Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIO NOISE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Field Results from Three Campaigns to Validate the Performance of the Miniaturized Laser Heterodyne Radiometer (Mini‐LHR) for Measuring Carbon Dioxide and Methane in the Atmospheric Column

In a collaboration between NASA GSFC and GWU, a low-cost, surface instrument is being developed that can continuously monitor key carbon cycle gases in the atmospheric column: carbon dioxide (CO2) and methane (CH4). The instrument is based on a miniaturized, laser heterodyne radiometer (LHR) using near infrared (NIR) telecom lasers. Despite relatively weak absorption line strengths in this spectral region, spectrallyresolved atmospheric column absorptions for these two molecules fall in the range of 60-80% and thus sensitive and precise measurements of column concentrations are possible. In the last year, the instrument was deployed for field measurements at Park Falls, Wisconsin; Castle Airport near Atwater, California; and at the NOAA Mauna Loa Observatory in Hawaii. For each subsequent campaign, improvement in the figures of merit for the instrument has been observed. In the latest work the absorbance noise is approaching 0.002 optical density (OD) noise on a 1.8 OD signal. An overview of the measurement campaigns and the data retrieval algorithm for the calculation of column concentrations will be presented. For light transmission through the atmosphere, it is necessary to account for variation of pressure, temperature, composition, and refractive index through the atmosphere that are all functions of latitude, longitude, time of day, altitude, etc. For temperature, pressure, and humidity profiles with altitude we use the Modern-Era Retrospective Analysis for Research and Applications (MERRA) data. Spectral simulation is accomplished by integrating short-path segments along the trajectory using the SpecSyn spectral simulation suite developed at GW. Column concentrations are extracted by minimizing residuals between observed and modeled spectrum using the Nelder-Mead simplex algorithm. We will also present an assessment of uncertainty in the reported concentrations from assumptions made in the meteorological data, LHR instrument and tracker noise, and radio frequency bandwidth and describe additional future goals in instrument development and deployment target

meteorological data↗

Double Sided Si(Ge)/Sapphire/III-Nitride Hybrid Structure

One aspect of the present invention is a double sided hybrid crystal structure including a trigonal Sapphire wafer containing a (0001) C-plane and having front and rear sides. The Sapphire wafer is substantially transparent to light in the visible and infrared spectra, and also provides insulation with respect to electromagnetic radio frequency noise. A layer of crystalline Si material having a cubic diamond structure aligned with the cubic <111> direction on the (0001) C-plane and strained as rhombohedron to thereby enable continuous integration of a selected (SiGe) device onto the rear side of the Sapphire wafer. The double sided hybrid crystal structure further includes an integrated III-Nitride crystalline layer on the front side of the Sapphire wafer that enables continuous integration of a selected III-Nitride device on the front side of the Sapphire wafer.

Park, Yeonjoon↗

Method of Fabricating Double Sided Si(Ge)/Sapphire/III-Nitride Hybrid Structure

One aspect of the present invention is a double sided hybrid crystal structure including a trigonal Sapphire wafer containing a (0001) C-plane and having front and rear sides. The Sapphire wafer is substantially transparent to light in the visible and infrared spectra, and also provides insulation with respect to electromagnetic radio frequency noise. A layer of crystalline Si material having a cubic diamond structure aligned with the cubic <111> direction on the (0001) C-plane and strained as rhombohedron to thereby enable continuous integration of a selected (SiGe) device onto the rear side of the Sapphire wafer. The double sided hybrid crystal structure further includes an integrated III-Nitride crystalline layer on the front side of the Sapphire wafer that enables continuous integration of a selected III-Nitride device on the front side of the Sapphire wafer.

Park, Yeonjoon↗

New Methods to Determine the Electromagnetic Effects from Precipitation Static

The Electrostatics and Surface Physic Laboratory has devised a new method to determine the electromagnetic effects from precipitation static or p-static as its commonly called. P-static occurs as a result of triboelectric charging of granular materials or ice crystals bombarded onto the surfaces of air and/or space vehicles at high speeds. The electrostatic charge that builds up on the outer surface can have deleterious effects that arise during discharge events. These discharges can cause loss of communication to and from the vehicle from ground stations, EMI interference, radio frequency noise, etc… There are even cases of total loss of vehicles caused by p-static charging. We have developed a method to simulate the extensive tribocharging of insulating materials that occurs during p-static through the use of corona charging which allows testing to occur within a lab environment. These tests simulate the discharges that occur on rocket vehicles during ascent as a result of gas breakdown by performing the corona charging tests inside a vacuum chamber and subsequently removing the air. The simultaneous gas discharges emit electromagnetic interference (EMI) which can be captured and monitored.

