The behavior of iodine in stabilized granular activated carbon and silver mordenite in cementitious
Explore the source record for details and available documents.
Yamagata, Alessandra Fujii↗
SEARCH · Engineering Papers
Results for “Reprocessing”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Quantifying fission gas adsorption onto natural clinoptilolite in the presence of environmental air and water
Adsorption of noble gas fission products onto naturally occurring minerals is of interest for its potential to retain or retard emissions from nuclear fuel reprocessing operations or underground nuclear explosions. However, experimental studies of trace noble gas adsorption in the presence of air and water have largely focused on synthetic materials, such as activated carbon or metal-organic frameworks. Here, in this study, adsorption of Kr and Xe onto the naturally occurring zeolitic mineral clinoptilolite is studied in the presence of nitrogen and water. By varying the composition of the gas phase and monitoring the change in the combined adsorbate mass, the adsorbed concentration of noble gas is calculated gravimetrically. For dry clinoptilolite, the concentration of adsorbed Kr and Xe is linearly correlated with noble gas pressure and Henry's Law appears satisfactory, despite the presence of nitrogen at atmospheric pressures. However, the presence of water significantly reduces the adsorbed concentration of both Kr and Xe, which is typical in nanoporous sorbents. Here, an empirical bivariate model is presented, combining the Henry's Law adsorption model for a dry adsorbent with the exponential reduction in the presence of water, as reported by Lungu and Underhill in 1999. This model provides a means to estimate the adsorbate concentration at the trace partial pressures and higher water contents relevant to field-scale modeling of fission gas transport through the vadose zone.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Reductive removal of pertechnetate and chromate by zero valent iron under variable ionic strength conditions
Radioactive technetium-99 (Tc) present in waste streams and subsurface plumes at legacy nuclear reprocessing sites worldwide poses potential risks to human health and the environment. This research comparatively evaluated efficiency of zero valent iron (ZVI) toward reductive removal of Tc(VII) in presence of Cr(VI) from NaCl and Na 2 SO 4 electrolyte solutions under aerobic conditions. In both electrolytes, anticorrosive Cr(VI) suppressed oxidation of ZVI at elevated concentrations resulting in the delay of initiation of Tc(VII) reduction to Tc(IV)). In the absence of Cr(VI), no such delay was observed in the analogous systems. At low ionic strength, retarded ZVI oxidation inhibited Tc(VII) reduction in part due to the competing thermodynamically more favorable reduction of Cr(VI) to Cr(III); this effect was particularly pronounced in the chloride medium at the ionic strength ? 0.1. Higher ionic strength favored reduction of both Tc(VII) and Cr(VI), which followed a second-order reaction rate in both electrolytes attributed to the more efficient iron oxidation as evident from x-ray diffraction and electron microscopy measurements. Magnetite was the primary iron oxide phase, and its higher fraction in the SO 4 2- solutions facilitated reductive removal of Tc(VII) and Cr(VI). In the Cl- matrix, Cr(VI) promoted further oxidation of magnetite as well as formation of chromite diminishing overall reductive capacity of this system and resulting in less effective removal of Tc(VII) compared to the SO 4 2- solutions.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Effects of composition and canister centerline cooling on microstructure, phase distribution, and chemical durability of dehalogenated iron phosphate waste forms
This paper discusses the effects of composition and canister centerline cooling (CCC) on the microstructures, phase distribution, and chemical durability of dehalogenated iron phosphate waste forms starting from chloride-based salt simulants including KCl (Simple-1), NdCl3 (Simple-2), SrCl2 (Simple-3), LaCl3 (Simple-4), LiCl (Simple-5), CsCl (Simple-6), as well as a complex simulant containing LiCl, KCl, NaCl, CsI, SrCl2, CeCl3, and NdCl3 called ERV2. The simulants represent salt constituents present in salt wastes from electrorefiners used for electrochemical reprocessing. These salts are reacted with ammonium dihydrogen phosphate (ADP) resulting in a NH4Cl (dechlorination) byproduct that is captured and phosphate product containing oxides of the salt cations. This product is further stabilized using Fe2O3 through vitrification at higher temperatures. The results presented herein describe the properties of CCC-treated materials following dechlorination and vitrification including phase identification and quantification, elemental distributions, and chemical durabilities. The chemical durability in the CCC-cooled samples are lower durability than quenched materials for the ERV2 samples. The phases formed upon CCC cooling are very complex compositionally and microstructurally.
