Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ROSE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Understanding the heat generation mechanisms and the interplay between joule heat and entropy effects as a function of state of charge in lithium-ion batteries

The thermal performance of lithium-ion battery cells is critical for ensuring their safe and reliable operation across various applications. In this study, we employed an isothermal calorimetry method to investigate the heat generation of commercial 18650 lithium-ion battery fresh cells during charge and discharge at different current rates, ranging from 0.05C to 0.5C, and across various temperatures: 20 °C, 30 °C, 40 °C, and 50 °C. Our findings revealed a direct correlation between heat generation and current rates, indicating that higher current rates lead to increased heat generation within the cells. Conversely, we observed that heat generation remained relatively stable as the temperature rose, suggesting that temperature changes within this range may not significantly impact the heat generation of fresh cells during typical operations. Furthermore, our study explored irreversible heat generation, which depends on the applied current and overpotential, using the galvanostatic intermittent titration technique at 0.05C–0.5C and 30 °C. Additionally, electrochemical impedance spectroscopy was performed on the same cells during charge and discharge at 20 °C, 30 °C, and 40 °C to analyze cell impedance. Finally, our results indicated a consistent dependence of impedance on the state of charge and depth of discharge, with a significant increase in impedance observed at the end of the discharge process.

25 ENERGY STORAGE↗

Preparation of ZnO:CeO{sub 2-x} thin films by AP-MOCVD: Structural and optical properties

The growth of columnar CeO{sub 2}, ZnO and ZnO:CeO{sub 2-x} films on quartz and AA6066 aluminum alloy substrates by economic atmospheric pressure metal-organic chemical vapor deposition (AP-MOCVD) is reported. A novel and efficient combination of metal acetylacetonate precursors as well as mild operating conditions were used in the deposition process. The correlation among crystallinity, surface morphology and optical properties of the as-prepared films was analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM) and UV-vis spectroscopy. The synthesized films showed different crystallographic orientations depending on the ZnO and CeO{sub 2} lattice mismatch, cerium content and growth rate. The CeO{sub 2} films synthesized in this work showed plate-like compact structures as a result of the growth process typical of CVD. Both pure and ZnO:CeO{sub 2-x} films were obtained with a hexagonal structure and highly preferred orientation with the c-axis perpendicular to both substrates under the optimal deposition conditions. The microstructure was modified from dense, short round columns to round structures with cavities ('rose-flower-like' structures) and the typical ZnO morphology by controlling the cerium doping the film and substrate nature. High optical transmittance (>87%) was observed in the pure ZnO films. As for the ZnO:CeO{sub 2-x} films, the optical transmission was decreased and the UV absorption increased, which subsequently was affected by an increase in cerium content. This paper assesses the feasibility of using ZnO:CeO{sub 2-x} thin films as UV-absorbers in industrial applications. - Graphical abstract: TEM micrographs and their corresponding SAED pattern obtained for the as-deposited ZnO-CeO{sub 2-x} thin films for a Zn/Ce metallic ratio 16:9.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Luminescent nanocrystals in the rare-earth niobate–zirconia system formed via hydrothermal method

