DOE Order 231.1B, Admin Change 1, Environment, Safety and Health Reporting.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Preliminary Assessment of PV + Electric Storage Options at the Energy Coordinating Agency

NREL used the REopt (R) platform to evaluate the techno-economic potential of adding solar PV and electric storage at the Energy Coordinating Agency (ECA) in Philadelphia, PA. The site has access to 600 PV panels (rated at 305 W each) and would like to evaluate the potential of pairing them with battery storage to offset electricity costs, increase renewable energy usage, and establish an onsite microgrid.

14 SOLAR ENERGY↗
DOE OSTI2020

Depth-First Search Image Chasing

This presentation contains results from work on an active NNSS Site-directed research and development (SDRD) project: NLV-019-20. It describes a new algorithm for "few-angle tomography", which can be used to reconstruct an approximation to an object from limited quantities or radiographs under specific conditions. This presentation is an initial documentation of research results thus-far, and we would like to share these methods with colleagues at Lawrence Livermore National Lab who have an expertise in the area of few-angle tomography. Sharing this presentation will be done via email and or teleconference amongst DoE personnel. In the future, we would also like to share these results with collaborators from Academia as well.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

The Electron-Ion Collider - A machine that will unlock the secrets of the strongest force in nature!

The computers and smartphones we use every day depend on what we learned about the atom in the last century. All information technology – and much of our economy today – relies on understanding the electromagnetic force between the atomic nucleus and the electrons that orbit it. The science of that force is well understood, but we still know little about the microcosm within the protons and neutrons that make up the atomic nucleus. That’s where Brookhaven National Laboratory (BNL) comes in. Brookhaven National Laboratory (located in Suffolk County, NY, about 60 miles east of midtown Manhattan) was recently chosen as the building site for an Electron-Ion Collider (EIC), a one-of-a-kind nuclear physics research facility. The EIC will be a discovery machine for unlocking the secrets of the “glue” that binds the building blocks of visible matter in the universe. The machine design will take advantage of the existing and highly optimized Relativistic Heavy Ion Collider (RHIC) that’s been operating at Brookhaven Lab since 2000. Beyond sparking scientific discoveries in a new frontier of fundamental physics, the Electron-Ion Collider will trigger technological breakthroughs that have broad-ranging impact on human health and national challenges.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Witness the Trinity test through Lab artifacts

July 16 marks the 77th anniversary of the Trinity test, conducted in a desert in New Mexico. The test subject, an atomic bomb called The Gadget, was successfully detonated from a 100-foot steel tower. This event marks the commencement of the Atomic Age, a new era where fission capabilities could be employed for national security purposes. Shortly after the Trinity test, two Los Alamos-created atomic weapons were released above Japan, helping to end the world’s bloodiest conflict just weeks later. “Trinity was one of the greatest scientific experiments ever,” said NSRC Senior Historian Alan Carr said. “Los Alamos scientists changed the world forever on that day. Not only was it the dawn of the Atomic Age, but also the beginning of the Lab’s eight decades of cutting-edge science and its national security charge.” To preserve this event, and to continue to learn more about this critical moment in history, the National Security Research Center (NSRC) curates a collection of photographs, films, notes, unclassified artifacts and numerous other materials related to the science of the test. Notably, the collection includes a novel material that formed at the site, trinitite, and artifacts from one of the intriguing scientists present at the test, Enrico Fermi.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2026

SULI End of Summer Presentation

This presentation made on Power Point is a brief summary of my work enhancing the Supervisory Control and Data Acquisition (SCADA) architecture for Idaho National Lab’s Critical Infrastructure Test Range Complex (CITRC). This work was part of an on-going project to create a digital twin of CITRC that will be implemented for resiliency research. Resiliency is growing more important as extreme weather, aging infrastructure, and increasing load all exert stress on the United States power grid. This presentation highlights how I documented the existing devices and data flow on site and then updated specific device settings to better support the needs of the project. It also examines future use of this data in the digital twin data warehouse (DeepLynx), and future Artificial Intelligence and Advanced Distribution Management System applications. It will be presented to the B751 Water and Energy Systems Analysis group at INL during my last week.

