Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pupil”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Wedge immersed thermistor bolometers

An immersed thermistor bolometer for the detection of ultraviolet, visible, and infrared radiation is described. Two types of immersed bolometers are discussed. The immersion of thermistor flakes in a lens, or half immersed by optical contact on a lens, is examined. Lens materials are evaluated for optimum immersion including fused aluminum oxide, beryllium oxide, and germanium. The application of the bolometer to instruments in which the entrance pupil of the immersion optics has a high aspect ratio is considered.

Dreyfus, M. G.↗

Geometries and focal properties of two electron-lens systems useful in low-energy electron or ion scattering

Geometries and focal properties are given for two types of electron-lens system commonly needed in electron scattering. One is an electron gun that focuses electrons from a thermionic emitter onto a fixed point (target) over a wide range of final energies. The other is an electron analyzer system that focuses scattered electrons of variable energy onto a fixed position (e.g., the entrance plane of an analyzer) at fixed energy with a zero final beam angle. Analyzer-system focusing properties are given for superelastically, elastically, and inelastically scattered electrons. Computer calculations incorporating recent accurate tube-lens focal properties are used to compute lens voltages, locations and diameters of all pupils and windows, filling factors, and asymptotic rays throughout each lens system. Focus voltages as a function of electron energy and energy change are given, and limits of operation of each system discussed. Both lens systems have been in routine use for several years, and good agreement has been consistently found between calculated and operating lens voltages.

Chutjian, A.↗

Advanced transport operation effects on pilot scan patterns

Long straight-in and close-in, curved, descending instrument approaches were made in NASA's fixed-base Terminal Configured Vehicle simulator. The pilot either manually controlled the simulator or monitored the automatic system control of the simulated aircraft during the approach. Tests were performed with or without the display of traffic. The results indicate that the pilots' use of the Electronic Horizontal Situation Indicator (EHSI) increased appreciably for the close-in, curved, descending approach compared to the conventional straight-in approach. When operating as a monitor of the autopilot system, the pilot scanned around more with less attention devoted to the Electronic Attitude Direction Indicator (EADI). The pilots preferred the manual mode because it kept them in the control loop. The addition of displayed traffic to the EHSI increased the pilots' use of the EHSI with a corresponding reduction in his use of the EADI. Also, the pilot's pupil diameter increased during the landing flare indicating a higher stress level even though the tests were conducted in a fixed-base simulator.

Harris, R. L., Sr.↗

Space Telescope fine guidance - A design for manufacturability

The NASA Space Telescope (ST) is a 2.4-m aperture, f/24 Ritchey-Chretien telescope coupled to five on-board astronomical scientific packages. The very accurate line-of-sight stability required by ST during operating periods of up to 24 hours is maintained by the Pointing Control System whose optical system, the Fine Guidance Subsystem (FGS), is described. The Pointing Control System includes three identical FGSs, any two of which provide line-of-sight stabilization by tracking guide stars while the third performs astrometry. The optical system for the ST FGS performs the field aberration correction within the FGS near a pupil plane measuring only 52.7 mm. The design is simple and easily corrected, and offers substantial advantages over the traditional approach in terms of manufacturability.

Friedman, I.↗

Saturn's E ring

Observations of the tenuous E ring of Saturn made by an earth-based CCD system at the time of the ring-plane crossing of March 1980 are presented. The observations were made with the CCD system attached to the 1.8-m Perkins reflector at Lowell Observatory using a pupil mask behind a focal plane mask to suppress telescopic diffraction. Photometric analysis of the CCD images reveal the edge-on brightness profile of the ring, beginning at a distance of 3 Saturn radii, to peak sharply in the vicinity of the orbit of Enceladus at about 4 Saturn radii, then decrease to a distance of over 8 Saturn radii. In addition, beyond Enceladus, the edge-on width of the ring is observed to increase with radial distance, reaching nearly 5 arcsec at 7 Saturn radii. Observations suggest, on the one hand, that the E ring is associated with Enceladus and possibly represents material ejected from the satellite, and on the other, that the ring is at an early stage in its evolution.

Baum, W. A.↗

Sky input horn for a far-infrared interferometer

A unique design has been developed whereby a compound parabolic concentrator (CPC) and a compound elliptical concentrator (CEC) are joined at their throats. The CPC serves as the field-defining optics, in that it accepts up to a certain maximum acceptance angle and then concentrates this accepted energy at its throat. Energy incident from angles greater than the acceptance angle is rejected. The CEC takes the energy concentrated at the CPC throat and then redirects this energy into a finite-sized pupil a given distance away. The considered design will be used as the sky input horn for a cryogenic far-infrared polarizing interferometer to be flown on NASA's Cosmic Background Explorer satellite. The interferometer will operate at 2 K and measure the 3-K cosmic background radiation of the universe in the 100-micrometer-1-cm spectral range.

