Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Performance analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Economic and Performance Analysis of Gear Box Failures. Cooperative Research and Development Final Report, CRADA Number CRD-07-236

The National Renewable Energy Laboratory (NREL) in Golden, CO, USA is forming a collaborative within the wind energy industry to address reliability issues on wind turbines. The National Wind Technology Center (NWTC), leading the collaborative effort, will allow gearbox manufacturers, bearing manufacturers, wind turbine owner/operators, and wind turbine manufacturers to team up for joint projects that address specific issues regarding design and reliability of wind turbine gearboxes. The primary means of investigation will be through full scale testing and analysis of actual gearboxes, both in the field and in the NREL 2.5 MW dynamometer test facility. These teams would contribute resources into a campaign that is intended to serve the mutual interests of a majority of the wind and gearbox industry stakeholders in addition to the specific project team objectives. that address specific issues regarding design and reliability of wind turbine gearboxes. The primary means of investigation will be through full scale testing and analysis of actual gearboxes, both in the field and in the NREL 2.5 MW dynamometer test facility. These teams would contribute resources into a campaign that is intended to serve the mutual interests of a majority of the wind and gearbox industry stakeholders in addition to the specific project team objectives.

17 WIND ENERGY↗
DOE OSTI2016

Performance Analysis of a Modular Small-Diamter Air Distribution System

This report investigates the feasibility of using a home-run manifold small-diameter duct system to provide space conditioning air to individual thermal zones in a low-load home. This compact layout allows duct systems to be brought easily within conditioned space via interior partition walls. Centrally locating the air handler unit in the house significantly reduces duct lengths. The plenum box is designed so that each connected duct receives an equal amount of airflow, regardless of the duct position on the box. Furthermore, within a reasonable set of length restrictions, each duct continues to receive similar airflow. The design method uses an additive approach to reach the total needed zonal airflow. Once the cubic feet per minute needed to satisfy the thermal load of a zone has been determined, the total number of duct runs to a zone can be calculated by dividing the required airflow by the standard airflow from each duct. The additive approach greatly simplifies the design effort and reduces the potential for duct design mistakes to be made. Measured results indicate that this plenum design can satisfy the heating load. However, the total airflow falls short of satisfying the cooling load in a hypothetical building. Static pressure inside the plenum box of 51.5 Pa limited the total airflow of the attached mini-split heat pump blower, thus limiting the total thermal capacity. Fan energy consumption is kept to 0.16 to 0.22 watt/CFM by using short duct runs and smooth duct material.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2016

Performance Analysis of a Modular Small-Diameter Air Distribution System

This report investigates the feasibility of using a home-run manifold small-diameter duct system to provide space-conditioning air to individual thermal zones in a low-load home. This compact layout allows duct systems to easily be brought within conditioned space via interior partition walls. Centrally locating the air handling unit in the house significantly reduces duct lengths. The plenum box is designed so that each connected duct receives a similar amount of airflow—regardless of its position on the box. Furthermore, within a reasonable set of length restrictions each duct continues to receive similar airflow.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2013

Ramping Performance Analysis of the Kahuku Wind-Energy Battery Storage System

High penetrations of wind power on the electrical grid can introduce technical challenges caused by resource variability. Such variability can have undesirable effects on the frequency, voltage, and transient stability of the grid. Energy storage devices can be an effective tool in reducing variability impacts on the power grid in the form of power smoothing and ramp control. Integrating anenergy storage system with a wind power plant can help smooth the variable power produced from wind. This paper explores the fast-response, megawatt-scale, wind-energy battery storage systems that were recently deployed throughout the Hawaiian islands to support wind and solar projects.

