Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

N 2 O production and consumption from stable isotopic and concentration data in the Peruvian coastal upwelling system: N 2 O Production and Consumption off Peru

The ocean is an important source of nitrous oxide (N 2 O) to the atmosphere, yet the factors controlling N 2 O production and consumption in oceanic environments are still not understood nor constrained. We measured N 2 O concentrations and isotopomer ratios, as well as O 2 , nutrient and biogenic N 2 concentrations, and the isotopic compositions of nitrate and nitrite at several coastal stations during two cruises off the Peru coast (~5–16°S, 75–81°W) in December 2012 and January 2013. N 2 O concentrations varied from below equilibrium values in the oxygen deficient zone (ODZ) to up to 190nmol L -1 in surface waters. We used a 3-D-reaction-advection-diffusion model to evaluate the rates and modes of N 2 O production in oxic waters and rates of N 2 O consumption versus production by denitrification in the ODZ. Intramolecular site preference in N 2 O isotopomer was relatively low in surface waters (generally -3 to 14‰) and together with modeling results, confirmed the dominance of nitrifier-denitrification or incomplete denitrifier-denitrification, corresponding to an efflux of up to 0.6 Tg N yr -1 off the Peru coast. Other evidence, e.g., the absence of a relationship between ΔN 2 O and apparent O 2 utilization and significant relationships between nitrate, a substrate during denitrification, and N 2 O isotopes, suggest that N 2 O production by incomplete denitrification or nitrifier-denitrification decoupled from aerobic organic matter remineralization are likely pathways for extreme N 2 O accumulation in newly upwelled surface waters. We observed imbalances between N 2 O production and consumption in the ODZ, with the modeled proportion of N 2 O consumption relative to production generally increasing with biogenic N 2 . However, N 2 O production appeared to occur even where there was high N loss at the shallowest stations.

54 ENVIRONMENTAL SCIENCES↗

Vacuum Pyrolysis of Hybrid Poplar Milled Wood Lignin with Fourier Transform-Ion Cyclotron Resonance Mass Spectrometry Analysis of Feedstock and Products for the Elucidation of Reaction Mechanisms

The pyrolysis of lignocellulosic materials is a promising technique to produce fuels and chemicals. It is well known that the most abundant products of lignin pyrolysis are oligomeric molecules, known as pyrolytic lignin (PL). The chemical composition of PL has been extensively studied; however, there is still an important debate whether these oligomers are produced directly from the lignin or from the recombination of monomeric pyrolytic products. Existing theories are unable to describe the effect of vacuum on the distribution of pyrolysis products. Hybrid poplar milled wood lignin (MWL) was initially isolated and thoroughly characterized by Fourier transform-ion cyclotron resonance mass spectrometry (FT-ICR MS). Chemical formulas were assigned to each oligomeric compound detected. The MWL was also subjected to vacuum pyrolysis in a modified pyroprobe at 250, 750, and 1000 mbar (absolute pressure), and the resulting liquid products were analyzed by FT-ICR MS. A new strategy to assign structural representations to the oligomeric PL products is proposed, based on the plausible pyrolysis reaction mechanisms of depolymerization/fragmentation applied to original MWL oligomer formulas. Our results support the hypothesis that PL is formed from the removal of moieties from primary lignin pyrolysis products with between three and five aromatic rings. This depolymerization/fragmentation allows the oligomers to reduce their molecular weights to the point where they can be removed from the reaction zone by direct vaporization. Furthermore, this phenomenon highlights the importance of pressure on removal mechanisms and their impact on the molecular weight of the resulting products from lignin pyrolysis.

09 BIOMASS FUELS↗

The Chemical and Products Database, a resource for exposure-relevant data on chemicals in consumer products

Quantitative data on product chemical composition is a necessary parameter for characterizing near-field exposure. This data set comprises reported and predicted information on more than 75,000 chemicals and more than 15,000 consumer products. The data’s primary intended use is for exposure, risk, and safety assessments. The data set includes specific products with quantitative or qualitative ingredient information, which has been publicly disclosed through material safety data sheets (MSDS) and ingredient lists. A single product category from a refined and harmonized set of categories has been assigned to each product. The data set also contains information on the functional role of chemicals in products, which can inform predictions of the concentrations in which they occur. These data will be useful to exposure and risk assessors evaluating chemical and product safety.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plant-based engineering for production of high-valued natural products

