Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RECOMMENDATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Regression Analysis and Calibration Recommendations for the Characterization of Balance Temperature Effects

Analysis and use of temperature-dependent wind tunnel strain-gage balance calibration data are discussed in the paper. First, three different methods are presented and compared that may be used to process temperature-dependent strain-gage balance data. The first method uses an extended set of independent variables in order to process the data and predict balance loads. The second method applies an extended load iteration equation during the analysis of balance calibration data. The third method uses temperature-dependent sensitivities for the data analysis. Physical interpretations of the most important temperature-dependent regression model terms are provided that relate temperature compensation imperfections and the temperature-dependent nature of the gage factor to sets of regression model terms. Finally, balance calibration recommendations are listed so that temperature-dependent calibration data can be obtained and successfully processed using the reviewed analysis methods.

wind tunnel test↗

An Evaluation and Recommendations for Further CFD Research Based on the NASA Common Research Model (CRM) Analysis from the AIAA Drag Prediction Workshop (DPW) Series

The six Drag Prediction Workshops (DPW) have drawn a total of 125 participants submitting 225 data entries. Over half of these occurred in the last three workshops dealing with the NASA Common Research Model (CRM). Participants have ranged from North America, Europe, Asia, and South America, representing Government, Industry, Academia, and Commercial/Vendors. The DPW Series has generated a tremendous amount of CFD data, freely available to the public domain. A continuous improvement of the results as measured by: the reduction of the spread of drag predictions for the specified “nominal” cruise point, accuracy of drag increment, and the angle-of-attack sweep behavior, has been noted. Although it has been difficult separating out the parts and pieces that contribute to errors in CFD drag predictions, part of the improvements over the years can be attributed to grid resolution. The scatter in predicted drag in the continuum has been reduced dramatically from plus or minus 50 counts in DPW-I to around plus or minus 5 counts for DPW-V and - VI. During the six workshops, the grid size has grown dramatically. The average size of the medium wing-body meshes in DPW-I through DPW-IV have been 3.2, 5.4, 7.8 and 10.9 million, respectively. This represents a growth rate of approximately 17 percent per year during the eight years between DPW-I and DPW-IV. For DPW-VI, this number has grown from 25 to 50 million points for the various families of grids available. The finest level grids have increased steadily, from just over 3 million grid points in DPW-I to 225 million for the WBNP (Wing-Body-Nacelle-Pylon) in DPW-VI. While progress has been made, persistent problems with grid generation and separated flow prediction continue. The experiences and recommendations presented here are consistent with those espoused in the “CFD Vision 2030 Study: A Path to Revolutionary Computational Aerosciences,” NASA/CR-2014-218178.

Tinoco, Edward N.↗

Implementation Recommendations and Usage Boundaries for the Two-Dimensional Probability of Collision Calculation

The two-dimensional (2D) probability of collision (𝑃𝑐) estimation method relies on several assumptions that must be satisfied for accurate results. Monte Carlo analysis of ~44,000 conjunctions indicates that 2D-𝑃(sub 𝑐) pro-vides accurate estimates for most typical conjunctions, but occasionally underestimates 𝑃(sub 𝑐) significantly, indicating an assumption violation. A test to detect large-amplitude underestimation inaccuracies can be based on how much “offset-from-TCA” 2D-𝑃(sub 𝑐) values vary during a well-defined time interval bracketing closest approach. The test successfully detects all large-amplitude 2D-𝑃(sub 𝑐) underestimations found to date, but with a high false-alarm rate. The analysis also provides implementation recommendations and usage boundaries for the 2D-𝑃(sub 𝑐) method.

Hall, Doyle T.↗

Implementation Recommendations and Usage Boundaries for the Two-Dimensional Probability of Collision Calculation

The two-dimensional (2D) probability of collision (𝑃𝑐) estimation method relies on several assumptions that must be satisfied for accurate results. Monte Carlo analysis of ~44,000 conjunctions indicates that 2D-𝑃(sub 𝑐) pro-vides accurate estimates for most typical conjunctions, but occasionally underestimates 𝑃(sub 𝑐) significantly, indicating an assumption violation. A test to detect large-amplitude underestimation inaccuracies can be based on how much “offset-from-TCA” 2D-𝑃(sub 𝑐) values vary during a well-defined time interval bracketing closest approach. The test successfully detects all large-amplitude 2D-𝑃(sub 𝑐) underestimations found to date, but with a high false-alarm rate. The analysis also provides implementation recommendations and usage boundaries for the 2D-𝑃(sub 𝑐) method.

