Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pd”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Ambient pressure x-ray photoelectron spectroscopy study of water formation and adsorption under two-dimensional silica and aluminosilicate layers on Pd(111)

Ambient pressure x-ray photoelectron spectroscopy (AP-XPS) supported by density functional theory (DFT) calculations was used to characterize the interaction of water with two-dimensional (2D) silica and aluminosilicate bilayers on Pd(111). Starting with oxygen adsorbed at the SiO2/Pd interface, exposure to water caused the SiO 2 -derived XPS peaks to shift to higher binding energy and the removal of an O 1s feature associated with interfacial adsorbed oxygen. These observations were attributed to the formation of a mixed water–hydroxyl interface, which eliminates the interfacial dipolar layer, and its associated electrostatic potential, created by adsorbed oxygen. Interfacial oxygen also reacted with H 2 to produce adsorbed water which also caused an upward binding energy shift of the SiO 2 peaks. Spectra recorded under 0.5 Torr water revealed additional water adsorption and a further shift of the overlayer peaks to higher binding energy. Incorporating Al into the 2D material caused the bilayer peaks to shift to lower binding energy which could be explained by electron donation from the metal to the bilayer. Although the stronger interaction between the bilayer and Pd substrate should restrict interfacial adsorption and reaction, similar trends were observed for water and hydrogen exposure to interfacial adsorbed oxygen. Less water adsorption was observed at the aluminosilicate interface which is a consequence of Al strengthening the bond to the metal substrate. The results reveal how the sensitivity of XPS to interfacial dipoles can be exploited to distinguish reactions taking place in confined spaces under 2D layers and how tuning the composition of the 2D layer can impact such reactions.

Density functional theory↗
DOE OSTI2023

Atomistic mechanisms for catalytic transformations of NO to NH3, N2O, and N2 by Pd

The industrial pollutant NO is a potential threat to the environment and to human health. Thus, selective catalytic reduction of NO into harmless N2, NH3, and/or N2O gas is of great interest. Among many catalysts, metal Pd has been demonstrated to be most efficient for selectivity of reducing NO to N2. However, the reduction mechanism of NO on Pd, especially the route of N−N bond formation, remains unclear, impeding the development of new, improved catalysts. We report here the elementary reaction steps in the reaction pathway of reducing NO to NH3, N2O, and N2, based on density functional theory (DFT)-based quantum mechanics calculations. We show that the formation of N2O proceeds through an Eley-Rideal (E−R) reaction pathway that couples one adsorbed NO* with one non−adsorbed NO from the solvent or gas phase. This reaction requires high NO* surface coverage, leading first to the formation of the trans-(NO)2* intermediate with a low N−N coupling barrier (0.58 eV). Notably, trans-(NO)2* will continue to react with NO in the solvent to form N2O, that has not been reported. With the consumption of NO and the formation of N2O* in the solvent, the Langmuir-Hinshelwood (L-H) mechanism will dominate at this time, and N2O* will be reduced by hydrogenation at a low chemical barrier (0.42 eV) to form N2. In contrast, NH3 is completely formed by the L-H reaction, which has a higher chemical barrier (0.87 eV). Our predicted E-R reaction has not previously been reported, but it explains some existing experimental observations. In addition, we examine how catalyst activity might be improved by doping a single metal atom (M) at the NO* adsorption site to form M/Pd and show its influence on the barrier for forming the N−N bond to provide control over the product distribution.

Physics↗
DOE OSTI2021

Disorder and Itinerant Magnetism in Full Heusler Pd 2 TiIn

We report electronic and magnetic properties of full Heusler Pd 2 TiIn based on first principles calculations. This compound has been variously characterized as magnetic or non-magnetic. We use first principles calculations with accurate methods to reexamine this issue. We find that ideal ordered Heusler Pd 2 TiIn remains non-magnetic, in accord with prior work. Furthermore, we do find that it is possible to explain the magnetism seen in experiments through disorder and in particular we find that site disorder can lead to moment formation in this compound. In addition, we find an alternative low energy cubic crystal structure, which will be of interest to explore experimentally.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Layer-by-layer assembly of a [Fe-(pyrazine){Pd(CN) 4 }] spin crossover thin film

Abstract [Fe-(pyrazine){Pd(CN) 4 }] (pyrazine = pz) thin films were fabricated using a layer-by-layer assembly approach, a method known to be tunable, versatile, and scalable, since thin films are better-suited for industrial applications. In this study, [Fe-(pz){Pd(CN) 4 }] powder was synthesized, and the results obtained from a vibrating sample magnetometer verified the presence of an abrupt hysteresis loop with widths of 45 K centered around 300 K, indicating good cooperativity. Super conducting quantum interference device magnetometry results indicated a slow spin transition with temperature but with evidence of hysteresis for thin film samples. X-ray absorption analysis provided further support of the spin crossover behavior but differs from the magnetometry because the spin state transition at the surface differs from the bulk of the thin film. X-ray photoelectron spectroscopy provided some insight into issues with the film deposition process and multiplex fitting was used to further support the claim that the surface of the film is different than the bulk of the film.