Charles R Buhler↗

Timing Noise in SGR 1806-20

We have phase connected a sequence of Rossi X-ray Timing Explorer Proportional Counter Array observations of SGR 1806-20 covering 178 days. We find a simple secular spin-down model does not adequately fit the data. The period derivative varies gradually during the observations between 8.1 and 11.7 x 10(exp -11) s/s (approx. 40% larger than the long term trend), while the average burst rate as seen with the Burst and Transient Source Experiment drops throughout the time interval. The phase residuals show no evidence for periodicity, but more closely resemble timing noise as seen ill radio pulsars. The magnitude of the timing noise., however, is large relative to the noise level typically found in radio pulsars (Delta(sub 8) = 4.8; frequency derivative average power approx. = 8 X 10(exp -20) Hz/sq s). Combined with the noise levels measured for some AXPs. we find all magnetar candidates have A8 values larger than those expected from a simple extrapolation of the correlation found in radio pulsars. We find the timing noise ill SGR 1806-20 is greater than or equal to the levels found in some accreting systems (e.g., Vela X-1, 4U 1538-52 and 4U 1626-67). Alternatively, an orbital model with a period P(sub orb) = 733 days provides a statistically acceptable fit to the data. If the phase residuals are created by Doppler shifts from a gravitationally bound companion. then the allowed parameter space for the mass function (small) and orbital separation (large) rule out the possibility of accretion from the companion sufficient to power the persistent emission from the SGR.

Woods, Peter M.↗

Timing Noise in SGR 1806-20

We have phase-connected a sequence of Rossi X-Ray Timing Explorer Proportional Counter Array observations of SGR 1806-20 covering 178 days. We find that a simple secular spin-down model does not adequately fit the data. The period derivative varies gradually during the observations between 8.1 x 10(exp -11) and 11.7 x 10(exp -11) s/s (at its highest, approximately 40% larger than the long-term trend), while the average burst rate as seen with the Burst and Transient Source Experiment drops throughout the time interval. The phase residuals give no compelling evidence for periodicity, but more closely resemble timing noise as seen in radio pulsars. The magnitude of the timing noise, however, is large relative to the noise level typically found in radio pulsars (Delta(sub 8) = 4.8; frequency derivative average power approximately 7 x 10(exp -20) sq cycles/cubic s). Combining these results with the noise levels measured for some anomalous X-ray pulsars, we find that all magnetar candidates have Delta(sub 8) values larger than those expected from a simple extrapolation of the correlation found in radio pulsars. We find that the timing noise in SGR 1806-20 is greater than or equal to the levels found in some accreting systems (e.g., Vela X-1, 4U 1538-52, and 4U 1626-67), but the spin-down of SGR 1806-20 has thus far maintained coherence over 6 yr. Alternatively, an orbital model with a period P(sub orb) = 733 days provides a statistically acceptable fit to the data. If the phase residuals are created by Doppler shifts from a gravitationally bound companion, then the allowed parameter space for the mass function (small) and orbital separation (large) rule out the possibility of accretion from the companion sufficient to power the persistent emission from the SGR.

Woods, P. M.↗

The Effects of Correlated Noise in Phased-Array Observations of Radio Sources

Arrays of radio telescopes are now routinely used to provide increased signal-to-noise when obseving faint point sources. However, calculation of the achievable sensitivity is complicated if there are sources in the field of view other than the target source. These additional sources not only increase the system temperatures of the individual antennas, but may also contribute significant

radio↗

Measurement of macroscopic plasma parameters with a radio experiment: Interpretation of the quasi-thermal noise spectrum observed in the solar wind

The ISEE-3 SBH radio receiver has provided the first systematic observations of the quasi-thermal (plasma waves) noise in the solar wind plasma. The theoretical interpretation of that noise involves the particle distribution function so that electric noise measurements with long antennas provide a fast and independent method of measuring plasma parameters: densities and temperatures of a two component (core and halo) electron distribution function have been obtained in that way. The polarization of that noise is frequency dependent and sensitive to the drift velocity of the electron population. Below the plasma frequency, there is evidence of a weak noise spectrum with spectral index -1 which is not yet accounted for by the theory. The theoretical treatment of the noise associated with the low energy (thermal) proton population shows that the moving electrical antenna radiates in the surrounding plasma by Carenkov emission which becomes predominant at the low frequencies, below about 0.1 F sub P.