Plants are a unique source of complex specialized metabolites, many of which play significant roles in human society. In many cases, however, the availability of these metabolites from naturally occurring sources fails to meet current demands. Thus, there is much interest in expanding the production capacity of target plant molecules. Traditionally, plant breeding, chemical synthesis, and microbial fermentation are considered the primary routes towards large scale production of natural products. Here, in this paper, we explore the advances, challenges, and future of plant engineering as a complementary path. Although plants are an integral part of our food and agricultural systems and sustain an extensive array of chemical constituents, their complex genetics and physiology have prevented the optimal exploitation of plants as a production chassis. We highlight emerging engineering tools and scientific advances developed in recent years that have improved the prospects of using plants as a sustainable and scalable production platform. We also discuss technological limitations and overall economic outlook of plant-based production of natural products.

59 BASIC BIOLOGICAL SCIENCES↗

A Systems Biology and Pond Culture-based Understanding and Improvement of Metabolic Processes Related to Productivity in Diverse Microalgal Classes for Viable Biofuel Production

The overarching goal of this project was to understand and manipulate fundamental molecular mechanisms involved in maximizing growth rate and lipid accumulation in diverse classes of microalgae under authentic diurnal conditions to enhance production capabilities for biofuels. The research was aimed at filling two critical knowledge gaps by addressing fundamental cellular issues that govern growth and fuel molecule accumulation in conjunction with realistic climate-simulated cultivation: 1) The insufficient understanding of the effect of metabolic topology on cellular carbon partitioning and its regulation with regards to productivity. 2) The understudied effect of the diurnal and cell cycles on cellular metabolism, resource allocation, and resource mobilization under simulated production conditions. To unravel broader as well as lineage-specific regulatory mechanisms that determine productivity, we compared green algae with diatoms. Complementing the systems approach with a pond-based cultivation method under authentic diurnal conditions, we anticipated an understanding of how the effect of diurnal and cell cycles affects growth and lipid productivity. Elucidation of the topology and regulation of relevant metabolic networks in proposed new model organisms was expected to enable improvements in functional capabilities and biosynthetic pathways. The major goals of the project were achieved by the following accomplishments. Genome assemblies and functional annotations for the green algae S. obliquus strain DOE0152Z and Coleastrella sp. strain DOE0202. Development of a metabolic map for the core carbon metabolism for S. obliquus. Analyzed the cellular topology for the core carbon network and proposed differences in core carbon metabolism for the Chlorophyceae versus the Trebouxiophyceae. Discovered the genes for enzymes involved in dicarboxylic acid metabolism and proposed the existence of C4-type metabolism for S. obliquus. Calculated the energy and reducing equivalencies for TAG and isoprenoid biosynthesis based on the core carbon network created in this project. Identified one newly created strain SOM-P004 (UV-Mutagenesis), which performed better at higher culture densities than wild type in LEAPS reactors under simulated environmental conditions. Results obtained within the course of this project were used in 2017 to apply for a Community Science Program (CSP) at the DOE Joint Genome Institute (JGI). The project (JGI Proposal Id: 503423) with the Title “Comparative genomics and germ plasm diversity in Acutodesmus, a green microalgal bioenergy feedstock candidate with potential for breeding and hybridization.” was selected for CSP 2018 for sequencing of up to 30 genomes of the alga A. obliquus (=S. obliquus). Our genome of the strain DOE0152Z serves as a reference for this new CSP project. Characterization of synchronized cultures of Cyclotella cryptica and the implications on productivity. Determination that some cellular pigments respond to light, but others to the cell cycle. Characterization of productivity of C. cryptica in PNNL ponds. Genome sequence and metabolic mapping of Marinichlorella kaistiae KAS603. Demonstration that some green algae store and utilize starch in the cytoplasm. Photorespiratory pathway clarified in T. pseudonana leading to a better understanding of carbon flux pathways in diatoms. Genome sequence determination, annotation, and comparison completed for C. cryptica, identifying potential metabolic differences that lead to high biomass and lipid accumulation ability for this species. Transcriptomic comparison of silicon (Si) and nitrogen (N) limited triacylglycerol accumulation in Cyclotella cryptica.

