Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACTOR TECHNOLOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Validation Studies of RELAP5-3D for High-Temperature Gas-Cooled Reactor Analysis Using a Refined RELAP5-3D Model of the High Temperature Test Facility

RELAP5-3D has been used extensively for high-temperature gas-cooled reactor (HTGR) analysis, but such analysis lies outside the validation basis for the code. Oregon State University (OSU) and the United States Department of Energy’s (DOE) Advanced Reactor Technologies (ART) – Gas-cooled reactor campaign worked together to design and operate the High Temperature Test Facility (HTTF) at OSU to provide validation data for prismatic HTGR thermal hydraulics analysis. Work using a previous RELAP5-3D model of HTTF demonstrated the ability to reproduce trends in HTTF data but an inability to reproduce the values measured in multiple experiments within the uncertainty. It was hypothesized that a new model with a finer radial nodalization would perform better for HTTF analysis. In this paper, we present the development of that more refined model and analyze HTTF experiments PG-27 and PG-29, a pressurized (PCC) and depressurized conduction cooldown (DCC) transient. Comparing PG-27 results to experimental data shows a better prediction of steady state and transient temperatures; however, a deeper dive reveals that better transient temperature predictions are a result of better initial conditions. The transient temperature rise in the core is comparable between the two models, but the legacy model predicts temperatures in the reflectors better. The new model demonstrates the ability to predict unique temperatures in each sector of the core during PG-29, capturing the azimuthal asymmetry; however, the temperature predictions still differ from measured temperatures. One hypothesis is that differences between the assumed and actual power distribution leads to the underprediction of the individual block temperatures. These results suggest that gaps and uncertainties in the measured boundary conditions for the HTTF tests do not allow to fully validate RELAP5-3D for prismatic HTGR analyses. The authors suspect that some of the differences between predicted and measured temperatures may be a result of uncertainties associated with HTTF itself rather than RELAP5-3D. We demonstrated improved validation for steady-state analysis, but significantly improved transient performance has yet to be recognized.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

AGR 3/4 Irradiation Test Final As Run Report

Several fuel and material irradiation experiments have been planned for the Idaho National Laboratory Advanced Reactor Technologies Technology Development Office Advanced Gas Reactor Fuel Development and Qualification Program (referred to as the INL ART TDO/AGR fuel program hereafter), which supports the development and qualification of tristructural-isotropic (TRISO) coated particle fuel for use in HTGRs. The goals of these experiments are to provide irradiation performance data to support fuel process development, qualify fuel for normal operating conditions, support development and validation of fuel performance and fission product transport models and codes, and provide irradiated fuel and materials for post irradiation examination and safety testing (INL 05/2015). AGR-3/4 combined the third and fourth in this series of planned experiments to test TRISO coated low enriched uranium (LEU) oxycarbide fuel. This combined experiment was intended to support the refinement of fission product transport models and to assess the effects of sweep gas impurities on fuel performance and fission product transport by irradiating designed-to-fail fuel particles and by measuring subsequent fission metal transport in fuel-compact matrix material and fuel-element graphite. The AGR 3/4 fuel test was successful in irradiating the fuel compacts to the burnup and fast fluence target ranges, considering the experiment was terminated short of its initial 400 EFPD target (Collin 2015). Out of the 48 AGR-3/4 compacts, 42 achieved the specified burnup of at least 6% fissions per initial heavy-metal atom (FIMA). Three capsules had a maximum fuel compact average burnup < 10% FIMA, one more than originally specified, and the maximum fuel compact average burnup was <19% FIMA for the remaining capsules, as specified. Fast neutron fluence fell in the expected range of 1.0 to 5.5×1025 n/m2 (E >0.18 MeV) for all compacts. In addition, the AGR-3/4 experiment was globally successful in keeping the temperature in the twelve capsules relatively flat in a range of temperatures suitable for the measurement of fission product diffusion in compact matrix and structural graphite materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

