Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reduced Defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Defects and Defect Engineering of Two-Dimensional Transition Metal Dichalcogenide (2D TMDC) Materials

As layered materials, transition metal dichalcogenides (TMDCs) are promising two-dimensional (2D) materials. Interestingly, the characteristics of these materials are transformed from bulk to monolayer. The atomically thin TMDC materials can be a good alternative to group III–V and graphene because of their emerging tunable electrical, optical, and magnetic properties. Although 2D monolayers from natural TMDC materials exhibit the purest form, they have intrinsic defects that limit their application. However, the synthesis of TMDC materials using the existing fabrication tools and techniques is also not immune to defects. Additionally, it is difficult to synthesize wafer-scale TMDC materials for a multitude of factors influencing grain growth mechanisms. While defect engineering techniques may reduce the percentage of defects, the available methods have constraints for healing defects at the desired level. Thus, this holistic review of 2D TMDC materials encapsulates the fundamental structure of TMDC materials, including different types of defects, named zero-dimensional (0D), one-dimensional (1D), and two-dimensional (2D). Moreover, the existing defect engineering methods that relate to both formation of and reduction in defects have been discussed. Finally, an attempt has been made to correlate the impact of defects and the properties of these TMDC materials.

2D materials↗

Fast Growth of Ga2O3 on Highly Offcut (100)-Oriented Substrates

Beta-Ga2O3 has emerged as a leading candidate for next-generation power electronics, radio frequency (RF) switches, and extreme environment electronics due to a wide band gap (4.6 - 4.9 eV), high dopability (approximately 40 meV activation energy for an isolated silicon donor), and melt growth characteristics resulting in commercially available 4-inch substrates and commercial demonstrations of 6-inch substrates by multiple techniques. The (100) surface of Ga2O3 is highly desirable from a device and epitaxy standpoint - bulk growth of (100) material is more scalable than (010), the surface is nearly lattice-matched to p-type partner NiO, and Al2O3 incorporates at higher concentrations without phase separation. More importantly, the impact ionization coefficients along the [100] direction are low, leading to the highest possible critical fields. This is advantageous compared to the current state of the art, (001), due to reduced surface defects and increased possible breakdown voltage. However, the epitaxial growth rate on (100) surfaces is less than 10% of other faces due to weak bonding and favorable desorption, and on-axis (100) growth easily forms twin domains. Recent demonstrations have shown growth rate improvements from 0.4 nm/min to 1.5 nm/min by growing on (100) wafers that are offcut 6 degrees in the -c direction. These films show step-flow growth from (20-1) step-edges and high electron mobility due to suppressed twins. Despite these exciting results, offcuts greater than 6 degrees have not been explored due to the waste associated with grinding and polishing large offcuts. In this talk we will discuss the molecular beam epitaxy (MBE) growth and properties of Beta-Ga2O3 grown on (100) substrates offcut in the -c direction up to 13.4 degrees. These large offcuts are enabled by edge-fed film-defined growth (EFG) where the offcut is grown into the surface by pulling the crystal through the EFG die with the seed crystal rotated by the desired offcut angle. We will demonstrate that 13.4 degrees offcut substrates still exhibit a terraced (100) surface, and that a >10x increase (>5 nm/min) in growth rate is achieved. As previously reported on lower offcuts, we observe reversal of substrate twin domains around the (001) direction at the substrate-epilayer interface. We will discuss electrical properties including record-low (by MBE) unintentional doping densities of < 5E15 cm-3 and critical breakdown field in Schottky barrier diodes comparable with state-of-the-art (001) Ga2O3 without edge termination.

36 MATERIALS SCIENCE↗

Mitigating leaks in membranes

Two-dimensional material based filters, their method of manufacture, and their use are disclosed. In one embodiment, a membrane may include an active layer including a plurality of defects and a deposited material associated with the plurality of defects may reduce flow therethrough. Additionally, a majority of the active layer may be free from the material. In another embodiment, a membrane may include a porous substrate and an atomic layer deposited material disposed on a surface of the porous substrate. The atomic layer deposited material may be less hydrophilic than the porous substrate and an atomically thin active layer may be disposed on the atomic layer deposited material.

