Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Low-spin Fe[superscript 2+] in silicate perovskite and a possible layer at the base of the lower mantle

We investigated the spin state of iron in Mg{sub 0.82}Fe{sub 0.18}SiO{sub 3} silicate perovskite using Moessbauer spectroscopy and nuclear forward scattering (NFS) at pressures up to 130 GPa and temperatures up to 1000 K. Majorite starting material was loaded into diamond anvil cells in three separate experiments, and transformed to silicate perovskite through laser heating. We found, in agreement with previous work, the predominance of a component with high isomer shift ({approx}1 mm/s relative to {alpha}-Fe) and high-quadrupole splitting (QS) (>4 mm/s) in Moessbauer and NFS spectra up to 115 GPa at room temperature, and in accordance with previous work this component was assigned to intermediate-spin Fe{sup 2+}. At higher pressures, the intensity of the high QS component in the silicate perovskite spectrum decreased, while the intensity of a new component with low isomer shift ({approx}0 mm/s relative to {alpha}-Fe) and low quadrupole splitting (<0.5 mm/s) increased. This new component was assigned to low-spin Fe{sup 2+}, and its intensity increased with both increasing pressure and increasing temperature: at 120 GPa and 1000 K all Fe{sup 2+} was in the low-spin state. X-ray diffraction data showed well crystallized perovskite in all runs, and although the stable phase above 110 GPa is expected to be post-perovskite, sluggish transition kinetics likely preserved the perovskite phase in a metastable state. Our results combined with data in the literature and thermodynamic and topological considerations suggest that there may be a region where silicate perovskite containing low-spin Fe{sup 2+} is stable, which coincides with predicted pressure-temperature conditions near the D{double_prime} layer.

36 MATERIALS SCIENCE↗

Initial hydration process of calcium silicates in Portland cement: A comprehensive comparison from molecular dynamics simulations

As the main components of Portland cement, calcium silicates show substantial differences in their hydration reactivity which have not been fully explained. A comprehensive comparison of the initial hydration process of calcium silicates, namely dicalcium silicate (C{sub 2}S) and tricalcium silicate (C{sub 3}S), was conducted using molecular dynamics simulations. The initial hydration process was divided into three stages using cut-off times of 0.001 ns and 3 ns. The hydration of M{sub 3}-C{sub 3}S (010) was more evident than that of β-C{sub 2}S (100), supported by the hydroxylation degree, radial distribution function, atomic density profile, etc. The coordination number of the surface Ca atoms might be the underlying reason for such a difference. Interactions between cement surfaces and water molecules were mainly characterised by solid OH bonding and Ca-water O bonding. Dissolution of Ca atoms was observed, although quite scarce, while no dissolution of Si atoms was observed.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of new rare earth silicate fluorides: A novel class of polar materials

Polar crystals provide an interesting avenue for materials research both in the structures they form and the properties they possess. This work describes the hydrothermal synthesis and structural characterization of three novel silicate fluorides. Compound (1), LiY{sub 3}(SiO{sub 4}){sub 2}F{sub 2} crystallizes in space group C2/c, with a=17.651(4) A, b=4.8868(10) A, c=11.625(2) A and {beta}=131.13(3) Degree-Sign . BaY{sub 2}(Si{sub 2}O{sub 7})F{sub 2} (2) crystallizes in space group P-1, with a=5.1576(10) A, b=6.8389(14) A, c=11.786(2) A, {alpha}=93.02(3) Degree-Sign , {beta}=102.05(3) Degree-Sign and {gamma}=111.55(3) Degree-Sign . Finally, the structure of Ba{sub 2}Y{sub 3}(SiO{sub 4}){sub 2}F{sub 5} (3) was determined in the polar orthorhombic space group Pba2, having unit cell parameters a=8.8864(18) A, b=12.764(3) A and c=5.0843(10) A. The structures are compared based on their building blocks and long range polarities. Aligned silicate tetrahedra segregated into a single layer in (3) impart the observed polarity. - Graphical abstract: The polar structure of Ba{sub 2}Y{sub 3}(SiO{sub 4}){sub 2}F{sub 5}. Highlights: Black-Right-Pointing-Pointer Natural yttrium silicate fluoride minerals are briefly reviewed. Black-Right-Pointing-Pointer The synthesis and structures of LiY{sub 3}(SiO{sub 4}){sub 2}F{sub 2}, BaY{sub 2}(Si{sub 2}O{sub 7})F{sub 2} and Ba{sub 2}Y{sub 3}(SiO{sub 4}){sub 2}F{sub 5} are discussed. Black-Right-Pointing-Pointer Ba{sub 2}Y{sub 3}(SiO{sub 4}){sub 2}F{sub 5} crystallizes in the polar space group Pba2. Black-Right-Pointing-Pointer Polarity occurs primarily through aligned silicate tetrahedra in a segregated layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new naturally-occurring nanoporous copper sheet–silicate with 6{sup 4}8{sup 2} cages related to synthetic “CuSH” phases

