Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SLENDER BODY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Control of the forebody vortex orientation by asymmetric air injection. Part A: Application to enhance departure/spin recovery of fighter aircraft and Part B: Details of the flow structure

A concept developed to provide powerful directional control effectiveness for a fighter aircraft at high angles of attack is described. The concept utilizes the energy concentrated in the strong forebody vortices (which form on slender bodies of high relative incidence) by controlling the lateral orientation of the vortices with respect to the body. The objective was to utilize the side force associated with asymmetric vortices, in a controlled manner, to enhance the ability of the fighter to recover from a departure from controlled flight. The results from water tunnel and wind tunnel experiments show that a small amount of tangential blowing along the forebody near the apex can effectively alter the forebody vortex system and generate large restoring yawing moments. Six degree of freedom digital simulation results show that this concept can substantially enhance recovery characteristics of fighter aircraft with long, slender forebodies. Also, the results of experiments which were conducted on a cone model are discussed where the principal test objective was to develop an understanding of the fluid mechanics involved in the process of vortex control. Knowledge gained in these more generic tests should allow the concept to be applied to a wider range of configurations.

Skow, A. M.↗
NASA NTRS1987

Subsonic wind-tunnel measurements of a slender wing-body configuration employing a vortex flap

A wind tunnel study at Mach 0.4 was conducted for a slender wing-body configuration with a leading edge vortex flap of curved planform that is deflectable about a 74 degree swept hinge line. The basic data consist of a unique combination of longitudinal aerodynamic, surface pressure, and vortex flap hinge-moment measurements on a common model. The longitudinal aerodynamic, pressure and hinge-moment data are presented without analysis in tabular format. Plots of the tabulated pressure data are also given.

Frink, Neal T.↗
NASA NTRS1957

Three-Dimensional Transonic Flow Theory Applied to Slender Wings and Bodies

The present paper re-examines the derivation of the integral equations for transonic flow around slender wings and bodies of revolution, giving special attention to conditions resulting from the presence of shock waves and to the reduction of the relations to the special forms necessary for the discussion of sonic flow, that is, flow at free-stream Mach number 1.

Heaslet, Max A↗
DOE OSTI2023

Rheology of concentrated fiber suspensions with a load-dependent friction coefficient

Here we investigate the effects of fiber aspect ratio, roughness, flexibility, and volume fraction on the rheology of concentrated suspensions in a steady shear flow using direct numerical simulations. We model the fibers as inextensible continuous flexible slender bodies with the Euler-Bernoulli beam equation governing their dynamics suspended in an incompressible Newtonian fluid. The fiber dynamics and fluid flow coupling is achieved using the immersed boundary method. In addition, the fiber surface roughness might lead to interfiber contacts, resulting in normal and tangential forces between the fibers, which follow Coulomb’s law of friction. The surface roughness is modeled as hemispherical protrusions on the fiber surfaces. Their deformation results in a normal load-dependent friction coefficient. Our simulations accurately predict the experimentally observed shear thinning in fiber suspensions. Furthermore, we find that the suspension viscosity η increases with increasing the volume fraction, roughness, fiber rigidity, and aspect ratio. The increase in η is the macroscopic manifestation of a similar increase in the microscopic contact contribution to the total stress with these parameters. In addition, we observe positive and negative first N 1 and second N 2 normal stress differences, respectively, with |N 2 | < |N 1 |, in agreement with previous experiments. Last, we propose a modified Maron-Pierce law to quantify the reduction in the jamming volume fraction by increasing the fiber aspect ratio and roughness. Our results and analysis establish the use of fiber surface tribology to tune the suspension flow behavior.