42 ENGINEERING↗

Mitigating leaks in membranes

Two-dimensional material based filters, their method of manufacture, and their use are disclosed. In one embodiment, a membrane may include an active layer including a plurality of defects and a deposited material associated with the plurality of defects may reduce flow therethrough. Additionally, a majority of the active layer may be free from the material. In another embodiment, a membrane may include a porous substrate and an atomic layer deposited material disposed on a surface of the porous substrate. The atomic layer deposited material may be less hydrophilic than the porous substrate and an atomically thin active layer may be disposed on the atomic layer deposited material.

36 MATERIALS SCIENCE↗

Planarization of optical substrates

A method of making a laser mirror in which a mirror substrate has at least a one micron size nodular defect includes depositing a planarization layer over the mirror substrate and the nodular defect, depositing a layer of silicon dioxide over the planarization layer, and etching away a portion of the layer of silicon dioxide. The method also includes thereafter, depositing a layer of hafnium dioxide over the layer of silicon dioxide and repeating the steps of depositing a layer of silicon dioxide, etching away a portion of the layer of silicon dioxide, and depositing a layer of hafnium dioxide until the nodular defect is reduced in size a predetermined amount.

Stolz, Christopher J.↗

Multi-Pass Hybrid Laser Arc Welding of Alloy 740H

The presentation reviews the progress made toward reducing the joining time of an advanced nickel-based alloy, Alloy 740H by a factor of two using a novel two step fusion welding approach. In the first step, a high powered laser is used to rapidly join thick weld groove lands (~10-12 mm thick) during a single pass. Hybrid laser arc welding (HLAW) is then used to fill the remaining weld groove and complete the joint. This sequential process also utilizes laser wobble in both steps to reduce welding defects and refine the weld microstructure to obtain improved properties compared to conventional gas tungsten or gas metal arc welds, GTAW and GMAW, respectively. The creep behavior of laser-only thick weld groove land welds and HLAW welds were found to be the same or slightly improved compared to conventional GMAW or GTAW welds in this alloy. Creep tests have been started to verify the long-term creep behavior (~10,000 hrs) of these welds. Modeling results on deep penetration laser welding are presented and the initial simulations of laser welding with laser wobble are shown. The next phase of the project will combine the two processes to make complete welds - deep penetration laser welds of thick weld groove lands followed by rapid filling of the remaining weld groove by HLAW - in thick plates (32 mm thick) Alloy 740H plate and entails development of narrow weld groove welding to further decrease the joining time of this alloy.

36 MATERIALS SCIENCE↗

Mitigating leaks in membranes

Two-dimensional material based filters, their method of manufacture, and their use are disclosed. In one embodiment, a membrane may include an active layer including a plurality of defects and a deposited material associated with the plurality of defects may reduce flow therethrough. Additionally, a majority of the active layer may be free from the material. In another embodiment, a membrane may include a porous substrate and an atomic layer deposited material disposed on a surface of the porous substrate. The atomic layer deposited material may be less hydrophilic than the porous substrate and an atomically thin active layer may be disposed on the atomic layer deposited material.

Karnik, Rohit N.↗

Enhancing ICARUS and REDTOP Software and Hardware: Event Generator Interface Development and Calorimeter Tile Prototype

ICARUS (Imaging Cosmic And Rare Underground Signals) is a liquid argon time projection chamber (LArTPC) detector that pursues the sterile neutrino, which relies on accurate simulations of neutrino-argon interactions. REDTOP (Rare Eta Decays To Observe new Physics) is a proposed low-energy, high-intensity meson factory designed to explore rare $\eta$/$\eta'$ meson decays and probe physics beyond the Standard Model. As a next-generation experiment, this requires both accurate simulations and innovative detector technologies. This project contributes to both ICARUS, from a simulation perspective, and REDTOP, from both a simulation and detection perspective, through the event generation of lepton-nucleon interactions and the physical enhancement of the calorimeter technology within the REDTOP detector. We developed an interface between ACHILLES (A CHIcago Land Lepton Event Simulator), a theory-driven lepton-level event generator, and GENIE, a robust event generator framework used for neutrino physics. By incorporating the precise theoretical cross-section calculations of ACHILLES into the experimental realism of GENIE, the interface allows for improved accuracy of neutrino-nucleon simulations, which can be adapted for the proton beam specifications of the REDTOP meson factory as well as for the ICARUS experiment. In parallel, we developed an improved prototype for the ADRIANO2 (A Dual Readout Integrally Active Non-segmented Option) dual-readout calorimeter tiles for the REDTOP detector. To improve the efficiency of the lead-glass tiles trapping Cherenkov light for energy reconstruction and particle identification, we optimized the application of a highly reflective coating. Through viscosity and thickness control, masking, and a custom spray technique, we refined the coating process to reduce surface defects and improve light yield. Together, these efforts strengthen the ICARUS neutrino program and REDTOP's capability of detecting rare decay events.