Couturier, P.↗

The effects of correlated noise in phased-array observations of radio sources

Arrays of radio telescopes are now routinely used to provide increased signal-to-noise when observing faint point sources. However, calculation of the achievable sensitivity is complicated if there are sources in the field of view other than the target source. These additional sources not only increase the system temperatures of the individual antennas, but may also contribute significant 'correlated noise' to the effective system temperature of the array. This problem has been of particular interest in the context of tracking spacecraft in the vicinity of radio-bright planets (e.g., Galileo at Jupiter), but it has broader astronomical relevance as well. This paper presents a general formulation of the problem, for the case of a point-like target source in the presence of an additional radio source of arbitrary brightness distribution. We re-derive the well known result that, in the absence of any background sources, a phased array of N indentical antennas is a factor of N more sensitive than a single antenna. We also show that an unphased array of N identical antennas is, on average, no more sensitive than a single antenna if the signals from the individual antennas are combined prior to detection. In the case where a background source is present we show that the effects of correlated noise are highly geometry dependent, and for some astronomical observations may cause significant fluctuations in the array's effective system temperature.

Dewey, Rachel J.↗

Interplanetary Scintillation

Interplanetary scintillation (IPS) has been used as a diagnostic of solar wind speed and interplanetary plasma turbulence, allowing inference of speed and electron density power spectrum close to the Sun and out of the ecliptic. In that context, IPS is 'signal' and provides scientifically interesting data. IPS is also of interest because amplitude and phase perturbations imposed on radio waves are 'noise' for telemetry and precision Doppler tracking of deep space probes and for some radio astronomical observations. This paper briefly reviews the connection between scattering observables and the electron density power spectrum. Interplanetary phase scintillation on time scales of 100 to 10 000 seconds is an important noise in mass determinations of small solar system bodies during space-probe fly-bys and in searches for low-frequency gravitational radiation.

waves deep space probes electron density power spe↗

Noise amplitude measurements of single-mode CW lasers at radio frequencies

This letter presents the results of noise measurements for a variety of single-longitudinal-mode CW lasers (Ar/+/, standing-wave-dye, and ring-dye) that are commercially available. A quantitative comparison of the total output power fluctuations detected over the 7-300 MHz region (3 dB points) is presented.

Herring, G. C.↗

Wavelet Denoising of Radio Observations of Rotating Radio Transients (RRATs): Improved Timing Parameters for Eight RRATs

Rotating radio transients (RRATs) are sporadically emitting pulsars detectable only through searches for single pulses. While over 100 RRATs have been detected, only a small fraction (roughly 20%) have phase-connected timing solutions, which are critical for determining how they relate to other neutron star populations. Detecting more pulses in order to achieve solutions is key to understanding their physical nature. Astronomical signals collected by radio telescopes contain noise from many sources, making the detection of weak pulses difficult. Applying a denoising method to raw time series prior to performing a single-pulse search typically leads to a more accurate estimation of their times of arrival (TOAs). Taking into account some features of RRAT pulses and noise, we present a denoising method based on wavelet data analysis, an image-processing technique. Assuming that the spin period of an RRAT is known, we estimate the frequency spectrum components contributing to the composition of RRAT pulses. This allows us to suppress the noise, which contributes to other frequencies. We apply the wavelet denoising method including selective wavelet reconstruction and wavelet shrinkage to the de-dispersed time series of eight RRATs with existing timing solutions. The signal-to-noise ratio (S/N) of most pulses are improved after wavelet denoising. Compared to the conventional approach, we measure 12%–69% more TOAs for the eight RRATs. The new timing solutions for the eight RRATs show 16%–90% smaller estimation error of most parameters. Thus, we conclude that wavelet analysis is an effective tool for denoising RRATs signal.

79 ASTRONOMY AND ASTROPHYSICS↗

Conceptual Ideas for Radio Telescope on the Far Side of the Moon

A radio telescope on the far-side of the Moon has tremendous advantages compared to Earth-based telescopes because it could observe the universe at wavelengths that are hitherto poorly explored by humans so far and the Moon acts as a physical shield that isolates the telescope from the radio interference and noises from Earth. This paper presents a novel concept for building a radio telescope on the far-side of the Moon. The main idea is to shape a suitable existing lunar crater (1 − 50km in diameter) on the far-side of the Moon into a spherical reflecting dish. The proposed Lunar Crater Radio Telescope (LCRT) would be able to observe the universe in the 5 − 100m wavelength band (i.e., 3 − 60MHz radio frequency band). The key innovations of this concept are: (1) LCRT would be the largest filled-aperture radio telescope in the Solar System. (2) LCRT could potentially make tremendous scientific discoveries in fields of cosmology and extrasolar planets by observing the universe in the 5−100m λ band(i.e., 3−60MHz ν band) that has been hitherto poorly explored. (3) It would require only a few robots from Earth and autonomously modify an existing lunar crater to build the LCRT; thereby significantly reducing launch weight and cost compared to all previous lunar surface telescope mission concepts. (4) Furthermore, the Earth based robots are not consumed during construction of LCRT. Therefore, they could create a network of LCRTs to (i) observe different regions of the universe, and (ii) enable lunar Very-Long-Baseline Interferometry (VLBI) astronomy. We envisage that this concept would unlock the potential for groundbreaking scientific discoveries in radio astronomy.