Luminescent nanocrystals based on the rare-earth niobates (Ln{sub 3}NbO{sub 7}, Ln=Y, Eu) and zirconia (ZrO{sub 2}) that were composed of 50 mol% Ln{sub 3}NbO{sub 7} and 50 mol% ZrO{sub 2}, were hydrothermally formed as cubic phase under weakly basic conditions at 240 °C. The lattice parameter of the as-prepared nanoparticles corresponding to the composition of Y{sub 3−x}Eu{sub x}NbO{sub 7}–4ZrO{sub 2} that was estimated as a single phase of cubic gradually increased as the content of europium x increased. The existence of small absorbance peaks at 395 and 466 nm corresponding to the Eu{sup 3+7}F{sub 0}→{sup 5}L{sub 6}, and {sup 7}F{sub 0}→{sup 5}D{sub 2} excitation transition, respectively, was clearly observed in the diffuse reflectance spectra of the as-prepared samples containing europium. The optical band gap of the as-prepared samples was in the range from 3.5 to 3.7 eV. The photoluminescence spectra of the as-prepared nanocrystals containing europium showed orange and red luminescences with main peaks at 590 and 610 nm, corresponding to {sup 5}D{sub 0}→{sup 7}F{sub 1} and {sup 5}D{sub 0}→{sup 7}F{sub 2} transitions of Eu{sup 3+}, respectively, under excitation at 395 nm Xe lamp. The emission intensity corresponding to {sup 5}D{sub 0}→{sup 7}F{sub 2} transition increased as heat-treatment temperature rose from 800 to 1200 °C. - Graphical abstract: This graphical abstract shows the excitation and emission spectra and a transmission electron microscopy image of nanocrystals (with composition based on the rare-earth niobates (Ln{sub 3}NbO{sub 7}, Ln=Y, Eu) and zirconia (ZrO{sub 2}) that were composed of 50 mol% Ln{sub 3}NbO{sub 7} and 50 mol% ZrO{sub 2}) formed via hydrothermal route. Display Omitted - Highlights: • Nanocrystals composed of 50 mol% Y{sub 3−x}Eu{sub x}NbO{sub 7} and 50 mol% ZrO{sub 2} was directly formed. • The nanocrystals were hydrothermally formed under weakly basic conditions at 240 °C. • The Y{sub 3}NbO{sub 7} showed an UV-blue and broad-band emission under excitation at 240 nm. • The emission is originated from the niobate octahedral group [NbO{sub 6}]{sup 7−}. • The nanocrystals showed orange and red luminescences ({sup 5}D{sub 0}→{sup 7}F{sub 1} and {sup 5}D{sub 0}→{sup 7}F{sub 2} , Eu{sup 3+})

36 MATERIALS SCIENCE↗

Influence of Sm{sup 3+} ions on structural, optical and solar light driven photocatalytic activity of spinel MnFe{sub 2}O{sub 4} nanoparticles

In this article, co-precipitation method was used to produce a series of samarium substituted manganese ferrite nanoparticles, MnFe{sub 2−x}Sm{sub x}O{sub 4} (x = 0.0, 0.5, 1.0, 1.5, 2.0) with oleic acid as surfactant. The effect of Sm{sup 3+} substitution and calcination temperature on the MnFe{sub 2}O{sub 4} was explored. The MnFe{sub 2−x}Sm{sub x}O{sub 4} sample calcinated at 973 K induced an enhanced optical behaviour. The influence of Sm{sup 3+} ions on cationic distribution and optical properties of MnFe{sub 2}O{sub 4} were probed by various physicochemical techniques. The presence of secondary orthorhombic (SmFeO{sub 3}) phase with initial cubic phase was confirmed by doublet peak in the X-ray diffraction pattern. The particle size distribution of MnFe{sub 0.5}Sm{sub 1.5}O{sub 4} sample was about 40 nm from HRTEM. The visible light absorption ability extended as Sm content was increased up to x = 1.5 in MnFe{sub 2}O{sub 4}. At an optimum concentration of Sm as x = 1.5 in MnFe{sub 2}O{sub 4}, photocatalyst exhibited decrease in energy band gap (1.64 eV); as a result effective visible light driven photocatalytic activity was achieved than the pure MnFe{sub 2}O{sub 4}. The MnSm{sub 1.5}Fe{sub 0.5}O{sub 4} sample exhibits pronounced photodegradation towards Rose Bengal with in 50 min under direct sunlight illumination as energy input. The broad emission band is observed in the entire photoluminescence (PL) spectrum. Current study provides an excellent competency of rare earth substituted ferrite as a new class of photocatalyst and they found to be a beneficial in the field of environmental cleaning application. - Highlights: • MnSm{sub x}Fe{sub 2−x}O{sub 4} nanoparticles were synthesised by co-precipitation method. • The insertion of Sm{sup 3+} ion in the MnFe{sub 2}O{sub 4} spinel matrix shows an increase in lattice parameter. • The calcination temperature is sensitive knob for tuning the optical properties of the MnFe{sub 2−x}Sm{sub x}O{sub 4} photocatalyst. • The MnFe{sub 2−x}Sm{sub x}O{sub 4} calcinated at 973 K shows enhanced optical behaviour. • The composition MnFe{sub 0.5}Sm{sub 1.5}O{sub 4} showed substantial red shift in absorption edge with narrow band gap of 1.64 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relationship between morphologies and orientations of Cu{sub 6}Sn{sub 5} grains in Sn3.0Ag0.5Cu solder joints on different Cu pads

