Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quenching limits”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Drive dependence of the Hall angle for a sliding Wigner crystal in a magnetic field

We numerically examine the depinning and sliding dynamics of a Wigner crystal in the presence of quenched disorder and a magnetic field. In the disorder-free limit, the Wigner crystal Hall angle is independent of crystal velocity, but when disorder is present, we find that the Hall angle starts near zero at the depinning threshold and increases linearly with increasing drive before reaching a saturation close to the disorder free value at the highest drives. The drive dependence is the result of a side jump effect produced when the charges move over pinning sites. The magnitude of the side jump is reduced at the higher velocities. Here, the drive dependent Hall angle is robust for a wide range of disorder parameters and should be a generic feature of classical charges driven in the presence of quenched disorder and a magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Green Synthesized Carbon Quantum Dots from Polianthes tuberose L. Petals for Copper (II) and Iron (II) Detection

In this work carbon quantum dots (CQDs) are synthesized via a simple, low cost and as well as green way using tuberose (Polianthes tuberose L.) petals as the carbon source for the first time. We have not done any surface modification to the prepared CQDs although we directly employed this as fluorescent probe for the sensitive and selective detection of Fe{sup 2+} and Cu{sup 2+} ions. Both these ions drastically quench the emission intensity of the CQDs; in case of Cu{sup 2+} ions quenched CQDs EDTA results in regaining the fluorescence property but for Fe{sup 2+} ions quenched CQDs no such effect of EDTA is found. The limit of detection (LOD) is observed to be 200 nM in case of Cu{sup 2+} which is much lower than the safe limit provided by the WHO in drinking water. Hence the CQDs prepared in this simple and low cost method may find an important role in monitoring the water quality. The quantum yield of the CQDs prepared in our method is around 3%. Transmission electron microscope shows picture of nicely shaped CQDs with average size ~ 4 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Determinant quantum Monte Carlo study of exhaustion in the periodic Anderson model

The Kondo and periodic Anderson models describe many of the qualitative features of local moments coupled to a conduction band, and thereby the physics of materials such as the heavy fermions. In particular, when the exchange coupling J or hybridization V between the moments and the electrons of the metallic band is large, singlets form, quenching the magnetism. In the opposite, small J or V, limit, the moments survive and the conduction electrons mediate an effective interaction which can trigger long-range, often antiferromagnetic order. In the case of the Kondo model, where the moments are described by local spins, Nozières considered the possibility that the available conduction electrons within the Kondo temperature of the Fermi surface would be insufficient in number to accomplish the screening. Much effort in the literature has been devoted to the study of the temperature scales in the resulting “exhaustion” problem and how the “coherence temperature” where a heavy Fermi liquid forms is related to the Kondo temperature. Here, we study a version of the periodic Anderson model in which some of the conduction electrons are removed in a way which avoids the fermion sign problem and hence allows low-temperature quantum Monte Carlo simulations which can access both singlet formation and magnetic ordering temperature scales. Finally, we are then able to focus on a somewhat different aspect of exhaustion physics than previously considered: the effect of dilution on the critical V for the singlet-antiferromagnetic transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of Nb3Sn multicell cavity coatings

Nb3Sn films have the potential to replace niobium in SRF cavities. Besides single-cell cavity efforts to improve Nb3Sn films, we are working to replicate single-cell results onto the practical 5-cell CEBAF cavities. High quality factors (10E11 @ 2.0K and 10E10 @ 4.3 K) have been measured, but the cavities are typically limited by strong low-field Q-slopes and quenches. Two of the cavities were selected to be assembled into a "mock-up" cavity string unit, the standard step before installation into a cryomodule. Comparison of test results between VTA and pair test offered the first glimpse into post-processing effects on the cavity performance.