42 ENGINEERING↗
DOE OSTI2024

Evaluation of survival estimates generated from tracking downstream migrating juvenile sea lamprey ( Petromyzon marinus ) with a miniature acoustic telemetry tag

Fish that undertake juvenile migration pass through habitats that vary in mortality risk. The ability to identify regions of persistently low survival would improve fishery management. We conducted a field study combined with predictive modeling of survival in downstream migrating juvenile sea lamprey using a new micro-acoustic telemetry tag designed for implantation into small, slender-bodied fishes. Detection data were collected from eight receivers placed across a coastal riverine–wetland–lake complex. Juvenile sea lamprey initiated downstream movement near nautical twilight, stopped frequently, and were more likely to move during high river discharge. Estimated survival was highest in the riverine reach, declined through the river–wetland complex, and dropped precipitously in the drowned rivermouth lake. However, the high transmission rate and resulting short battery life of the microtransmitters (as configured) likely resulted in missed detections in the lower reaches. Simulation analyses suggested survival estimation could be improved by increasing the number of tagged lamprey and staggering release locations. We offer practical recommendations for the use of this new transmitter in field studies with small anguilliform fish.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

TEAMER: Electrically Engaged Undulation (EEL) System

The Electrically Engaged UnduLation (EEL) system is a buoyancy-driven submersible device for powering oceanographic instruments. Physically, EEL is a slender body whose flexible spine is made up of energy units interconnected by uniaxial hinges. Each unit consists of a pair of piezoelectric elements that converts the bending stress into electrical current to a battery charging circuit. An outer plastic skin forms a seal against water and allows for flexibility at hinge locations. At the top is a bluff body with electronics that holds a ballast for buoyancy adjustment. The bluff body is also responsible for creating fluid instabilities in its wake. When gliding through the water (mode 2), the spine will flex in response to the alternating vortices that shed from the head. This "lock-in" phenomenon occurs when the frequency at which vortices shed resonates with the EEL natural frequency, during which the efficient gaits were found in species of sea snake, eels, and fish. For active propulsion, a single motor can be placed at the first segment and provide the oscillatory input for propulsion similar to a dolphin's kick. Such anguilliform swimming is both efficient and nearly silent compared to a spinning propeller. Ultimately, mimicking bio-locomotion provides a viable path to a drag-reduced, self-propelled energy harvesting system for ocean monitoring.

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Modeling the Yaw Behavior of Tail Fins for Small Wind Turbines: November 22, 2021 - May 21, 2024

This report describes the aerodynamic modelling of the yaw behavior of tail fins for small wind turbines (SWTs). The analysis is based on unsteady slender body theory (USBT) and is formulated to be used with the proposed tail fin module to be added to OpenFAST. Linearized USBT, which has been applied in the past to SWT tail fins, is developed in three main ways. First, USBT is extended to high yaw angles and aspect ratios by modelling the associated nonlinear vortex dynamics and the chordwise load distribution respectively. Second, we consider the effect of time-varying wind speed. The extended theory is compared to recent unpublished measurements at the University of Perugia, Italy, for the yaw behavior of delta, elliptical, and rectangular tail fins without a rotor and nacelle. The fins were released from initial yaw angles of -40 degrees and -80 degrees ; the latter is of sufficient magnitude to show the importance of the nonlinear yaw dynamics. Further, the friction in the model tail fin bearings was measured and modelled. The constants in the aerodynamic models were taken from the literature but significant improvement in accuracy is achieved by using system identification techniques to optimize the values. This leads to the third main finding: extended USBT is accurate for all generic tail fin shapes that we considered and is, therefore, very suitable for inclusion in aeroelastic codes for SWTs. The final development is of a general nonlinear equation for yaw response that is simpler than the extended USBT and is also suitable for inclusion in OpenFAST. The two nonlinear models are used to highlight the geometric requirements for good tail fin design.

distributed wind↗
DOE OSTI2021

Shear thinning rheology in a concentrated suspension of fibers: the role of attractive interactions

Fiber-reinforced composites are ubiquitously encountered in the engineering, automobile, and aerospace industries. Fabrication of these composites requires the mixing of fibers dispersed in a liquid, and the final structure is affected by fiber properties, interactions, and flow fields. A good understanding of the rheology of fiber suspensions can aid in the design and optimization of the fabrication processes. To this end, we simulate the simple shear flow of fiber suspensions by accounting for short range lubrication, van der Waals attractive, electrostatic repulsion interactions, as well as friction between fibers. Direct numerical simulations are performed using the Immersed Boundary Method where the fibers are modeled as flexible slender bodies governed by the Euler-Bernoulli beam theory and the fluid flow is resolved using the Navier-Stokes equations. The simulation results for the suspension viscosity and yield stress are consistent with the experimental data from the literature for polyamide fiber suspensions. The shear-thinning behavior becomes stronger as we increase the magnitude of attractive interactions. Furthermore, we perform a parametric study varying fiber flexibility, volume fraction, aspect ratio, inertia and examine suspension viscosity and yield stress.