The morphologies and orientations of Cu{sub 6}Sn{sub 5} intermetallic compounds in the Sn3.0Ag0.5Cu solder joints both on polycrystalline and single crystal Cu pads under different peak reflow temperatures and times above liquids were investigated. The relationship between Cu{sub 6}Sn{sub 5} grain orientations and morphologies was clarified. At the interface of Sn3.0Ag0.5Cu/polycrystalline Cu pad, scalloped Cu{sub 6}Sn{sub 5} intermetallic compounds formed at 250 °C and roof shape Cu{sub 6}Sn{sub 5} formed at 300 °C. Both scalloped Cu{sub 6}Sn{sub 5} and roof shape Cu{sub 6}Sn{sub 5} had a preferred orientation of (0001) plane being parallel to polycrystalline Cu pad surface. Besides, the percentage of large angle grain boundaries increased as the peak reflow temperature rose. At the interface of Sn3.0Ag0.5Cu/(111) single crystal Cu pad, the Cu{sub 6}Sn{sub 5} intermetallic compounds were mainly scallop-type at 250 °C and were prism type at 300 °C. The prismatic Cu{sub 6}Sn{sub 5} grains grew along the three preferred directions with the inter-angles of 60° on (111) single crystal Cu pad while along two perpendicular directions on (100) single crystal Cu pad. The orientation relationship between Cu{sub 6}Sn{sub 5} grains and the single crystal Cu pads was investigated by electron backscatter diffraction technology. In addition, two types of hollowed Cu{sub 6}Sn{sub 5} intermetallic compounds were found inside the joints of polycrystalline Cu pads. The long hexagonal Cu{sub 6}Sn{sub 5} strips were observed in the joints reflowing at 250 °C while the hollowed Cu{sub 6}Sn{sub 5} strips with the ‘▪’ shape cross-sections appeared at 300 °C, which was attributed to the different grain growth rates of different Cu{sub 6}Sn{sub 5} crystal faces. - Highlights: • The orientation of interfacial Cu{sub 6}Sn{sub 5} grains was obtained by EBSD technology. • Two types of hollowed Cu{sub 6}Sn{sub 5} strips were found at different temperatures. • The formation mechanism of hollowed Cu{sub 6}Sn{sub 5} was elaborated based on Bravais law. • The relationship between Cu{sub 6}Sn{sub 5} grain orientations and morphologies was clarified.

36 MATERIALS SCIENCE↗

A comparative research on bobbin tool and conventional friction stir welding of Al-Mg-Si alloy plates

Highlights: • 6061-T4 Al plates were successfully welded by both BT-FSW and C-FSW processes. • A wide welding parameter window was achieved with bobbin tool. • BT-FSW joints showed good strength similar to that of C-FSW joints. • Proving that an Isothermal Dissolution Layer Theory also apply to BT-FSW - Abstract: In our work, Al-Mg-Si (6061Al -T4) plates of 6 mm thickness were subjected to bobbin tool friction stir welding (BT-FSW) and conventional friction stir welding (C-FSW) for comparison. How the welding process affects the microstructure and mechanical properties was investigated at various rotation rates and welding speeds. The results showed that butt FSW joints with high quality could be produced at the selected parameters. The joint strength rose with enhanced welding speed and was nearly independent of the rotation rate in both the welding processes. The strength of the joints produced with BT-FSW reached the same level as that of the C-FSW. The maximum joint strength of 229 MPa was 93% of the base material (BM), which is superior to the reported results of 60–80% for the T4 condition. The fracture position of most of the joints was in the heat-affected zone (HAZ), which is the lowest hardness zone.

36 MATERIALS SCIENCE↗

Microstructure characterization and thermal stability of TC11/Ti2AlNb joints during thermal exposure