AGR 3/4 Irradiation Test Final As Run Report, Revision 1

Several fuel and material irradiation experiments have been planned for the Idaho National Laboratory Advanced Reactor Technologies Technology Development Office Advanced Gas Reactor Fuel Development and Qualification Program (referred to as the INL ART TDO/AGR fuel program hereafter), which supports the development and qualification of tristructural-isotropic (TRISO) coated particle fuel for use in HTGRs. The goals of these experiments are to provide irradiation performance data to support fuel process development, qualify fuel for normal operating conditions, support development and validation of fuel performance and fission product transport models and codes, and provide irradiated fuel and materials for post irradiation examination and safety testing (INL 05/2015). AGR-3/4 combined the third and fourth in this series of planned experiments to test TRISO coated low enriched uranium (LEU) oxycarbide fuel. This combined experiment was intended to support the refinement of fission product transport models and to assess the effects of sweep gas impurities on fuel performance and fission product transport by irradiating designed-to-fail fuel particles and by measuring subsequent fission metal transport in fuel-compact matrix material and fuel-element graphite. The AGR 3/4 fuel test was successful in irradiating the fuel compacts to the burnup and fast fluence target ranges, considering the experiment was terminated short of its initial 400 EFPD target (Collin 2015). Out of the 48 AGR-3/4 compacts, 42 achieved the specified burnup of at least 6% fissions per initial heavy-metal atom (FIMA). Three capsules had a maximum fuel compact average burnup < 10% FIMA, one more than originally specified, and the maximum fuel compact average burnup was <19% FIMA for the remaining capsules, as specified. Fast neutron fluence fell in the expected range of 1.0 to 5.5 × 10 25 n/m 2 (E >0.18 MeV) for all compacts. In addition, the AGR-3/4 experiment was globally successful in keeping the temperature in the twelve capsules relatively flat in a range of temperatures suitable for the measurement of fission product diffusion in compact matrix and structural graphite materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Application of Directed Energy Deposition for Transformational Challenge Reactor Core

The following report focuses on utilizing directed energy deposition (DED) for constructing the Transformational Challenge Reactor core. Multiple additive manufacturing processes are under investigation to evaluate the advantages and viability of each process for direct manufacturing of complex structures needed for future nuclear reactors. Technologies under investigation include binder jet, laser powder bed (LPB) fusion, electron beam powder bed fusion, and DED. Each process has advantages and disadvantages. For the core design, the current manufacturing approach consists of integrating LPB with DED. This hybrid manufacturing approach uses LPB for the core’s top and bottom manifold (where complexity is high) and DED for the manufacture of the cladding, where complexity is still high but geometric variability, size, and speed are better suited for DED. Research has focused on processing parameter development, evaluation of toolpath generation algorithms, core designs suitable for DED, manufacturing tolerances for integration of fuel elements, and seamless calibration and integration of LPB components into a DED build volume to create monolithic structures based on integrating these technologies. The following report highlights reactor core design as it relates to DED and experimental validation of test components necessary for finalizing the core design.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Domestic MC&A Recommendations for Liquid-Fueled MSRs

Investments by the US Department of Energy (DOE) are providing opportunities for vendors and developers of advanced reactor technologies to move toward experimental reactor systems, leading to commercial scale facilities. One facet of complementary research under the Advanced Reactor Safeguards program in the DOE Office of Nuclear Energy (NE-5) is motivated to assist vendors in licensing under the existing US (domestic) regulatory body’s federal regulations. This report provides concepts, approaches, and recommendations for liquid-fueled molten salt reactor (MSR) vendors to meet the material control and accountability (MC&A) and licensing requirements set forth by the US Nuclear Regulatory Commission (NRC) to possess and handle special nuclear material.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Properties of Austenitic Stainless Steels for Nuclear Reactor Applications

Austenitic stainless steels are widely used in current commercial BWR and PWR systems as in-core and surrounding structural materials. These versatile steels have also been the main materials considered and applied for many advanced reactor technologies, including fast-breeder reactors and magnetic fusion reactors. For advanced reactors for higher-temperatures or high lifetime damage levels, modified versions of the standard commercial stainless steel grades have been developed to provide improved properties performance and radiation-resistance in specific reactor environments. An overview of the unirradiated properties and a summary of some important radiation-induced properties changes are presented. Highlights of several alloys developed for more radiation-resistance or better performance in specific reactor environments are highlighted.