59 BASIC BIOLOGICAL SCIENCES↗

Development Of Sustainable Biobased Products And Bioenergy In Cooperation With The Midwest Consortium For Sustainable Biobased Products And Energy

Collaborative efforts of Midwest Consortium have been put forth to add value to distiller's grains by further processing them into fermentable sugars, ethanol, and a protein rich co-product consistent with a pathway to a biorenewables industry (Schell et al, 2008). These studies were recently published in the enclosed special edition (Volume 99, Issue 12) of Bioresource Technology journal. Part of them have demonstrated the utilization of distillers grains as additional feedstock for increased ethanol production in the current dry grind process (Kim et al., 2008a, b; Dien et al.,2008, Ladisch et al., 2008a, b). Results showed that both liquid hot water (LHW) pretreatment and ammonia fiber expansion (AFEX) were effective for enhancing digestibility of distiller's grains. Enzymatic digestion of distiller's grains resulted in more than 90% glucose yield under standard assay conditions, although the yield tends to drop as the concentration of dry solids increases. Simulated process mass balances estimated that hydrolysis and fermentation of distillers grains can increase the ethanol yield by 14% in the current dry milling process (Kim et al., 2008c). Resulting co-products from the modified process are richer in protein and oil contents than conventional distiller's grains, as determined both experimentally and computationally. Other research topics in the special edition include water solubilization of DDGS by transesterification reaction with phosphite esters (Oshel el al., 2008) to improve reactivity of the DDGS to enzymes, hydrolysis of soluble oligomers derived from DDGS using functionalized mesoporous solid catalysts (Bootsma et al., 2008), and ABE (acetone, butanol, ethanol) production from DDGS by solventogenic Clostridia (Ezeji and Blaschek, 2008). Economic analysis of a modified dry milling process, where the fiber and residual starch is extracted and fermented to produce more ethanol from the distillers grains while producing highly concentrated protein co-product, has shown that the process is economically viable resulting in an increase in net present value (Perkis et al., 2008). According to the study, the revenue is expected to increase further with improved amino acid profile of the protein rich co-products and lower cost of cellulase enzyme mixture. Also, Kim and Dale (2008) discuss using life cycle analysis to enhance the environmental performance of the corn based ethanol. On the second phase of the research, concerted efforts were directed on assessing compositional variability of dry milling co-products collected from 4 different dry grind ethanol plants has been measured and its effect on enzymatic digestibility and fermentability. Fermentation utilized a recombinant glucose/xylose co-fermenting yeast (Saccharomyces cerevisiae 424A (LNH-ST)). No significant compositional variability among the samples was found. Simultaneous saccharification and glucose/xylose co-fermentation of the pretreated distillers grains at solids and cellulase loadings of 150 g dry solids per liter and 6.4 mg protein per g dry substrate, respectively, yielded 74-801% of theoretical maximum ethanol concentration using recombinant Saccharomyces cerevisiae 424A (LNH-ST). The paper summarizing the results from the second phase of the Midwest Consortium is currently submitted to Bioresource Technology journal. The copy of the paper submitted is enclosed.

09 BIOMASS FUELS↗

Product Structure, the Heart of Product Definition

This paper describes the LMMSS Product Definition System (PDS) philosophy and approach were the use of each item parts document or software can be traced to a specific end item (EI) serial/tail number of the product. It explains why a part-oriented approach to data organization and configuration management is required. The definition of part-oriented is that all appropriate product definition data products will be collected. Referenced and managed by their linkage/relationship to parts/items, The paper will touch upon how LMMSS store/controls product definition information under each project's top product designator in a two tiered approach. One tier for each product end item and another tier which contain/controls listings of drawings, documents. Specifications and standards that are required for hardware item definition.