The structure of a new naturally-occurring nanoporous copper silicate of formula Na{sub 2}CaCu{sub 2}Si{sub 8}O{sub 20}·H{sub 2}O (disodium calcium dicopper octasilicate monohydrate) is reported and its relations to synthetic nanoporous “CuSH” compounds are discussed. The new phase is monoclinic C2/m with unit cell parameters a=12.2439(6) Å, b=15.7514(4) Å, c=10.6008(3) Å, β=125.623(2)°, and V=1661.87(10) Å{sup 3} (Z=4). The structure has been refined to R{sub 1}(all)=0.033, wR{sub 2}(all)=0.071, and GoF=1.090. In the double-sheet of SiO{sub 4} tetrahedra, 6{sup 4}8{sup 2} cages connect to form a chequer-board motif within which Na atoms and H{sub 2}O groups occupy channels. Each cage is occupied by 7-coordinated Na atom lying in a mirror plane. An intra-sheet corridor between the 6{sup 4}8{sup 2} cages is occupied by Na in 8-fold cuboidal coordination. The silicate skeleton is highly porous, with obvious channels and pathways for ion migration. The interlayer between double-sheets is occupied by CaO{sub 8}, CuO{sub 5} and NaO{sub 5}(H{sub 2}O) polyhedra. CuO{sub 5} polyhedra occur as rows of edge-sharing Cu{sub 2}O{sub 9} pairs connected by NaO{sub 5}(H{sub 2}O) octahedra and CaO{sub 8} square antiprisms. Both CuO{sub 5} and NaO{sub 5}(H{sub 2}O) polyhedra are features shared with closely-related synthetic “CuSH” phases of interest to the solid-state chemistry community as potential nanoporous catalysts. However, Na{sub 2}CaCu{sub 2}Si{sub 8}O{sub 20}·H{sub 2}O is the only natural representative of this group of structures, and the only one to contain essential Ca. The discovery of Na{sub 2}CaCu{sub 2}Si{sub 8}O{sub 20}·H{sub 2}O points to a new group of CuSH-type phases containing alkaline-earth elements. Its close natural association and structural affinity with wesselsite SrCuSi{sub 4}O{sub 10} suggest the possibility of transformation between CuSH and gillespite-type phases, and thereby a route to synthesising alkaline-earth CuSH derivatives, so widening their potential as nanoporous catalysts. - Graphical abstract: Projection onto (010) of the structure of the natural nanoporous sheet silicate Na{sub 2}CaCu{sub 2}Si{sub 8}O{sub 20}·H{sub 2}O showing the double sheet of corner-linked SiO{sub 4} tetrahedra, intralayer Na and interlayer Na, Ca Cu and H{sub 2}O. Small green sphere Cu, large blue spheres Ca, orange purple and yellow small spheres Na, large grey sphere H{sub 2}O molecules. Bonds from inter/intralayer species to sheets have been omitted for clarity. - Highlights: • A new naturally-occurring nanoporous Cu sheet–silicate containing 6{sup 4}8{sup 2} cages. • A bridge between synthetic nanoporous CuSH phases and gillespite-type.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compositional investigation of ∼2 μm luminescence of Ho{sup 3+}-doped lead silicate glass