Highlights: • Mechanical properties of TC11/Ti{sub 2}AlNb deteriorate due to coarsening of O and α{sub s}. • Thermal stability of α{sub s} phase is lower than that of O phase during exposure. • A relationship was found between the reduction of area and phase thickness. - Abstract: TC11/Ti{sub 2}AlNb welding joints undergoing hot deformation were thermally exposed at the range of 500–700 °C for 100, 200 and 500 h. In present research, typical microstructures of five different zones of the joints were investigated, fusion zone, two interfaces and two base alloys included. The microstructures of fusion zone, Ti{sub 2}AlNb-based alloy and the interface between them were characterized by the coarsening of O phase during thermal exposure, while those of TC11 alloy and the interface between it and fusion zone featured the coarsening of α{sub s} phase. The transformation from B2 to β and O phase was stifled below 600 °C and Ti{sub 2}AlNb-based alloy thus was verified to be stable at this temperature range. α{sub s} phase was stable during exposure at 500 °C. When exposed above 600 °C, α{sub s} phase coarsened by at least 52% with the extension of holding time. Due to the low thermal stability of α{sub s} phase compared with that of O phase, the fracture position of the samples tested at room temperature moved from fusion zone to TC11 alloy when temperature rose. In spite of different thermal exposure conditions, the samples tested at 300 and 500 °C all fractured at TC11 alloy for the severe coarsening of α{sub s} phase. The decrease of interfacial area resulting from the coarsening of O and α{sub s} phases facilitated the dislocation slipping and the strength of joints thus deteriorated. The mechanical properties of TC11/Ti{sub 2}AlNb joints measured at room temperature, 300 and 500 °C were all correlated with the lamellar thickness of O and α{sub s} phases.

36 MATERIALS SCIENCE↗

Template-free synthesis of ZnWO{sub 4} powders via hydrothermal process in a wide pH range

ZnWO{sub 4} powders with different morphologies were fabricated through a template-free hydrothermal method at 180 {sup o}C for 8 h in a wide pH range. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible and luminescence spectrophotometers were applied to study the effects of pH values on crystallinity, morphology, optical and luminescence properties. The XRD results showed that the WO{sub 3} + ZnWO{sub 4}, ZnWO{sub 4}, and ZnO phases could form after hydrothermal processing at 180 {sup o}C for 8 h with the pH values of 1, 3-11, and 13, respectively. The SEM and TEM observation revealed that the morphological transformation of ZnWO{sub 4} powders occurred with an increase in pH values as follows: star anise-, peony-, and desert rose-like microstructures and soya bean- and rod-like nanostructures. The highest luminescence intensity was found to be in sample consisting of star anise-like crystallites among all the samples due to the presence of larger particles with high crystallinity resulted from the favorable pH under the current hydrothermal conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effects of re-firing process under oxidizing atmosphere and temperatures on the properties of strontium aluminate phosphors

Graphical abstract: The comparative emission spectra of standard and re-fired Phosphor A under oxidizing atmosphere at various temperatures. The colour of Phosphor A re-fired at higher temperatures above 900 °C shifted from yellowish-green to bluish-green in the dark. But, the bluish-green emission could only be seen when it was exposed to UV and disappeared as soon as the light source was removed. Moreover, the emission intensities decreased as the re-firing temperatures increased. This could be attributed to the oxidation of Eu{sup 2+} during the re-firing process. It is well known fact from the literature that the reduction of Eu{sup 3+} to Eu{sup 2+} in appropriate host materials needs an annealing process in a reducing atmosphere such as H{sub 2}, H{sub 2}/N{sub 2} mixture or CO. Up to now, the reduction phenomena of Eu{sup 3+} → Eu{sup 2+} in air have been found in phosphates (Ba{sub 3}(PO{sub 4}){sub 2}:Eu), sulphates (BaSO{sub 4}:Eu), borates (SrB{sub 4}O{sub 7}:Eu, SrB{sub 6}O{sub 10}:Eu and BaB{sub 8}O{sub 13}:Eu) and aluminates (Sr{sub 4}Al{sub 14}O{sub 25}:Eu). Interestingly, an apparent blue shift in the phosphorescence spectrum was observed in the samples re-fired at 1000 °C and above, indicating a minimal effect on the oxidation state or the electronic energy levels of the co-doped Dy{sup 3+} ions, which were thought to act as long-lived hole traps resulting in long afterglow. - Highlights: • This study examines the effects re-firing at oxidizing atmosphere of photoluminescence of three different commercial SrAl{sub 2}O{sub 4}:Eu{sup 2+},Dy{sup 3+}-phosphors. • All the commercial SrAl{sub 2}O{sub 4}:Eu{sup 2+},Dy{sup 3+}-phosphors completely lost their phosphorescence after being re-fired at 1300 °C. • Oxidizing environment and re-firing temperature naturally affecting the valance of Eu{sup 2+} may cause the basic lattice structure to be modified and also limit their applications at higher temperatures, such as third firing vetrosa décor or glaze applications in ceramic industry. • It was thought that this kind of study may be promising to provide many outcome studies, may act to encourage additional efforts along these lines. - Abstract: Inorganic phosphorescent pigments have a very wide application, consisting of ceramic decoration and glazes. Therefore, in the present study 3 different commercially available strontium aluminate phosphors (coded Phosphor A, B and C) emitting yellowish-green light were investigated to determine their behaviour when re-fired under oxidizing atmosphere. The phosphors were re-fired at 10 different temperatures and consequent effects were studied. All the samples were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), laser particle size, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and fluorescence spectrometer analysis. It was found that firing them under oxidizing atmosphere strongly affected their phosphorescence abilities especially over 800–900 °C, because doped europium ions (Eu{sup 2+}) in their structures are oxidized to Eu{sup 3+}. It was also concluded that the phosphor powders clumped as the temperature rose, leading to their particle size distributions to change.

