Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SiO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

SiO2 Activity Measurements in the Gd2O3-SiO2 System Via Knudsen Effusion Mass Spectrometry (KEMS)

Environmental barrier coatings (EBCs) are required for the use of silicon carbide (SiC)-based ceramic matrix composites (CMCs) in gas turbine engines, as they protect the SiO 2 thermally grown oxide (TGO) formed at the CMC/coating interface from volatilization in a combustion environment. Current-generation EBCs consist of a silicon bond coat and a rare earth (RE) silicate topcoat. The RE silicate topcoat is exposed to high-velocity steam during engine operation, and SiO 2 within the coating can preferentially volatilize to form Si(OH) 4 gas species, albeit at a lesser degree than SiO 2 alone. Therefore, it is of interest to investigate the stability of these materials in steam as a function of their RE. In this study, SiO 2 activity, which can be related to the partial pressure of Si(OH) 4 , was measured across the Gd 2 O 3 -SiO 2 phase diagram, which includes Gd 2 SiO 5 , Gd 9.33 (SiO 4 ) 6 O 2 , and Gd 2 Si 2 O 7 as line compounds, via Knudsen Effusion Mass Spectrometry (KEMS). Values obtained for the Gd 2 O 3 -SiO 2 system were compared to those of other RE2O3-SiO2 systems and contextualized in terms of EBC viability.

EBCs↗
DOE OSTI2021

In Situ Synthesis of Graphene-Coated Silicon Monoxide Anodes from Coa-Derived Humic Acid for High-Performance Lithium-Ion Batteries

Silicon monoxide (SiO) is attaining extensive interest amongst silicon-based materials due to its high capacity and long cycle life; however, its low intrinsic electrical conductivity and poor coulombic efficiency strictly limit its commercial applications. Here low-cost coal-derived humic acid (HA) is used as a feedstock to synthesize in-situ graphene-coated disproportionated SiO (D-SiO@G) anode with a facile method. HRTEM and XRD confirm the well-coated graphene layers on an SiO surface. Scanning Transmission X-ray Microscopy (STXM) and X-ray Absorption Near-Edge Structure (XANES) spectra analysis indicate that the graphene coating effectively hinders the side-reactions between the electrolyte and SiO particles . As a result, the D-SiO@G anode presents an initial discharge capacity of 1937.6 mAh g -1 at 0.1 A g -1 and an initial coulombic efficiency (ICE) of 78.2%. High reversible capacity (1023 mAh g -1 at 2.0 A g -1 ), excellent cycling performance ( 72.4% capacity retention after 500 cycles at 2.0 A g -1 ), and rate capability (774 mAh g -1 at 5 A g -1 ) results are substantial. Full coin cells assembled with LiFePO 4 electrodes and D-SiO@G electrodes display impressive rate performance. These results indicate a promising potential for practical use in high-performance lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Generalized Synthesis of Highly-Dispersed, Ultrafine Transition Metal Nanoparticles on Silica Spheres for Enhanced Optical Absorption

Robust synthesis of ultrafine metal nanoparticles (ufMNPs) below 5 nm with clean surfaces and strong optical absorption in the visible spectral range is challenging due to their instability originating from large surface-to-volume ratios. Here, this work reports a general strategy involving two sequential steps: i) loading metal precursor ions onto the surface of silica nanospheres (SiO x NSs) by forming a uniform coating of metal oxyhydroxide [MO y (OH) z ] through preferred surface acid–base reactions and ii) thermally reducing MO y (OH) z in forming gas at elevated temperatures to form ufMNPs evenly dispersed on the surface of SiO x NSs. The capability of this synthesis strategy is verified by loading ufMNPs of various transition metals and bimetallic combinations onto the SiO x NSs. The ufMNPs exhibit strong optical absorption enhanced by the optical scattering resonances in the SiO x NSs, which generate intense electric fields near the surface of the SiO x NSs. The SiO x NSs also support stabilizing the ufMNPs, which do not need additional organic capping reagents. The successful synthesis of SiO x -NS-supported ufMNPs with clean surfaces and enhanced optical absorption is promising for exploring the photocatalytic properties of ufMNPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ion irradiation study of lithium silicates for fusion blanket applications

