Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sensitivity formulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Detonation performance experiments and modeling for the DAAF-based high explosive PBX 9701

Detonation performance experiments and modeling are reported for the explosive PBX 9701, which is composed of 97% 3,3$\acute{-}$diamino-4,4$\acute{-}$azoxyfurazan (DAAF) and 3% vinylidene uoride-chlorotriuoroethylene copolymer (Kel-F 800) binder by weight. PBX 9701 is a newly-developed reducedsensitivity explosive with increased performance relative to the triaminotrinitrobenzene or TATB-based PBX 9502 while still retaining low sensitivity to mechanical insult. The first detonation performance measurements for this formulation are presented, including front-curvature ratesticks and cylinder expansion test data. Prior shock initiation data is also reviewed. These data are used to develop programmed burn and reactive flow calibrations for existing commonly-used performance models which allow engineering calculations with PBX 9701. The calibration process involves several enhancements relative to conventional approaches including the use of an analytical scaling correlation to speed the calibration process and development of a new methodology to improve the consistency between the programmed burn and reactive model calibration process and the resulting calculations. Overall, PBX 9701 is seen to exhibit improved performance relative to insensitive explosives, with a trinitrotoluene (TNT) equivalence of 1.24. The detonation performance properties are found to be well captured by existing models.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
NASA NTRS1983

CAD of control systems: Application of nonlinear programming to a linear quadratic formulation

The familiar suboptimal regulator design approach is recast as a constrained optimization problem and incorporated in a Computer Aided Design (CAD) package where both design objective and constraints are quadratic cost functions. This formulation permits the separate consideration of, for example, model following errors, sensitivity measures and control energy as objectives to be minimized or limits to be observed. Efficient techniques for computing the interrelated cost functions and their gradients are utilized in conjunction with a nonlinear programming algorithm. The effectiveness of the approach and the degree of insight into the problem which it affords is illustrated in a helicopter regulation design example.

Fleming, P.↗
NASA NTRS1993

Methodology for sensitivity analysis, approximate analysis, and design optimization in CFD for multidisciplinary applications

In this study involving advanced fluid flow codes, an incremental iterative formulation (also known as the delta or correction form) together with the well-known spatially-split approximate factorization algorithm, is presented for solving the very large sparse systems of linear equations which are associated with aerodynamic sensitivity analysis. For smaller 2D problems, a direct method can be applied to solve these linear equations in either the standard or the incremental form, in which case the two are equivalent. Iterative methods are needed for larger 2D and future 3D applications, however, because direct methods require much more computer memory than is currently available. Iterative methods for solving these equations in the standard form are generally unsatisfactory due to an ill-conditioning of the coefficient matrix; this problem can be overcome when these equations are cast in the incremental form. These and other benefits are discussed. The methodology is successfully implemented and tested in 2D using an upwind, cell-centered, finite volume formulation applied to the thin-layer Navier-Stokes equations. Results are presented for two sample airfoil problems: (1) subsonic low Reynolds number laminar flow; and (2) transonic high Reynolds number turbulent flow.

Taylor, Arthur C., III↗
NASA NTRS1995

Sensitivity analysis for the dynamic response of viscoplastic shells of revolution

A computational procedure is presented for evaluating the sensitivity coefficients of the dynamic axisymmetric response of viscoplastic shells of revolution. The analytical formulation is based on Reissner's large deformation shell theory with the effects of transverse shear deformation, rotatory inertia and moments turning around the normal to the middle surface included. The material model is chosen to be isothermal viscoplasticity, and an associated flow rule is used with a von Mises effective stress. A mixed formulation is used with the fundamental unknowns consisting of six stress resultants, three generalized displacements and three velocity components. Spatial discretization is performed using finite elements, with discontinuous stress resultants across element interfaces. The temporal integration is performed by using an explicit central difference scheme (leap-frog method) with an implicit constitutive update. The sensitivity coefficients are evaluated using a direct differentiation approach. Numerical results are presented for a spherical cap subjected to step loading, and a circular plate subjected to impulsive loading. The sensitivity coefficients are generated by evaluating the derivatives of the response quantities with respect to thickness, mass density, Young's modulus, and two of the material parameters characterizing the viscoplastic response. Time histories of the response and sensitivity coefficients are presented, along with spatial distributions of these quantities at selected times.

