Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Raman scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Real-Time Detection of Hydrogen and Ammonia Isotopologues for Impurity Removal and Recovery of Tritium

To accommodate gas measurements for impurity removal and recovery of tritium, a silver-coated optical or waveguide is employed for collecting Raman scattered signals to determine relative hydrogen and ammonia isotopologue populations in real time. The data and results presented here demonstrate an analytical methodology for the analysis of four ammonia and three hydrogen isotopologues in a hydrogen–deuterium exchange reaction by gas phase Raman spectroscopy. Standard chemometric modeling techniques effectively unravel the signatures of the isotopologues involved observed here; however, a sophisticated quantum chemical approach supports the spectral assignments. An interpretation of the data presented here can emphasize the practicality and reliability of the gaseous monitoring system in complex chemical environments for the hydrogen fuel economy as well as the more distant energy source from a facility that handles tritium. There are still considerable concerns about the measurement of tritium in isotope separation and radiological impurities from gas processing. A common impurity in gas processing is ammonia, which can form readily in the presence of nitrogen and tritium. Substituted ammonia (NQ 3 ), where Q = H, D, or T, is traditionally removed through getters or diffusers along with other non-hydrogen contaminants. A preferable analytical approach is noninvasive and can be deployed for real-time process evaluation in radiological environments.

Ammonia↗

Video-rate Raman-based metabolic imaging by Airy light-sheet illumination and photon-sparse detection

Despite its massive potential, Raman imaging represents just a modest fraction of all research and clinical microscopy to date. This is due to the ultralow Raman scattering cross-sections of most biomolecules that impose low-light or photon-sparse conditions. Bioimaging under such conditions is suboptimal, as it either results in ultralow frame rates or requires increased levels of irradiance. Here, we overcome this tradeoff by introducing Raman imaging that operates at both video rates and 1,000-fold lower irradiance than state-of-the-art methods. To accomplish this, we deployed a judicially designed Airy light-sheet microscope to efficiently image large specimen regions. Further, we implemented subphoton per pixel image acquisition and reconstruction to confront issues arising from photon sparsity at just millisecond integrations. We demonstrate the versatility of our approach by imaging a variety of samples, including the three-dimensional (3D) metabolic activity of single microbial cells and the underlying cell-to-cell variability. To image such small-scale targets, we again harnessed photon sparsity to increase magnification without a field-of-view penalty, thus, overcoming another key limitation in modern light-sheet microscopy.

60 APPLIED LIFE SCIENCES↗

Vibrational modes and crystallographic structure of Cd 3 As 2 and (Cd 1-x Zn x ) 3 As 2 epilayers

Low-temperature Raman scattering is used to study the crystal structure of molecular-beam epitaxially grown layers of the Dirac semimetal Cd 3 As 2 and its related alloy (Cd 1-x Zn x ) 3 As 2 . The combination of narrow-linewidth spectra, multiple growth directions and full polarization analysis allows improved accuracy in identifying the irreducible representation of over 57 Raman-active vibrations. Several disagreements with previous identifications are found. Structurally, the results agree with the centrosymmetric I41/acd space group of bulk-grown Cd 3 As 2 and are clearly distinct from the Raman spectra of nanoscale platelets and wires. Three-fold twinning is seen in (112) Cd 3 As 2 grown on (111) zincblende substrates corresponding to the three possible tetragonal orientations. In dilute (Cd 1-x Zn x ) 3 As 2 , phonons have a frequency and scattering amplitude dependence on Zn concentration that is continuous with Cd 3 As 2 but at least one frequency is absent at the alloy endpoint, preventing a simple one-mode description of the alloy phonon.