Here, this study reports on the microstructural and compositional evolutions, deuterium release and lithium loss behavior in lithium silicates. Pellets of biphasic Li 4 SiO 4 and Li 2 SiO 3 were fabricated using hot pressing of powders. Sequential irradiation with Si + , He + and D + ions was performed up to 773 K to emulate one-year 6 Li burnup in 6 Li 4 SiO 4 inside the SlimCS DEMO. Crystalline Li 4 SiO 4 phase was not observed in the irradiated depth region of all the samples in this study. In spite of full amorphization in the near-surface region, Li 2 SiO 3 irradiated to a high dose at 773 K remained crystalline in the damage peak region, suggesting that Li 2 SiO 3 is more irradiation resistant to amorphization than Li 4 SiO 4 . Radiolysis may be primarily responsible for silicate decomposition and amorphization. Data from this study also show that D release from the pellet is very efficient during ion irradiation at 773 K, which is accompanied with a significant Li loss. Thermal annealing for 10 min at 773 K for the room-temperature irradiated pellet leads to a nearly complete D release without an observable Li loss. A concept of Ni coating on tritium breeder materials is discussed with supporting data to minimize Li loss without a significant impact on tritium diffusion and release.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Identification and Description of a Silicic Volcaniclastic Layer in Gale Crater, Mars, Using Active Neutron Interrogation

The Dynamic Albedo of Neutrons instrument aboard the Mars Science Laboratory rover, Curiosity, has been used to map a stratigraphically-conformable layer of high-SiO 2 material in Gale crater. Previous work has shown this material contains tridymite, a high-temperature/low-pressure felsic mineral, interpreted to have a volcanic source rock. We describe several characteristics including orientation, extent, hydration, and geochemistry, consistent with a volcaniclastic material conformably deposited within a lacustrine mudstone succession. Relationships with widely dispersed alteration features and orbital detections of hydrated SiO 2 suggest that this high-SiO 2 layer extends at least 17 km laterally. Mineralogical abundances previously reported for this high-SiO 2 material indicated that hydrous species were restricted to the amorphous (non-crystalline) fraction, which is dominated by SiO2. The low mean bulk hydration of this high-SiO 2 layer (1.85 ± 0.13 wt.% water-equivalent hydrogen) is consistent with silicic glass in addition to opal-A and opal- CT. Persistent volcanic glass and tridymite in addition to opal in an ancient sedimentary unit indicates that the conversion to more ordered forms of crystalline SiO 2 has not proceeded to completion and that this material has had only limited exposure to water since it originally erupted, despite having been transported in a uviolacustrine system. Our results, including the conformable nature, large areal extent, and presence of vol- canic glass, indicate that this high-SiO 2 material is derived from the product of evolved magma on Mars. This is the rst identi cation of a silicic volcaniclastic layer on another planet, and has important implications for magma evolution mechanisms on single-plate planets.

58 GEOSCIENCES↗
NASA NTRS1989

Silicon chemistry in interstellar clouds

Interstellar SiO was discovered shortly after CO but it has been detected mainly in high density and high temperature regions associated with outflow sources. A new model of interstellar silicon chemistry that explains the lack of SiO detections in cold clouds is presented which contains an exponential temperature dependence for the SiO abundance. A key aspect of the model is the sensitivity of SiO production by neutral silicon reactions to density and temperature, which arises from the dependence of the rate coefficients on the population of the excited fine structure levels of the silicon atom. This effect was originally pointed out in the context of neutral reactions of carbon and oxygen by Graff, who noted that the leading term in neutral atom-molecule interactions involves the quadrupole moment of the atom. Similar to the case of carbon, the requirement that Si has a quadrupole moment requires population of the J = 1 level, which lies 111K above the J = 0 ground state and has a critical density n(cr) equal to or greater than 10(6)/cu cm. The SiO abundance then has a temperature dependence proportional to exp(-111/T) and a quadratic density dependence for n less than n(cr). As part of the explanation of the lack of SiO detections at low temperatures and densities, this model also emphasizes the small efficiencies of the production routes and the correspondingly long times needed to reach equilibrium. Measurements of the abundance of SiO, in conjunction with theory, can provide information on the physical properties of interstellar clouds such as the abundances of oxygen bearing molecules and the depletion of interstellar silicon.