Kulkarni, Makarand↗
NASA NTRS1992

On options for interdisciplinary analysis and design optimization

The interdisciplinary optimization of engineering systems is discussed from the standpoint of the computational alternatives available to the designer. The analysis of such systems typically requires the solution of coupled systems of nonlinear algebraic equations. The solution procedure is necessarily iterative in nature. It is shown that the system can be solved by fixed point iteration, by Newton's method, or by a combination of the two. However, the need for sensitivity analysis may affect the choice of analysis solution method. Similarly, the optimization of the system can be formulated in several ways that are discussed in the paper. It is shown that the effect of the topology of the interaction between disciplines is a key factor in the choice of analysis, sensitivity and optimization methods. Several examples are presented to illustrate the discussion.

Haftka, R. T.↗
NASA NTRS1994

Analytic Sensitivities for Shape Optimization in Equivalent Plate Structural Wing Models

Equivalent plate modeling techniques based on Ritz analysis with simple polynomials prove to be efficient tools for structural modeling of wings in the preliminary design stage. Accuracy problems are encountered, however, when these models are used to obtain finite difference behavior sensitivities with respect to planform shape. The accuracy problems are associated with the poor numerical conditioning of static and eigenvalue equations. As higher-order polynomials are being used to Improve the analysis itself, the more sensitive is the finite difference derivative to the step size used. This article describes a formulation of wing equivalent plate modeling in which it is simple to obtain analytic, explicit expressions for stiffness and mass matrix elements without the need to perform numerical integration. This formulation leads naturally to analytic expressions for the derivatives of displacements, stresses, and natural frequencies with respect to shape design variables. This article examines the accuracy of finite difference derivatives compared with the analytic derivatives, and shows that In some cases it is impossible to obtain any information of value by finite differences. Analytic sensitivities, in this case, are still sufficiently accurate for design optimization.

Livne, Eli↗
NASA NTRS1992

The sensitivity of a non-isothermal liquid bridge to residual acceleration

An examination is conducted of the steady and unsteady behavior of isothermal and nonisothermal liquid bridge systems under both normal and low-gravity conditions, recasting the full nonlinear equations in terms of a stream-function vorticity formulation in conjunction a nonorthogonal coordinate transformation. For the cases examined, the shape of the bridge is more sensitive to typical spacecraft accelerations than the buoyancy-driven flow. The effect of thermocapillary flow on the surface shape is found to be small, for the range of capillary and Reynolds numbers considered.

Alexander, J. I. D.↗
DOE OSTI2023

VIPIR: A High-Throughput Drop-Weight Impact Instrument for Imaging the Initiation and Propagation of Reactions in Energetic Materials

Characterizing the handling safety and sensitivity of explosives has been a challenging area of study for over 60 years. Historically one of the most accessible and widely utilized experiments has been the drop-weight impact test, which involves dropping a weight on a small sample sandwiched between two anvils. Because this experiment generally only utilizes sound thresholds to determine whether or not a sample reacted, the physical and chemical properties governing sensitivity remain convolved. Better understanding of chemical and material characteristics is needed to give the chemistry and engineering communities a predictive tool to determine the handling sensitivity of explosives prior to pursuing expensive and potentially hazardous synthesis and formulation operations. Here, we are developing a high throughput drop tower instrument capable of imaging the deformation and flow of energetic materials during impact and the resulting thermal ignition and propagation events. This instrument is based on previous designs but has been modified for higher throughput and tailorable modifications in the future. Herein, we present key design features that enable high-speed visible and thermal imaging of explosive initiation by sub-shock impacts, as well as preliminary results in which ignition sites were observed in an erythritol tetranitrate sample.

