Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polymer Electrolytes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

High-performance SO 2 -depolarized electrolysis cell using advanced polymer electrolyte membranes

Three different proton conducting polymeric membrane materials (Nafion® 115, Nafion® 212, and sulfonated Diels-Alder polyphenylene [SDAPP]) were evaluated for use in SO 2 -depolarized electrolyzers for the production of hydrogen via the hybrid sulfur cycle. Their performance was measured using different water feed strategies to minimize overpotential losses while maintaining high product acid concentration. Both thin membranes (Nafion® 212 and SDAPP) showed performance superior to that of the thicker Nafion® 115. Here, the SDAPP membrane electrode assembly (MEA) performed well at higher acid concentrations, maintaining low ohmic and kinetic overpotentials. Finally, short-term (100-h) stability tests under constant current conditions showed minimal degradation for the SDAPP and Nafion® 212 MEAs. SDAPP MEA performance approached the targets needed to make the hybrid sulfur cycle a competitive process for hydrogen production (product acid concentration ≥65 wt% H 2 SO 4 at ≤ 0.6-V cell potential and ≥0.5 A-cm –2 current density).

08 HYDROGEN↗
DOE OSTI2024

The impact of hot-press conditions on the durability of polymer electrolyte membrane fuel cells

The proton exchange membrane integrity can be compromised during hot-press fabrication of membrane electrode assemblies (MEAs) causing premature cell failures during operation. In this work, infrared (IR) thermography was used as a diagnostic tool to spatially visualize hydrogen (H 2 ) crossover and identify process-induced-membrane irregularities (PIMs). These irregularities were identified as seed locations for MEA failures. Fine tuning of hot-press conditions was used to mitigate premature cell failures informed by accelerated stress testing (AST). The impact of PIMs on the initial performance, high-frequency resistances, open-circuit voltage, and H 2 crossover are reported. Nafion XL and 212 membranes, hot-pressed with a force of 16 kg/cm 2 and temperature of 120°C, were found to be consistently irregularity-free. Irregularity-free MEAs using Nafion 211, 212, and XL membranes demonstrated AST lifetime improvements of 58, 64 and 400%, respectively, compared to those fabricated with non-optimized conditions. In conclusion, this work highlights the importance of fabrication parameters on premature cell failures.

08 HYDROGEN↗
DOE OSTI2020

Recent progress in the durability of Fe-N-C oxygen reduction electrocatalysts for polymer electrolyte fuel cells

This mini-review article review focuses on the very recent advancements in the stability and durability under operating fuel cell conditions of Fe-N-C electrocatalysts oxygen reduction reaction (ORR) catalysts. The most prominent degradation mechanisms of active site demetallation and carbon corrosion, both resulting in a relatively rapid initial performance loss, are introduced and elaborated on through recent published work, with emphasis on the role of H 2 O 2 radicals in these two likely catalysts degradation mechanisms. Here, the current state of Fe-N-C electrocatalysts is also discussed and several specific improvements are proposed as necessary to advance these materials towards a state of competitive stability and durability.

25 ENERGY STORAGE↗
DOE OSTI2020

Use of a segmented cell for the combinatorial development of platinum group metal-free electrodes for polymer electrolyte fuel cells

The development of novel platinum group metal (PGM)-free catalysts is a difficult task, particularly when coupled with the integration into a cathode catalyst layer (CCL). The optimization of such PGM-free electrode structures is often non-linear and iterative, making it a demanding task due to the high number of parameters that affect performance. To accelerate both materials discovery and electrode development, this work demonstrates the application of a high-resolution segmented cell (SC) with 121 segments of 0.413 cm 2 size for combinatorial high-throughput PGM-free catalyst screening and CCL optimization. The approach utilizes three flow-field strips with active areas of 4.45 cm 2 each, distributed over 11 segments. Electrodes with identical catalyst material and fabrication method result in reproducible data with typically less than 10% variation between each segment and match in performance with differential single cell data. High throughput testing of combinatorial sample sets, with varied PGM-free electrocatalyst materials or electrode composition, demonstrated the ability to rapidly discern high performing outliers, and establish or confirm trends in electrode optimization. The results indicated significant performance benefits of electrodes with ionomer content of 45 wt% over lower values, and of water rich inks with 82% water content over those with 50%.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Enhancing durability of polymer electrolyte membrane using cation size selective agents

Radical species generated during proton exchange membrane fuel cell operation considerably limit the achievable durability, particularly for heavy-duty vehicle applications. A promising solution to the problem is the incorporation of radical scavenger additives such as cerium which mitigates chemical attacks on the membrane. However, these additives migrate during fuel cell operation causing a loss in durability and performance due to detrimental interaction with various components of the fuel cell. Here, we study cation size selective agents as a means to immobilize cerium within perfluorosulfonic acid (PFSA) membranes. We synthesized an organometallic complex of cerium with 15-Crown-5 and investigated the effectiveness of this complex to immobilize cerium. Over 300% increase in cerium retention and an 80% increase in chemical durability were observed owing to the stabilization effect of crown ethers on cerium. Migration under a potential gradient can be eliminated while the complex also contributes to the enhancement in cerium radical scavenging activity. In conclusion, current challenges with the proposed solution are highlighted and future work is discussed.

25 ENERGY STORAGE↗
DOE OSTI2020

Effect of Dispersion Medium Composition and Ionomer Concentration on the Microstructure and Rheology of Fe–N–C Platinum Group Metal-free Catalyst Inks for Polymer Electrolyte Membrane Fuel Cells

In this paper, we present an investigation of the microstructure and rheological behavior of catalyst inks consisting of Fe–N–C platinum group metal-free catalysts and a perfluorosulfonic acid ionomer in a dispersion medium (DM) of water and 1-propanol ( n PA). The effects of the ionomer-to-catalyst (I/C) ratio and weight percentage of water (H 2 O %) in the DM on the ink microstructure were studied. Steady-shear and dynamic-oscillatory-shear rheology, in combination with synchrotron X-ray scattering, was utilized to understand interparticle interactions and the level of agglomeration of the inks. In the absence of the ionomer, the inks were significantly agglomerated, approaching a gel-like microstructure for catalyst concentrations as low as 2 wt %. The effect of H 2 O % in the DM on particle agglomeration was found to vary with particle concentration. In concentrated inks (≥2 wt % catalyst), increasing H 2 O % was found to increase agglomeration because of the hydrophobic nature of the catalysts. In dilute inks (<1 wt % catalyst), the trend was reversed with increasing H 2 O %, suggesting that electrostatic interactions are dominating the behavior. In inks with 5 wt % catalyst, the addition of an ionomer was found to significantly stabilize the catalyst against agglomeration. Maximum stability was observed at 0.35 I/C for all DM H 2 O % studied. At high ionomer concentrations (I/C > 0.35), interesting differences were observed between n PA-rich inks (H 2 O % ≤ 50%) and H 2 O-rich (82% H 2 O) inks. The n PA-rich inks remained predominantly stable—ink viscosity only weakly increased with I/C and the Newtonian behavior was maintained for I/C up to 0.9. In contrast, the H 2 O-rich inks exhibited a significant increase in viscoelasticity with increasing I/C, suggesting flocculation of the catalyst by the ionomer. These differences suggest that the nature of the interactions between the ionomer and catalyst is highly dependent on the H 2 O % in the DM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