Miller, M. S.↗

A recursive algorithm for Zernike polynomials

The analysis of a function defined on a rotationally symmetric system, with either a circular or annular pupil is discussed. In order to numerically analyze such systems it is typical to expand the given function in terms of a class of orthogonal polynomials. Because of their particular properties, the Zernike polynomials are especially suited for numerical calculations. Developed is a recursive algorithm that can be used to generate the Zernike polynomials up to a given order. The algorithm is recursively defined over J where R(J,N) is the Zernike polynomial of degree N obtained by orthogonalizing the sequence R(J), R(J+2), ..., R(J+2N) over (epsilon, 1). The terms in the preceding row - the (J-1) row - up to the N+1 term is needed for generating the (J,N)th term. Thus, the algorith generates an upper left-triangular table. This algorithm was placed in the computer with the necessary support program also included.

Davenport, J. W.↗

Absolute radiometric calibration of advanced remote sensing systems

The distinction between the uses of relative and absolute spectroradiometric calibration of remote sensing systems is discussed. The advantages of detector-based absolute calibration are described, and the categories of relative and absolute system calibrations are listed. The limitations and problems associated with three common methods used for the absolute calibration of remote sensing systems are addressed. Two methods are proposed for the in-flight absolute calibration of advanced multispectral linear array systems. One makes use of a sun-illuminated panel in front of the sensor, the radiance of which is monitored by a spectrally flat pyroelectric radiometer. The other uses a large, uniform, high-radiance reference ground surface. The ground and atmospheric measurements required as input to a radiative transfer program to predict the radiance level at the entrance pupil of the orbital sensor are discussed, and the ground instrumentation is described.

Slater, P. N.↗

High speed multi focal plane optical system

An apparatus for eliminating beamsplitter generated optical aberrations in a pupil concentric optical system providing a plurality of spatially separated images on different focal planes or surfaces is presented. The system employs a buried surface beamsplitter having spherically curved entrance and exit faces which are concentric to a system aperture stop with the entrance face being located in the path of a converging light beam directed there from an image forming objective element which is also concentric to the aperture stop.

Minott, P. O.↗

Design and tolerance analysis of two null corrector designs for the Space Telescope fine guidance aspheric collimating mirror

The collimating mirror within the Fine Guidance Subsystem of the Space Telescope's Pointing Control System is aspherized in order to correct the pupil aberration. A null corrector is needed to test the collimating mirror in autocollimation. Triplet and doublet null corrector designs are subjected to tolerance sensitivity analyses, and the doublet design is chosen despite its more restricted tolerances because of its compactness and simplicity.

Friedman, I.↗

Projection moire for remote contour analysis

Remote projection and viewing of moire contours are examined analytically for a system employing separate projection and viewing optics, with specific attention paid to the practical limitations imposed by the optical systems. It is found that planar contours are possible only when the optics are telecentric (exit pupil at infinity) but that the requirement for spatial separability of the contour fringes from extraneous fringes is independent of the specific optics and is a function only of the angle separating the two optic axes. In the nontelecentric case, the contour separation near the object is unchanged from that of the telecentric case, although the contours are distorted into low-eccentricity (near-circular) ellipses. Furthermore, the minimum contour spacing is directly related to the depth of focus through the resolution of the optics.

Doty, J. L.↗

Space telescope low scattered light camera - A model

A design approach for a camera to be used with the space telescope is given. Camera optics relay the system pupil onto an annular Gaussian ring apodizing mask to control scattered light. One and two dimensional models of ripple on the primary mirror were calculated. Scattered light calculations using ripple amplitudes between wavelength/20 wavelength/200 with spatial correlations of the ripple across the primary mirror between 0.2 and 2.0 centimeters indicate that the detection of an object a billion times fainter than a bright source in the field is possible. Detection of a Jovian type planet in orbit about alpha Centauri with a camera on the space telescope may be possible.

Breckinridge, J. B.↗

Optical design of the Diffuse Infrared Background Experiment for NASA's Cosmic Background Explorer

The conceptual design for a ten-band absolute filter photometer (the Diffuse Infrared Background Experiment) to operate at 2 K and measure galactic and extragalactic infrared radiation in the 1 to 300-micron range and polarization in the 1 to 3.5-micron range is presented, as part of the NASA Cosmic Background Explorer. The telescope optical design, a Gregorian design incorporating bafffles and shades to provide high stray-light rejection, is described. Pupil nonuniformity in the detector-assembly optical design has been limited. It is determined that detector sensitiity requirements can be met, and that the problem of radiation-induced responsivity variations can be solved by minimizing detector-assembly size, providing for in situ thermal annealing, and allowing for frequent detector calibration. Limitations on mirror performance are to be met by fabricating mirrors and structure from the same aluminum 6061 ingot.

