Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Rechargeable batteries”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Interfacial Defect of Lithium Metal in Solid-State Batteries

All-solid-state battery with Li metal anode is a promising rechargeable battery technology with high energy density and improved safety. Currently, the application of Li metal anode is plagued by the failure at the interfaces between lithium metal and solid electrolyte (SE). However, little is known about the defects at Li–SE interfaces and their effects on Li cycling, impeding further improvement of Li metal anodes. Herein, by performing large-scale atomistic modeling of Li metal interfaces with common SEs, we discover that lithium metal forms an interfacial defect layer of nanometer-thin disordered lithium at the Li–SE interfaces. Further, this interfacial defect Li layer is highly detrimental, leading to interfacial failure such as pore formation and contact loss during Li stripping. By systematically studying and comparing incoherent, coherent, and semi-coherent Li–SE interfaces, we find that the interface with good lattice coherence has reduced Li defects at the interface and has suppressed interfacial failure during Li cycling. Our finding discovered the critical roles of atomistic lithium defects at interfaces for the interfacial failure of Li metal anode, and motivates future atomistic-level interfacial engineering for Li metal anode in solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Probing Mg Intercalation in the Tetragonal Tungsten Bronze Framework V 4 Nb 18 O 55

While commercial Li-ion batteries offer the highest energy densities of current rechargeable battery technologies, their energy storage limit has almost been achieved. Therefore, there is considerable interest in Mg batteries, which could offer increased energy densities in comparison to Li-ion batteries if a high-voltage electrode material, such as a transition-metal oxide, can be developed. However, there are currently very few oxide materials which have demonstrated reversible and efficient Mg 2+ insertion and extraction at high voltages; this is thought to be due to poor Mg 2+ diffusion kinetics within the oxide structural framework. Here, in this paper, the authors provide conclusive evidence of electrochemical insertion of Mg 2+ into the tetragonal tungsten bronze V 4 Nb 18 O 55 , with a maximum reversible electrochemical capacity of 75 mA h g –1 , which corresponds to a magnesiated composition of Mg 4 V 4 Nb 18 O 55 . Experimental electrochemical magnesiation/demagnesiation revealed a large voltage hysteresis with charge/discharge (1.12 V vs Mg/Mg 2+ ); when magnesiation is limited to a composition of Mg 2 V 4 Nb 18 O 55 , this hysteresis can be reduced to only 0.5 V. Hybrid-exchange density functional theory (DFT) calculations suggest that a limited number of Mg sites are accessible via low-energy diffusion pathways, but that larger kinetic barriers need to be overcome to access the entire structure. The reversible Mg 2+ intercalation involved concurrent V and Nb redox activity and changes in crystal structure, as confirmed by an array of complementary methods, including powder X-ray diffraction, X-ray absorption spectroscopy, and energy-dispersive X-ray spectroscopy. Consequently, it can be concluded that the tetragonal tungsten bronzes show promise as intercalation electrode materials for Mg batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Discharge intermittency considerably changes ZnO spatial distribution in porous Zn anodes

Porous Zn anodes are ubiquitous in primary batteries and are under development for low-cost rechargeable batteries. Spatial distribution of ZnO discharge product is a critical factor in these, because it can passivate the active material. In rechargeable cells this is related to a major failure mechanism called shape change, in which ZnO is relocated to inactive locations. In this work we demonstrate rest steps during discharge of primary Zn anodes dramatically alter the placement of ZnO in the anode. In alkaline electrolyte, ZnO discharge product is typically modeled as precipitating close to Zn particles, forming a porous ZnO shell around the Zn core. Further, anodes discharged continuously at low-rate are compared to anodes similarly discharged intermittently, using in situ computed tomography from a synchrotron source. Zn–ZnO core-shell structures are produced during continuous discharge but are not found in cells discharged intermittently. Continuously discharged cells showed that ZnO was formed most strongly near the separator, in agreement with Zn anode battery models. In pulse-discharged cells, ZnO was more radially distributed and was in large formations not physically connected to Zn particles. Thus, discharge intermittency changes spatial distribution of ZnO in ways that are unpredicted by Zn anode models.