Langer, William D.↗
NASA NTRS1998

Determination of an Infrared Reference Frame

The mission of the European Space Agency's Hipparcos satellite was to provide high precision astrometric and photometric data for over 100,000 stars and somewhat lower precision data on over a million additional stars. These observations were made in the optical band (340 - 850 nm) and resulted in median precisions of better than 1 milli-arcsec (mas) in position and parallax and I mas/yr in proper motion. The Hipparcos frame is inertial within an estimated uncertainty of +/- 0.25 mas/yr. The other important wavelength band for astrometry has been the radio band. A reference frame has been defined based on absolute Very Long Baseline Interferometry (VLBI) positions of several hundreds of radio sources. There have been a number of projects to refine the link between the optical and radio reference frames. In recent years there has been increasing interest in the astrometry of infrared sources. For example, stars with circumstellar shells can be observed in both the optical and radio (e.g. SiO maser emission). The infrared emission from such sources is dominated by thermal dust emission. The spatial distribution of radiation in the three bands is expected to be quite different. In 1982 we proposed a number of infrared-selected sources (S(sub 10 micron) greater than or approx. equal to 100 J(sub y)) for inclusion in the Hipparcos Input Catalog. Most of those sources were observed, and in Sutton (1997) we report the optical astrometric results (position, proper motion, and parallax) for 87 such sources. These sources were selected to have reasonable agreement between infrared and optical positions, and so may be used as primary standards for future infrared astrometry. They are well distributed across the sky, but exhibit some bias towards the galactic plane and the northern hemisphere. We have also obtained a set of 1480 secondary standards (unpublished) A comparison between optical positions and 86 GHz SiO maser positions for 10 sources indicates coincidence at the 0.15 arcsec level, consistent with current uncertainties in the SiO positions. Improved measurements of the SiO maser positions are needed. VLBI data show that SiO maser spots can be distributed in broken rings of radii 10 - 30 mas, presumably centered on the stellar position. However the SiO flux may be distributed asymmetrically, in which case the flux-weighted center of the SiO emission can be different from the stellar position. We have also published a related paper on phase fluctuations in millimeter interferometry (Sutton and Hueckstaedt 1996). Radiometric monitoring of emission from atmospheric water vapor may be a method for correcting for such fluctuations. This is relevant to positional determinations at centimeter and millimeter wavelengths. The integration of visible, infrared, and radio astrometry is one of our principal goals.

Sutton, Edmund C.↗
NASA NTRS2000

Earth Remote Sensing Center of Excellence at Scripps Institution of Oceanography

We developed advanced communications and networking capability and satellite reception systems for Earth science to improve the ability of scientists at Scripps Institution of Oceanography (SIO) to conduct interdisciplinary research. With matching funds from the SIO Director's office we implemented a "virtual center" utilizing modern networking hardware and software to enhance access for researchers and students to unique satellite and in situ data sets. The center provides facilities and data access to graduate students as well as research scientists at SIO, and outside SIO. Our private sector partners installed and testes and advanced X-band data acquisition system for satellite data capture relevant for Earth science research and applications. Some of the commercial applications of these partners have been developed (or are under development) with NASA SBIR resources. The X-band system collected RADARSAT, ERS-2 and MODIS imagery. Perhaps most importantly, this COE brought together - for the first time - an interdisciplinary team of SIO scientists with interests in Earth remote sensing. The collaboration extended beyond our infrastructure and research accomplishments leading to a dialog that resulted in a report with strong recommendations to the SIO community for enhancing satellite remote sensing at SIO.