iron phosphate glass, iron phosphate waste forms, ↗
Dehalogenation of electrochemical processing salt simulants with ammonium phosphates and immobilization of salt cations in an iron phosphate glass waste form
This study demonstrates the conversion of simulated pyroprocessing salt wastes [i.e., ER(SF) and ERV2] into chemically durable iron phosphate glass waste forms through reactions with ammonium hydrogen phosphate precursors [i.e., NH4H2PO4 and (NH4)2HPO4] and added Fe2O3. The reaction of the salt simulants with the phosphate precursors resulted in dehalogenation of the salt through the production of NH4Cl and NH4I (along with water), of which the NH4Cl can be used to produce UCl3 oxidant for use in the electrorefiner during pyroprocessing. These iron phosphate glasses contain a notably higher waste loading than the baseline glass-bonded sodalite ceramic waste form, which requires about 70 vol% sodalite to accommodate Cl from the salt, because they are dehalogenated prior to vitrification. The high waste loadings coupled with higher bulk densities (~3×103 kg/m3) than glass-bonded sodalite (~2.3×103 kg/m3) mean that these glasses have a higher storage volume, i.e., the volume required to immobilize a given mass of waste. The iron phosphate glass waste forms were characterized using a variety of techniques including physical property measurements and chemical durability testing. Following initial testing, a proof-of-concept demonstration was conducted to show that the NH4Cl generated from this process could be used to produce UCl3 using depleted uranium dendrites as a feedstock.
phosphate glass, pyroprocessing, waste forms, salt↗
Effect of reduced dehalogenation on the performance of Y zeolite-based sintered waste forms
Not Available
Gardner, Levi (ORCID:0000000273277620)↗
Glass-bonded ceramic waste forms for immobilization of radioiodine from caustic scrubber wastes
Glass-bonded sodalite composite waste forms have been developed for the immobilization of liquid radioactive wastes resulting from off-gas treatment during aqueous reprocessing of used nuclear fuel, with a particular focus on 129I. The proposed composite waste form is comprised of aluminosilicate ceramic phases containing volatile radionuclides bonded with a glassy matrix. In this work, a suite of ten candidate low-temperature glass binders (ZnO-Bi2O3-based glasses and a Na2O-B2O3-SiO2 glass) were examined. Six glasses were mixed with caustic scrubber waste simulant previously converted into a sodalite-rich material (to provide glass fractions of 10 and 20 wt.%), uniaxially pressed into pellets, and sintered at 350 °C or 550 °C for 8 h in air. Iodine retention after heat treatment was assessed by neutron activation analysis, showing retention of 67-100 % of expected iodine. The aqueous durabilities of the resulting materials were then determined, following the ASTM C1308 standard test, showing iodine releases of 1 to 23 g m-2 after 4 d. The cumulative iodine release for the best performing system (a zinc-bismuth-borate glass binder) was <1 g m-2, and its iodine retention from processing was 67 %. The iodine releases compared favorably with other waste forms. In parallel, this best-performing composition was also consolidated via hot isostatic pressing (HIP) in a stainless-steel canister at 550 °C for 2 h under 100 MPa pressure. The HIPed sample was produced at the ~20 g scale and showed improved densification and minimal reaction with the canister.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Assessment of uranium nitride interatomic potentials
Uranium mononitride (UN) is a promising nuclear fuel due to its high fissile density, high thermal conductivity, and suitability for reprocessing. In this study, two uranium nitride interatomic potentials are assessed: Tseplyaev and Starikov's angular-dependent potential and Kocevski et al.'s embedded atom model potential. Predictions of the thermophysical and elastic properties of UN, UN 2 , and α- and β-U 2 N 3 computed using both potentials are assessed and compared to available experimental data. Notably, the Tseplyaev potential performs better with the energetic aspects of UN, e.g., specific heat capacity and point defect formation energies, whereas the Kocevski potential performs better with the structural aspects of UN, e.g., thermal expansion as well as with the elastic properties. The reasons why the Kocevski potential underestimates the UN specific heat are explained by examining the UN phonon properties modeled using both potentials. The Kocevski potential shows better identification of the mechanical stability ranges of UN, UN 2 , and α- and β-U 2 N 3 , reasonably predicting the melting point of UN and predicting stable structures for UN 2 and α- and β-U 2 N 3 . On the other hand, the Tseplyaev potential predicts a premature phase change of both UN and UN 2 and cannot stabilize α- nor β-U 2 N 3 . However, the Kocevski potential cannot predict a stable α-U phase and is thus not suitable for the calculation of formation energies for non-stoichiometric point defects.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Computational insights into the structure of anhydrous Pu(III) oxalate