Khan, Monsurul↗
DOE OSTI2021

Multi-fidelity modeling to predict the rheological properties of fiber suspensions

Unveiling the rheological properties of fiber suspensions is of paramount interest to many industrial applications like biofuel production. The 3D numerical simulations of the suspension of fibers are often computationally expensive and time-consuming. Machine learning methods such as neural networks can simplify the prediction of rheological behavior; however, they require a relatively large training data set. Multi -fidelity models, which combine high-fidelity data from numerical simulations and less expensive lower fidelity data from resources such as simplified physical equations, can lead to optimized predictions. Here, we focus on a neural network with two levels of fidelity, i.e., high and low fidelity networks. To produce high-fidelity data, we perform direct numerical simulations to model the fibers as one-dimensional inextensible slender bodies that obey the Euler- Bernoulli beam equation. The Navier-Stokes equations govern the suspended fluid, and an immersed boundary method is used to couple the fluid and solid motion. The low-fidelity data is produced by using constitutive equations. Noticeable improvements have been observed in the accuracy of predicting the rheological behavior when a multi-fidelity network is used compared to the single-fidelity network.

Boodaghidizaji, Miad↗
NASA NTRS1972

Calculation of linearized supersonic flow over slender cones of arbitrary cross section

Supersonic linearized conical-flow theory is used to determine the flow over slender pointed cones having horizontal and vertical planes of symmetry. The geometry of the cone cross sections and surface velocities are expanded in Fourier series. The symmetry condition permits the uncoupling of lifting and nonlifting solutions. The present method reduces to Ward's theory for flow over a cone of elliptic cross section. Results are also presented for other shapes. Results by this method diverge for cross-sectional shapes where the maximum thickness is large compared with the minimum thickness. However, even for these slender-body shapes, lower order solutions are good approximations to the complete solution.

Mascitti, V. R.↗
NASA NTRS1972

Theoretical prediction of interference loading on aircraft stores. Part 1: Subsonic speeds

A method is developed for theoretically predicting the loading on pylon-mounted stores in subsonic compressible flow. Linear theory is used, without two-dimensional or slender body assumptions, to predict the flow field produced by the aircraft wing, nose, inlet, and pylons. The interference loading is integrated over the store length by considering the local crossflow, its axial and radial derivatives, and buoyancy. Store moment calculations under an F-4 aircraft at Mach 8 are compared to wind tunnel data. The method is computerized, and program user information is included.

Danfernandes, F.↗
NASA NTRS1972

Theoretical prediction of interference loading on aircraft stores. Part 2: Supersonic speeds

A method is developed for theoretically predicting the loading on pylon-mounted stores in supersonic flow. Linear theory is used, without two dimensional or slender body assumptions, to predict the flow field produced by the aircraft wing, nose, inlet, and pylons. Aircraft shock wave locations are predicted, and their effect on the flow field is included through a transformation of the aircraft geometry. The interference loading is integrated over the store length by considering the local crossflow, its axial and radial derivatives, and buoyancy. Store moment calculations under an F-4 aircraft at Mach 1.2 are compared to wind tunnel data. The method is computerized, and program user information is included.

Danfernandes, F.↗
NASA NTRS1973

Research of the sonic-boom problem

Wind tunnel tests were conducted to determine the characteristics of sonic booms. A theoretical examination of nonlinear effects in near and far flow fields, as well as sonic boom shock strength, is reported. A study of the Mach lines and bicharacteristics in three dimensional flow was pursued. The direction derivatives if the bicharacteristics were calculated in a general three dimensional flow field. A second order theory for supersonic flow past slender bodies was developed. Formulas relating flow deflections to the Whitham F-function were derived, which permitted determination of the sonic boom strength from wind tunnel measurements fairly close to the body.

Drougge, G.↗