Graphical abstract: Ho{sup 3+}-doped lead silicate glass with lowest maximum phonon energy possesses highest ∼2 μm luminescence intensity. - Highlights: • With increment of lead oxide, maximum phonon energy in lead silicate glass decreased. • ∼2 μm luminescent intensity of Ho{sup 3+} increased with increment of lead oxide. • Lowest lead oxide content glass possesses highest quantum efficiency due to low maximum phonon energy. - Abstract: Lead silicate glass samples with varying lead oxide content were prepared in this study, and their luminescent properties were examined and analyzed. It was found that with increasing lead oxide content, the maximum phonon energies of the glass samples decreased, while their spontaneous transition probabilities first increased and then decreased. The influence of the spontaneous transition rate, A{sub 10}, and the multi-phonon relaxation rate, W{sub 10}, on the sample luminescent properties was analyzed using rate equations. As a result, it was found that with increasing lead oxide content, W{sub 10}/A{sub 10} decreased, while the quantum efficiency increased. Thus, the luminescent intensity at ∼2 μm increased in the glass samples with increased lead oxide content. The high luminescent intensity and long lifetime indicate that silicate glasses containing high levels of lead oxide could potentially be used in ∼2 μm lasers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical and structural investigation of the role of both Mn and Mn oxide in the formation of manganese silicate barrier layers on SiO{sub 2}

In this study, Mn silicate (MnSiO{sub 3}) barrier layers were formed on thermally grown SiO{sub 2} using both metallic Mn and oxidized Mn films, in order to investigate the role of oxygen in determining the extent of the interaction between the deposited Mn and the SiO{sub 2} substrate. Using x-ray photoelectron spectroscopy, it has been shown that a metallic Mn film with an approximate thickness of 1 nm cannot be fully converted to Mn silicate following vacuum annealing to 500 deg. C. Transmission electron microscopy (TEM) analysis suggests the maximum MnSiO{sub 3} layer thickness obtainable using metallic Mn is {approx}1.7 nm. In contrast, a {approx}1 nm partially oxidized Mn film can be fully converted to Mn silicate following thermal annealing to 400 deg. C, forming a MnSiO{sub 3} layer with a measured thickness of 2.6 nm. TEM analysis also clearly shows that MnSiO{sub 3} growth results in a corresponding reduction in the SiO{sub 2} layer thickness. It has also been shown that a fully oxidized Mn oxide thin film can be converted to Mn silicate, in the absence of metallic Mn. Based on these results it is suggested that the presence of Mn oxide species at the Mn/SiO{sub 2} interface facilitates the conversion of SiO{sub 2} to MnSiO{sub 3}, in agreement with previously published studies.

36 MATERIALS SCIENCE↗

DIRECT LABORATORY ANALYSIS OF SILICATE STARDUST FROM RED GIANT STARS

We performed combined focused ion beam/transmission electron microscopy studies to investigate the chemistry and structure of eight presolar silicate grains that were previously detected by NanoSIMS oxygen isotope mapping of the carbonaceous chondrite Acfer 094. The analyzed presolar silicates belong to the O isotope Groups I/II ({sup 17}O-enriched and {sup 18}O-depleted) and therefore come from 1-2.5 M{sub sun} asymptotic giant branch stars of close-to-solar or slightly lower-than-solar metallicity. Three grains are amorphous, Mg-rich, and show a variable, but more pyroxene-like composition. Most probably, these grains have formed under circumstellar low-temperature conditions below the crystallization temperature. Three grains are Fe-bearing glasses similar to the 'glass with embedded metal and sulfides' (GEMS) grains found in interplanetary dust particles. However, two of the meteorite GEMS grains from this study lack comparatively large ({approx}>20 nm) Fe-rich inclusions and have sulfur contents <1 at.%, which is different than observed for the majority of GEMS grains. These grains likely condensed under strong non-equilibrium conditions from an Si-enriched gas. One olivine is characterized by a crystalline core and an amorphous, more Fe-rich rim, which is probably the result of interstellar medium sputtering combined with Mg removal. The detection of another olivine with a relatively high Fe content (Mg no. 0.9) shows that circumstellar crystalline silicates are more Fe-rich than astrophysical models usually suggest. The overall predominance of olivine among the crystalline silicate stardust population compared to pyroxene indicates preferential formation or survival of this type of mineral. As pyroxene is indeed detected in circumstellar outflows, it remains to be seen how this result is compatible with astrophysical observations and experimental data.