Visser, Erin [Michigan State U.] (ORCID:0009000184↗

Defect driven tailoring of colossal dielectricity of Reduced Graphene Oxide

Highlights: • Reduced graphene oxides (RGO) are prepared by two chemical routes. • Defects in RGO are characterized by Raman, FTIR and XPS studies. • Defects tailor colossal dielectricity in RGO. - Abstract: Reduced graphene oxide (RGO) is prepared in two different chemical routes where reduction of graphene oxide is performed by hydrazine hydrate and through high pressure in hydrothermal reactor. Samples are characterized by X-ray powdered diffraction (XRD), thermo gravimetric analysis (TGA), field emission scanning electron microscopy (FESEM) and tunneling electron microscopy (TEM). Types of defects are probed by Raman, FTIR spectroscopy and X-ray photoelectron spectroscopy (XPS). UV–vis absorption reveals different optical band gaps of the two RGOs. Conductivity mechanism is studied through I–V measurements displaying different characteristic features which are addressed due to the presence of defects appeared in different synthesis. Significantly high value (∼10{sup 4}) of dielectric permittivity at 10 MHz is attractive for technological application which could be tuned by the defects present in RGO.

36 MATERIALS SCIENCE↗

Shape controlled Sn doped ZnO nanostructures for tunable optical emission and transport properties

Pure and Sn doped ZnO nanostructures have been grown on SiO{sub 2}/Si substrates by vapor-solid technique without using any catalysts. It has been found that the morphology of the nanostructures depend strongly on the growth temperature and doping concentration. By proper tuning of the growth temperature, morphology of pure ZnO can be changed from tetrapods to multipods. On the other hand, by varying the doping concentration of Sn in ZnO, the morphology can be tuned from tetrapods to flower-like multipods to nanowires. X-ray diffraction pattern reveals that the nanostructures have a preferred (0002) growth orientation, and they are tensile strained with the increase of Sn doping in ZnO. Temperature-dependent photoluminescence characteristics of these nanostructures have been investigated in the range from 10 to 300 K. Pure ZnO tetrapods exhibited less defect state emissions than that of pure ZnO multipods. The defect emission is reduced with low concentration of Sn doping, but again increases at higher concentration of doping because of increased defects. Transport properties of pure and Sn doped ZnO tetrapods have been studied using complex-plane impedance spectroscopy. The contribution from the arms and junctions of a tetrapod could be distinguished. Sn doped ZnO samples showed lower conductivity but higher relaxation time than that of pure ZnO tetrapods.

36 MATERIALS SCIENCE↗

Laser-engraved defects in TiO 2 support: Enhancing reducibility and redox capability of Pt/TiO 2 catalyst for reactive and selective hydrogenation

Titanium dioxide (TiO 2 ) has been studied as catalyst or catalyst support in catalysis. Its synthesis or modification approach controls the structural, optical, and electronic properties. Here, in this work, we applied laser engraving to the anatase TiO 2 and studied the consequent changes in its structure and property as well as the properties of TiO 2 supported platinum (i.e., Pt/TiO 2 ) catalyst. The laser engraving enlarged the particle size, formed rutile phase and created defects (i.e., oxygen vacancy (O v ) and Ti 3+ ) in anatase TiO 2 . This induced band gap change and enhanced visible light absorption. The defects created by laser engraving are stable and more reducible than those existed in the pristine TiO 2 . The defective TiO 2 is structurally stable and has great redox properties. The metal-support interaction in the Pt/defective TiO 2 catalyst is stronger than that of the pristine Pt/TiO 2 catalyst, which enabled higher reactivity and selectivity in hydrogenation of 3-nitrostyrene and furfuryl alcohol. Laser-engraved TiO 2 has been rarely studied for thermal catalysis. This work provides basic understanding of material properties and catalysis application of laser-engraved catalyst supports and catalysts in field of thermal catalysis.