36 MATERIALS SCIENCE↗

Significantly increased Raman enhancement on defect-rich O-incorporated 1T-MoS 2 nanosheets

Improving charge transfer is the key to the performance of non-noble metal semiconductor-based surface enhanced Raman scattering (SERS) substrates. In this work, the O-incorporated 1T-MoS 2 nanosheets with rich sulfur defects (ID-MoS 2 ) are obtained by simple calcination of 1T-MoS 2 nanosheets in air atmosphere. Using rhodamine 6G (R6G) as typical probe molecules, ID-MoS 2 nanosheets show ultrahigh Raman enhancement effects with an enhancement factor of 1.24 × 10 7 due to sulfur defects and O incorporation in the 1T-MoS 2 lattice. First-principle density functional theory calculations suggest that the existence of sulfur defects and O incorporation significantly increase the Fermi energy level (E f ) and electronic density of states of ID-MoS 2 . Furthermore, O incorporation can enhance the interactions between the substrate and the adsorbed molecules through electrostatic and hydrogen bonding. All these improve the charge transfer resonance and result in the remarkable SERS activity of ID-MoS 2 nanosheets. This is the first study on the increasing SERS performance of semiconductor substrates by simultaneously employing defect and dopant incorporation. This study provides an approach to optimize the performance of semiconductor-based SERS substrates.

36 MATERIALS SCIENCE↗

Detection of chiral spin fluctuations driven by frustration in Mott insulators

Topologically ordered states, such as chiral spin liquids, have been proposed as candidates that host fraction alized excitations. However, detecting chiral character or proximity to these nontrivial states remains a challenge. Resonant Raman scattering can be a powerful tool for detecting chiral fluctuations, as the 𝐴 2⁢𝑔 channel probes excitations with broken time-reversal symmetry and local chiral order. Here, we use exact diagonalization to characterize the resonant 𝐴 2⁢𝑔 channel, alongside two-magnon scattering in 𝐵 1⁢𝑔 and 𝐸 𝑔 channels, for the Hubbard model on lattices with increasing levels of geometric spin frustration, where tuning the incident energy near the Mott gap reveals strong chiral spin excitation intensity. In conclusion, increased spin frustration in the Mott insulator results in an overall softening of the Raman 𝐴 2⁢𝑔 response, indicating a tendency toward low energy chiral-chiral fluctuations in Mott insulators with magnetic frustration and proximity to chiral spin liquid states that can potentially be tuned by external perturbations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Near-octave lithium niobate soliton microcomb

Thin film lithium niobate (LN) is bringing renewed potential to the realm of integrated photonics. Its strong quadratic and cubic nonlinearities as well as wide transparency window are ideal for realizing on-chip self-referenced soliton microcombs. However, broadband Kerr cavity soliton generation in LN thin films remains challenging due to limited dispersion control and competition from strong stimulated Raman scattering (SRS). Here, we demonstrate the generation of soliton microcombs in LN thin films featuring broad spectral spans up to 4/5 octaves with the emission of dual dispersion waves (2/3 octaves apart) and sub-terahertz repetition rates (down to 335 GHz) by suppressing strong SRS. Numerical simulations based on coupled-mode equations that incorporate Raman effects further elucidate the soliton dynamics in this highly Raman-active material system.

Gong, Zheng (ORCID:0000000301704870)↗

Dynamic fingerprint of fractionalized excitations in single-crystalline Cu3Zn(OH)6FBr

Abstract Beyond the absence of long-range magnetic orders, the most prominent feature of the elusive quantum spin liquid (QSL) state is the existence of fractionalized spin excitations, i.e., spinons. When the system orders, the spin-wave excitation appears as the bound state of the spinon-antispinon pair. Although scarcely reported, a direct comparison between similar compounds illustrates the evolution from spinon to magnon. Here, we perform the Raman scattering on single crystals of two quantum kagome antiferromagnets, of which one is the kagome QSL candidate Cu 3 Zn(OH) 6 FBr, and another is an antiferromagnetically ordered compound EuCu 3 (OH) 6 Cl 3 . In Cu 3 Zn(OH) 6 FBr, we identify a unique one spinon-antispinon pair component in the E 2g magnetic Raman continuum, providing strong evidence for deconfined spinon excitations. In contrast, a sharp magnon peak emerges from the one-pair spinon continuum in the E g magnetic Raman response once EuCu 3 (OH) 6 Cl 3 undergoes the antiferromagnetic order transition. From the comparative Raman studies, we can regard the magnon mode as the spinon-antispinon bound state, and the spinon confinement drives the magnetic ordering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theory of stimulated and spontaneous axion scattering.