99 GENERAL AND MISCELLANEOUS↗

SILICATE EVOLUTION IN BROWN DWARF DISKS

We present a compositional analysis of the 10 {mu}m silicate spectra for brown dwarf disks in the Taurus and Upper Scorpius (UppSco) star-forming regions, using archival Spitzer/Infrared Spectrograph observations. A variety in the silicate features is observed, ranging from a narrow profile with a peak at 9.8 {mu}m, to nearly flat, low-contrast features. For most objects, we find nearly equal fractions for the large-grain and crystalline mass fractions, indicating both processes to be active in these disks. The median crystalline mass fraction for the Taurus brown dwarfs is found to be 20%, a factor of {approx}2 higher than the median reported for the higher mass stars in Taurus. The large-grain mass fractions are found to increase with an increasing strength in the X-ray emission, while the opposite trend is observed for the crystalline mass fractions. A small 5% of the Taurus brown dwarfs are still found to be dominated by pristine interstellar medium-like dust, with an amorphous submicron grain mass fraction of {approx}87%. For 15% of the objects, we find a negligible large-grain mass fraction, but a >60% small amorphous silicate fraction. These may be the cases where substantial grain growth and dust sedimentation have occurred in the disks, resulting in a high fraction of amorphous submicron grains in the disk surface. Among the UppSco brown dwarfs, only usd161939 has a signal-to-noise ratio high enough to properly model its silicate spectrum. We find a 74% small amorphous grain and a {approx}26% crystalline mass fraction for this object.

99 GENERAL AND MISCELLANEOUS↗

CRYSTALLINE SILICATES IN EVOLVED STARS. I. SPITZER/INFRARED SPECTROGRAPH SPECTROSCOPY OF IRAS 16456-3542, 18354-0638, AND 23239+5754

We report the Spitzer Infrared Spectrograph (IRS) observations of three evolved stars: IRAS 16456-3542, 18354-0638, and 23239+5754. The 9.9-37.2 {mu}m Spitzer/IRS high-resolution spectra of these three sources exhibit rich sets of enstatite-dominated crystalline silicate emission features. IRAS 16456-3542 is extremely rich in crystalline silicates, with >90% of its silicate mass in crystalline form, the highest to date ever reported for crystalline silicate sources.

79 ASTRONOMY AND ASTROPHYSICS↗

PETROLOGIC CONSTRAINTS ON AMORPHOUS AND CRYSTALLINE MAGNESIUM SILICATES: DUST FORMATION AND EVOLUTION IN SELECTED HERBIG Ae/Be SYSTEMS

The Infrared Space Observatory, Spitzer Space Telescope, and Herschel Space Observatory surveys provided a wealth of data on the Mg-silicate minerals (forsterite, enstatite), silica, and ''amorphous silicates with olivine and pyroxene stoichiometry'' around Herbig Ae/Be stars. These incredible findings do not resonate with the mainstream Earth Sciences because of (1) disconnecting ''astronomical nomenclature'' and the long existing mineralogical and petrologic terminology of minerals and amorphous materials, and (2) the fact that Earth scientists (formerly geologists) are bound by the ''Principle of Actualism'' that was put forward by James Hutton (1726-1797). This principle takes a process-oriented approach to understanding mineral and rock formation and evolution. This paper will (1) review and summarize the results of laboratory-based vapor phase condensation and thermal annealing experiments, (2) present the pathways of magnesiosilica condensates to Mg-silicate mineral (forsterite, enstatite) formation and processing, and (3) present mineralogical and petrologic implications of the properties and compositions of the infrared-observed crystalline and amorphous dust for the state of circumstellar disk evolution. That is, the IR-observation of smectite layer silicates in HD142527 suggests the break-up of asteroid-like parent bodies that had experienced aqueous alteration. We discuss the persistence of amorphous dust around some young stars and an ultrafast amorphous to crystalline dust transition in HD 163296 that leads to forsterite grains with numerous silica inclusions. These dust evolution processes to form forsterite, enstatite {+-} tridymite could occur due to amorphous magnesiosilica dust precursors with a serpentine- or smectite-dehydroxylate composition.