25 ENERGY STORAGE↗

Carbon Defect Characterization of Nitrogen-Doped Reduced Graphene Oxide Electrocatalysts for the Two-Electron Oxygen Reduction Reaction

Numerous modified-carbon catalysts have been developed for the direct synthesis of hydrogen peroxide through electrochemical oxygen reduction. Yet, given the complex structure of most porous carbons and the poor oxygen reduction reaction (ORR) selectivity typically observed when they are used as catalysts, it is still unclear which carbon defects are responsible for the high two-electron ORR activity typically observed in these materials. Here, we study electrocatalytic peroxide formation activity of nitrogen-doped reduced graphene oxide ( N -rGO) materials to relate carbon defects to electrocatalytic activity. To achieve this, we selected two N -rGO electrodes that selectively produce peroxide at all potentials studied (0.70–0.10 V vs RHE) under alkaline conditions. Oxygen reduction studies, combined with material characterization, especially solid-state 13 carbon nuclear magnetic resonance coupled with magic angle spinning and cross-polarization, demonstrate that epoxy or ether groups in the N -rGO catalyst are likely associated with the active sites that form peroxide at the lowest overpotential in alkaline media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and spectroscopic properties of high temperature prepared ZrO₂–TiO₂ mixed oxides

ZrO₂-TiO₂ mixed oxides of various composition, with the molar fraction of TiO₂ ranging from 0.1% to 15%, have been prepared via sol-gel synthesis and then calcined at 1273 K to check both their thermal stability and physicochemical properties. These solids are usually employed in photocatalytic processes and as active phase supports in heterogeneous catalysis. As indicated by X-ray diffraction and Raman spectroscopy, solid solutions based on Ti ions diluted in the ZrO₂ matrix are formed in the whole range of Ti molar fraction examined. Materials with low Ti loading (0.1%–1%) are basically constituted by the monoclinic phase of ZrO₂ while the tetragonal phase becomes prevalent at 15% of TiO₂ molar fraction. The presence of Ti ions modify the electronic structure of the solid as revealed by investigation of the optical properties. The typical band gap transition of ZrO₂ undergoes, in fact, a red shift roughly proportional to the Ti loading which reach the remarkable value of 1.6 eV for the sample with 10% of molar Ti concentration. Comparing chemical analysis of the solids with XPS data it has been put into evidence that the titanium ions distribution into the solid is not uniform and the concentration of Ti⁴⁺ tend to be higher in subsurface layers than in the crystal bulk. The introduction of titanium ions in the structure increases the reducibility of the solid. Annealing under vacuum at various temperatures causes oxygen depletion with consequent reduction of the solid which shows up mainly in terms of formation of Ti³⁺ reduced centres which are characterized by a typical EPR signal. Ti³⁺ defects forms, as also forecast by theoretical modelling of the solid, as their energy is lower than that of other possible reduced defective centers. The reduced solids are able to transfer electrons to adsorbed oxygen molecules in mild condition resulting in the formation of surface superoxide anions (O₂⁻) which are stabilized on surface Zr⁴⁺ or, alternatively, on Ti⁴⁺ ions according to the sample composition. - Graphical abstract: The presence of Ti in ZrO₂ modifies UV–vis and electronic properties of mixed oxides. Highlights: • ZrO₂–TiO₂ mixed oxides have been prepared via sol–gel synthesis. • Solids with low Ti loading are constituted by the monoclinic phase of ZrO₂. • The presence of Ti ions modify the electronic structure of the solid. • The introduction of titanium ions increases the reducibility of the solid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing Defect Sites on CeO2 Nanocrystals with Well-Defined Surface Planes by Raman Spectroscopy and O2 Adsorption

Defect sites play an essential role in ceria catalysis. In this study, ceria nanocrystals with well defined surface planes have been synthesized and utilized for studying defect sites with both Raman spectroscopy and O2 adsorption. Ceria nanorods ({110} + {100}), nanocubes ({100}), and nano-octahedrons ({111}) are employed to analyze the quantity and quality of defect sites on different ceria surfaces. On oxidized surface, nanorods have the most abundant intrinsic defect sites, followed by nanocubes and nano-octahedrons. When reduced, the induced defect sites are more clustered on nanorods than on nanocubes although similar amount (based on surface area) of such defect sites are produced on the two surfaces. Very few defect sites can be generated on the nano-octahedrons due to the least reducibility. These differences can be rationalized by the crystallographic surface terminations of the ceria nanocrystals. The different defect sites on these nanocrystals lead to the adsorption of different surface dioxygen species. Superoxide on one-electron defect sites and peroxide on two-electron defect sites with different clustering degree are identified on the ceria nanocrystals depending on their morphology. Furthermore, the stability and reactivity of these oxygen species are also found to be surface-dependent, which is of significance for ceria-catalyzed oxidation reactions.