We present a theory for nonlinear, resonant excitation of dynamical axions by counterpropagating electromagnetic waves in materials that break both 𝒫 and 𝒯 symmetries. We show that dynamical axions can mediate an exponential growth in the amplitude of the lower frequency (Stokes) beam. We also discuss spontaneous generation of a counterpropagating Stokes mode, enabled by resonant amplification of quantum and thermal fluctuations in the presence of a single pump laser. Remarkably, the amplification can be orders of magnitude larger than that obtained via stimulated Brillouin and Raman scattering processes, and can be modulated with the application of external magnetic fields, making stimulated axion scattering promising for optoelectronics applications.

Smith, M.↗

The Influence of Structural Dynamics in Two-Dimensional Hybrid Organic–Inorganic Perovskites on Their Photoluminescence Efficiency — Neutron Scattering Analysis

Two-dimensional hybrid organic–inorganic perovskites (HOIPs) have emerged as promising materials for light-emitting diode applications. In this study, by using time-of-flight neutron spectroscopy we identified and quantitatively separated the lattice vibrational and molecular rotational dynamics of two perovskites, butylammonium lead iodide (BA)2PbI4 and phenethyl-ammonium lead iodide (PEA) 2 PbI 4 . By examining the corresponding temperature dependence, we found that the lattice vibrations, as evidenced by neutron spectra, are consistent with the lattice dynamics obtained from Raman scattering. We revealed that the rotational dynamics of organic molecules in these materials tend to suppress their photoluminescence quantum yield (PLQY) while the vibrational dynamics did not show predominant correlations with the same. Additionally, we observed photoluminescence emission peak splitting for both systems, which becomes prominent above certain critical temperatures where the suppression of PLQY begins. This study suggests that the rotational motions of polarized molecules may lead to a reduction in exciton binding energy or the breaking of degeneracy in exciton binding energy levels, enhancing non-radiative recombination rates, and consequently reducing photoluminescence yield. These findings offer a deeper understanding of fundamental interactions in 2D HOIPs and could guide the design of more efficient light-emitting materials for advanced technological applications.

Rajeev, Haritha Sindhu [Univ. of Virginia, Charlot↗

First Results from the Thomson Scattering Diagnostic on the Large Plasma Device

We present the first Thomson scattering measurements of electron density and temperature in the Large Plasma Device (LAPD), a 22 m long magnetized linear plasma device at the University of California Los Angeles (UCLA). The diagnostic spectrally resolves the Doppler shift imparted on light from a frequency-doubled Nd:YAG laser when scattered by plasma electrons. A fiber array coupled to a triple-grating spectrometer is used to obtain high stray light rejection and discriminate the faint scattering signal from a much larger background. In the center of the plasma column, the measured electron density and temperature are about ne≈1.5×1013 cm−3 and Te≈ 3 eV, respectively, depending on the discharge parameters and in good agreement with Langmuir probe data. Optical design considerations to maximize photon count while minimizing alignment sensitivity are discussed in detail and compared to numerical calculations. Raman scattering off of a quartz crystal probe is used for an absolute irradiance calibration of the system.