24 - POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Differential Ligation Alters Electronic State and Coupling Signals of Iron-Sulfur Clusters in Flavin-Based Electron Bifurcation

Flavin-based electron bifurcation (FBEB) is employed by microorganisms for controlling pools of redox equivalents by reversibly splitting electron pairs into high- and low-energy levels from an initial midpoint potential. Our ability to harness this phenomenon is crucial for biocatalytic design which is limited by our understanding of energy coupling in the bifurcation system. In Pyrococcus furiosus, FBEB is carried out by the NADH-dependent ferredoxin:NADP+-oxidoreductase (NfnSL), coupling the uphill reduction of ferredoxin in NfnL to the downhill reduction of NAD+ in NfnS from oxidation of NADPH. Flanking the bifurcating flavin are two site-differentiated iron-sulfur clusters; the nearest is a glutamate-ligated [4Fe-4S] cluster in NfnL. Recent biochemical experiments substituting the native glutamate with cysteine led to loss of coupling between the uphill and downhill pathways, in contrast to the tight thermodynamic coupling in the native system. To understand how this decoupling is biochemically manifested by the cysteine-substituted [4Fe-4S] in NfnL, we employed electron paramagnetic resonance (EPR) spectroscopy to identify changes in electronic architecture and square wave voltammetry (SWV) to probe thermodynamic shifts produced by the substitution. We observed notable g-value shifts in the EPR for the cysteine-substituted iron-sulfur cluster in addition to significant downward shifts in the redox potential, as well as the disappearance of several low-field signals observed in the native NfnSL complex. These results suggest the site-differentiated glutamate residue facilitates higher spin states in the [4Fesingle bond4S] cluster to bridge energetic gaps in electron transfer to the bifurcating flavin in the native complex, preventing unwanted short-circuiting seen in the cysteine-substituted complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Location generalizability of image-based air quality models

This paper is to be submitted at the IEEE/CVF Winter Conference on Applications of Computer Vision (WACV) Computer Vision for Earth Observation workshop. The full paper abstract is below: The ability to rapidly quantify atmospheric pollutants is important both for global emissions monitoring and for mitigating the adverse effects that follow a hazardous chemical release. In the aftermath of a chemical release, imagery is often the only available resource to assess local conditions. Recent work has demonstrated initial success in predicting particulate matter pollution from imagery; however, these results are tied to a specific site and do not generalize to new geographic locations. In this work, we seek to understand how easily deep learning models generalize to new locations in the context of image-based air quality assessments, targeting two distinct tasks: (1) broad measures of particulate matter pollution, and (2) the mass of a given chemical released in hazardous plumes. For the latter, we focus on sulfur dioxide, a toxic aerosol and a major component of particulate matter pollution caused by industrial fossil fuel consumption. To develop a model that operates in the widest possible range of environments, we test different training strategies, including the use of new geolocation foundation models. The best performing models achieve >80% accuracy when evaluating unseen imagery at previously seen sites, but we find significant drops in performance when evaluating imagery from unseen sites, at best 65%. Additionally, we present the public release of the National Parks Air Quality Index Dataset, a new medium-sized dataset that pairs imagery with sensor-based air quality measurements at 15 different national parks.

Byler, Eleanor B. [BATTELLE (PACIFIC NW LAB)]↗
DOE OSTI2025

Optical properties of vacancies in aluminum oxide (𝛼−Al 2 ⁢O 3 ) from first principles