47 OTHER INSTRUMENTATION↗
NASA NTRS1989

Treatment of body forces in boundary element design sensitivity analysis

The inclusion of body forces has received a good deal of attention in boundary element research. The consideration of such forces is essential in the desgin of high performance components such as fan and turbine disks in a gas turbine engine. Due to their critical performance requirements, optimal shapes are often desired for these components. The boundary element method (BEM) offers the possibility of being an efficient method for such iterative analysis as shape optimization. The implicit-differentiation of the boundary integral equations is performed to obtain the sensitivity equations. The body forces are accounted for by either the particular integrals for uniform body forces or by a surface integration for non-uniform body forces. The corresponding sensitivity equations for both these cases are presented. The validity of present formulations is established through a close agreement with exact analytical results.

Saigal, Sunil↗
NASA NTRS1990

Modeling supersonic combustion using a fully-implicit numerical method

A fully-implicit finite-volume algorithm for two-dimensional axisymmetric flows has been coupled to a detailed hydrogen-air reaction mechanism (13 species and 33 reactions) so that supersonic combustion phenomena may be investigated. Numerical computations are compared with ballistic-range shadowgraphs of Lehr (1972) that exhibit two discontinuities caused by a blunt body as it passes through a premixed stoichiometric hydrogen-air mixture. The suitability of the numerical procedure for simulating these double-front flows is shown. The requirements for the physical formulation and the numerical modeling of these flowfields are discussed. Finally, the sensitivity of these external flowfields to changes in certain key reaction rate constants is examined.

Maccormack, Robert W.↗
NASA NTRS1990

Reduced size first-order subsonic and supersonic aeroelastic modeling

Various aeroelastic, aeroservoelastic, dynamic-response, and sensitivity analyses are based on a time-domain first-order (state-space) formulation of the equations of motion. The formulation of this paper is based on the minimum-state (MS) aerodynamic approximation method, which yields a low number of aerodynamic augmenting states. Modifications of the MS and the physical weighting procedures make the modeling method even more attractive. The flexibility of constraint selection is increased without increasing the approximation problem size; the accuracy of dynamic residualization of high-frequency modes is improved; and the resulting model is less sensitive to parametric changes in subsequent analyses. Applications to subsonic and supersonic cases demonstrate the generality, flexibility, accuracy, and efficiency of the method.

Karpel, Mordechay↗
NASA NTRS1988

Parameter identification and sensitivity analysis for a robotic manipulator arm

The development of a nonlinear dynamic model for large oscillations of a robotic manipulator arm about a single joint is described. Optimization routines are formulated and implemented for the identification of electrical and physical parameters from dynamic data taken from an industrial robot arm. Special attention is given to difficulties caused by the large sensitivity of the model with respect to unknown parameters. Performance of the parameter identification algorithm is improved by choosing a control input that allows actuator emf to be included in an electro-mechanical model of the manipulator system.

Brewer, D. W.↗
NASA NTRS1995

Multidisciplinary design optimization using multiobjective formulation techniques

This report addresses the development of a multidisciplinary optimization procedure using an efficient semi-analytical sensitivity analysis technique and multilevel decomposition for the design of aerospace vehicles. A semi-analytical sensitivity analysis procedure is developed for calculating computational grid sensitivities and aerodynamic design sensitivities. Accuracy and efficiency of the sensitivity analysis procedure is established through comparison of the results with those obtained using a finite difference technique. The developed sensitivity analysis technique are then used within a multidisciplinary optimization procedure for designing aerospace vehicles. The optimization problem, with the integration of aerodynamics and structures, is decomposed into two levels. Optimization is performed for improved aerodynamic performance at the first level and improved structural performance at the second level. Aerodynamic analysis is performed by solving the three-dimensional parabolized Navier Stokes equations. A nonlinear programming technique and an approximate analysis procedure are used for optimization. The proceduredeveloped is applied to design the wing of a high speed aircraft. Results obtained show significant improvements in the aircraft aerodynamic and structural performance when compared to a reference or baseline configuration. The use of the semi-analytical sensitivity technique provides significant computational savings.