Maziasz, Philip J↗

Ongoing Data Platform Development for High-Temperature Gas-cooled Reactor (HTGR) Thermal-Fluid Experiments Supported by Nuclear Energy University Program (NEUP) [Presentation Slides]

There are in total 30NEUP projects focusing on the thermal-fluid experiments related with High-Temperature Gas-cooled Reactor (HTGR) from FY2009 to FY2021, producing a large amount of high-quality validation data, however, these valuable data has been scattering everywhere and not been disseminated to the community well, and final reports are available only from OSTI webpage. This could potentially be a huge waste, not only for government budget but also for the HTGR research community. To improve access to this HTGR validation data and optimize the return on the significant investment made by DOE and supported by the Advanced Reactor Technologies (ART) Gas-Cooled Reactor (GCR) program, we conducted a survey to assess completed and ongoing HTGR NEUP projects with the aim to develop a public-access data platform that can be used to retrieve code validation data and guide future NEUP investments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

HTGR Validation: NEUP Survey and Database Database Development for HTGR Thermal-Fluid Experiments

This set of slides is aimed to improve access to the High-Temperature Gas-cooled Reactor (HTGR) validation data and optimize the return on the significant investment made by DOE. Supported by the Advanced Reactor Technologies (ART) Gas-Cooled Reactor (GCR) program. Slides include information from FY2009 to FY2023, there are in total 35 DOE NEUP projects focusing on the thermal-fluid experiments related with High-Temperature Gas-cooled Reactor (HTGR), producing a large amount of high-quality validation data. NEUP Survey and Database Development for HTGR Thermal-Fluid Experiments is distributed at universities and has not been disseminated to the HTGR community. More collaborating with university PIs and refining the HTGR phenomena summary chart continuously is expected in the future.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Investigation of the Impact of TSL Data Libraries and Geometry Variations on the MSRE Benchmark

The increasing demand for green, low-carbon energy solutions has amplified the focus on advanced nuclear reactor technologies. Among these, Molten Salt Reactors (MSRs) have been spotlighted because of their special features. Historically, Oak Ridge National Laboratory (ORNL) started the Molten Salt Reactor Experiment (MSRE) in 1956. Later, ORNL and the University of California, Berkeley (UCB) jointly developed the MSRE benchmark. This was then reviewed by the International Reactor Physics Experiment Evaluation Project (IRPhEP) committee and added to their 2019 handbook. In the current study, the benchmark model was recreated via the Serpent code. The calculated effective multiplication factor was 1.02087 ± 0.00019, which gives a deviation of about 2000 pcm compared to the benchmark/experimental result. At North Carolina State University (NCSU), recent evaluations were conducted on thermal scattering cross sections for molten salt FLiBe and 20% porous nuclear graphite, anticipated for incorporation in the ENDF/B-VIII.1 library. The influences of these thermal scattering law (TSL) data and geometry changes on the multiplication factor were examined using the ENDF/B-VII.1 and ENDF/B-VIII.0 libraries. Introducing the TSL data for FLiBe and 20% porous graphite resulted in an effective multiplication factor of +270 pcm compared to the reference value obtained with ENDF/B-VII.1 in this study. The adjustment of the reactor vessel dimensions resulted in decrease of -448 pcm in the calculated effective multiplication factor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fiber Optic Instrumentation in High Temperature Irradiation Environments