Eremeev, G.↗

Fracture Toughness of High-Cr Steels after Various Thermomechanical Treatments

This research aimed to improve the mechanical properties of high-Cr steels by developing new thermomechanical processes for application to advanced fast reactors. A simultaneous improvement of fracture toughness and strength was specifically targeted in the design of thermomechanical processing for various 9Cr and 12Cr steels. For the structural materials of fusion and fast reactors, the high-chromium steels with fine ferritic/martensitic (FM) structures are favored because of their high creep strength and excellent resistance to high-temperature radiation damage such as void swelling. After the traditional thermomechanical treatment consisting of normalizing, water quenching, and tempering, however, the high-Cr steels show limited mechanical properties at high temperatures, e.g., significant decrease of strength above ~450°C. Since the high-Cr steels are tempered at high temperatures (typically around 750°C), significant coarsening of the lath structure and carbides and annihilation of dislocations occur in the final thermomechanical treatment. It is believed that the high-temperature tempering can maximize the ductility of the FM steels, but their high-temperature strength is reduced and often with high-temperature fracture toughness. It is also likely that such a fully-tempered structure will demonstrate a lowered radiation resistance when compared to the steels with finer structures. This research was planned to explore new processing routes that can produce ultrafine microstructures and thus can improve the high-temperature mechanical properties of the high-Cr steels. In this research, three 9Cr steels and two 12Cr steels were selected and a series of new thermomechanical process treatments (TMTs) were designed and applied to the five steels to find the TMT routes that will result in increase of both strength and fracture toughness. It was demonstrated for HT-9 steels that some tailored TMTs increased or maintained the fracture toughness of the high-Cr steels while the treatments could significantly increase their strength to the level comparable to those of nanostructured ferritic alloys. This report compares the fracture toughness data of both 9Cr and 12Cr steels after various thermomechanical treatments with the reference data of similar steels. A two-step tempering route is selected for application to the high-Cr steels for reactor core structures.

36 MATERIALS SCIENCE↗

Fe-ni phase diagram

Alpha and gamma solubility limits in iron-nickel phase diagram at high temperatures - quench- and-anneal and diffusion couple techniques and electron probe microanalysis

PHASE DIAGRAM↗

Extinction of Solid Diffusion Flame in Microgravity: Details of Quenching and Blowoff Processes

Long duration microgravity experiments aboard the International Space Station determine diffusion flame extinction limits of PMMA spheres. Upon ignition from an electrically-heated coil, the 4-cm-diameter samples are exposed to forced flows ranging from 0.2 to 80 cm/s and an oxygen ranging from 13 to 28% in one atmosphere total pressure. Extinction is reached as oxygen concentration gradually decreases by natural depletion. Five extinction tests are presented at different flow velocities and oxygen concentrations. Quenching at low velocity is observed with the flame tip shrinking upstream and blowoff is observed when a hole forms in the flame at the forward flow stagnation point. However, these processes are not quasistatic. The quenching motion involves periodic flame tip pulsating toward downstream and shrinking upstream with a continually decreasing flame size at the end of each cycle. In blowoff, the flame base pulsates between the flame hole and the downstream location, although with far fewer cycles compared to quenching. The pulsations appear to be the result of a premixed flame front spreading into a combustible mixture. Two specific cases are discussed. In the first, at very low flow velocity (~ 0.4 cm/s) and elevated oxygen, self-sustained flame tip cyclic pulsations are observed for a lengthy period (~15 minutes). In the second case with a higher flow velocity (50 cm/s), the diffusion flame is stabilized at the shoulder of the spherical sample after local stagnation point blowoff. With steady decrease in ambient oxygen due to depletion, spinning flamelets are formed. The long-duration microgravity environment makes it possible to observe. these interesting and detailed extinction processes.

Flame quenching↗

Magnetic-Field-Induced Insulator-Conductor Transition in SU(2) Quenched Lattice Gauge Theory

We study the correlator of two vector currents in quenched SU(2) lattice gauge theory with a chirally invariant lattice Dirac operator with a constant external magnetic field. It is found that in the confinement phase the correlator of the components of the current parallel to the magnetic field decays much slower than in the absence of a magnetic field, while for other components the correlation length slightly decreases. We apply the maximal entropy method to extract the corresponding spectral function. In the limit of zero frequency this spectral function yields the electric conductivity of quenched theory. We find that in the confinement phase the external magnetic field induces nonzero electric conductivity along the direction of the field, transforming the system from an insulator into an anisotropic conductor. In the deconfinement phase the conductivity does not exhibit any sizable dependence on the magnetic field.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High p-type doping, mobility, and photocarrier lifetime in arsenic-doped CdTe single crystals