79 ASTRONOMY AND ASTROPHYSICS↗

The formation of molecular hydrogen on silicate dust analogs: The rotational distribution

Our laboratory experiments continue to explore how the formation of molecular hydrogen is influenced by dust and how dust thereby affects hydrogen molecules adsorbed on its surface. In Sabri et al., we present the preparation of nanometer-sized silicate grain analogs via laser ablation. These analogs illustrate extremes in structure (fully crystalline or fully amorphous grains), and stoichiometry (the forsterite and fayalite end-members of the olivine family). These were inserted in FORMOLISM, an ultra-high vacuum setup where they can be cooled down to ∼5 K. Atomic beams are directed at these surfaces and the formation of new molecules is studied via REMPI(2+1) spectroscopy. We explored the rotational distribution (0 ≤ J'' ≤ 5) of v'' = 0 of the ground electronic state of H{sub 2}. The results of these measurements are reported here. Surprisingly, molecules formed and ejected from crystalline silicates have a cold (T {sub rot} ∼ 120 K) rotational energy distribution, while for molecules formed on and ejected from amorphous silicate films, the rotational temperature is ∼310 K. These results are compared to previous experiments on metallic surfaces and theoretical simulations. Solid-state surface analysis suggests that flatter grains could hinder the 'cartwheel' rotation mode. A search for hot hydrogen, predicted as a result of H{sub 2} formation, hints at its production. For the first time, the rotational distribution of hydrogen molecules formed on silicate dust is reported. These results are essential to understanding the chemistry of astrophysical media containing bare dust grains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Searching for correlations between vibrational spectral features and structural parameters of silicate glass network

Infrared (IR) and Raman spectroscopic features of silicate glasses are usually interpreted based on the analogy with those of smaller molecules, molecular clusters, or crystalline counterparts; this study tests the accuracy and validity of these widely cited peak assignment schemes by comparing vibrational spectral features with bond parameters of the glass network created by molecular dynamics (MD) simulations. A series of sodium silicate glasses with compositions of [Na 2 O] x [Al 2 O 3 ] 2 [SiO 2 ] 98- x with x = 7, 12, 17, and 22 were synthesized and analyzed with IR and Raman. A silica glass substrate and a crystalline quartz were also analyzed for comparison. Glass structures with the same compositions were generated with MD simulations using three types of potentials: fixed partial charge pairwise (Teter), partial diffuse charge potential (MGFF), and bond order-based charge transfer potential (ReaxFF). The comparison of simulated and experimental IR spectra showed that, among these three potentials tested, ReaxFF reproduces the concentration dependence of spectral features closest to the experimentally observed trend. Hence, the bond length and angle distributions as well as Si– Q n species and ring size distributions of silica and sodium silicate glasses were obtained from ReaxFF-MD simulations and further compared with the peak assignment or deconvolution schemes—which have been widely used since 1970s and 1980s—(a) correlation between the IR peak position in the Si–O stretch region (1050-1120 cm -1 ) and the Si–O–Si bond angle; (b) deconvolution of the Raman bands in the Si–O stretch region with the Q n speciation; and (c) assignment of the Raman bands in the 420-600 cm -1 region to the bending modes of (SiO) n rings with different sizes (typically, n = 3-6). The comparisons showed that none of these widely used methods is congruent with the bond parameters or structures of silicate glass networks produced via ReaxFF-MD simulations. This result invokes that the adequacy of these spectral interpretation methods must be questioned. Alternative interpretations are proposed, which are to be tested independently in future studies.