Despite the plutonium oxalate method's wide use in plutonium reprocessing, the method's mechanistic details remain unclear, particularly the identity of the plutonium oxidation state during conversion from an oxalate hydrate to the oxide. Recently, the optical vibrational spectra of Pu(III) oxalate during calcination were measured, providing an experimental reference for computational studies aimed at elucidating the oxalate structure. Here, in this work, we compare the vibrational and electronic properties of two candidate anhydrous Pu(III) oxalate structures calculated using density functional theory with recent experiments. We find that both structures are plausible and may coexist at experimental temperatures, providing insights into the broad features measured in the Raman and infrared spectra.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Crystalline compounds for remediation of rare-earth fission products: A review
Rare-earth (RE) containing crystals have been investigated as media for the immobilization of RE fission products. During reprocessing of spent nuclear fuels, various fission products including REs, alkalis, and alkaline earths are found after the extraction of actinides. One viable option to immobilize the RE fission products is to incorporate them into chemically durable crystalline phases in specific waste forms. This study summarizes the crystal structures and synthesis methods of six RE-containing compounds that have applications in remediation of RE fission products. These compounds include oxyapatite [Ca2RE8(SiO4)6O2], oxychloride [REOCl], borosilicate [RE3BSi2O10], pyrochlore [RE2A2O7], monazite [REPO4], and perovskite [REAO3] where A denotes transitional metals. This review provides an overview of literature on the usage of these six compounds for immobilizing RE fission products and summarizes different synthesis methods for producing these compounds. Comparisons of structural parameters with different REs in each compound are also discussed.
rare-earth oxychloride, rare-earth oxyapatite, rar↗
Spent fuel nondestructive assay integrated characterization from active neutron, passive neutron, and passive gamma
Spent nuclear fuel comprises a wide range of irradiated isotopic material compositions, and characterization through nondestructive measurements is beneficial in verifying declared parameters before the fuel is placed in storage, final disposal, and/or reprocessed. This paper discusses results from three nondestructive assay instruments, including passive gamma, passive neutron, and active neutron methods, that measured fifty spent fuel assemblies at the Clab interim storage facility in Sweden. Here, integrated analysis of the measurements from the three different instruments allowed parametric assessments of cooling time, burnup, neutron multiplication, fissile mass, initial enrichment, and decay heat of each individual fuel assembly. Passive gamma measurements were found to be the most beneficial in predicting cooling time, passive neutron for determining burnup, active neutron in estimating initial enrichment, and both passive and total neutron for multiplication correlations. Fissile mass was best estimated using any combination of any two of the instruments such that corrections for isotopic changes in the fuel could be accounted for with the first set of measurements and multiplication of the assembly in the second. In conclusion, the nondestructive assay technologies demonstrated through this effort enhance the characterization of spent nuclear fuel assemblies.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
The calculation of light element impurity (α, n) yield curves in a PuO 2 matrix and associated specific yield coefficients: Influence of the reaction cross sections
Most of the Pu separated from irradiated commercial nuclear fuel is stored as PuO 2 . The primary quantitative nondestructive measurement technique used to verify the amount of Pu in storage containers is passive neutron correlation counting. An important physical property of the oxide material is the ratio, α, of the rate of (α, n) neutrons produced inside the item to the rate of neutrons produced by spontaneous fission. This ratio influences the precision of the correlated counting method and affects the interpretation of the data because of how it changes both the primary total neutron production rate and the rate of induced fission events taking place inside the item. In addition to the main O(α, n) contribution, additional contributions come from α-particle interactions with light element impurities that are inevitably present. In this work, we calculate specific (α, n) yield coefficients, expressed in units of neutrons per second per gram of α-emitting nuclide per part per million by mass of the specified impurity element distributed in a pure PuO 2 matrix, for some key α-emitting actinides commonly present in reprocessed Pu ( 238–242 Pu+ 241 Am). These coefficients are directly applicable to nuclear safeguards verification work in which the α ratio is often calculated from the Pu-isotopic composition and chemical information obtained by other means. Further, they also provide a convenient up-to-date reference set against which values generated by other methods can be compared. Results are presented for impurities with atomic number from 3 to 17 inclusive, plus K and Fe. In most cases, these coefficients are not expected to change by more than 5%–10% at any time in the future. However, as new data become available, changes as large as 20% may be needed for some targets (e.g., F). The present yield calculations are limited by the general shortage of quality experimental total (α, n) reaction cross section data, which, together with unexplained variation between determinations, means that an objective and coherent evaluation is not possible. The situation is even less satisfactory for the partial differential cross section needed to calculate neutron spectra.