36 MATERIALS SCIENCE↗

Effects of TiO{sub 2} film thickness on photovoltaic properties of dye-sensitized solar cell and its enhanced performance by graphene combination

Graphical abstract: - Highlights: • DSSC based on TiO{sub 2} film with 8 printing layers showed the highest efficiency. • The photoelectric conversion efficiency of the DSSC increased from 5.52% to 6.49% by graphene combination. • A mechanism for the enhanced performance of the DSSC was proposed. - Abstract: Dye-sensitized solar cells based on TiO{sub 2} films with different printing layers (6-10) were fabricated by screen printing method. The prepared samples were characterized by scanning electron microscopy, X-ray diffraction and UV–vis absorption spectroscopy. The effects of thickness on the photoelectric conversion performance of the as-fabricated DSSCs were investigated. An optimum photoelectric conversion efficiency of 5.52% was obtained in a DSSC with 8 printing layers. Furthermore, after a moderate amount of graphene was combined with TiO{sub 2}, the photoelectric conversion efficiency of the DSSC based on graphene/TiO{sub 2} composite film rose from 5.52% to 6.49%, with an increase of η by 17.6%. The results indicated that graphene not only enhances the transport of electrons from the film to the fluorine doped tin oxide substrates and reduces the charge recombination rate, but also reduces the electrolyte–electrode interfacial resistance, clearly increasing the photoelectric conversion efficiency.

36 MATERIALS SCIENCE↗

Mn-substituted cerium oxide nanostructures and their magnetic properties

Highlights: • Mn{sub x}Ce{sub 1-x}O{sub 2} (0.1 ≤ x ≤ 0.5) nanostructures were prepared by one step microwave refluxing method. • The saturation magnetization values for the samples rose with increased Mn content. • The oxygen vacancies inherently played crucial role in increasing the magnetization values. - Abstract: In this study, we report the magnetic properties of nanostructured Mn{sub x}Ce{sub 1-x}O{sub 2} (0 0.1 ≤ x ≤ 0.5) materials, synthesized via microwave refluxing technique. Phase purity of the samples was investigated using the structural characterization techniques such as X-ray diffraction (XRD) and transmission electron microscopy (TEM). These analyses indicated the substitution of Ce-ions with Mn-ions in the lattice. The progressive increase in the oxygen vacancies with increased dopant concentration was demonstrated by Raman, UV–vis and photoluminescence spectroscopic studies. X-ray photoelectron spectroscopy analysis further supported the presence of Mn{sup 2+}, Ce{sup 3+} and Ce{sup 4+} ions as well as oxygen vacancies in the samples. The Mn substituted CeO{sub 2} nanostructures were found to exhibit room temperature ferromagnetism (RTFM). There was a continuous improvement in the saturation magnetization (M{sub S}) values with increased Mn concentration. This might be due to the prevalence of surface oxygen vacancies and the systematic rise in their concentration with increased dopant content.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Covalent organic frameworks (COFs)-incorporated thin film nanocomposite (TFN) membranes for high-flux organic solvent nanofiltration (OSN)