DeHoog, C., Jr.↗

BIOPLASTIC PRODUCTION FROM MICROALGAE WITH FUEL CO-PRODUCTS: A TECHNO-ECONOMIC AND LIFE-CYCLE ASSESSMENT

Concerns over depleting oil reserves and national security have spurred renewed vigor in developing bio-based products. One specific area of growing concern is the consumption of petroleum based plastics, which is expected to consume 20% of global annual oil by 2050. Algae systems represent a promising pathway for the development of a bioplastic feedstock but have many technological challenges. Algae-based plastics offer a promising alleviate that would decrease oil consumption, improve environmental impact, and in some cases even improve plastic performance. This study investigates the economic viability and environmental impact of an algae biorefinery that integrates the complementary functions of bioplastic and fuel production. The bioplastic and biofuel biorefinery modeled herein includes nine different production scenarios. Performance of the facility was validated based on experimental systems with modeling work focusing on mass and energy balances of all required sub-processes in the production pathway. Results show the minimum selling price of the bioplastic feedstock is within the realm of economic competition with prices as low as $970 USD tonne-1. Additionally, LCA results indicate drastic improvements in environmental performance of the produced bioplastic feedstock, with reductions ranging between 67-116% compared to petroleum based plastics. These results indicate that an algae biorefinery focused on bioplastic feedstock production and fuels has the potential to operate both economically and sustainably. Sensitivity analysis results, alternative co-products (given that fuels represent minimal value) and product market potential are discussed.

09 BIOMASS FUELS↗

Short-lived photofission product yields from 238 U and 232 Th at Bremsstrahlung X-ray endpoint energies of 8, 14, and 20 MeV for nuclear forensics isotope production applications

The existing photofission product yield data sets are often based on nuclear models, and limited experimental measurements of these fission product yields have been performed. These experiments resulted in measured cumulative fission product yields (CFPYs) for 238 U and 232 Th for the bremsstrahlung X-ray endpoint energies of 8, 14, and 20 MeV. The half-lives of the reported fission products range from 1.07–40.8 s. This work is motivated by a demonstrated need for novel isotope production methods for nuclear forensics and improved nuclear data to support the nonproliferation community. A high-purity germanium detector and a pneumatic transfer system were employed for measurements of short-lived fission products, collecting data between cycles of accelerator irradiation and measurement.

07 ISOTOPE AND RADIATION SOURCES↗

Searches for Leptoquark production in $p\bar{p}$ collisions at the D\O\ experiment

We report on searches for the production of scalar and vector leptoquarks in collisions at the Tevatron collider, which are based on integrated luminosities of up to 2.5 fb < 1 collected with the DOe detector. Searches for the pair-production of le ptoquarks of althree generations have been performed using the LQl+l < q, l-vq, and vvq, bb final states. Upper limits on the production cross sections are given and are used to derive lower limits on the leptoquark masses as a function of the branching f raction of the Leptoquark in a charged lepton and a quark and for different couplings.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of Ion Escape Velocity and Conversion Surface Material on H- Production

According to generally accepted models surface production of negative ions depends on ion escape velocity and work function of the surface. We have conducted an experimental study addressing the role of the ion escape velocity on H- production. A converter-type ion source at Los Alamos Neutron Science Center was employed for the experiment. The ion escape velocity was affected by varying the bias voltage of the converter electrode. It was observed that due to enhanced stripping of H- no direct gain of extracted beam current can be achieved by increasing the converter voltage. The conversion efficiency of H- was observed to vary with converter voltage and follow the existing theories in qualitative manner. We present calculations predicting relative H- yields from different cesiated surfaces with comparison to experimental observations from different types of H- ion sources. Utilizing materials exhibiting negative electron affinity and exposed to UV-light is considered for Cesium-free H-/D- production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of inclusive neutral current {pi}{sup 0} production on carbon in a few-GeV neutrino beam

The SciBooNE Collaboration reports inclusive neutral current neutral pion production by a muon neutrino beam on a polystyrene target (C{sub 8}H{sub 8}). We obtain (7.7{+-}0.5(stat){+-}0.5(sys))x10{sup -2} as the ratio of the neutral current neutral pion production to total charged current cross section; the mean energy of neutrinos producing detected neutral pions is 1.1 GeV. The result agrees with the Rein-Sehgal model implemented in our neutrino interaction simulation program with nuclear effects. The spectrum shape of the {pi}{sup 0} momentum and angle agree with the model. We also measure the ratio of the neutral current coherent pion production to total charged current cross section to be (0.7{+-}0.4)x10{sup -2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Next-to-leading order QCD corrections to s-channel single top quark production and decay at the LHC.