The extremely harsh conditions of advanced reactor designs pose serious challenges for nuclear fuels and materials. Traditional instrumentation (thermocouples, strain gauges, etc.) are not well suited for extended operation in such a harsh environment. This work discusses the potential for using fiber optic-based instrumentation in high temperature irradiation experiments. The primary limitation of fiber optic instrumentation in irradiation experiments is signal darkening due to attenuation in the fiber material. A computational model has been developed to predict broadband optical attenuation in fused silica fiber materials as a function of time, temperature, and dose. Preliminary results obtained using this model are shown for one cycle of irradiation in the high flux isotope reactor at various temperatures. An irradiation campaign has been initiated to provide temperature-dependent optical attenuation data at high dose in order to validate the predictive model. Demonstration of the safety and reliability of new and enhanced nuclear fuels and materials is essential for improving the safety and reliability of existing nuclear power plants and for the licensing and operation of advanced nuclear reactor technologies. Experimental validation of fuel performance codes requires high fidelity measurements during instrumented irradiation experiments. Therefore, a clear need exists for sensors of unprecedented accuracy, resolution, time/space/energy spectrum dependence, reduced size, and, perhaps most importantly, performance in harsh environments. The harsh environment during accelerated irradiation testing could include temperatures from 300 deg. C up to 2600 deg. C, and radiation damage levels ranging from 1 to greater than 100 dpa. Optical fiber-based sensors are a promising candidate for instrumentation in high temperature irradiation environments. Optical fibers are small, inexpensive, chemically inert, immune to electromagnetic interference, and made of high temperature radiation-hard materials. The ability to make distributed measurements of temperature or strain using a single inexpensive optical fiber currently exists for non-extreme environments as commercially available technology. Other advanced sensing technologies such as laser ultrasound, borescopes, and laser-induced breakdown spectroscopy use fiber optic light delivery as a critical component of the sensor design. Some potential applications for optical fiber-based sensors in instrumented irradiation experiments include in-situ measurements of thermal conductivity, ultrasonic measurement of elastic constants (with fiber optic delivery of signal for generation and detection of ultrasonic wave), and distributed measurements of temperature and/or strain (i.e., swelling). The primary limitation for the use of optical technologies for harsh environment (e.g., high neutron flux reactor environments) instrumentation is the attenuation of the light signal due to the effects of temperature and/or irradiation. This work summarizes initial efforts towards developing a predictive model of temperature-dependent radiation-induced attenuation in fused silica optical fibers at high dose. If there is adequate transmission in the fibers, fiber optic-based instrumentation could provide highly accurate distributed measurements during instrumented fuel/material irradiation experiments. Preliminary results show attenuation on the order of 5- 10 dB/m in the wavelength range of 750-900 nm at temperatures of 300 deg. C and below after one HFIR cycle (24 days). At higher temperatures (600 and 900 deg. C), the attenuation is reduced below 5 dB/m in the same wavelength range. This amount of attenuation is acceptable for most fiber optic based sensor systems with a dynamic range on the order of 20-50 dB for a reasonable length (1-2 meters) of fiber in the high flux region. Many optical components use a wavelength of 850 nm, which lies in the low attenuation window. In order to refine and ultimately validate the predictive model of optical fiber attenuation, a reactor irradiation campaign has been initiated. Rabbit irradiation capsules have been designed to irradiate optical fiber material (low and high OH fused silica, as well as single crystal sapphire) specimens in the HFIR at temperatures ranging from 100 to 1200 deg. C. (authors)

42 ENGINEERING↗

Natrium Demonstration Reactor Support [Abstract]

TerraPower, LLC (TerraPower, Participant) and other private industry partners endeavor to design, license, construct, and operate a sodium-cooled fast-spectrum nuclear reactor technology demonstration plant called Natrium. This demonstration plant is supported by the U.S. Department of Energy (DOE) through the Advanced Reactor Demonstration Program (ARDP; DE-FOA-0002271). TerraPower, together with its technology co-developer GE Hitachi Nuclear Energy (GEH) and engineering and construction partner Bechtel, submitted a proposal under the program’s Advanced Reactor Demonstration Pathway for its Natrium reactor and energy system and recently received an award. TerraPower is partnering with Battelle Memorial Institute, the Management and Operating Contractor of Pacific Northwest National Laboratory (PNNL, Contractor) under the Natrium project to provide critical research outcomes necessary to demonstrate the reactor technology. Over the expected five-year timeframe of the project, PNNL will provide TerraPower and its partners with vital support in the areas of post-irradiation examination (PIE) of specimens irradiated in test reactors. These efforts will be combined and managed as a program titled “Natrium Demonstration Reactor Support.”

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

All Nuclear Hybrid Superheater Design Method

The 'All Nuclear Hybrid' (ANH) concept combines Light Water (LWR) and Generation IV (Gen IV) reactor technologies to produce superheated steam. LWR technology characteristically produces steam temperatures of ∼300 C. Process steam demands such as refineries and hydrogen production can require steam temperatures that exceed 600 C. Therefore, an additional heat source must be added to provide the heat to increase or 'boost' the temperature of the steam generated from by the LWR. A recent study demonstrated that application of the ANH concept to a refinery optimized the use of nuclear technologies and maximized carbon dioxide emission reductions. The objective of the present work is to size the heat exchangers (Superheaters) required to apply the ANH concept to a Westinghouse AP1000 LWR to produce 675 C superheated steam. Two GenIV reactor concepts are considered to provide the additional heat source and high primary coolant temperatures required to produce the superheated steam: a High temperature Gas Reactor (HTGR) using helium as primary coolant, and a Molten Salt reactor. The details of the GenIV reactor designs are not the focus of this study; however, the primary coolant thermal conditions from these concepts are utilized directly in the superheater sizing calculations. Also, a tube and shell superheater design is assumed for the superheater due to its extensive use in the nuclear and other industries. The ANH concept generates superheated steam by first utilizing LWR technology to accomplish the phase change from liquid water to steam within the steam generator. This is a well-established technology with several decades of successful safe operation. Next, the concept utilizes GenIV reactor technology to superheat the steam. Since both the working fluids in the superheater are single phase, the heat transfer and pressure drop calculations required to size the superheater can be performed without complex two-phase computer analyses (i.e., RELAP5). This study presents an approach for the sizing the ANH superheater using an iterative LMTD heat exchanger design method. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Two-Dimensional Neutronic and Fuel Cycle Analysis of the LEU-Fueled Transatomic Power Molten Salt Reactor