(𝛼, n) reactions↗
Initial calculations for source term of Molten Salt Reactors
This paper provides an overview of the current MSR design space and lists unique features of the various designs under consideration. Some general considerations for source terms calculation for Molten Salt Reactors (MSRs) are explained. Applicability and limitations of terminology currently defined for legacy light water reactor (LWR) systems are discussed in the view of MSRs and the need for updated terminology is discussed. Calculations carried out for the Molten Salt Reactor Experiment (MSRE) are discussed with a qualitative comparison to the designs presented. The nature of the fission products (FPs) and actinides for Low enriched uranium, thorium and fast U/Pu fuel cycles employed in representative molten salt reactor systems are discussed. Computational results are obtained from a code (Serpent 2) with online reprocessing. Divergence in source terms when fission product bubbling is demonstrated. The source release for each molten salt reactor during postulated accidents is also presented.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Near-infrared spectra and molar absorption coefficients of trivalent lanthanides dissolved in molten LiCl–KCl eutectic
Determining the concentration of the dissolved lanthanide species in LiCl–KCl eutectic salt is important to the development of pyrochemical reprocessing of used nuclear fuel. In this process, lanthanide fission products are found dissolved in the electrorefiner electrolyte in their trivalent oxidation state. The presence of dissolved trivalent lanthanides increases the liquidus temperature of the electrolyte mixture and can lead to the formation of insoluble oxide or oxychloride phases and must therefore be continuously monitored and controlled during the operation. Absorbance spectroscopy is a promising method for continuous measurement of the concentration of lanthanides and other elements dissolved in the electrolyte. The absorption of light by elements is linearly proportional to the concentration of the element for relatively dilute solutions according to the Beer-Lambert law. Although measurement of the absorption of ultraviolet and visible range light by lanthanides in LiCl–KCl eutectic molten salt have been explored previously, near infrared (NIR) absorption spectroscopy has received far less attention. It may, however, provide a better analytical signal when insoluble phases are present due to less Raleigh scattering compared to shorter wavelength radiation. Additionally, it may allow for concentration determination for certain elements using NIR absorption features where UV and visible range features are overlapping with features from other species. In this study, we report the UV–Vis–NIR spectra of the trivalent lanthanide chlorides of neodymium, samarium, and dysprosium in LiCl–KCl eutectic. Molar absorption coefficients are reported for analytically useful absorption maxima, with a focus on the molar absorption coefficients for NIR absorption maxima which have not been reported previously. Additionally, we observe a NIR-range absorption band of Nd3+ which was previously predicted but never experimentally observed. Here, we compare the calculated crystal field levels to the newly observed absorbance band and find them to be in good agreement with previous predictions.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Influence of americium complexation on the radiation-induced chemical reactivity of sulfophenyl bistriazinyl pyridine (SO 3 -Ph-BTP) towards the nitrate radical
Sulfophenyl bistriazinyl pyridine (SO 3 -Ph-BTP) is a hydrophilic organic ligand used to separate actinides and lanthanides. Dose accumulation and time-resolved studies have previously provided insight into the radiolytic stability and degradation pathways of SO 3 -Ph-BTP in reprocessing environments, but no study has yet addressed the impact of minor actinide complexation on the radiation chemistry of this ligand. To begin to fill this knowledge gap, a systematic, time-resolved study exploring the reactivity of the nitrate radical (NO 3 • ) with SO 3 -Ph-BTP in the presence of trivalent americium, Am(III), has been conducted, which demonstrates enhanced reactivity (an order of magnitude faster) upon metal complexation.