36 MATERIALS SCIENCE↗

In Situ Soft X-ray Spectromicroscopy of Early Tricalcium Silicate Hydration

The understanding and control of early hydration of tricalcium silicate (C3S) is of great importance to cement science and concrete technology. However, traditional characterization methods are incapable of providing morphological and spectroscopic information about in situ hydration at the nanoscale. Using soft X-ray spectromicroscopy, we report the changes in morphology and molecular structure of C3S at an early stage of hydration. In situ C3S hydration in a wet cell, beginning with induction (~1 h) and acceleration (~4 h) periods of up to ~8 h, was studied and compared with ex situ measurements in the deceleration period after 15 h of curing. Analysis of the near-edge X-ray absorption fine structure showed that the Ca binding energy and energy splitting of C3S changed rapidly in the early age of hydration and exhibited values similar to calcium silicate hydrate (C–S–H). The formation of C–S–H nanoseeds in the C3S solution and the development of a fibrillar C–S–H morphology on the C3S surface were visualized. Following this, silicate polymerization accompanied by C–S–H precipitation produced chemical shifts in the peaks of the main Si K edge and in multiple scattering. However, the silicate polymerization process did not significantly affect the Ca binding energy of C–S–H.

36 MATERIALS SCIENCE↗

Spinning dust emission from ultra-small silicates: emissivity and polarization spectrum

Anomalous microwave emission (AME) is an important Galactic foreground of cosmic microwave background radiation. It is believed that AME arises from rotational emission by spinning polycyclic aromatic hydrocarbons in the interstellar medium (ISM). In this paper, we suppose that a new population of ultra-small silicate grains perhaps exists in the ISM, and quantify the rotational emissivity from these tiny particles and its polarization spectrum. We find that spinning silicate nanoparticles can produce strong rotational emission when the tiny grains follow a log-normal size distribution. The polarization fraction of spinning dust emission from tiny silicates increases with decreasing dipole moment per atom (β) and can reach P∼20% for β∼0.1 D at a grain temperature of 60 K. We identify a parameter space (β,Y{sub Si}), with Y{sub Si} being the fraction of Si abundance in nanoparticles, in which its rotational emission can adequately reproduce both the observed AME and the polarization of the AME, without violating the observational constraints of ultraviolet extinction and polarization of starlight. Our results reveal that rotational emission from spinning silicate may be an important source of AME.

79 ASTRONOMY AND ASTROPHYSICS↗

Mid-infrared Extinction and Fresh Silicate Dust Toward the Galactic Center

We interpret the interstellar extinction observed toward the Galactic center (GC) in the wavelength range λ = 1–20 μm. Its main feature is the flat extinction at 3–8 μm whose explanation is still a problem for cosmic dust models. We search for the structure and chemical composition of dust grains that could explain the observed extinction. In contrast to earlier works, we use laboratory measured optical constants and consider particles of different structures. We show that a mixture of compact grains of aromatic carbon and of some silicate is better suited for reproducing the flat extinction in comparison with essentially porous grains or aliphatic carbon particles. Metallic iron should be located inside the particle, i.e., it cannot form layers on silicate grains as the extinction curves then become very peculiar. We find a model including aromatic carbonaceous particles and three-layered particles with an olivine-type silicate core, a thin, very porous layer and a thin envelope of magnetite that provides a good (but still not perfect) fit to the observational data. We suggest that such silicate dust should be fresh, i.e., recently formed in the atmospheres of late-type stars in the central region of the Galaxy. We assume that this region has a radius of about 1 kpc and produces about half of the observed extinction. The remaining part of extinction is caused by a “foreground” material being practically transparent at λ=4--8 μm.

79 ASTRONOMY AND ASTROPHYSICS↗

Theoretical studies of the infrared emission from circumstellar dust shells: the infrared characteristics of circumstellar silicates and the mass-loss rate of oxygen-rich late-type giants