Wu, Zili↗

Multiscale modeling of thermal conductivity of high burnup structures in UO 2 fuels

The high burnup structure forming at the rim region in UO 2 based nuclear fuel pellets has interesting physical properties such as improved thermal conductivity, even though it contains a high density of grain boundaries and micron-size gas bubbles. To understand this counterintuitive phenomenon, mesoscale heat conduction simulations with inputs from atomistic simulations and experiments were conducted to study the thermal conductivities of a small-grain high burnup microstructure and two large-grain unrestructured microstructures. We concluded that the phonon scattering effects caused by small point defects such as dispersed Xe atoms in the grain interior must be included in order to correctly predict the thermal transport properties of these microstructures. In extreme cases, even a small concentration of dispersed Xe atoms such as 10 -5 can result in a lower thermal conductivity in the large-grain unrestructured microstructures than in the small-grain high burnup structure. The high-density grain boundaries in a high burnup structure act as defect sinks and can reduce the concentration of point defects in its grain interior and improve its thermal conductivity in comparison with its large-grain counterparts. Furthermore, an analytical model was developed to describe the thermal conductivity at different concentrations of dispersed Xe, bubble porosities, and grain sizes. Upon calibration, the model is robust and agrees well with independent heat conduction modeling over a wide range of microstructural parameters.

36 MATERIALS SCIENCE↗

pymatgen-analysis-defects: A Python package for analyzing point defects in crystalline materials

Point defects can often determine the properties of semiconductor and optoelectronic materials. Due to the large simulation cell and the higher-cost density functionals required for defect simulations, the computational cost of defect calculations is often orders of magnitude higher than that of bulk calculations. As such, managing and curating the results of the defect calculations generated by a single user has the potential to save a significant amount of computational resources. Moreover, eventually building a high-quality, persistent defects database will significantly reduce the computational cost of defect calculations for the entire community.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

WE-E-18A-01: Large Area Avalanche Amorphous Selenium Sensors for Low Dose X-Ray Imaging

Purpose: A large area indirect flat panel imager (FPI) with avalanche gain is being developed to achieve x-ray quantum noise limited low dose imaging. It uses a thin optical sensing layer of amorphous selenium (a-Se), known as High-Gain Avalanche Rushing Photoconductor (HARP), to detect optical photons generated from a high resolution x-ray scintillator. We will report initial results in the fabrication of a solid-state HARP structure suitable for a large area FPI. Our objective is to establish the blocking layer structures and defect suppression mechanisms that provide stable and uniform avalanche gain. Methods: Samples were fabricated as follows: (1) ITO signal electrode. (2) Electron blocking layer. (3) A 15 micron layer of intrinsic a-Se. (4) Transparent hole blocking layer. (5) Multiple semitransparent bias electrodes to investigate avalanche gain uniformity over a large area. The sample was exposed to 50ps optical excitation pulses through the bias electrode. Transient time of flight (TOF) and integrated charge was measured. A charge transport simulation was developed to investigate the effects of varying blocking layer charge carrier mobility on defect suppression, avalanche gain and temporal performance. Results: Avalanche gain of ∼200 was achieved experimentally with our multi-layer HARP samples. Simulations using the experimental sensor structure produced the same magnitude of gain as a function of electric field. The simulation predicted that the high dark current at a point defect can be reduced by two orders of magnitude by blocking layer optimization which can prevent irreversible damage while normal operation remained unaffected. Conclusion: We presented the first solid state HARP structure directly scalable to a large area FPI. We have shown reproducible and uniform avalanche gain of 200. By reducing mobility of the blocking layers we can suppress defects and maintain stable avalanche. Future work will optimize the blocking layers to prevent lag and ghosting.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Controlling AM spatter and conduction

An intelligent feed forward model to control additive manufacturing (AM) laser powder bed fusion process and reduce spattering whereby defects are eliminated by controlling the laser power and reducing spattering through a computer model. This application describes using a proportional integral derivative (PID) controller to create a power map that reduces spattering.

Khairallah, Saad A.↗