Here, Group-V element doping is promising for simultaneously maximizing the hole concentration and minority carrier lifetime in CdTe for thin film solar cells, but there are roadblocks concerning point defects including the possibility of self-compensation by AX metastability. Herein, we report on doping, lifetime, and mobility of CdTe single crystals doped with As between 10 16 and 10 20 cm –3 grown from the Cd solvent by the travelling heater method. Evidence consistent with AX instability as a major contributor to compensation in samples doped below 10 17 cm –3 is presented, while for higher-doped samples, precipitation of a second phase on planar structural defects is also observed and may explain spatial variation in properties such as lifetime. Rapid cooling after crystal growth increases doping efficiency and mobility for times up to 20–30 days at room temperature with the highest efficiencies observed close to 45% and a hole mobility of 70 cm 2 /Vs at room temperature. A doping limit in the low 10 17 /cm 3 range is observed for samples quenched at 200–300 °C/h. Bulk minority carrier lifetimes exceeding 20 ns are observed for samples doped near 10 16 cm –3 relaxed in the dark and for unintentionally doped samples, while a lifetime of nearly 5 ns is observed for 10 18 cm –3 As doping. These results help us to establish limits on properties expected for group-V doped CdTe polycrystalline thin films for use in photovoltaics.

14 SOLAR ENERGY↗

Cooling arbitrary near-critical systems using hyperbolic quenches

We describe a quench protocol that allows the rapid preparation of ground states of arbitrary interacting conformal field theories in 1+1 dimensions. We start from the ground state of a related gapped relativistic quantum field theory and consider sudden quenches along the spacelike trajectories t 2 – x 2 = $T$ $^{2}_{0}$ (parameterized by T 0 ) to a conformal field theory. Using only arguments of symmetry and conformal invariance, we show that the post-quench stress-energy tensor of the conformal field theory is uniquely constrained up to an overall scaling factor. Crucially, the geometry of the quench necessitates that the system approach the vacuum energy density over all space except the singular lines x = ±t. Here, the above arguments are verified using an exact treatment of the quench for the Gaussian scalar field theory (equivalently the Luttinger liquid), and numerically for the quantum O(N) model in the large-N limit. Additionally, for the Gaussian theory, we find in fact that even when starting from certain excited states, the quench conserves entropy, and is thus also suitable for rapidly preparing excited states. Our methods serve as a fast, alternative route to reservoir-based cooling to prepare quantum states of interest.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theory of droplet. Part 1: Renormalized laws of droplet vaporization in non-dilute sprays

The vaporization of a droplet, interacting with its neighbors in a non-dilute spray environment is examined as well as a vaporization scaling law established on the basis of a recently developed theory of renormalized droplet. The interacting droplet consists of a centrally located droplet and its vapor bubble which is surrounded by a cloud of droplets. The distribution of the droplets and the size of the cloud are characterized by a pair-distribution function. The vaporization of a droplet is retarded by the collective thermal quenching, the vapor concentration accumulated in the outer sphere, and by the limited percolative passages for mass, momentum and energy fluxes. The retardation is scaled by the local collective interaction parameters (group combustion number of renormalized droplet, droplet spacing, renormalization number and local ambient conditions). The numerical results of a selected case study reveal that the vaporization correction factor falls from unity monotonically as the group combustion number increases, and saturation is likely to occur when the group combustion number reaches 35 to 40 with interdroplet spacing of 7.5 diameters and an environment temperature of 500 K. The scaling law suggests that dense sprays can be classified into: (1) a diffusively dense cloud characterized by uniform thermal quenching in the cloud; (2) a stratified dense cloud characterized by a radial stratification in temperature by the differential thermal quenching of the cloud; or (3) a sharply dense cloud marked by fine structure in the quasi-droplet cloud and the corresponding variation in the correction factor due to the variation in the topological structure of the cloud characterized by a pair-distribution function of quasi-droplets.

Chiu, H. H.↗

Quench Studies of Six High Temperature Nitrogen Doped 9 Cell Cavities for Use in the LCLS-II Baseline Prototype Cryomodule at Jefferson Laboratory