Chattopadhyay, Aditi↗
NASA NTRS1993

On hydrologic similarity: A dimensionless flood frequency model using a generalized geomorphologic unit hydrograph and partial area runoff generation

One of the shortcomings of the original theory of the geomorphologic unit hydrograph (GUH) is that it assumes that runoff is generated uniformly from the entire catchment area. It is now recognized that in many catchments much of the runoff during storm events is produced on partial areas which usually form on narrow bands along the stream network. A storm response model that includes runoff generation on partial areas by both Hortonian and Dunne mechanisms was recently developed by the authors. In this paper a methodology for integrating this partial area runoff generation model with the GUH-based runoff routing model is presented; this leads to a generalized GUH. The generalized GUH and the storm response model are then used to estimate physically based flood frequency distributions. In most previous work the initial moisture state of the catchment had been assumed to be constant for all the storms. In this paper we relax this assumption and allow the initial moisture conditions to vary between storms. The resulting flood frequency distributions are cast in a scaled dimensionless framework where issues such as catchment scale and similarity can be conveniently addressed. A number of experiments are performed to study the sensitivity of the flood frequency response to some of the 'similarity' parameters identified in this formulation. The results indicate that one of the most important components of the derived flood frequency model relates to the specification of processes within the runoff generation model; specifically the inclusion of both saturation excess and Horton infiltration excess runoff production mechanisms. The dominance of these mechanisms over different return periods of the flood frequency distribution can significantly affect the distributional shape and confidence limits about the distribution. Comparisons with observed flood distributions seem to indicate that such mixed runoff production mechanisms influence flood distribution shape. The sensitivity analysis also indicated that the incorporation of basin and rainfall storm scale also greatly influences the distributional shape of the flood frequency curve.

Sivapalan, Murugesu↗
DOE OSTI2020

Superelement reduction of substructures for sequential load calculations in OpenFAST

This article presents the superelement formulation newly implemented in OpenFAST to simulate fixed-bottom substructures with a reduced-order model similar to a common industry practice. The Guyan and Craig-Bampton methods are used to reduce the number of degrees of freedom and generate a so-called "superelement". The formulation allows manufacturers to exchange such superelements to perform load calculations without revealing sensitive information about the support structure (e.g., foundation, substructure, and/or tower) or turbine. The source code is made publicly available in the OpenFAST repository. Test cases with varying degrees of complexity are presented to validate the technique, and accuracy issues are discussed.

17 WIND ENERGY↗
DOE OSTI2023

Effect of PBX Prill Size on the Compressive Properties of PBX 9502

Plastic-Bonded Explosive (PBX) prills are agglomerates a few millimeters in diameter composed of High Explosive crystals non-uniformly distributed in and surrounded by a polymer binder. When pressed at elevated temperatures at or above the binder melt temperature the polymer flows to uniformly coat the HE crystals to create a well-consolidated compaction. In reality it does so imperfectly, such that x-ray tomographic scans often look like a collection of prills mashed together. It is speculated that the larger the prill, the more non-uniform the binder distribution, but this has never been proven. Even if that were not so, the larger the prill the farther binder must flow toward the middle to homogenize during pressing. Thus, the degree of homogenization depends in part on prill size. The degree to which binder flows during pressing in turn affects the void distribution within pressed charges, which one suspects will affect shock sensitivity and material strength. In this paper we explore, for ~30 PBX 9502 formulation batches using the same TATB powder lot, how prill size effects the compressive mechanical properties.

36 MATERIALS SCIENCE↗
NASA NTRS1989

On processing development for fabrication of fiber reinforced composite, part 2

Fiber-reinforced composite laminates are used in many aerospace and automobile applications. The magnitudes and durations of the cure temperature and the cure pressure applied during the curing process have significant consequences for the performance of the finished product. The objective of this study is to exploit the potential of applying the optimization technique to the cure cycle design. Using the compression molding of a filled polyester sheet molding compound (SMC) as an example, a unified Computer Aided Design (CAD) methodology, consisting of three uncoupled modules, (i.e., optimization, analysis and sensitivity calculations), is developed to systematically generate optimal cure cycle designs. Various optimization formulations for the cure cycle design are investigated. The uniformities in the distributions of the temperature and the degree with those resulting from conventional isothermal processing conditions with pre-warmed platens. Recommendations with regards to further research in the computerization of the cure cycle design are also addressed.

Hou, Tan-Hung↗