This paper reports a new class of thin film nanocomposite (TFN) membranes incorporated with covalent organic frameworks (COFs) nanoparticles in the polyamide skin layer and having enhanced solvent (ethanol) permeation flux and high solute rejection for organic solvent nanofiltration (OSN). These OSN membranes were prepared via interfacial polymerization of m-phenylenediamine (MPD) and trimesoyl chloride with the presence of COFs nanoparticles in the MPD aqueous solution, followed by chemical crosslinking and solvent activation. The prepared TFN membranes exhibited an improved surface hydrophilicity and a decreased skin layer thickness, which leading to a 46.7% increment in the ethanol permeance (up to 79.8 L m –2 h –1 MPa –1 ) compared to those COFs-free membranes, as well as an increased Rhodamine B (479 Da) rejection (up to 99.4%). Moreover, our prepared TFN OSN membranes exhibited an excellent solvent resistance after being statically immersed in N, N-dimethylformamide (DMF) at ambient temperature over 100 days, and after being consecutively cross-flow filtrated using Rose Bengal/DMF solution at ambient temperature over 7 days, both with no significant changes in the separation performance. Moreover, they showed only minor decrease in flux and rejection after being statically immersed in DMF at 80 °C over 14 days, which provides a strong potential in OSN applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amino-functionalized graphene quantum dots (aGQDs)-embedded thin film nanocomposites for solvent resistant nanofiltration (SRNF) membranes based on covalence interactions

Solvent resistant nanofiltration (SRNF) membranes are highly demanded in processing organic solutions especially those contain large molecules with molecular weight between 200 to 2000 Da, yet they have some drawbacks such as relatively poor solvent resistance and low solvent permeance. The current work presented an innovative class of amino-functionalized graphene quantum dots (aGQDs) embedded thin film nanocomposites (TFN) for SRNF membranes which were prepared via interfacial polymerization (IP) and subsequent steps (chemical imidization, crosslinking, and solvent activation). The prepared membranes enabled covalent interactions not only between the IP skin layer and the substrate, but also between the IP layer and the embedded aGQDs. The ethanol permeance and surface porosity increased by 44% and 69%, respectively, with the embedment of aGQDs under the optimal conditions, while the Rhodamine B (RDB, 479 Da) rejection maintained essentially stable above 99%. Furthermore, our novel membranes exhibited excellent long-term stability, with a rejection of over 99% for Rose Bengal (RB, 1017 Da) during the continuous filtration of 100 mg L -1 RB/N,N-dimethyl formamide (DMF) solution at room temperature for more than 768 h. They also exhibited good organic solvent resistance and high-temperature tolerance in both DMF and NMP solvents, with a RDB rejection of over 99% and an ethanol permeance of about 38 L m -2 h -1 MPa -1 after being immersed in DMF at 80 °C for 248 h, and a RDB rejection of over 99% and an ethanol permeance of about 41 L m -2 h -1 MPa -1 after being immersed in NMP at 80 °C for 232 h. The results demonstrated that the aGQDs-embedded TFN OSN membrane has vast potential in SRNF applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel ammonia recovery from anaerobic digestion by integrating biogas stripping and gypsum absorption

Recovering ammonia from anaerobic digestion (AD) effluent offers the opportunity to produce a renewablefertilizer and reduce environmental impact. A novel process developed for such an application was evaluatedduring this study. The feature of the process is integrating biogas stripping and gypsum (CaSO 4 •2H 2 O) absorption. The result revealed that the lower CO 2 content and the absorption temperature contributed the higherefficiency of ammonia recovery. The gypsum solution recovered around 95% of the stripped ammonia when thestripping gas contained 10% CO 2 and it rose to 100% when the gas contained more than 30% CO 2 . Furthermore,a statistical model and genetic algorithm were applied to estimate the total ammonia recovery and optimize theoperating parameters. The experimental and modeling results indicated that integrating biogas stripping withgypsum absorption can effectively harvest ammonia nitrogen and reduce CO 2 emissions while producing(NH 4 ) 2 SO 4 fertilizer from AD effluent.

59 BASIC BIOLOGICAL SCIENCES↗

Geothermal district energy systems coupled with seasonal underground thermal energy storage: a U.S. techno-economic screening by climate and geology