A recent Third Way report detailing $1.3 billion in private investment in advanced reactor technology includes several liquid-fueled molten salt reactor (MSR) concepts. Interest in these MSR concepts is driven by the enhanced safety, economic, and promising fuel cycle benefits of these advanced reactor concepts. The US Department of Energy (DOE) Office of Nuclear Energy established the Gateway for Accelerated Innovation in Nuclear (GAIN) to provide private companies pursuing innovative nuclear energy technologies with access to the technical support necessary to move toward commercialization. GAIN activities in 2016 included competitive selection of projects for vouchers to fund applicant-specific work at national laboratories. One of these GAIN small business voucher awards was to Transatomic Power Corporation (TAP) to work with Oak Ridge National Laboratory (ORNL) to perform neutronic and fuel cycle analysis and design of TAP's innovative MSR concept. The initial phase of this project is to perform two-dimensional (2D) analysis with ORNL-developed tools to verify TAP-calculated metrics and to develop an understanding of the effects of fuel feed and isotopic removal rates to prepare for the more complex three-dimensional (3D) analysis in coming phases. Design information was based on the TAP white papers wherever possible. This summary discusses the results of this initial phase of the collaboration between ORNL and TAP.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

AREVA Steam Cycle High Temperature Gas-Cooled Reactor Development and Deployment Plan - 18684

The development and deployment timeline for the AREVA SC-HTGR is among the shortest of all Generation IV reactor technologies. Once demonstrated, the SC-HTGR enters an expanding marketplace beyond electricity generation. This enables industrial growth that is today solely captive to fossil fuels, primarily natural gas supply. The SC-HTGR plant will be a hedge that insulates a wide range of process industries from fossil fuel price and supply volatility in coming decades when the SC-HTGR plant design is ready for deployment. Similar to existing light water reactors, the SC-HTGR is largely immune to fuel price swings for its expected 60 year operating life cycle. Approximately 70% of the SCHTGR plant energy cost is driven by the initial capital investment with fuel being less than 20%. This is entirely the opposite of natural gas fueled power plants where about 70% of the energy cost is directly tied to the cost and availability of fuel and the potential volatility this brings with it over a plant life cycle that could span several decades. This paper details the development and deployment strategy envisioned by AREVA for the SC-HTGR plant. The development phase includes completion of the full scale reactor module design and licensing, build and demonstrate the first commercial scale module, get design certification, and launch the commercial fleet deployment. The development plan takes full advantage of a) a large body of successful pre-application licensing interactions with the NRC under the DOE NGNP project, b) ongoing experiments and test results accumulated through the TRISO particle fuel qualification and nuclear grade graphite characterization R and D activities conducted in the U.S. and internationally, and c) operation of several small scale technology demonstration facilities and large scale commercial design projects. The abundance of the historic HTGR reactor technology demonstration projects provides a high degree of confidence that sufficient technical information is available to begin FOAK plant engineering and licensing followed by commercial demonstration of the first reactor module within a next decade. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Synthesis of Molten Chloride Salt Fast Reactor Fuel Salt from Spent Nuclear Fuel (CRADA 2017-17170 Final Report)

Elysium Industries USA, Inc. aims to produce safe, cost effective, carbon conscious energy through the development of an advanced liquid-fueled reactor technology. The Elysium liquid-fueled reactor concept comprises a molten chloride salt fueled fast spectrum nuclear reactor, which can accept fissle material recovered from used nuclear fuel and excess fissile material from defense applications. A key technology development need for the system is demonstrating the feasibility of a low cost, efficent method to produce the chloride fuel salt from used nuclear fuel. This approach not only provides a pathway for the disposition of used nuclear but more efficient use of uranium resources for energy production.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uncertainty Quantification of Calculated Temperatures for the U.S. Capsules in the AGR-2 Experiment