We employ first-principles calculations based on hybrid density functional theory to investigate the structural and optical properties of the oxygen vacancy (𝑉 O ) and aluminum vacancy (𝑉 Al ) in 𝛼−Al 2 ⁢O 3 , the most stable (corundum) phase of alumina. Our calculations facilitate the identification of experimental excitation and luminescence spectra with specific electronic transitions at the vacancy sites. The absorption line shape for excitation of an electron at 𝑉$^0_O$ to the conduction-band minimum (CBM) is in excellent agreement with the 6.1 eV band detected by optical absorption spectroscopy, and we find that the 5.9 eV absorption band is generated by an internal electron transition at 𝑉$^0_O$. We confirm that the slowly decaying 3.0 eV emission band of the 𝐹 center is due to a triplet-singlet transition at 𝑉$^0_O$. Our calculations also reveal that the 4.8 eV/5.4 eV absorption and 3.8 eV emission bands assigned to the 𝐹 + center are generated by internal transitions at 𝑉$^{+1}_O$. The line shape for the excitation of an electron from 𝑉$^{+1}_O$ to the CBM agrees well with an absorption band at 6.4 eV, while the recombination of an electron with 𝑉$^{+2}_O$ also produces luminescence around 3.8 eV, but with a considerably broader line shape. For Al vacancies, we confirm that the most prevalent configuration in 𝛼−Al 2 ⁢O 3 is a split-vacancy configuration 𝑉 Al,s , and we calculate migration barriers for different directions in the corundum crystal. We predict absorption and emission spectra for the excitation and recombination of an electron localized at 𝑉$^{−3}_{Al}$ and 𝑉$^{−3}_{Al,s}$ sites with the CBM. The line shapes of the two 𝑉 Al configurations overlap and are considerably broader than the spectra corresponding to 𝑉 O .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Understanding power and energy utilization in large scale production physics simulation codes

Power is an often-cited reason for the move to advanced architectures on the path to Exascale computing. Here, this is due to practical considerations related to delivering enough power to successfully site and operate these machines, as well as concerns about energy usage while running large simulations. Since obtaining accurate power measurements can be challenging, it may be tempting to use the processor thermal design power (TDP) as a surrogate due to its simplicity and availability. However, TDP is not indicative of typical power usage while running simulations. Using commodity and advanced technology systems at Lawrence Livermore and Sandia National Labs, we performed a series of experiments to measure power and energy usage in running simulation codes. These experiments indicate that large scale Lawrence Livermore simulation codes are significantly more efficient than a simple processor TDP model might suggest.

HPC↗
DOE OSTI2025

Remote Sensing and Fluxes Upscaling for Real-world Impact (Workshop Report)

The "Remote Sensing and Fluxes Upscaling for Real-world Impact" workshop, held on July 9-10, 2024, at Lawrence Berkeley National Lab, was a collaborative effort led by the AmeriFlux Management Project, NEON, and the Carbon Dew Community of Practice. The event brought together over 200 registrants and approximately 100 attendees each day, including leading experts, researchers, and practitioners. The primary focus was on bridging the gap between cutting-edge research and practical applications in environmental monitoring by integrating remote sensing and flux data. Key themes included the importance of site-level measurements for validating remote sensing products, providing nature-based climate solutions, and addressing challenges such as instrument costs and the need for standardized methods. At the regional scale, discussions centered on addressing spatial heterogeneity and using high-resolution remote sensing and machine learning methods to enhance data interpretation. Global scale challenges included data consistency, gap filling, and accurate emission source identification, with opportunities for international collaboration and standardized practices to improve global carbon budget assessments. The workshop emphasized the critical need for integrating data across local, regional, and global scales through explicit scale-matching and developed a workflow for scaling flux data using "straight shot" and "explicit nesting" approaches. The event highlighted the importance of connecting scientific research with real-world applications in carbon, energy, and water management, ensuring that advancements translate into tangible societal benefits. These insights will guide future research, technology transfer, and collaboration, maximizing the potential of environmental fluxes to address real-world challenges.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

(Oxy)hydroxides Formed on Aluminum Fuel Materials After Irradiation and Long-Term Wet Storage - 20354