25 ENERGY STORAGE↗
DOE OSTI2025

Electrodepositing Textured Sn Film as a Highly Reversible Anode for Aqueous Batteries

Electrodepositing metal materials in large capacity, at low potential, and with high reversibility serves as the foundation for any aqueous rechargeable battery chemistry to realize the promises of high energy, low cost, and high safety. However, such a foundation is not solid because of the natural tendency of metals to form irregular, nonplanar, and often dendritic morphologies during electrochemical crystallization, which is further amplified in an acidic environment due to the faster kinetics of the coupled proton and mass-transport processes between hydrated metal ions and free metal atoms. As a typical representative, tin metal (Sn 0 ) has potential to achieve high energy in acidic batteries, but its nonuniform large-particle morphology, obtained from traditional electrodeposition, leads to dead Sn 0 formation and deteriorating reversibility, accompanied by the sustained hydrogen evolution reaction (HER) and active Sn 0 loss. Here, in this study, we report quaternary onium salts as effective interfacial cocations that, via selective adsorption, steadily texturize Sn 0 deposition along the (211) plane, which is intrinsically inert to the HER, thus regulating the film deposition process by favoring the formation of planar Sn 0 film. Such Sn 0 film brings exceptional reversibility in acidic electrolytes, which translates into sustained cycling stability at applicable areal capacities in both anode-half cells (similar to 1500 deposition/dissolution cycles at 5 mAh cm -2 ) and full cells (350 charge/discharge cycles at 5 mAh cm -2 ). Textured electrodeposition with intrinsic HER-suppression capability provides a universal solution for diverse metal anode materials in rechargeable energy-dense aqueous batteries.

Sn metal↗
DOE OSTI2020

Self-supported MoO 2 /MoS 2 nano-sheets embedded in a carbon cloth as a binder-free substrate for high-energy lithium–sulfur batteries

As one of the most prospective candidates for next-generation rechargeable batteries, lithium-sulfur (Li-S) batteries currently still encounter great challenges associated with the low conductivity, severe shuttle effects, and sluggish redox kinetics. Herein, a self-supported sulfur host is fabricated by an in-situ growth of MoO 2 /MoS 2 nano-sheets on a carbon cloth (CC). First, carbon cloth serves as a good template for the morphology-controlled synthesis of nanostructured materials, which not only alleviates the agglomeration of MoO2/MoS2, but also enhances the flexibility and mechanical strengthen of the hybrid architecture as a free-standing host. Second, the polysulfide-trapping ability can be greatly enhanced by both physical and chemical adsorption from the MoO 2 /MoS 2 -anchored carbon cloth. Moreover, the partially sulfurized MoO 2 /MoS 2 nano-sheets integrate the benefits of conductive MoO 2 and sulfiphilic MoS 2 , thus facilitating fast charge transfer and redox kinetics of polysulfide conversion. As a result, these attributes enable the host to hold a high sulfur loading (up to 7.6 mg cm -2 ), which exceeds most of the reported carbon cloth-related cathode work in the literature. Furthermore, the Li-S cells can achieve a high peak capacity of 1350 mA h g -1 , excellent rate capability (C/20 - 2C rate), impressive areal capacity (up to 6.3 mA h cm -2 ), and a high capacity retention of 85% after 100 cycles.

25 ENERGY STORAGE↗
DOE OSTI2022

A KMnO 4 -Generated Colloidal Electrolyte for Redox Mediation and Anode Protection in a Li–Air Battery