Kaloyan, Marietta (ORCID:0000000182593038)↗

Response of vibrational properties and thermal conductivity of perovskites to pressure

We study the response of SrTiO 3 and KTaO 3 's vibrational properties and thermal conductivity to pressurization. Our goal is to improve the understanding of the relationship between crystal structure, vibrational dynamics, and thermal conductivity in perovskites. We measure the thermal conductivity of SrTiO 3 and KTaO 3 up to 28 GPa by time-domain thermoreflectance. We also perform Raman scattering and stimulated Brillouin scattering measurements of SrTiO 3 and KTaO 3 to characterize changes in vibrational dynamics with pressure. The thermal conductivity of SrTiO 3 increases under pressure with a slope comparable to that of other perovskites whose thermal conductivity has been measured versus pressure. Alternatively, the thermal conductivity of KTaO 3 has a stronger pressure dependence than that of other materials with similar crystal structure. We correlate pressure-induced changes in Raman and Brillouin spectra with pressure-induced changes in thermal conductivity. We show that pressure-induced changes in phonon lifetimes dominate the pressure dependence of thermal conductivity. This study provides benchmark knowledge of why depends on pressure and improves understanding of structure/thermal-property relationships.

36 MATERIALS SCIENCE↗

Phonon excitations in Eu 2 Ir 2 O 7 probed by inelastic x-ray scattering

The study of phonon dynamics and its interplay with magnetic ordering is crucial for understanding the unique quantum phases in the pyrochlore iridates. Here, through inelastic x-ray scattering on a single crystal sample of the pyrochlore iridate Eu 2 Ir 2 O 7 , we map out the phonon excitation spectra in Eu 2 Ir 2 O 7 and compare them with the theoretical phonon spectra calculated using the density functional theory. Further, possible phonon renormalization across the magnetic long-range order transition is observed in our experiments, which is consistent with the results of the previous Raman scattering experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser-plasma instabilities in long scale-length plasmas relevant to shock-ignition

We present 2D particle-in-cell simulations of laser-plasma instabilities (LPI) performed using conditions relevant to experiments on the OMEGA and NIF laser facilities. The laser intensity used is 2×10 15 W cm -2 , which allows comparison with previous experiments and simulations investigating shock ignition, though this is a relatively low intensity for the scheme. We find that the large convective gain of the instabilities leads to dynamics that are largely controlled by pump depletion and to scattering or absorption by LPIs predominantly occurring away from the quarter-critical density. The two-plasmon decay (TPD) instability is dominant for OMEGA-type conditions and remains important at the NIF-scale. In both cases, most absorption from TPD occurs near its Landau cutoff density, and we examine its nonlinear dynamics in this region, focusing on the ion-acoustic waves responsible for saturation. For NIF-type conditions, stimulated Raman scattering (SRS) and stimulated Brillouin scattering divert significant fractions of laser energy, and we find that SRS backscatter can occur with high gain at low densities due to kinetic effects. An in-depth analysis of hot-electron production is performed to identify the main sources and their characteristic electron temperature. For both simulations presented, the overall hot-electron temperature lies between 30 and 35 keV. This is relatively low and will likely increase shock pressure; however, the distributions also contain a significant number of high-energy (E k >100 keV) electrons that would likely cause unacceptable preheat. We, therefore, suggest some strategies that may be utilized to minimize this high-energy component. I. INTROD

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation of gamma radiation by a subterawatt ultrashort laser pulse: optimisation of preplasma and pulse duration

We report an experimental and numerical study of the acceleration of electrons in a plasma interacting with a subterawatt laser pulse (intensity of ∼3 × 10{sup 18} W cm{sup −2} at a pulse duration of 50 fs). A preplasma layer on the surface of a molybdenum target is formed by an additional laser pulse with a duration of 8 ns and an intensity of ∼2 × 10{sup 12} W cm{sup −2}. It is shown that an increase in the laser pulse duration to 1700 fs at a constant energy (and a proportional decrease in intensity) leads to an increase in the yield of bremsstrahlung γ-radiation by more than an order of magnitude when the nanosecond pulse is ahead of the femtosecond one by 15 − 25 ns. Interferometry data and results of diagnostics of optical and γ-radiation of a plasma demonstrate that the collisional ionisation of atoms by electrons oscillating in the field of such a laser pulse plays an essential role in the formation of electron density profile. The sensitivity of the described effect to the level of amplified spontaneous emission is determined, despite the nanosecond pulse impact. Numerical simulations show that at a large pulse duration, the acceleration of electrons is stipulated by the beaking of plasma waves excited during stimulated Raman scattering of laser radiation. (paper)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatially resolved multimodal vibrational spectroscopy under high pressures