Mitchell, B. Greg↗
DOE OSTI2025

A statistical representation of bond coating oxidation under environmental barrier coatings

Environmental barrier coatings (EBCs) protect SiC-based ceramic matrix composites (CMCs) in turbine hot sections from high-temperature volatilization in combustion gases. The formation of a SiO 2 thermally grown oxide (TGO) is expected under the EBC after long-term operation. The oxidation resistance of the EBC is understood as a life-limiting factor for the CMC, and this work predicts long-term oxidation behavior under EBCs through a simple statistical approach. Specimens were exposed to 1350°C isothermal conditions for 100-h thermal cycles in flowing steam for up to 1000 h. The EBC morphology, SiO 2 thickness, and SiO 2 cracking behavior were assessed. Using thousands of SiO 2 thickness measurements across many millimeters of the interface, a realistic representation of the entire TGO was captured via a lognormal distribution. The lognormal fit parameters were extrapolated out to 25 000 h to assess the degree of SiO 2 growth, the spread of SiO 2 thicknesses related to the rough oxidizing interface, and percentages of the intermediate bond coating consumed. In conclusion, local interfacial defects from the coating deposition process are identified as local failure points for EBC—CMC systems.

SiO 2↗
DOE OSTI2022

Identifying Hidden Li–Si–O Phases for Lithium‐Ion Batteries via First‐Principle Thermodynamic Calculations

SiO–based materials are promising alloys and conversion‐type anode materials for lithium‐ion batteries and are recently found to be excellent dendrite‐proof layers for lithium‐metal batteries. However, only a small fraction of the Li–Si–O compositional space has been reported, significantly impeding the understanding of the phase transition mechanisms and the rational design of these materials both as anodes and as protection layers for lithium‐metal anodes. Herein, we identify three new thermodynamically stable phases within the Li–Si–O ternary system (Li 2 SiO 5 , Li 4 SiO 6, and Li 4 SiO 8 ) in addition to the existing records via first‐principle calculations. The electronic structure simulation shows that Li 2 SiO 5 and Li 4 SiO 8 phases are metallic in nature, ensuring high electronic conductivity required as electrodes. Moduli calculations demonstrate that the mechanical strength of Li–Si–O phases is much higher than that of lithium metal. The diffusion barriers of interstitial Li range from 0.1 to 0.6 eV and the interstitial Li hopping serves as the dominating diffusion mechanism in the Li–Si–O ternary systems compared with vacancy diffusion. These findings provide a new strategy for future discovery of improved alloying anodes for lithium‐ion batteries and offer important insight towards the understanding of the phase transformation mechanism of alloy‐type protection layers on lithium‐metal anodes.

Qu, Jiale↗
DOE OSTI2021

Synthesis of Poly(ionic Liquid)s-block-poly(methyl Methacrylate) Copolymer-Grafted Silica Particle Brushes with Enhanced CO 2 Permeability and Mechanical Performance

Poly(ionic liquid) (PIL)-based block copolymers are of particular interest as they combine the specific properties of PILs with the self-assembling behaviors of block copolymers, broadening the range of potential applications for PIL-based materials. In this work, three particle brushes: SiO 2 -g-poly(methyl methacrylate) (PMMA), SiO 2 -g-PIL, and SiO 2 -g-PMMA-b-PIL were prepared through surface-initiated atom transfer radical polymerization. Unlike the homogeneous homopolymer particle brushes, the block copolymer particle brush SiO 2 -g-PMMA-b-PIL exhibited a bimodal chain architecture and unique phase-separated morphology, which were confirmed by size-exclusion chromatography and transmission electron microscopy. In addition, the influence of the introduction of the PMMA segment on the gas separation and mechanical performance of the PIL-containing block copolymer particle brushes were investigated. A significant improvement of Young’s modulus was observed in the SiO 2 -g-PMMA-b-PIL compared to the SiO 2 -g-PIL bulk films; meanwhile, their gas separation performances (CO 2 permeability and CO 2 /N 2 selectivity) were the same, which demonstrates the possibility of improving the mechanical properties of PIL-based particle brushes without compromising their gas separation performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Crack-Free Silicon Monoxide as Anodes for Lithium-Ion Batteries