The rechargeable lithium-oxygen (Li-O 2 ) battery has the highest theoretical specific energy density of any rechargeable batteries and could transform energy storage systems if a practical device could be attained. However, among numerous challenges, which are all interconnected, are polarization due to sluggish kinetics, low cycle life, small capacity, and slow rates. Here, in this study, we report on use of KMnO 4 to generate a colloidal electrolyte made up of MnO 2 nanoparticles. The resulting electrolyte provides a redox mediator for reducing the charge potential and lithium anode protection to increase cycle life. This electrolyte in combination with a stable binary transition metal dichalcogenide alloy, Nb 0.5 Ta 0.5 S 2 , as the cathode enables the operation of a Li-O 2 battery at a current density of 1 mA center dot cm -2 and specific capacity ranging from 1000 to 10000 mA center dot h center dot g -1 (corresponding to 0.1-1 mA center dot h center dot cm -2 ) in a dry air environment with a cycle life of up to 150. This colloidal electrolyte provides a robust approach for advancing Li-air batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Modulating Li + and Polysulfide Solvation with Low-Density Moderately Solvating Electrolytes for Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries show great promise as the next-generation rechargeable batteries, yet they still suffer from polysulfide shuttling and interphasial instability. Electrolyte, as the medium for ion transport and sulfur conversion, plays a crucial role in overcoming these challenges. Here, we introduce a moderately solvating electrolyte (MSE) based on low-density, low-viscosity, and nonfluorinated ether co-solvents that balances polysulfide suppression, Li metal stabilization, and redox kinetics. Through multiple solvent–solvent and solvent-ion interactions, the optimized MSE weakens Li + -solvent pairing while strengthening cation–anion interactions, thereby lowering the desolvation barrier and promoting the formation of a favorable solid–electrolyte interphase (SEI). Meanwhile, MSE limits the polysulfide dissolution but improves the accessibility of active material through better wettability and tailored solvation environment, leading to an altered sulfur deposition mechanism with β – α conversion. This approach enables a stable cycling of high-mass loading Li–S cells (> 3.5 mg cm -2 ) at both room temperature and 45 °C (where shuttling and side reactions are severer), and demonstrates a pouch cell with lean electrolyte content (4.5 µL mg s -1 ). This work highlights a practical route to develop high-performance electrolyte for Li–S cells and provides mechanistic insights into their operation.

25 ENERGY STORAGE↗
DOE OSTI2021

Optimization of Localized High Concentration Electrolytes (LHCE) for Li||LiCoO 2 and Si|| LiCoO 2 Batteries used in Consumer Electronics Applications (Final Report for I3T Project 75934)

This project will optimize localized high concentration electrolyte (LHCE) for Li/LCO and Si/LCO batteries for consumer electronics applications, including select the best solvent and diluent, optimize the ratios of the solvents and the salt concentration. Results will be demonstrated not only in both coin cells, but also in pouch cells, which is required for large-scale commercial applications. This work can provide better understanding that would also benefit other LMB projects, including Li/NMC and Li/S batteries for electric vehicle applications. In the history of rechargeable batteries, all batteries have been first used in small scale consumer electronics, then eventually penetrate to large scale applications such as electrical vehicle or grid. We believe this development route will also be true for LMBs. By developing the best electrolyte for Li/LCO and Si/LCO chemistry, we will not only get the early market entry in consumer electronics, but we can also accumulate experience on the practical application of LMBs which can be used to further develop other types of LMBs for EV and other large-scale applications pursued by DOE.

25 ENERGY STORAGE↗
DOE OSTI2022

Unique redox-active phenothiazine combinations with depressed melting points for increased solubility and method of use in energy storage and in redox flow batteries

A combination of redox active compounds is useful in connection with a rechargeable battery and includes a first redox active compound having a first solubility, and a second redox active compound having a second solubility, wherein the combination has a third solubility that is greater than one or both of the first solubility and the second solubility.

Odom, Susan A.↗
NASA NTRS1982

Human Tissue Stimulator

Neurodyne Corporation Human Tissue Stimulator (HTS) is a totally implantable system used for treatment of chronic pain and involuntary motion disorders by electrical stimulation. It was developed by Pacesetter Systems, Inc. in cooperation with the Applied Physics Laboratory. HTS incorporates a nickel cadmium battery, telemetry and command systems technologies of the same type as those used in NASA's Small Astronomy Satellite-3 in microminiature proportions so that the implantable element is the size of a deck of cards. The stimulator includes a rechargeable battery, an antenna and electronics to receive and process commands and to report on its own condition via telemetry, a wireless process wherein instrument data is converted to electrical signals and sent to a receiver where signals are presented as usable information. The HTS is targeted to nerve centers or to particular areas of the brain to provide relief from intractable pain or arrest involuntary motion. The nickel cadmium battery can be recharged through the skin. The first two HTS units were implanted last year and have been successful. Extensive testing is required before HTS can be made available for general use.