Jefferson Lab (JLab) processed six nine-cell cavities as part of a small-scale production for LCLS-II cavity processing development utilizing the promising nitrogen-doping process. Various nitrogen-doping recipes have been scrutinized to optimize process parameters with the aim to guarantee an unloaded quality factor (Q_0) of 2.7∙10 10 at an accelerating field (Eacc) of 16 MV/m at 2.0 K in the cryomodule. During the R&D phase the characteristic Q0 vs. Eacc performance curve of the cavities has been measured in JLab’s vertical test area at 2 K. The findings showed the characteristic rise of the Q0 with Eacc as expected from nitrogen-doping. Initially, five cavities achieved an average Q0 of 3.3·10 10 at the limiting Eacc averaging to 16.8 MV/m, while one cavity experienced an early quench accompanied by an unusual Q_0 vs. Eacc curve. The project accounts for a cavity performance loss from the vertical dewar test (with or without the helium vessel) to the horizontal performance in a cryomodule, such that these results leave no save margin to the cryomodule specification. Consequently, a refinement of the nitrogen-doping has been initiated to guarantee an average quench field above 20 MV/m without impeding the Q_0. This paper covers the refinement work performed for each cavity, which depends on the initial results, as well as a quench analysis carried out before and after the rework during the vertical RF tests as far as applicable.

43 PARTICLE ACCELERATORS↗

Nonequilibrium Steady-State Transport in Quantum Impurity Models: A Thermofield and Quantum Quench Approach Using Matrix Product States

Here, the numerical renormalization group (NRG) is tailored to describe interacting impurity models in equilibrium, but it faces limitations for steady-state nonequilibrium, arising, e.g., due to an applied bias voltage. We show that these limitations can be overcome by describing the thermal leads using a thermofield approach, integrating out high energy modes using NRG, and then treating the nonequilibrium dynamics at low energies using a quench protocol, implemented using the time-dependent density matrix renormalization group. This yields quantitatively reliable results for the current (with errors ≲3%) down to the exponentially small energy scales characteristic of impurity models. We present results of benchmark quality for the temperature and magnetic field dependence of the zero-bias conductance peak for the single-impurity Anderson model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CONNECTING STAR FORMATION QUENCHING WITH GALAXY STRUCTURE AND SUPERMASSIVE BLACK HOLES THROUGH GRAVITATIONAL HEATING OF COOLING FLOWS

Recent observations suggested that star formation quenching in galaxies is related to galaxy structure. Here we propose a new mechanism to explain the physical origin of this correlation. We assume that while quenching is maintained in quiescent galaxies by a feedback mechanism, cooling flows in the hot halo gas can still develop intermittently. We study cooling flows in a large suite of around 90 hydrodynamic simulations of an isolated galaxy group, and find that the flow development depends significantly on the gravitational potential well in the central galaxy. If the galaxy's gravity is not strong enough, cooling flows result in a central cooling catastrophe, supplying cold gas and feeding star formation to galactic bulges. When the bulge grows prominent enough, compressional heating starts to offset radiative cooling and maintains cooling flows in a long-term hot mode without producing a cooling catastrophe. Our model thus describes a self-limited growth channel for galaxy bulges and naturally explains the connection between quenching and bulge prominence. In particular, we explicitly demonstrate that M{sub ∗}/R{sub eff}{sup 1.5} is a good structural predictor of quenching. We further find that the gravity from the central supermassive black hole also affects the bimodal fate of cooling flows, and we predict a more general quenching predictor to be M{sub bh}{sup 1.6}M{sub ∗}/R{sub eff}{sup 1.5}, which may be tested in future observational studies.