The volume expansion of Si and SiO particles was investigated using a single-particle battery assembled with a focused ion beam and scanning electron microscopy (FIB-SEM) system. Single Si and SiO particles were galvanostatically charged and discharged as in real batteries. Microstructural changes of the particles were monitored in situ using FIB-SEM from two different angles. The results revealed that the volume expansion of micrometer size particle SiO was not only much smaller than that of Si, but it also kept its original shape with no sign of cracks. Additionally, this isotropic mechanical property of a SiO particle can be attributed to its microstructure: nanosized Si domains mixed with SiO 2 domains. The nanosized Si domains can mitigate the anisotropic swelling caused by the orientation-dependent lithium-ion insertion; the surrounding SiO 2 domains can act as a buffer to further constrain the localized anisotropic swelling.

25 ENERGY STORAGE↗
DOE OSTI2026

Proton Conducting Silicon Oxide Membranes as a Fluorine Free Alternative to Nafion for Low Temperature Water Electrolysis

Driven by environmental and health concerns related to per- and polyfluoroalkyl substances (PFAS), there has been growing interest in developing fluorine-free proton (H + ) exchange membrane (PEM) materials for fuel cells and water electrolyzers. In this study, we present a side-by-side comparison of the key transport properties of submicron thick, PFAS-free amorphous silicon dioxide (SiO 2 ) membranes to Nafion, a fluorinated polymer electrolyte membrane that represents the industry standard for PEM fuel cells and electrolyzers. Here, measurements of proton (H + ) conductivity (σ H + ), hydrogen (H 2 ) permeability (P H 2 ), and electrical resistivity (ρ e – ) were conducted using model thin films comprised of SiO 2 membranes deposited by atomic layer deposition (ALD). Although the H + conductivity of the SiO 2 membranes is 2–3 orders of magnitude lower than Nafion, the addition of phosphorus dopants (PO x ) improves H + conductivity such that the area specific membrane resistance of thin (<50 nm) PO x -doped SiO 2 membranes is more than an order of magnitude lower than Nafion-117. Importantly, the safe operation of such nanoscale membranes within a PEM electrolyzer is feasible thanks to the low H 2 permeability of dense SiO 2 -based membranes, which are predicted to limit H 2 crossover rates to acceptable levels for pressures up to ≈ 100 bar. As a proof-of-principle demonstration, a chip-scale water electrolyzer based on 100 nm thick PO x -SiO 2 membrane is shown to achieve a current density of 2 A cm –2 at a potential of 2.5 V. If this technology can be successfully scaled up, H + conducting oxide membranes offer an attractive PFAS-free alternative to Nafion for efficient and durable water electrolysis and fuel cell technologies.

Nafion↗
DOE OSTI2021

XANES reflects coordination change and underlying surface disorder of zinc adsorbed to silica