Source record↗
NASA NTRS2004

Performance Characterization of a Lithium-ion Gel Polymer Battery Power Supply System for an Unmanned Aerial Vehicle

Unmanned aerial vehicles (UAVs) are currently under development for NASA missions, earth sciences, aeronautics, the military, and commercial applications. The design of an all electric power and propulsion system for small UAVs was the focus of a detailed study. Currently, many of these small vehicles are powered by primary (nonrechargeable) lithium-based batteries. While this type of battery is capable of satisfying some of the mission needs, a secondary (rechargeable) battery power supply system that can provide the same functionality as the current system at the same or lower system mass and volume is desired. A study of commercially available secondary battery cell technologies that could provide the desired performance characteristics was performed. Due to the strict mass limitations and wide operating temperature requirements of small UAVs, the only viable cell chemistries were determined to be lithium-ion liquid electrolyte systems and lithium-ion gel polymer electrolyte systems. Two lithium-ion gel polymer cell designs were selected as candidates and were tested using potential load profiles for UAV applications. Because lithium primary batteries have a higher specific energy and energy density, for the same mass and volume allocation, the secondary batteries resulted in shorter flight times than the primary batteries typically provide. When the batteries were operated at lower ambient temperatures (0 to -20 C), flight times were even further reduced. Despite the reduced flight times demonstrated, for certain UAV applications, the secondary batteries operated within the acceptable range of flight times at room temperature and above. The results of this testing indicate that a secondary battery power supply system can provide some benefits over the primary battery power supply system. A UAV can be operated for hundreds of flights using a secondary battery power supply system that provides the combined benefits of rechargeability and an inherently safer chemistry.

Reid, Concha M.↗
NASA NTRS1987

Polyphase alloys as rechargeable electrodes in advanced battery systems

The rechargeability of electrochemical cells is often limited by negative electrode problems. These may include loss of capacity, increased impedance, macroscopic shape change, dendrite growth, or a tendency for filamentary or whisker growth. In principle, these problems can be reduced or eliminated by the use of alloys that undergo either displacement or insertion reactions at reactant species activities less than unity, rather than pure elements. The fundamental reasons for some of these problems with elemental electrodes, as well as the basic principles involved in the different behavior of alloys, are briefly discussed. More information is now available concerning the thermodynamic and kinetic properties of a number of alloys of potential interest for use as electrodes in elevated temperature lithium battery systems. Recent results have extended these results down to ambient temperatures, indicating that some such materials may be of interest for use with new low temperature molten salt electrolytes, or with organic solvent electrolytes. The all solid mixed conductor matrix concept is also reviewed.

Huggins, Robert A.↗
DOE OSTI2021

Advanced strategies for the development of porous carbon as a Li host/current collector for lithium metal batteries

Lithium metal is considered a promising anode material for high-energy-density rechargeable batteries because of its high specific theoretical capacity (3860 mAh g -1 , low mass density (0.534 g cm -3 ), and low electrochemical redox potential (-3.04 V vs. the standard hydrogen electrode). However, the high reactivity of Li with the electrolyte leads to the formation of an unstable solid electrolyte interphase (SEI) and continuous side reactions. Also, the non-uniform lithium-ion flux and infinite volume expansion of Li metal cause the growth of Li dendrites. These pose significant safety challenges and cause rapid capacity fading of the lithium metal batteries (LiMBs). To resolve these issues, a low-cost, easily processed, lightweight, high-performance carbon-based porous matrix is considered promising to host Li metal deposition. The three-dimensional (3D) porous nano/microstructured carbon provides sufficient space for Li accommodation during Li plating, buffers the volume changes during Li plating/stripping, and lowers the effective current density contributing to dendrite-free Li deposition. Besides, the outstanding electrochemical and mechanical stability, flexibility and the high electronic conductivity enable the nano/microstructured carbon to serve as both Li host and current collector. The development of 3D carbon/Li composite by mechanical roll-press techniques not only eliminates the complex and risky procedure of making carbon/Li composite based on Li plating or molten Li infusion but also stabilizes the capacity at higher Li plating/stripping rates. Recently, there is an advancement in the lithiophilic decorations of 3D structure to introduce sufficient nucleation sites and the development of artificial SEI on top of the 3D matrix to suppress Li dendrite formation. Such 3D structural modifications create a uniform electric field, lower the Li nucleation overpotential, provide strong mechanical and chemical stability, and stabilize the interface thereby inhibiting the degradation of lithium and the electrolyte. Here we summarize the research progress on porous carbon/Li composites in terms of materials type, structure, fabrication technique, their electrochemical battery performance, and identify the critical challenges that need to be addressed for high-energy-density practical LiMBs.