79 ASTRONOMY AND ASTROPHYSICS↗

THE WiggleZ DARK ENERGY SURVEY: GALAXY EVOLUTION AT 0.25 {<=} z {<=} 0.75 USING THE SECOND RED-SEQUENCE CLUSTER SURVEY

We study the evolution of galaxy populations around the spectroscopic WiggleZ sample of star-forming galaxies at 0.25 {<=} z {<=} 0.75 using the photometric catalog from the Second Red-Sequence Cluster Survey (RCS2). We probe the optical photometric properties of the net excess neighbor galaxies. The key concept is that the marker galaxies and their neighbors are located at the same redshift, providing a sample of galaxies representing a complete census of galaxies in the neighborhood of star-forming galaxies. The results are compared with those using the RCS WiggleZ Spare-Fibre (RCS-WSF) sample as markers, representing galaxies in cluster environments at 0.25 {<=} z {<=} 0.45. By analyzing the stacked color-color properties of the WiggleZ neighbor galaxies, we find that their optical colors are not a strong function of indicators of star-forming activities such as EW([O II]) or Galaxy Evolution Explorer (GALEX) near-UV luminosity of the markers. The galaxies around the WiggleZ markers exhibit a bimodal distribution on the color-magnitude diagram, with most of them located in the blue cloud. The optical galaxy luminosity functions (GLFs) of the blue neighbor galaxies have a faint-end slope {alpha} of {approx} - 1.3, similar to that for galaxies in cluster environments drawn from the RCS-WSF sample. The faint-end slope of the GLF for the red neighbors, however, is {approx} - 0.4, significantly shallower than the {approx} - 0.7 found for those in cluster environments. This suggests that the buildup of the faint end of the red sequence in cluster environments is in a significantly more advanced stage than that in the star-forming and lower galaxy density WiggleZ neighborhoods. We find that the red galaxy fraction (f{sub red}) around the star-forming WiggleZ galaxies has similar values from z {approx} 0.3 to z {approx} 0.6 with f{sub red} {approx} 0.28, but drops to f{sub red} {approx} 0.20 at z {approx}> 0.7. This change of f{sub red} with redshift suggests that there is either a higher rate of star-forming galaxies entering the luminosity-limited sample at z {approx}> 0.7, or a decrease in the quenching rate of star formation at that redshift. Comparing to that in a dense cluster environment, the f{sub red} of the WiggleZ neighbors is both considerably smaller and has a more moderate change with redshift, pointing to the stronger and more prevalent environmental influences on galaxy evolution in high-density regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Status of Superconducting Magnet System for the J-PARC Neutrino Beam Line

The superconducting magnet system for the J-PARC neutrino beam line for the T2K experiment has been served for the beam operation without serious disturbance since April 2009. Present most concern of the system is the operational current limit of superconducting corrector magnets for beam steering due to systematic quenches at lower currents. Operational experience of the magnet system and examples of troubleshoot including countermeasures against the corrector magnet quenches are presented.

99 GENERAL AND MISCELLANEOUS↗

Geometric Optimization of the 56MHz SRF Cavity and its Frequency Table

It is essential to know the frequency of a Superconducting Radio Frequency (SRF) cavity at its “just being fabricated” stage because frequency is the key parameter in constructing the cavity. In this paper, we report our work on assessing it. We can estimate the frequency change from stage to stage theoretically and/or by simulation. At the operating stage, the frequency can be calculated accurately, and, from this value, we obtain the frequencies at other stages. They are listed in a table that serves to check the processes from stage to stage. Equally important is optimizing the geometric shape of the SRF cavity so that the peak electric-field and peak magnetic-field are as low as possible. It is particularly desirable in the 56MHz SRF cavity of RHIC to maximize the frequency sensitivity of the slow tuner. After undertaking such optimization, our resultant peak electric-field is only 35.3MV/m, and the peak magnetic-field is 840G at 2MV of voltage across the cavity gap. To quench superconductivity in an SRF cavity, it is reported that the limit of the peak magnetic-field is 1800G [1], and that of the peak electric-field is more than 100MV/m for a SRF cavity [2]. Naturally, for the complex geometry of this cavity (including numerous electron beam welds) and 4.2K operations we do not expect record field performance, but a useful 2 MV gap voltage is reasonable to expect. Our simulations employed the codes Superfish and Microwave Studio.

43 PARTICLE ACCELERATORS↗

Geometric optimization of the 56 MHz SRF cavity and its frequency table

It is essential to know the frequency of a Superconducting Radio Frequency (SRF) cavity at its 'just being fabricated' stage because frequency is the key parameter in constructing the cavity. In this paper, we report our work on assessing it. We can estimate the frequency change from stage to stage theoretically and/or by simulation. At the operating stage, the frequency can be calculated accurately, and, from this value, we obtain the frequencies at other stages. They are listed in a table that serves to check the processes from stage to stage. Equally important is optimizing the geometric shape of the SRF cavity so that the peak electric-field and peak magnetic-field are as low as possible. It is particularly desirable in the 56MHz SRF cavity of RHIC to maximize the frequency sensitivity of the slow tuner. After undertaking such optimization, our resultant peak electric-field is only 44.1MV/m, and the peak magnetic-field is 1049G at 2.5MV of voltage across the cavity gap. To quench superconductivity in an SRF cavity, it is reported that the limit of the peak magnetic-field is 1800G [1], and that of the peak electric-field is more than l00MV/m for a SRF cavity [2]. Our simulations employed the codes Superfish and Microwave Studio.

43 PARTICLE ACCELERATORS↗