Rahmani, Amir↗

GREEN BANK TELESCOPE AND SWIFT X-RAY TELESCOPE OBSERVATIONS OF THE GALACTIC CENTER RADIO MAGNETAR SGR J1745–2900

We present results from eight months of Green Bank Telescope 8.7 GHz observations and nearly 18 months of Swift X-ray telescope observations of the radio magnetar SGR J1745–2900. We tracked the radio and X-ray flux density, polarization properties, profile evolution, rotation, and single-pulse behavior. We identified two main periods of activity. The first is characterized by approximately 5.5 months of relatively stable evolution in radio flux density, rotation, and profile shape, while in the second these properties varied substantially. Specifically, a third profile component emerged and the radio flux also became more variable. The single pulse properties also changed, most notably with a larger fraction of pulses with pulse widths ∼5–20 ms in the erratic state. Bright single pulses are well described by a log-normal energy distribution at low energies, but with an excess at high energies. The 2–10 keV flux decayed steadily since the initial X-ray outburst, while the radio flux remained stable to within ∼20% during the stable state. A joint pulsar timing analysis of the radio and X-ray data shows a level of timing noise unprecedented in a radio magnetar, though during the time covered by the radio data alone the timing noise was at a level similar to that observed in other radio magnetars. While SGR J1745–2900 is similar to other radio magnetars in many regards, it differs by having experienced a period of relative stability in the radio that now appears to have ended, while the X-ray properties evolved independently.

79 ASTRONOMY AND ASTROPHYSICS↗

Radiowave Phase Scintillation and Precision Doppler Tracking of Spacecraft

Phase scintillation cause by propagation through irregularities in the solar wind, ionosphere, and tropospher, introduces noise in spacecraft radio science experiments. The observations reported here are uses to refine the propagation noise model for Doppler tracking of deep space probes.

Phase Scintillation Precision Doppler↗

Post-flare effects in the lower ionosphere of middle latitudes

Beginning in the 1960s, records were made of noise from the region around the Polar Star on 29 MHz (Krivsky and Tlamicha, 1960) at the Ondrejov Observatory near Prague. Since the aerial characteristic was not too narrow, radio bursts were received of solar origin (of flares) at the noise level, SCNA effects (sudden cosmic noise absorption) at the time of intensive flare X-emission and in some rare cases, after large proton flares, small absorption effects of a few hours duration (Krivsky, 1969). These post-flare absorption effects in cosmic noise are evidently analogous with PCA effects (polar cap absorption) and are connected with ionospheric absorption of radio cosmic noise, caused by fast particles of subcosmic radiation. The recording of long term absorption effects after large particle flares at European midlatitudes was reported at the beginning of the 1960s. It was then usual to record radio cosmic noise with riometers at frequencies of about 18 MHz in the polar or subpolar regions in an effort to record PCA effects of subcosmic radiation (Hakura, 1968). An attempt was made to record the complex of emissions mentioned as well as the effects in a new frequency range (30 MHz), which did not agree with the ideas of the contemporaneous representatives of the Ionospheric Department of the Geophysical Institute in Prague. In recent years radio cosmic noise has been recorded at the Upice Observatory. These long term after flare effects of cosmic radio noise absorption (AF-CNA) at middle latitudes are reported to the geophysical and ionospheric community for the first time.

Krivsky, L.↗

Performance Of The Split-Symbol Moments Estimator

Report presents analysis of performance of Split-Symbol Moments Estimator (SSME) algorithm. Designed to estimate symbol signal-to-noise ratio of radio signal modulated by binary data pulses of period T and received in presence of additive white Gaussian noise. Incoming signal and noise first filtered, then sampled Ns - T/Ts times per symbol period. This study focuses on performance of SSME in case in which frequency width limited by digital filter and inter-symbol interference is thereby generated.

Shah, Biren N.↗