In this perspective, we discuss the potential impact on in situ studies under controlled environments of a novel multimodal spectroscopic technique, optical photothermal infrared + Raman spectroscopy, which enables the simultaneous collection of infrared and Raman scattering spectra, along with hyperspectral imaging and chemical imaging with wavelength-independent sub-500 nm spatial resolution. A brief review of the current literature regarding the O-PTIR technique is presented along with recent work from our own lab on determining the crystallinity of soft and inorganic materials. The results highlight the possibility of resolving differences in the crystallinity of soft materials associated with changes in material processing. Here, we also demonstrate the first reported use of a diamond anvil cell with simultaneous infrared and Raman measurements that showcases, using a high energy material as an example, the potential use of O-PTIR spectroscopy in diamond anvil cell techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vibrational properties of CuInP 2 S 6 across the ferroelectric transition

In order to explore the properties of a two-sublattice ferroelectric, we measured the infrared and Raman scattering response of CuInP 2 S 6 across the ferroelectric and glassy transitions and compared our findings to a symmetry analysis, calculations of phase stability, and lattice dynamics. In addition to uncovering displacive character and a large hysteresis region surrounding the ferroelectric transition temperature T C , we identify the vibrational modes that stabilize the polar phase and confirm the presence of two ferroelectric variants with opposite polarizations. Below T C , a poorly understood relaxational or glassy transition at T g is characterized by local structure changes in the form of subtle peak shifting and activation of low frequency out-of-plane Cu- and In-containing modes. Here, the latter are due to changes in the Cu/In coordination environments and associated order-disorder processes. Moreover, T g takes place in two steps with another large hysteresis region and significant underlying scattering. Combined with imaging of the room temperature phase separation, this effort lays the groundwork for studying CuInP 2 S 6 under external stimuli and in the ultrathin limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Confocal Raman Microscopy Investigation of Phospholipid Monolayers Deposited on Nitrile-Modified Surfaces in Porous Silica Particles

Phospholipid bilayers deposited on a variety of surfaces offer models for investigation of the lipid membrane structure and supports for biocompatible sensors. Hybrid-supported phospholipid bilayers (HSLBs) are stable membrane models for these investigations, typically prepared by self-assembly of a lipid monolayer over an n-alkane-modified surface. HSLBs have been prepared on n-alkyl chain-modified silica and used for lipophilicity-based chromatographic separations. The structure of these hybrid bilayers differs from vesicle membranes where the lipid head group spacing is greater due to interdigitation of the lipid acyl chains with the underlying n-alkyl chains bound to the silica surface. This interdigitated structure exhibits a broader melting transition at a higher temperature due to strong interactions between the lipid acyl chains and the immobile n-alkyl chains bound to silica. In the present work, we seek to reduce the interactions between a lipid monolayer and its supporting substrate by self-assembly of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) on porous silica functionalized with nitrile-terminated surface ligands. The frequency of Raman scattering of the surface -C≡N stretching mode at the lipid–nitrile interface is consistent with an n-alkane-like environment and insensitive to lipid head group charge, indicating that the lipid acyl chains are in contact with the surface nitrile groups. The head group area of this lipid monolayer was determined from the within-particle phospholipid concentration and silica specific surface area and found to be 54 ± 2 Å 2 , equivalent to the head group area of a DMPC vesicle bilayer. The structure of these nitrile-supported phospholipid monolayers was characterized below and above their melting transition by confocal Raman microscopy and found to be nearly identical to DMPC vesicle bilayers. Their narrow gel-to-fluid-phase melting transition is equivalent to dispersed DMPC vesicles, indicating that the acyl chain structure on the nitrile support mimics the outer leaflet structure of a vesicle membrane.

36 MATERIALS SCIENCE↗