In the United States, cooling-dominated commercial building loads can cause geothermal heat pump-based district energy systems to accumulate a long-term subsurface thermal imbalance, motivating the incorporation of seasonal underground thermal energy storage. We developed a transferable workflow to evaluate geothermal district systems that pair ground heat exchangers with seasonal underground thermal energy storage. Using standardized hourly loads for seven commercial buildings and a uniform cost framework, we simulated ten U.S. cities with a physics-based ground heat exchanger model, subsurface storage simulations, and economic assessment to isolate the roles of climate and hydrogeology. In cooling-dominated cities, underground thermal energy storage supplied the majority of annual cooling, cutting electricity use and summer peaks substantially while achieving levelized costs comparable to or below conventional chiller-boiler plants. In cooler climates, the storage share shrunk, required borefield size and costs rose, and levelized cost of energy increased nearly linearly with declining underground thermal energy storage fraction, indicating storage fraction as the primary economic lever. Sensitivity analysis showed capital risk dominated by borefield drilling and surface heating, ventilation, and air-conditioning and piping, with underground thermal energy storage costs secondary. This workflow provides a transparent foundation for site-specific design and screening of next-generation geothermal district energy systems.

25 ENERGY STORAGE↗

Optimizing aluminum oxide passivation layers—Laser-induced plasmas for layer formation, real-time diagnostics, and layer evaluation

Molten salts have beneficial thermophysical and electrolytic properties, but the aggressive nature of molten salts requires corrosion mitigation strategies, such as structural material surface treatment. In this study, a laser-induced breakdown spectroscopy (LIBS) system was used to simultaneously ablate and monitor de-excitation spectra to form and identify dense alumina passivation layers. Additionally, high-frequency (kHz) LIBS imaging allowed rapid elemental mapping and depth profiling for surface O/Al ratios via minimally destructive analysis. The paired t-test rejected the null hypothesis that air and Ar cover gases were equivalent (p = 0.00012), and the analysis of variance (ANOVA) showed that overlap between shots (p = 0.03112) and cover gas flow rate (p = 0.02729) were statistically significant. At 75% overlap, the O/Al ratio increased to 10% ± 2%, and 90% overlap rose further to 31% ± 2%. Regardless of overlap, tuning the gas flow from 0.5 to 2.5 L min −1 enhanced the O/Al ratio by 24% ± 4%. LIBS depth profiling showed a 3× increase in layer thickness from 75% to 90% overlap. Molecular band peaks of AlO, a precursor to Al 2 O 3 found during treatment, suggest that band intensity could be used for real-time Al 2 O 3 optimization. Ultimately, by adjusting laser spot overlap and cover gas flow rate, a 266 nm laser was shown to form Al 2 O 3 layers on an Al6061 sample, with cover gas flow rate primarily affecting the O/Al ratio and layer thickness correlating with laser spot overlap. This combination of molecular spectra collection, imaging, and depth profiling demonstrated the robust layer analysis capabilities of LIBS.

Corrosion↗

Generation of electric-field stabilized zirconium monoxide secondary phase within cubic zirconia

Flash sintering of cubic yttria-stabilized zirconia has been studied via in situ energy dispersive diffraction. A secondary rocksalt-phase zirconium monoxide was observed emerging from the primary fluorite-phase zirconium dioxide, previously only observed as a thin interlayer at metal-oxide interfaces, upon application of a direct current electric field. The average secondary phase intensity rose over extended flow of direct current through the ceramic, faded upon removal of the field and disappeared entirely upon application of an alternating current electric field. The results indicate that the sustained application of a direct current electric field can result in significant electrochemical reduction of zirconia under high current density conditions. Poor sinterability and cracking under direct current is apparent and potential mechanisms discussed therein.

36 MATERIALS SCIENCE↗

Performance of a silicon photovoltaic module under enhanced illumination and selective filtration of incoming radiation with simultaneous cooling

A promising option to reduce the cost of silicon photovoltaic systems is to concentrate the sunlight incident on the solar cells to increase the output power. However, this leads to higher module temperatures which affects performance adversely and may also cause long term damage. Proper cooling is therefore necessary to operate the system under concentrated radiation. The present work was undertaken to circumvent the problem in practical manner. A suitable liquid, connected to a heat exchanger, was placed in the housing of the photovoltaic module and unwanted wavelengths of solar radiation were filtered out to minimise overheating of the cells. The selection of the liquid was based on factors such as boiling point, transparency towards visible radiation, absorption of infrared and ultraviolet radiation, stability, flow characteristics, heat transfer properties, and electrical nonconductivity. Using a square parabolic type reflector, more than two fold increase in output power was realised on a clear sunny day employing a 0.13 m{sup 2} silicon solar module. Without the cooling arrangement the panel temperature rose uncontrollably. (author)

14 SOLAR ENERGY↗