25 ENERGY STORAGE↗
DOE OSTI2021

Enabling High-Performance NASICON-Based Solid-State Lithium Metal Batteries Towards Practical Conditions

Solid-state lithium metal batteries (SSLMBs) are promising next-generation high-energy rechargeable batteries. However, the practical energy densities of the reported SSLMBs have been significantly overstated due to the use of thick solid-state electrolytes, thick lithium (Li) anodes, and thin cathodes. Here, a high-performance NASICON-based SSLMB using a thin (60 µm) Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 (LAGP) electrolyte, ultrathin (36 µm) Li metal, and high-loading (8 mg cm -2 ) LiFePO 4 (LFP) cathode is reported. The thin and dense LAGP electrolyte prepared by hot-pressing exhibits a high Li ionic conductivity of 1 × 10 -3 S cm -1 at 80 °C. The assembled SSLMB can thus deliver an increased areal capacity of ≈1 mAh cm -2 at C/5 with a high capacity retention of ≈96% after 50 cycles under 80 °C. Furthermore, it is revealed by synchrotron X-ray absorption spectroscopy and in situ high-energy X-ray diffraction that the side reactions between LAGP electrolyte and LFP cathode are significantly suppressed, while rational surface protection is required for Ni-rich layered cathodes. This study provides valuable insights and guidelines for the development of high-energy SSLMBs towards practical conditions.

25 ENERGY STORAGE↗
NASA NTRSDate not supplied

The Wizard Staff: A Mobile Tool Supporting Human Exploration on The Lunar Surface

The Wizard Staff is a rechargeable, battery powered mobile tool with multiple uses for lunar surface exploration. It supports human activity as a surface survey tool, provides external illumination to enhance safety, delivers networking, communications, and navigation features to remote sites, and assists crew rescue with an emergency beacon and rigid splint structure. As a survey tool, it assists crewed geologic field site exploration with external lights, cameras, and LiDAR to illuminate, map, and record the sample collection process. As a relay station, it provides a surface intranet communications and navigation node for extended exploration far from the lander or habitation module. A separately developed Search-and-Rescue (SAR) handheld device can broadcast a signal to the Gandalf Staff containing crew position and biometric data. The staff then formats the message and sends it orbiting satellite(s) for emergency response via the LunaNET on a dedicated frequency similar to terrestrial applications using an Emergency Position-Indicating Radiobeacon (EPIRB). The staff is designed with an upper and lower segment. Components in the upper segment are the LiDAR, external lighting arrays, cameras, communications equipment, intelligence devices, and user interface for crew operations. The lower segment is a set of FeLiPO4 battery cells packed into the 2” diameter carbon fiber tube. When the battery pack is discharged, a spring connector (designed for the dusty lunar environment) easily disconnects the two segments for replacement with another fully charged battery pack. The lower segment can be used for Incapacitated Crew Rescue (ICR) as a rigid splint. As a stand-alone science platform, the Wizard Staff provides infrastructure for instruments and sensors to record the lunar environment over long periods of time. After a crew installs the components on the lunar surface, the platform delivers data to the lunar lander or base station for analysis. The stand-alone mode requires an auxiliary power source (e.g. solar array) and energy storage system (e.g. battery), so it could also be used as an electrical recharging station. A working prototype of Wizard Staff has been developed with collaboration between NASA (JSC, MSFC, and GSFC), Texas Space Technology Applications and Research (T STAR), and Texas A&M University (TAMU) using $300k of innovation funding in FY’21 and FY’22. The functional staff weights 36# on Earth (6# on the Moon), stands 2.1m tall and delivers external lighting with an array of 40 LED bulbs generating 1460 Lux at 2m range (near field), or 2 Lux at 50m (far field).