In this work, zinc K -edge X-ray absorption near-edge structure (XANES) spectroscopy of Zn adsorbed to silica and Zn-bearing minerals, salts and solutions was conducted to explore how XANES spectra reflect coordination environment and disorder in the surface to which a metal ion is sorbed. Specifically, XANES spectra for five distinct Zn adsorption complexes (Zn ads ) on quartz and amorphous silica [SiO 2(am) ] are presented from the Zn–water–silica surface system: outer-sphere octahedral Zn ads on quartz, inner-sphere octahedral Zn ads on quartz, inner-sphere tetrahedral Zn ads on quartz, inner-sphere octahedral Zn ads on SiO 2(am) and inner-sphere tetrahedral Zn ads on SiO 2(am) . XANES spectral analysis of these complexes on quartz versus SiO 2(am) reveals that normalized peak absorbance and K -edge energy position generally decrease with increasing surface disorder and decreasing Zn–O coordination. On quartz, the absorption-edge energy of Zn ads ranges from 9663.0 to 9664.1 eV for samples dominated by tetrahedrally versus octahedrally coordinated species, respectively. On SiO 2(am) , the absorption-edge energy of Zn ads ranges from 9662.3 to 9663.4 eV for samples dominated by tetrahedrally versus octahedrally coordinated species, respectively. On both silica substrates, octahedral Zn ads presents a single K -edge peak feature, whereas tetrahedral Zn ads presents two absorbance features. The energy space between the two absorbance peak features of the XANES K -edge of tetrahedral Zn ads is 2.4 eV for Zn on quartz and 3.2 eV for Zn on SiO 2(am) . Linear combination fitting of samples with a mixture of Zn ads complex types demonstrates that the XANES spectra of octahedral and tetrahedral Zn ads on silica are distinct enough for quantitative identification. These results suggest caution when deciphering Zn speciation in natural samples via linear combination approaches using a single Zn ads standard to represent sorption on a particular mineral surface. Correlation between XANES spectral features and prior extended X-ray absorption fine structure (EXAFS) derived coordination environments for these Zn ads on silica samples provides insight into Zn speciation in natural systems with XANES compatible Zn concentrations too low for EXAFS analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Impact of carrier wafer on etch rate, selectivity, morphology, and passivation during GaN plasma etching

The choice of carrier wafer was found to significantly influence etch rates, selectivity, and morphology in GaN micropillar etching in a Cl 2 -Ar high-density inductively coupled plasma. 7 × 7 mm 2 GaN on sapphire chips with a plasma-enhanced chemical vapor deposition SiO 2 hard mask was etched on top of 4-in. fused silica, silicon carbide, silicon, sapphire, aluminum nitride, and high purity aluminum carriers. Silicon and silicon carbide carriers reduced GaN:SiO 2 selectivity because incidental SiCl x and CCl x etch products from the carriers attack the SiO 2 mask. Aluminum nitride and high-purity aluminum carriers yielded the highest GaN:SiO 2 selectivities due to the deposition of Al-based etched by-products, while the highest GaN etch rate was achieved using the sapphire carrier since it was the most inert carrier and did not sink any Cl 2 . Overall, results indicate that SiO 2 and Al may be used as passivation materials during GaN etching, as vertical profiles were achieved when SiO 2 or Al is redeposited from the fused silica and aluminum carriers, respectively. Floor pitting, trenching, sidewall roughness, and faceting were all influenced by carrier wafer type and will be discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Maritime Fuel Cell Generator Project: 2018 – 2023

This report summarizes activity in the Maritime Fuel Cell (MarFC) Generator Project from 2018 – 2023. FY 2018 saw the implementation of upgrades and repairs, making the unit more reliable and operator friendly. In FY2019 the team engaged the Scripps Institution of Oceanography (SIO) to use the MarFC to provide zero-emission shore power to the research vessel R/V Robert Gordon Sproul while in port at the Nimitz Marine Facility in San Diego, CA. In FY2020, the MarFC unit was shipped to San Diego, CA. A fueling contract with IGX was established to support MarFC operations at SIO, with renewable hydrogen provided by the California State University Los Angeles (CSULA) hydrogen station. The project team (Sandia, Cummins/Hydrogenics) provided training to SIO staff on the technical details of the MarFC, the safe use of hydrogen in general and the MarFC in particular. The first fueling of the unit at the SIO pier was successfully completed by IGX. The first powering of a vessel with fuel-cell shore power was conducted with the R/V Robert Gordon Sproul. While the mechanical systems (lights, AC, ventilation, hydraulics, pumps and cranes) were powered without incident, problems arose when powering the computer systems. Inspections carried out in FY2021 revealed the MarFC needed routine maintenance. Maintenance was performed and the unit was upgraded. The MarFC was turned on after the year pause, and initial test data on power levels and stability were collected. FY2022 was a year spent repairing, upgrading and testing the MarFC unit. Spikes in power and voltage were observed above 60 kW that could potentially extend below 60 kW with time. Such spikes could cause problems with the Sproul electrical systems. These age-related problems, the extended time for the Sproul spent in dry dock for scheduled upgrades, and the associated need to reschedule the vessel’s high-priority science missions made it no longer possible to deploy the unit at SIO. After due consideration, the decision was made by DOE, MARAD and the project team to cease the deployment, remove the MarFC from SIO, and not pursue further deployment activities. On December 2, 2022, the MarFC unit was removed from the Scripps Nimitz Marine Facility and shipped to Fridley, Michigan. The Cummins/Hydrogenics plan for the unit is to assess the condition of the MarFC subcomponents, and then use it as a training/learning system for technical employees new to hydrogen fuel-cell technology. After summarizing project activity from 2018 – 2023, this report provides a review of lessons learned. This report provides next steps in contemplating a follow-on project that would further advance the use of fuel-cell-based shore power in a marine setting. A comparison is made of the project results to the original objectives. This report ends with an accounting of presentations stemming from the project, and a list of references.