We have modeled the infrared emission of spherically symmetric, circumstellar dust shells with the aim of deriving the infrared absorption properties of circumstellar silicate grains and the mass-loss rates of the central stars. As a basis for our numerical studies, a simple semianalytical formula has been derived that illustrates the essential characteristics of the infrared emission of such dust shells. A numerical radiative transfer program has been developed and applied to dust shells around oxygen-rich late-type giants. Free parameters in such models include the absorption properties and density distribution of the dust. An approximate, analytical expression is derived for the density distribution of circumstellar dust driven outward by radiation pressure from a central source. A large grid of models has been calculated to study the influence of the free parameters on the emergent spectrum. These results form the basis for a comparison with near-infrared observations. Observational studies have revealed a correlation between the near-infrared color temperature, Tc, and the strength of the 10 micrometers emission or absorption feature, A10. This relationship, which essentially measures the near-infrared optical depth in terms of the 10 micrometers optical depth, is discussed. Theoretical A10-Tc relations have been calculated and compared to the observations. The results show that this relation is a sensitive way to determine the ratio of the near-infrared to 10 micrometers absorption efficiency of circumstellar silicates. These results as well as previous studies show that the near-infrared absorption efficiency of circumstellar silicate grains is much higher than expected from terrestrial minerals. We suggest that this enhanced absorption is due to the presence of ferrous iron (Fe2+) color centers dissolved in the circumstellar silicates. By using the derived value for the ratio of the near-infrared to 10 micrometers absorption efficiency, the observed A10-Tc relation can be calibrated in terms of the total dust column density of the circumstellar shell and thus the mass-loss rate of late-type giants can easily be derived. Detailed models have been made of the infrared emission of three well-studied Miras: R Cas, IRC 10011, and OH 26.5+0.6, with the emphasis on the shape of the 10 micrometers emission or absorption feature. The results show that the intrinsic shape of the 10 micrometers resonance varies from a very broad feature in R Cas to a relatively narrower feature in OH 26.5+0.6, with IRC 10011 somewhere in between. Possible origins of this variation are discussed. The mass-loss rates from these objects are calculated to be 3 x 10(-7), 2 x 10(-5), and 2 x 10(-4) M Sun yr-1 for R Cas, IRC 10011, and OH 26.5+0.6, respectively. These results are compared to other determinations in the literature.

NASA Discipline Exobiology↗

Broadening the Scope for Fluoride‐Free Synthesis of Siliceous Zeolites

Abstract Siliceous zeolites are ideally suited for emerging applications in gas separations, sensors, and the next generation of low‐ k dielectric materials, but the use of fluoride in the synthesis significantly hinders their commercialization. Herein, we show that the dry gel conversion (DGC) technique can overcome this problem. Fluoride‐free synthesis of two siliceous zeolites—AMH‐4 (CHA‐type) and AMH‐5 (STT‐type), has been achieved for the first time using the method. Siliceous *BEA‐, MFI‐, and *MRE‐type zeolites have also been synthesized to obtain insights into the crystallization process. Charge‐balancing interactions between the inorganic cation, organic structure‐directing agent (OSDA), and Si−O − defects are found to be an essential aspect. We quantify this factor in terms of the “OSDA charge/silica ratio” of the as‐made zeolites and demonstrate that the DGC technique is broadly applicable and opens up new avenues for fluoride‐free siliceous zeolite synthesis.

Vattipalli, Vivek↗

Deciphering the non-linear impact of Al on chemical durability of silicate glass

The role of Al in aluminosilicate glasses remains somewhat a mystery: at low concentrations, it increases the resistance to hydrolysis of the glass, whereas at high concentrations an opposite effect is observed. To understand the origin of the phenomenon on a fundamental atomistic scale, we performed 577 MD simulations and applied potential mean force (PMF) calculations to estimate the activation barriers for hydrolysis and to statistically correlate them with local structural features of the glass. Models of pure silicate and aluminosilicate glasses are constructed and investigated. PMF simulation results are further validated by the experimental measurements and revealed that Al is very easy to dissociate, but it also increases the glass chemical durability through significantly increasing both the strength of Si and network connectivity of the glass. In contrast, at high Al concentration, preferential dissolution of Al weakens the silicate network, which it supposes to strengthen, and so the glass resistance becomes poor. Through PMF calculations, we evaluated the activation barriers for dissociating bonds around Al as 0.49 eV, which is less than a half of the energy to dissociate bonds around Si in pure silicate (1.22 eV) and around Si in aluminosilicate glass (1.34 eV), all these energy differences being statistically significant. Molecular structural level investigation revealed that Si with Al as a second neighbor in the glass network has a significantly higher activation energy for dissociation than Si in pure silicate glass. Furthermore, the proposed approach opens the way to the development of quantitative predictive models of glass durability.

36 MATERIALS SCIENCE↗