Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SLABS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Performance Test and Validation Plan for the Neutron Slab Counter (Rev.1)

This Performance Testing and Validation Plan (PTVP) presents the technical basis for the use of the neutron slab counter (NSC) for quantitative nondestructive assay (NDA) measurements of compressor volutes from the K-25/K-27 Buildings. This PTVP prescribes a set of measurements required to calibrate and demonstrate sufficiency of the NSC for its intended purpose of quantitative NDA measurements of compressor volutes. The measurements taken according to this plan will be documented in a Performance Test and Validation Report (PTVR). Analysis of the collected data will be performed and documented in a Performance Test and Validation Evaluation. If the performance objectives are met, a commissioning report will be prepared establishing the uses and limitations of the NSC for its intended purpose.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cutting Methods for Thick Titanium-Alloy Slabs

Methods of cutting thick titanium-alloy plates and slabs are considered. The surface quality of the cut and the productivity are estimated. Abrasive cutting by means of water jets is the most universal method and yields satisfactory surface quality at moderate cost.

42 ENGINEERING↗

Response of a grounded dielectric slab to an impulse line source using leaky modes

This paper describes how expansions in leaky (or improper) modes may be used to represent the continuous spectrum in an open radiating waveguide. The technique requires a thorough knowledge of the life history of the improper modes as they migrate from improper to proper Riemann surfaces. The method is illustrated by finding the electric field resulting from an impulsively forced current located in the free space above a grounded dielectric slab.

DIELECTRIC SLABS↗

Scattering from perfectly conducting and resistive strips on a grounded dielectric slab

The scattering properties of perfectly conducting and resistive strips are predicted for strips which are located on a dielectric slab backed by a perfectly conducting ground plane. The spectral domain Green's function is used to relate the currents and fields on the strip, and the resulting integral equation is solved using the method of moments. Both TE and TM strips are examined using piecewise linear and pulse subdomain basis functions, respectively, to model the current on the strip. Calculated results are compared with results measured at the NASA Langley Research Center.

PULSE SUBDOMAIN BASIS FUNCTION↗

Building America Case Study: Simplified Air Distribution, Desuperheaters, and Sub-Slab Geothermal Heat Exchangers, Pittsburgh, Pennsylvania

This report presents a cold-climate project that examines an alternative approach to ground source heat pump (GSHP) ground loop design. The innovative ground loop design is an attempt to reduce the installed cost of the ground loop heat exchange portion of the system by containing the entire ground loop within the excavated location beneath the basement slab.

Building America↗

Building America Case Study: Simplified Air Distribution, Desuperheaters, and Sub-Slab Geothermal Heat Exchangers, Pittsburgh, Pennsylvania

This report presents a cold-climate project that examines an alternative approach to ground source heat pump (GSHP) ground loop design. The innovative ground loop design is an attempt to reduce the installed cost of the ground loop heat exchange portion of the system by containing the entire ground loop within the excavated location beneath the basement slab.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Effect of the electric field induced birefringence on the slab waveguide evanescent-wave sensor sensitivity

We have investigated the potential of using the E-field induced birefringence for improving the sensitivity of uniaxial anisotropic slab waveguide sensor based on evanescent wave interactions. LiNbO{sub 3} waveguide core was used as an example. We have calculated the sensor sensitivity formulas for the two kinds of modes propagating simultaneously in the waveguide sensor. In our study, we have distinguished between two different cases. The first case when the electric field is applied along the optic axis (+c) of the LiNbO{sub 3} wave guiding film (positive electric field); the second case when the electric field is applied opposite to the optic axis (−c) of such uniaxial crystal (negative electric field). The obtained results showed that, for positive electric field, increasing the electric field induces an increasing of the total anisotropy which causes decreasing on sensor sensitivity. However, for negative electric field, the increase of absolute values of negative electric field induces a decrease of the total anisotropy, the latter increases the sensor sensitivity. On the other hand, the study of the physical parameters on the sensor sensitivity showed that, to maximize the sensor sensitivity, it is advisable to use isotropic substrate that has a refractive index as closer as possible to the measurand index.