08 HYDROGEN↗
DOE OSTI2022

The effect of silica oxide support on the catalytic activity of nickel-molybdenum bimetallic catalyst toward ethanol steam reforming for hydrogen production

This work investigates the effects of molybdenum promoter and silica oxide (SiO 2 ) support morphology on the ethanol steam reforming (ESR) performance of Nickel-Molybdenum (NiMo) bimetallic catalysts. Ordered mesoporous SiO 2 (SBA-15) and commercial SiO 2 supports were used as the oxide support materials. The synthesized catalysts were prepared via the wet impregnation method and characterized via XRD, H 2 -TPR, BET, FTIR, and Raman techniques. This study shows that NiMo bimetallic catalyst supported on SBA-15 has superior catalytic activity and better coking resistance at an intermediate temperature of 600 ⁰C than commercial SiO 2 supported catalysts. The presence of a uniform mesoporous structure of SBA-15 with an average pore diameter of ~ 2 nm can obstruct the carbon formation, leading to improved coking resistance. The catalytic enhancement of NiMo bimetallic catalysts toward ESR can also be linked to the ability of Mo promoter in enhancing the interaction between NiMo nanoparticles and SiO 2 support materials and restraining agglomeration of Ni nanoparticles, which results in further improvement of NiMo nanoparticle dispersion and inhibit its sintering. The NiMo bimetallic catalysts supported on SBA-15 illustrated the high H 2 yield of ~ 54% and carbon conversion of ~ 89% with the excellent stability for ESR performed at 600 ⁰C and the steam-to-carbon ratio of 2 over 65 hours.

25 ENERGY STORAGE↗
DOE OSTI2024

Sources of Li isotope bias during SIMS analysis of standard glasses

The 7 Li/ 6 Li ratios in fourteen USGS, MPI-DING, and NIST glass reference materials (RMs) were analyzed by LG-SIMS to assess compositional matrix effects, evaluate RM δ 7 Li homogeneity, and calculate the useful yield of lithium in silicate glasses. The analyzed RMs cover a range of SiO 2 contents from 45.5 to 75.6% (komatiite to rhyolite), the largest compositional range yet evaluated for δ 7 Li matrix effects. We observe a matrix-induced bias (matrix effect) of up to 18‰ over the studied range that linearly correlates with SiO 2 content, demonstrating that SiO 2 content is a critical factor that must be considered when using silicate glasses to standardize for silicate samples of unknown δ 7 Li composition. All RMs were found to be sufficiently reproducible to aid in standardization of variable SiO 2 contents and appear isotopically homogeneous at the precision of our measurements. Lithium ionizes very efficiently in these RMs, with measurable yields >5% in all fused-rock RMs and >15% in low SiO 2 fused-rock RMs measured at high beam intensities. Finally, fused-rock RMs ionize lithium 2-3x more efficiently than synthetic glass RMs, which may be related to differences in major oxide chemistry and the reduced nature of the synthetic glasses relative to their fused counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