Miller, M. S.↗

Design considerations for a real-time ocular counterroll instrument

A real-time algorithm for measuring three-dimensional movement of the human eye, especially torsional movement, is presented. As its input, the system uses images of the eyeball taken at video rate. The amount of horizontal and vertical movement is extracted using a pupil tracking technique. The torsional movement is then measured by computing the discrete cross-correlation function between the circular samples of successive images of the iris patterns and searching for the position of the peak of the function. A local least square interpolation around the peak of the cross-correlation function is used to produce nearly unbiased estimates of torsion angle with accuracy of about 3-4 arcmin. Accuracies of better than 0.03 deg are achievable in torsional measurement with SNR higher than 36 dB. Horizontal and vertical rotations of up to + or - 13 deg can occur simultaneously with torsion without introducing any appreciable error in the counterrolling measurement process.

Hatamian, M.↗

Absolute radiometric calibration of advanced remote sensing systems

The distinction between the uses of relative and absolute spectroradiometric calibration of remote sensing systems is discussed. The advantages of detector-based absolute calibration are described, and the categories of relative and absolute system calibrations are listed. The limitations and problems associated with three common methods used for the absolute calibration of remote sensing systems are addressed. Two methods are proposed for the in-flight absolute calibration of advanced multispectral linear array systems. One makes use of a sun-illuminated panel in front of the sensor, the radiance of which is monitored by a spectrally flat pyroelectric radiometer. The other uses a large, uniform, high-radiance reference ground surface. The ground and atmospheric measurements required as input to a radiative transfer program to predict the radiance level at the entrance pupil of the orbital sensor are discussed, and the ground instrumentation is described. Previously announced in STAR as N83-28544

Slater, P. N.↗

In-flight Absolute Radiometric Calibration of the Thematic Mapper

Ground spectral reflectance and atmospheric spectral optical depth measurements made at White Sands, New Mexico were used with an atmospheric radiative transfer program to determine the spectral radiance at the entrance pupil of the LANDSAT-4 TM. Comparison with the output digital counts of the TM, when imaging the measured ground area, provided an absolute calibration for five detectors in TM bands 2, 3, and 4. By reference to an adjacent, larger uniform area, the calibration was extended to all 16 detectors in each of three bands. Preflight calibration results agreed with these inflight measurements to 6.6%, 2.4%, and 12.9% in bands 2,3, and 4, respectively.

Palmer, J.↗

In-flight Absolute Radiometric Calibration of the Thematic Mapper

The Thematic Mapper (TM) multispectral scanner system was placed into Earth orbit on July 16, 1982, as part of NASA's LANDSAT 4 payload. To determine temporal changes of the absolute radiometric calibration of the entire system in flight, spectroradiometric measurements of the ground and the atmosphere are made simultaneously with TM image acquisitions over the White Sands, New Mexico area. By entering the measured values into an atmospheric radiative transfer program, the radiance levels at the entrance pupil of the TM in four of the TM spectral bands are determined. These levels are compared to the output digital counts from the detectors that sampled the radiometrically measured ground area, thus providing an absolute radiometric calibration of the entire TM system utilizing those detectors. By reference to an adjacent, larger uniform area, the calibration is extended to all 16 detectors in each of the three bands.

Castle, K. R.↗

A comparison of rating scale, secondary-task, physiological, and primary-task workload estimation techniques in a simulated flight task emphasizing communications load

Sixteen potential metrics of pilot mental workload were investigated regarding their sensitivity to communication load and their intrusion on primary-task performance. A moving-base flight simulator was used to present three cross-country flights. The flights varied only in the difficulty of the communications requirements. Rating scale measures were obtained immediately postflight; all others were taken over a 7-min segment of the flight task. The results indicated that both the Modified Cooper-Harper Scale and the workload Multi-descriptor Scale were sensitive to changes in communications load. The secondary-task measure of time estimation and the physiological measure of pupil diameter were also sensitive. As expected, those primary-task measures that were direct measures of communicative performance were also sensitive to load, whereas aicraft control primary-task measures were not, attesting to the task specificity of such measures. Finally, the intrusion analysis revealed no differential interference between workload measures.

Casali, J. G.↗