42 ENGINEERING↗

Stress due to electric charge density distribution in a dielectric slab

The spatial distribution of electric field due to an imposed electric charge density profile in an infinite slab of dielectric material is derived analytically by integrating Gauss’s law. Various charge density distributions are considered, including exponential and power-law forms. Here, the Maxwell stress tensor is used to compute a notional static stress in the material due to the charge density and its electric field. Characteristics of the electric field and stress distributions are computed for example cases in polyethylene, showing that field magnitudes exceeding the dielectric strength would be required in order to achieve a stress exceeding the ultimate tensile strength.

42 ENGINEERING↗

Direct simulation of extinction in a slab of spherical particles

The project resulted in 3 journal articles. Metadata represents the first of the articles. Direct simulation of extinction in a slab of spherical particles Journal of Quantitative Spectroscopy and Radiative Transfer, Volume 123, July 2013, Pages 103-112 D.W. Mackowski, M.I. Mishchenko A general superposition solution for electromagnetic scattering by multiple spherical domains of optically active media Journal of Quantitative Spectroscopy and Radiative Transfer, Volume 133, January 2014, Pages 264-270 D.W. Mackowski A T matrix method based upon scalar basis functions Journal of Quantitative Spectroscopy and Radiative Transfer, Volume 123, July 2013, Pages 113-121 D.W. Mackowski, F.M. Kahnert, M.I. Mishchenko

Mackowski, D. W.↗

Single-shot on-chip spectral sensors based on photonic crystal slabs

Miniaturized spectrometers have significant potential for portable applications such as consumer electronics, health care, and manufacturing. These applications demand low cost and high spectral resolution, and are best enabled by single-shot free-space-coupled spectrometers that also have sufficient spatial resolution. Here, we demonstrate an on-chip spectrometer that can satisfy all of these requirements. Our device uses arrays of photodetectors, each of which has a unique responsivity with rich spectral features. These responsivities are created by complex optical interference in photonic-crystal slabs positioned immediately on top of the photodetector pixels. The spectrometer is completely complementary metal–oxide–semiconductor (CMOS) compatible and can be mass produced at low cost.

42 ENGINEERING↗

Nonlinearity of the post-spinel transition and its expression in slabs and plumes worldwide

Phase transitions in the mantle control its internal dynamics and structure. The post-spinel transition marks the upper–lower mantle boundary, where ringwoodite dissociates into bridgmanite plus ferropericlase, and its Clapeyron slope regulates mantle flow across it. This interaction has previously been assumed to have no lateral spatial variations, based on the assumption of a linear post-spinel boundary in pressure and temperature. Here we present laser-heated diamond anvil cell experiments with synchrotron X-ray diffraction to better constrain this boundary, especially at higher temperatures. Combining our data with results from the literature, and using a global analysis based on machine learning, we find a pronounced nonlinearity in the post-spinel boundary, with its slope ranging from –4 MPa/K at 2100 K, to –2 MPa/K at 1950 K, and to 0 MPa/K at 1600 K. Changes in temperature over time and space can therefore cause the post-spinel transition to have variable effects on mantle convection and the movement of subducting slabs and upwelling plumes.

58 GEOSCIENCES↗

Ion temperature gradient driven instability in high beta plasmas of a sheared slab

A set of simplified integral eigenmode equations with neglecting of the magnetic gradient drift effects are derived and employed to investigate the ion temperature gradient modes in plasmas of sheared slab geometry. Perturbations of both perpendicular and parallel components of magnetic vector potential are considered, as well as the perturbation of the electrostatic potential. The characteristics of the ion temperature gradient instability are studied with the equations and the corresponding computer code, and compared with those with the drift effects included. The results show that the magnetic gradient drift has a block effect on ion temperature gradient mode stabilization, and the perpendicular component of the perturbed magnetic vector potential has strong stabilizing effects on ion temperature gradient modes. Nevertheless, the results from the simplified equations are qualitatively in agreement with those from the complete equations and the differences between them are not significant quantitatively. The simplified equations have the advantages of saving computer time and being well suited to analytic methods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