The aluminum cladding of research-reactor fuel experiences general corrosion when in contact with water during in-reactor service and post-discharge wet storage, resulting in the formation of adherent aluminum (oxy)hydroxide films. These (oxy)hydroxides contain chemically-bound water that poses challenges for extended dry storage due to the risk of thermal or radiolytic decomposition releasing free water and/or hydrogen and oxygen gases. This study describes characterization of the (oxy)hydroxides present on several aluminum materials used in reactor operation and subsequently stored wet in the L-Basin storage facility at the Savannah River Site (SRS) for an extended period. Characterization data providing insight into the loading, composition, and morphology of (oxy)hydroxides to be expected on service-exposed aluminum cladding provides valuable benchmarks for designing adequate drying and dry-storage approaches. This work is part of a broader investigation to address knowledge gaps and technical data needs for dry storage of aluminum-clad spent nuclear fuel (ASNF), which included in-lab growth of (oxy)hydroxide films on aluminum alloy substrates to investigate formation behavior, investigation of drying methods to remove existing (oxy)hydroxides from ASNF cladding, and measurement of radiolytic yield of hydrogen from (oxy)hydroxide powders and films. In this study, (oxy)hydroxide films were characterized for three aluminum-alloy materials used in reactors and subsequently stored wet for up to approximately 40 years in L-Basin at SRS: one cropping from a Missouri University Research Reactor (MURR) fuel element (Al-6061 alloy), one cropping from a Universal Sleeve Housing (USH) (Al-6063 alloy), and one Mark-16B fuel assembly (either Al-6061 or Al- 6063). The USH and Mark-16B were used in SRS production reactors. Characterization of the as-received (oxy)hydroxides included scanning electron microscopy (SEM) in both plan-view and cross-section to characterize the (oxy)hydroxide layer's morphology, thickness, and structure. X-ray diffraction (XRD) was used to identify the chemical composition and distinguish between the various aluminum (oxy)hydroxides known to form under reactor and storage conditions. XRD analysis revealed both bayerite (Al(OH)3) and boehmite (AlOOH) on the surface of the MURR and USH samples, as well as bayerite, boehmite, and gibbsite (another Al(OH)3 polymorph) on the surface of the Mark-16B sample. The aluminum trihydroxides, bayerite and gibbsite, are typically associated with corrosion in low-temperature (<80 deg. C) water, while boehmite is expected to form at higher water temperature (>80 deg. C). The presence of bayerite on the USH, which is believed to have operated close to 90 deg. C, suggests that boehmite formed during in-reactor exposure was not protective against further hydroxide growth in low-temperature wet storage. Cross-section scanning electron microscopy (SEM) showed total (oxy)hydroxide layer thicknesses of ∼5- 10 μm for the MURR and ∼5-15 μm for the Mark-16B. The thickness of the USH's (oxy)hydroxide layer was indiscernible by the current mounting and imaging method, despite plan-view SEM and XRD confirming the presence of an (oxy)hydroxide layer. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Sapling bark water vapor conductance measurements from 2016-2019, Panama

This data package contains lab-based measurements of bark water vapor conductance from saplings in seasonally dry forests in the Parque Natural Metropolitano and Eugene Eisenmann Reserve, and a shadehouse in Panama. A total of 14 populations of 8 tree species were measured. The goal was to test whether bark water vapour conductance (gbark) was associated with values of stem water deficit that were published previously. In the attached zip file are two Excel metadata files with site information and descriptions of the CSV datasets included, as well as a PDF file "Sapling bvc metadata description," which describes the methods and protocol thoroughly. This data is associated with the publication Wolfe Brett T. 2020Bark water vapour conductance is associated with drought performance in tropical treesBiol. Lett.1620200263 https://doi.org/10.1098/rsbl.2020.0263.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Low-Power, Flexible Sensor Arrays with Solderless Board-to-Board Connectors for Monitoring Soil Deformation and Temperature: Supporting Data

This dataset was used to assess the potential of a Soil Deformation and Temperature Monitoring System developed and presented in the article named "Low-Power, Flexible Sensor Arrays with Solderless Board-to-Board Connectors for Monitoring Soil Deformation and Temperature" and published in Sensors. There are 21 comma-delimited data files (.csv). 14 files contain current measurements performed in a lab setting, enabling the electrical evaluation of the sensor probe. These files are generated by the Keithley DMM6500 multimeter, and list the measured supply current (first column) as a function of time (3rd column). Another set of 6 files is also acquired in lab experiments, but contain soil temperature an deformation measurements, enabling an assessment of the developed device's accuracy. In these files, the first column contains the time (UTC), followed by the sensor's battery voltage and temperature and acceleration values (X, Y, Z) in subsequent columns. The measurements were acquired every 5 seconds. Another .csv file contains field data in a similar format (time, temperature, acceleration) collected at the Teller road (mile 27) site near Nome, Alaska with one probe. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