Hall, Doyle T.↗

Machine Learning in Heliophysics and space weather forecasting: a white paper of finding and recommendations

The authors of this white paper met on 16-17 January 2020 at the New Jersey Institute of Technology,Newark, NJ, for a 2-day workshop that brought together a group of heliophysicists, data providers,expert modelers, and computer/data scientists. Their objective was to discuss critical developments and prospects of the application of machine and/or deep learning techniques for data analysis, modeling and forecasting in Heliophysics, and to shape a strategy for further developments in the field. The workshop combined a set of plenary sessions featuring invited introductory talks interleaved with a set of open discussion sessions. The outcome of the discussion is encapsulated in this white paper that also features a top-level list of recommendations agreed by participants

HSR↗

Deep Space Human-Systems Research Recommendations for Future Human-Automation/Robotic Integration

Appropriate integration between automation and robotics systems and their human operators is essential for future space exploration. The Human Factors and Behavioral Performance Element of NASA’s Human Research Program requires a systematic understanding of the critical human-automation/robotic (HAR) integration, or HARI, design challenges for future space exploration. This document reports the results of a systematic assessment of the spaceflight-relevant HARI technologies and research topics addressing critical gaps in spaceflight-relevant HARI knowledge, and prioritizes research required for successful human performance and HAR integration. We reviewed relevant literature across the past ten years and interviewed ten subject matter experts to investigate the current state of HARI technology, challenges facing development, the state of HARI research across a wide range of fields, and opportunities for advancing the state of the art through directed research. This information was used to identify relevant HARI technologies and research topics, as well as factors to assess relative priority of HARI technologies. We worked with NASA stakeholders to weight the factors relevant to assessing HARI specific technologies. A multi-dimensional trade analysis was performed to objectively score HARI research topics and specific technologies to recommended investment priorities for NASA.

human-automation interaction↗

Recommended Crew Systems Capabilities for a Mars Ascent Vehicle as a Function of Flight Duration

In many human Mars exploration architectures, a Mars Ascent Vehicle (MAV) is used at the end of a surface stay to transport crew from the Martian surface to a waiting in-space transportation vehicle. It is possible for this transportation vehicle to be placed in any of several different Mars orbits, the selection of which drives the flight duration of the MAV from launch to docking and the amount of propellant required on the transportation vehicle to reach the same orbit. This paper identifies existing NASA standards and supplies habitability subject matter expert recommendations for the human habitation capabilities of the MAV as a function of flight duration. Living and working functions that may potentially be carried aboard a MAV are assessed. Flight durations considered include up to 8 hours, 8-24 hours, 1-2 days, 2-3 days, 3-4 days, and 4-7 days, which book end flight durations necessary to reach the transportation vehicle at different possible Mars orbits. This analysis will determine if there are key durations that serve as significant break points in required MAV capability.

MAV↗

Urban Air Mobility Noise: Current Practice, Gaps, and Recommendations

In 2018, NASA formed an Urban Air Mobility Noise Working Group to assemble noise experts from industry, universities and government agencies to identify, discuss, and address urban air mobility (UAM) noise issues. This paper presents a set of high-level goals intended to address barriers associated with UAM noise that may hamper their entry into service. It summarizes the current practice, identifies gaps in the current practice, and makes recommendations to address the gaps to achieve the high-level goals in four areas of interest: Tools and Technologies, Ground and Flight Testing, Human Response and Metrics, and Regulation and Policy.

urban air mobility↗

CCSDS BP V7 Bluebook Recommendation

This export is a CCSDS presentation that recommends what is necessary to create a version (V7) DTN specification for the Consultative Committee for Space Data Systems (CCSDS) blue book and is based on IETF RFC BPBis.v26 (Note the original CCSDS standard as IRTF 5050). The considerations in this presentation follow the current CCSDS specification 734.2-B-1 (​https://public.ccsds.org/Pubs/734x2b1.pdf​) and is consistent with its intent and level of service. In it, are identified areas requiring updates and specification items that are essential to meet current minimums of capability.

Delay Tolerant Networking↗

Recommendations on Use of Commercial-Off-The-Shelf (COTS) Electrical, Electronic, and Electromechanical (EEE) Parts for NASA Missions

The NASA Electronic Parts & Packaging Program Manager, requested a NASA Engineering and Safety Center independent assessment to summarize Commercial Crew Program and NASA Centers’ current and best practices, and lessons learned, on use of commercial-off-the-shelf (COTS) for all mission risk classifications, and provide recommendations that could lead to future NASA Electronic Parts and Packaging Program and/or Agency guidance on COTS parts. This document contains the outcome of the assessment.

Commercial-Off-The-Shelf↗

Recommendations Emerging from an Analysis of NASA's Deep Space Communications Capacity