17 WIND ENERGY↗
DOE OSTI2022

SolarAPP+ Pilot Analysis: Performance and Impact of Instant, Online Solar Permitting

The National Renewable Energy Laboratory (NREL) led a collaborative effort to develop the Solar Automated Permit Processing Plus (SolarAPP+), a no-cost solar permitting software solution to address residential solar photovoltaic (PV) permitting resource constraints and streamline solar adoption processes among authorities having jurisdiction (AHJs). The SolarAPP+ is an online portal that automates permit plan review, enabling an instant permit approval process for code-compliant residential PV systems. Based on national model building, electrical, and fire codes, the SolarAPP+ automatically performs a compliance check of permit inputs against code requirements and produces an inspection checklist that can be used to verify installation practices, workmanship, and adherence to the approved design. NREL conducted a two-phase pilot with five participating AHJs and 16 solar contractors, spanning from November 2020 through December 2021, evaluating the ability of SolarAPP+ to deliver instant permits and its impact on four critical areas within each AHJ: permit review timelines; solar adoption timelines; AHJ time saved; and inspection results. The pilot confirmed that SolarAPP+ reduced permit review times to less than one day, reduced solar adoption timelines by an average of 12 days, saved an estimated 2,067 staff hours, and had comparable inspection results to those found in traditional permitting. The pilot further identified key lessons for improving SolarAPP+, including ways to streamline SolarAPP+ adoption, development of training resources, and expansion of supported products.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Machine Learning for Predictive Performance Analysis in Charged Particle Beam Tools

Imaging methods driven by probes, electrons, and ions have played a dominant role in modern science and engineering. Opportunities for machine vision and AI that focus on consumer problems like driving and feature recognition, are now presenting themselves for automating aspects of the scientific processes. This proposal aims to enable and drive discovery in ultra-low energy implantation by taking advantage of faster processing, flexible control and detection methods, and architecture-agnostic workflows that will result in higher efficiency and shorter scientific development cycles. Custom microscope control, collection and analysis hardware will provide a framework for conducting novel in situ experiments revealing unprecedented insight into surface dynamics at the nanoscale. Ion implantation is a key capability for the semiconductor industry. As devices shrink, novel materials enter the manufacturing line, and quantum technologies transition to being more mainstream. Traditional implantation methods fall short in terms of energy, ion species, and positional precision. Here we demonstrate 1 keV focused ion beam Au implantation into Si and validate the results via atom probe tomography. We show the Au implant depth at 1 keV is 0.8 nm and that identical results for low energy ion implants can be achieved by either lowering the column voltage, or decelerating ions using bias – while maintaining a sub-micron beam focus. We compare our experimental results to static calculations using SRIM and dynamic calculations using binary collision approximation codes TRIDYN and IMSIL. A large discrepancy between the static and dynamic simulation is found that is due to lattice enrichment with high stopping power Au and surface sputtering. Additionally, we demonstrate how model details are particularly important to the simulation of these low-energy heavy-ion implantations. Finally, we discuss how our results pave a way to much lower implantation energies, while maintaining high spatial resolution.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

Environmental Performance Analysis of Cement Production with CO 2 Capture and Storage Technology in a Life-Cycle Perspective

Cement manufacturing is one of the most energy and CO 2 intensive industries. With the growth of cement production, CO 2 emissions are increasing rapidly too. Carbon capture and storage is the most feasible new technology option to reduce CO 2 emissions in the cement industry. More research on environmental impacts is required to provide the theoretical basis for the implementation of carbon capture and storage in cement production. In this paper, GaBi software and scenario analysis were employed to quantitatively analyze and compare the environmental impacts of cement production with and without carbon capture and storage technology, from the perspective of a life-cycle assessment; aiming to promote sustainable development of the cement industry. Results of two carbon capture and storage scenarios show decreases in the impacts of global warming potential and some environmental impacts. However, other scenarios show a significant increase in other environmental impacts. In particular, post-combustion carbon capture technology can bring a more pronounced increase in toxicity potential. Therefore, effective measures must be taken into account to reduce the impact of toxicity when carbon capture and storage is employed in cement production. CO 2 transport and storage account for only a small proportion of environmental impacts. For post-combustion carbon capture, most of the environmental impacts come from the unit of combined heat and power and carbon capture, with the background production of MonoEthanolAmine contributing significantly. In combined heat and power plants, natural gas is more advantageous than a 10% coal-saving, and thermal efficiency is a key parameter affecting the environmental impacts. Future research should focus on exploring cleaner and effective absorbents or seeking the alternative fuel in combined heat and power plants for post-combustion carbon capture. If the power industry is the first to deploy carbon capture and storage, oxy-combustion carbon capture is an excellent choice for the cement industry.

36 MATERIALS SCIENCE↗