38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗
Pulse radiolysis and transient absorption spectra of aqueous solutions of sodium sulfamate
Chemical kinetics for the reactions of sulfamate ions (NH 2 SO 3 − ) with the primary products of water and nitric acid radiolysis were measured in aqueous solutions at ambient temperature. Using time-resolved electron pulse radiolysis techniques with a custom multichannel detection system, we examined the reactivity of NH 2 SO 3 − with the hydroxyl radical ( • OH), hydrogen atom (H • ), and nitrate radical (NO 3 • ). The sulfamate ion was found to react with • OH and H • with second-order rate coefficients of k • OH = (5.60 ± 0.04) × 10 6 M −1 s −1 and k H • = (7.96 ± 0.10) × 10 6 M −1 s −1 , respectively, and with NO 3 • with a rate coefficient of k NO 3 • = (1.67 ± 0.06) × 10 7 M −1 s −1 . The reactions of NH 2 SO 3 − with • OH and H • resulted in the formation of two transient radical species, one with maximum absorbance at 300 nm and a second with maxima at both 300 nm and 600 nm. These spectra are tentatively assigned to • NH 2 SO 3 and • NHSO 3 − , respectively. By measuring the absorbance of these radicals as a function of pH, the radical pK a was determined to be 9.5 ± 0.1. Overall, this work has implications for the longevity and performance of ferrous sulfamate, Fe(NH 2 SO 3 ) 2 , as a plutonium reductant in the reprocessing of used nuclear fuel.
Conrad, Jacy K. [Idaho National Laboratory (INL), ↗
Hydroxypyridinone-based stabilization of Np(IV) enabling efficient U/Np/Pu separations in the Adapted PUREX process
The classical process to recover uranium (U) and plutonium (Pu) from used nuclear fuel using tributyl phosphate (TBP), namely the Plutonium Uranium Redox EXtraction (PUREX) process, is complicated by the persistent presence of neptunium (Np) and thus requires extra purification steps. The concept of Adapted PUREX seeks to achieve Np recovery by adjusting the valence of the metal more effectively, thereby controlling its behavior more precisely. This study introduces the use of an aqueous hydroxypyridinone chelator, 3,4,3-LI(1,2-HOPO) (abbreviated as HOPO), to dictate the behavior of Np for recovery and meanwhile simplify cumbersome reprocessing steps. The interactions between Np and HOPO were probed mechanistically by way of absorption spectrophotometry, in conjunction with cyclic voltammetry. UV–Vis-NIR spectra illustrated the reduction of NpO 2 2+ to Np 4+ , with a fast reaction rate. Cyclic voltammetry revealed quasi-reversible processes between the oxidized and reduced forms of the ligand and its Np complexes. The corresponding heterogeneous rate constants (k 0 ) were estimated from the peak-to-peak separation potentials (ΔE p ), at ~ 4 – 35 μm/s for both HOPO and NpHOPO, with scan rates of 0.01 – 0.4 V/s. Meanwhile, the electromotive force (E MF ) as well as the change of Gibbs free energy (ΔG) were assessed from the half-wave potential (E 1/2 ), demonstrating the completeness of NpO 2 2+ reduction to Np 4+ by HOPO. The cumulative formation constant of the resulting NpHOPO complex (logβ 101 ) was determined by metal competition titration to be 42.0 ± 0.6, corroborating the extraordinarily high affinity of HOPO to tetravalent metal ions. Here, the prowess of valence control by HOPO and the high stability of the formed complex resulted in enhanced separations of Np from U and of Pu from U, with a maximum separation factor of ~7000 for both, nearly 90- and 10300-fold higher, respectively, than the values obtained using conventional PUREX formulae.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Direct recycling and remanufacturing of anode scraps
With the rapid expansion of Li-ion battery production, significant amounts of electrode scraps that need to be recycled are being produced during cell manufacturing. Anode scrap that comprises critical materials such as graphite and valuable Cu should be recycled and reintegrated into the battery supply chain. This study reports a simple yet efficient water-based recovery process for delaminating anode films from Cu foils through the intercalation of water between the hydrophilic Cu foil and hydrophobic anode coating. Because of the absence of harsh chemicals, the recovered anode films and Cu foils are battery grade and free of damage in terms of physical and chemical properties. This study also demonstrates the reprocessing of those anode films into a new anode that exhibits electrochemical performance similar to that of the pristine anode. We report this environmentally friendly and cost-effective separation technique allows battery manufacturers to directly recycle and reuse their electrode scraps safely and effectively on-site.
25 ENERGY STORAGE↗