Gandalf Staff↗
DOE OSTI2023

Rechargeable Micro-Batteries

The quest for efficient power sources for small sensors has led to a growing interest in rechargeable micro-batteries, offering the potential to harness energy from various sources for extended periods. This project delves into a multifaceted project aimed at enhancing the performance and viability of rechargeable micro-batteries in this context. The Pacific Northwest National Laboratory (PNNL) has leveraged its expertise in primary micro-battery development, evolving into a software-driven approach for designing cylindrical micro-batteries. This project addresses the cycle life issue through innovative cell design, electrode optimization, and electrolyte refinement. A case study of the MB1842 rechargeable micro-battery demonstrates the promising outcomes of these advancements, showcasing a capacity of 0.32 mAh at ~1C (0.35 mA) and remarkable cycle performance, extending the cycle life to 510-570 cycles at 80% end-of-life (EOL), 710-760 cycles at 70% EOL and 840-940 cycles at 60% EOL, thereby ensuring a service life of 10 years for these rechargeable micro-batteries. This endeavor represents a significant stride towards unlocking the full potential of rechargeable micro-batteries, paving the way for their widespread application in small sensor technologies. The outcome from this project also successfully supports the award of a new project: 80621 - Self-Powered Modular Acoustic Telemetry System with Sensing.

25 ENERGY STORAGE↗
DOE OSTI2025

Highly Stable and Conductive 1,3‐Dioxolane/Hydrocarbon Based Electrolyte Solvent for Advanced Lithium‐Sulfur Batteries

Abstract Developing effective electrolytes is crucial for boosting the performance of Lithium‐Sulfur (LiS) rechargeable battery. Recent improvements in electrolyte formulations have enhanced cyclability by increasing electrochemical stability at the electrode interfaces. However, achieving both high ionic conductivity (σ) and stability at these interfaces simultaneously remains a significant challenge. In this study, we utilized a strategy to suppress polysulfide dissolution by employing a mixture of 1,3‐dioxolane (DOL) and hydrocarbon solvents with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) electrolyte salt. Compared to the conventional electrolyte solution, which is 1 M LiTFSI salt in a 50/50 vol % mixture of DOL and dimethoxy ethane (DME), the LiTFSI electrolyte with DOL/hydrocarbon solvents demonstrate better cycling stability, compatibility with the Li‐metal anode, and a high specific discharge capacity (Csp). Among the various DOL/hydrocarbon and LiTFSI electrolyte salts, the combination of DOL and n‐hexane, a linear hydrocarbon, with LiTFSI electrolyte salt, (DnH40LiTFSI) exhibits remarkable σ (6.5×10 −3 S/cm at 30 °C), compatibility with the Li‐metal anode, an initial Csp of ca. 1264 mAh/g, cycling stability (Csp and Coulombic efficiency are 811 mAh/g and 98.09 % after 120 cycles) at 0.1 C by forming a good protective layer on the Li‐metal surface and preventing polysulfide dissolution.

Ahmed, Faiz↗
DOE OSTI2022

Lithium halide cathodes for Li metal batteries

Lithium halides cathodes potentially offer a high energy density at a low cost for rechargeable batteries. However, these cathodes suffer from quick capacity decay in organic electrolytes and the failiure mechanism remains elusive. Here, we report that liquefying the halogen or interhalogen compounds is a prerequisite for achieving high reversibility for the lithium halides cathodes. The gas or solid halogen can be liquefied by using interhalogen compounds with different electronegativity or changing the temperature. As a proof of concept, reversible LiCl conversion-intercalation chemistry in organic electrolyte is demonstrated by using either redox coupling with less electronegative I/Br to form liquid ICl/BrCl or reducing the temperature to -30oC. Further, the LiCl-LiBr-graphite cathodes in 1.6M lithium difluoro(oxalato)borate/1.6M lithium triflate in diglyme electrolytes achieve a high reversible specific capacity of 250 mAh/g at 3.7 V with an energy density being comparable to or higher than transition metal oxide cathodes at a much lower cost.

25 ENERGY STORAGE↗