We present a study of electroweak production of top and antitop quarks in the s-channel mode at the LHC, including next-to-leading order QCD corrections to the production and decay of the single (anti)top quark. The spin is preserved in production and decay by using the narrow width approximation for the (anti)top quark. We show the effect of different O({alpha}{sub s}) contributions on the inclusive cross section and various kinematic distributions at parton level after imposing relevant kinematic cuts to select s-channel single top quark events. We also discuss several possibilities for measuring the top quark polarization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of transverse single-spin asymmetries for J/psi production in polarized p plus p collisions at root s=200 GeV

We report the first measurement of transverse single-spin asymmetries in J/{psi} production from transversely polarized p+p collisions at {radical}s = 200 GeV with data taken by the PHENIX experiment in 2006 and 2008. The measurement was performed over the rapidity ranges 1.2 < |y| < 2.2 and |y| < 0.35 for transverse momenta up to 6 GeV/c. J/{psi} production at the Relativistic Heavy Ion Collider is dominated by processes involving initial-state gluons, and transverse single-spin asymmetries of the J/{psi} can provide access to gluon dynamics within the nucleon. Such asymmetries may also shed light on the long-standing question in QCD of the J/{psi} production mechanism. Asymmetries were obtained as a function of J/{psi} transverse momentum and Feynman-x, with a value of -0.086 {+-} 0.026{sup stat} {+-} 0.003{sup syst} in the forward region. This result suggests possible nonzero trigluon correlation functions in transversely polarized protons and, if well defined in this reaction, a nonzero gluon Sivers distribution function.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Using HEM surveys to evaluate disposal of by-product water from CBNG development in the Powder River Basin, Wyoming

Production of methane from thick, extensive coal beds in the Powder River Basin ofWyoming has created water management issues. Since development began in 1997, more than 650 billion liters of water have been produced from approximately 22,000 wells. Infiltration impoundments are used widely to dispose of by-product water from coal bed natural gas (CBNG) production, but their hydrogeologic effects are poorly understood. Helicopter electromagnetic surveys (HEM) were completed in July 2003 and July 2004 to characterize the hydrogeology of an alluvial aquifer along the Powder River. The aquifer is receiving CBNG produced water discharge from infiltration impoundments. HEM data were subjected to Occam’s inversion algorithms to determine the aquifer bulk conductivity, which was then correlated to water salinity using site-specific sampling results. The HEM data provided high-resolution images of salinity levels in the aquifer, a result not attainable using traditional sampling methods. Interpretation of these images reveals clearly the produced water influence on aquifer water quality. Potential shortfalls to this method occur where there is no significant contrast in aquifer salinity and infiltrating produced water salinity and where there might be significant changes in aquifer lithology. Despite these limitations, airborne geophysical methods can provide a broadscale (watershed-scale) tool to evaluate CBNG water disposal, especially in areas where field-based investigations are logistically prohibitive. This research has implications for design and location strategies of future CBNG water surface disposal facilities within the Powder River Basin.

01 COAL, LIGNITE, AND PEAT↗

Rapid activation product separations from fission products and soil matrixes

We report that a rapid method for the separation and qualitative analysis of several neutron activation products ( 198 Au, 192 Ir, 72 Ga, 51 Cr, 191/195m/197 Pt, 54 Mn, 57 Co, and 59 Fe) from fission products and soil matrixes has been developed. Analytes were isolated within 20 h using ion exchange chromatography. After separation, the activation products were characterized by γ-spectroscopy and inductively coupled plasma-optical emission spectroscopy. Validation experiments demonstrated versatility of the method, showing that the activation products could be isolated from fresh fission products and other contaminants associated with complex soil matrixes.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Trapping and diffusion of fission products in ThO2 and CeO2

The trapping and diffusion of Br, Rb, Cs and Xe in ThO2 and CeO2 have been studied using an Ab Initio total energy method in the local-density approximation of density functional theory. Fission products incorporated in cation mono-vacancy, cation–anion di-vacancy and Schottky defect sites are found to be stable, with the cation mono-vacancy being the preferred site in most cases. In both oxides, Rb and Cs are the most likely to be trapped, and Xe is more difficult to incorporate than other fission products. The energy barriers for migration of each species in ThO2 and CeO2 are also calculated. Alkali metals are relatively more mobile than other fission products, and bromine is the least mobile.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