During 2016-2017, NASA’s Space Communications and Navigation (SCaN) Office chartered a study of Deep Space Network (DSN) communications capacity relative to projected future-mission demand over the next 30 years. In this paper, we briefly describe the methodology used to analyze capacity vs. demand over such a broad timeframe, summarize key findings emerging from the analysis, and discuss the associated recommendations. Performing the analysis entailed: identifying key factors shaping the anticipated future mission set, identifying several alternative future mission set scenarios consistent with these factors, and then analyzing each mission set scenario in terms of required antenna capacity, downlink and uplink capabilities, and spectrum as a function of time. On the basis of these aggregate requirements, DSN loading simulations were then conducted that examined how well each of the postulated mission sets could load up onto the the DSN’s “in-plan” architecture. To the extent that capacity shortfalls emerged during these baseline simulations, architectural solutions to the shortfalls were then postulated and tested via additional simulations. In general, the trend analyses and baseline loading simulations indicated a significant progression in challenges over the next three decades. In the current decade, the DSN appeared to be operating very close to capacity. The first human exploration mission and its secondary payload launch opportunities for cubesats traveling beyond GEO contributed to this loading. As a consequence, the main challenge appeared to be managing peak assetcontention periods. In the next decade, the DSN continued to operate close to capacity but also began transitioning to more frequent human mission support. Upgrading for, and operating, a human-rated system while continuing to meet robotic mission customer requirements emerged as the key challenge. In the 2030’s and beyond, simulations suggested a need for fundamentally new capability and capacity. The high data rates and long link distances characteristic of human Mars exploration drove requirements far beyond what is currently “in plan.” The key challenge then became determining the most cost-effective combination of RF and optical assets for communicating with the postulated human Mars assets while still providing for the needs of all the other missions across the solar system. Various link budget, visibility, and loading analyses ultimately suggested that the human Mars exploration demands of the 2030’s could best be addressed with two cross-linked RF-optical areostationary relays (or an areostationary relay and deep space habitat) providing a dual “trunk link” to an array of 2-to-3 additional 34m beam waveguide antennas and an ~8.5m optical antenna at each DSN Complex. The dual “trunk link” would enable the same amount of total data return to Earth as a single trunk link at twice the data rate, but with only half the required array size on the ground, assuming use of Multiple Spacecraft Per Antenna (MSPA) techniques. MSPA techniques, including a Multiple Uplink Per Antenna (MUPA) technique currently under investigation, also showed promise for reducing asset contention in the decades prior to human Mars exploration.

Lee, Carlyn-Ann↗

Lessons and Recommendations for Board-Level Testing with Protons

Protons with sufficiently high energy, provided in a broad field covering on the order of 0.1m2 can be used to perform board-level testing for single event effects (SEE). NASA has used this approach for board-level testing over the last 20 years. Although many difficulties inherent in SEE testing are simplified when using a board-level test, including reduced cost, the method is inherently risky because of the limited value of the collected data and the potential to make critical mistakes when performing SEE testing this way, leading to data of less value. Historically, NASA’s approach to proton board-level testing has been limited to lower criticality applications. However, with users both inside and outside NASA using this method for higher levels of mission assurance, we have put together a set of lessons and recommendations to improve the value of data collected using this method. Focus areas covered include test preparation, test execution, and interpretation of results.

Guertin, Steven M.↗

Recommendation on Orbiting Sample Cleanliness

The National Aeronautics and Space Administration-European Space Agency (NASA-ESA) Mars Sample Return (MSR) campaign involves the collection of samples on Mars by the Perseverance (Mars 2020) rover and their return to Earth. To accomplish this, the Orbiting Sample container (OS) will be sent to Mars to accommodate the collected samples then launched from Mars and returned to Earth, where the samples will be removed for examination in the Sample Return Facility (SRF). Crucial to this entire sequence will be establishment of the required level of cleanliness inside the OS. In February 2021, the NASA Headquarters' Mars Sample Return Program and Office of Planetary Protection assembled an MSR OS Tiger Team (OSTT) to discuss the appropriate cleanliness level options of the interior of the OS. The team's remit was primarily focused on evaluating the trade-offs between Planetary Protection cleanliness levels 4a and 4b. These cleanliness levels are determined by the Committee on Space Research (COSPAR) planetary protection regulations, where 4a requires <300 bacterial spores/m^2 and <3 x 10^5 bacterial spores on the spacecraft (in this case, the interior of the OS) and 4b mandates the more stringent requirement of <30 bacterial spores on the spacecraft. This report documents the consensus opinion submitted by the OSTT that recommended the interior of the OS be cleaned to a 4a requirement with any feasible added effort toward 4b. This report provides, as well, the rationale for that decision.

Charles S. Cockell↗

Single-Turnover Variable Chlorophyll Fluorescence as a Tool for Assessing Phytoplankton Photosynthesis and Primary Productivity: Opportunities, Caveats and Recommendations

Phytoplankton photosynthetic physiology can be investigated through single-turnover variable chlorophyll fluorescence (ST-ChlF) approaches, which carry unique potential to autonomously collect data at high spatial and temporal resolution. Over the past decades, significant progress has been made in the development and application of ST-ChlF methods in aquatic ecosystems, and in the interpretation of the resulting observations. At the same time, however, an increasing number of sensor types, sampling protocols, and data processing algorithms have created confusion and uncertainty among potential users, with a growing divergence of practice among different research groups. In this review, we assist the existing and upcoming user community by providing an overview of current approaches and consensus recommendations for the use of ST-ChlF measurements to examine in-situ phytoplankton productivity and photo-physiology. We argue that a consistency of practice and adherence to basic operational and quality control standards is critical to ensuring data inter-comparability. Large datasets of inter-comparable and globally coherent ST-ChlF observations hold the potential to reveal large-scale patterns and trends in phytoplankton photo-physiology, photosynthetic rates and bottom-up controls on primary productivity. As such, they hold great potential to provide invaluable physiological observations on the scales relevant for the development and validation of ecosystem models and remote sensing algorithms.

variable chlorophyll fluorescence↗