A series of Advanced Gas Reactor (AGR) irradiation experiments are being conducted within the Advanced Reactor Technology (ART) Fuel Development and Qualification Program. The main objectives of the fuel experimental campaign are to provide the necessary data on fuel performance to support fuel process development, qualify a fuel design and fabrication process for normal operation and accident conditions, and support development and validation of fuel performance and fission product transport models and codes (PLN-3636). The AGR-2 test was inserted in the B-12 position in the Advanced Test Reactor (ATR) core at Idaho National Laboratory (INL) in June 2010 and successfully completed irradiation in October 2013, resulting in irradiation of the TRISO fuel for 559.2 effective full power days (EFPDs) during approximately 3.3 calendar years. The AGR-2 data, including the irradiation data and calculated results, were qualified and stored in the Nuclear Data Management and Analysis System (NDMAS) (Pham and Einerson 2014). To support the U.S. TRISO fuel performance assessment and to provide data for validation of fuel performance and fission product transport models and codes, the daily as-run thermal analysis has been performed separately on each of four AGR-2 U.S. capsules for the entire irradiation as discussed in (Hawkes 2014). The ABAQUS code’s finite element-based thermal model predicts the daily average volume-average fuel temperature and peak fuel temperature in each capsule. This thermal model involves complex physical mechanisms (e.g., graphite holder and fuel compact shrinkage) and properties (e.g., conductivity and density). Therefore, the thermal model predictions are affected by uncertainty in input parameters and by incomplete knowledge of the underlying physics leading to modeling assumptions. Therefore, alongside with the deterministic predictions from a set of input thermal conditions, information about prediction uncertainty is instrumental for the ART program decision-making. Well defined and reduced uncertainty in model predictions helps increase the quality of and confidence in the AGR technical findings.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermal-hydraulic analyses of MIT reactor LEU transition cycles

The Massachusetts Institute of Technology Reactor (MITR) is a research reactor in Cambridge, Massachusetts designed primarily for experiments using neutron beam and in-core irradiation facilities. In the framework of non-proliferation policy, research and test reactors have started a program to convert highly enriched uranium (HEU) fuel to low-enriched uranium (LEU) fuel. A new type of LEU fuel based on a high-density alloy of uranium and molybdenum (U-10Mo) is expected to allow conversion. A transition core plan, from 22 fresh LEU fuel elements to 24 in an equilibrium state, is proposed. This study evaluates the thermal-hydraulic safety margins of each transition cycle and state (i.e. beginning, middle and end). The STAT7 and RELAP5 codes are used in the study. STAT7 provides an integrated platform for statistical propagation of uncertainties in determining steady-state thermal-hydraulic margins. A RELAP5 model was created to verify MITR's STAT7 model, and provide transient analyses. The steady-state analyses determined that, during the entire transition from a fresh to equilibrium core, the Limiting System Safety Settings (LSSS) has a 10.2% margin to the minimum power at which onset of nucleate boiling (ONB) is precluded at 3σ confidence. The loss of flow (LOF) transient, which is the most limiting anticipated transient for the MITR, was simulated. With a conservative initial state of the reactor (operating at μ + 3σ power level and LSSS mass flow rate), the maximum calculated centerline fuel temperature was 115 degrees C, which is a significantly lower value than the blistering limit of 350 degrees C. The cladding wall temperatures did not exceed the ONB temperature throughout the transient. Therefore, during LOF, no nucleate boiling is expected, precluding any critical heat flux trigger. Overall, this study indicates that the proposed LEU transition core specifications have significant margin to thermal-hydraulic limits, during steady-state operation and the LOF transient.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The IAEA coordinated research project on modular HTGR safety design: status and outlook - 18608

The IAEA Coordinated Research Project (CRP) on Modular High Temperature Gas-cooled Reactor (HTGR) Safety Design started in December 2014 and is now in its second year of implementation. The project investigates and makes proposals on safety design criteria by not only considering the existing water cooled reactors safety requirements for nuclear power plant design but also making use of past and current experience of HTGR licensing in the IAEA member states. Two approaches are being followed to establish the criteria. The first is to develop and apply a safety design process to specific reactor de-signs. The second is to use the existing IAEA specific safety requirements for designs based on water cooled reactor technology and then through expert judgment and review propose changes that is needed to make it applicable to HTGRs. The detailed project content and a description of modular HTGRs and its safety features are given. This informs the comments made on the applicability of the existing requirements and the examples of newly pro-posed HTGR specific safety requirements under development. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