McElveen, Kayleigh A. (ORCID:0000000210302913)↗
DOE OSTI2026

Evolution of charge density wave soft phonon modes in Pd 𝑥 ⁢ErTe 3

Here, we investigated the lattice dynamics of quasi-two-dimensional Pd-intercalated ErTe 3 in relation to its charge-density-wave (CDW) transitions by means of x-ray diffuse and meV-resolution inelastic x-ray scattering. In pristine ErTe 3 , CDW order develops at orthogonal in-plane wave vectors q$^𝑐_1$ =(0,0,0.29) (the 𝑐−CDW ) and q$^𝑎_2 $= (0.31,0,0) (the 𝑎−CDW ), with transition temperatures $𝑇^𝑐_1$ = 270K and $𝑇^𝑎_2$ = 160K, respectively. Remarkably, we observe diffuse x-ray scattering already near the higher transition temperature $𝑇^𝑐_1$ along 𝑎−CDW but at a slightly different wave vector q$^𝑎_1$ = (0.29,0,0). Inelastic x-ray scattering for Pd 0.01 ⁢ErTe 3 shows that a partial phonon softening at q$^𝑎_1$, underscoring the strong competition between ordering tendencies along the nearly equivalent in-plane axes of the orthorhombic lattice. For intercalation levels 𝑥 ≥ 0.02, the 𝑎−CDW state is suppressed. Nevertheless, a similar correlation between phonon softening and diffuse scattering persists along the [100] direction, again observed at q$^𝑎_1$ = (0.29,0,0) and $𝑇^𝑐_1$. These findings suggest that the 𝑎−CDW is fully suppressed for 𝑥 ≥ 0.02, and that the residual diffuse scattering at originates from the partial phonon softening associated with the 𝑐−CDW, reflected by the near equality of the absolute size of q$^𝑐_1$ and q$^𝑎_1$.

Maity, Avishek [Technische Univ. München, Garching↗
DOE OSTI2020

Fermi surface topology and nontrivial Berry phase in the flat-band semimetal Pd 3 Pb

A study of the Fermi surface of the putative topological semimetal Pd 3 Pb has been carried out using Shubnikov–de Haas (SdH) oscillations measured in fields of up to 60 T. Pd 3 Pb has garnered attention in the community due to a peculiar Fermi surface that has been proposed theoretically by Ahn, Pickett, and Lee, Phys. Rev. B 98 , 035130 (2018) to host a dispersionless band along X - Γ as well as multiple triply degenerate band crossings that, under the influence of spin-orbit coupling, lead to ten fourfold degenerate Dirac points. Analysis of the SdH oscillation data verifies the calculated multisheet Fermi surface, revealing a Γ centered spheroid that had not been resolved experimentally in prior studies. A comprehensive, angle-dependent analysis of the phase of the SdH oscillations convincingly demonstrates a nontrivial Berry phase for two bands along Γ - R , supporting the theoretical predictions, while simultaneously evidencing interference between extremal orbits that mimics a trivial Berry phase at intermediate angles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Structure of the low-lying states in 99,101,103,105 Pd

In this work, the odd-mass 99-105 Pd nuclei were studied via 90-96 Zr( 12,13 C, xnγ) fusion/evaporation reactions. The beam was provided by the IFIN-HH Tandem accelerator at energies of approximately 50 MeV. Emitted gamma rays were detected by the hybrid multidetector system RoSphere. The structure of the low-lying excited states in 99-105 Pd and their gamma-decay pattern are discussed in the framework of the rigid triaxial rotor plus particle model, providing a reasonable description of the low-lying level energies, electromagnetic transition rates, and magnetic moments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Investigating the effects of precise mass measurements of Ru and Pd isotopes on machine learning mass modeling

Atomic masses are a foundational quantity in our understanding of nuclear structure, astrophysics, and fundamental symmetries. The longstanding goal of creating a predictive global model for the binding energy of a nucleus remains a significant challenge, however, and prompts the need for precise measurements of atomic masses to serve as anchor points for model developments. We present precise mass measurements of neutron-rich Ru and Pd isotopes performed at the Californium Rare Isotope Breeder Upgrade facility at Argonne National Laboratory using the Canadian Penning Trap mass spectrometer. The masses of 108 Ru, 110 Ru, and 116 Pd were measured to a relative mass precision $\delta$⁢$m/m$ ≈ 10 -8 via the phase-imaging ion-cyclotron-resonance technique, and represent an improvement of approximately an order of magnitude over previous measurements. Further, these mass data were used in conjunction with the physically interpretable machine learning (PIML) model, which uses a mixture density neural network to model mass excesses via a mixture of Gaussian distributions. The effects of our new mass data on a Bayesian-updating of a PIML model are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Robust superconductivity intertwined with charge density wave and disorder in Pd-intercalated ErTe 3

Pd-intercalated ErTe 3 is studied as a model system to explore the effect of "intertwined" superconducting and charge density wave (CDW) orders. Despite the common wisdom that superconductivity emerges only when CDW is suppressed, we present data from STM and AC susceptibility measurements that show no direct competition between CDW order and superconductivity. Both coexist over most of the intercalation range, with uniform superconductivity over length scales that exceed the superconducting coherence length. This is despite persisting short-range CDW order and increased scattering from the Pd intercalation. While superconductivity is insensitive to local defects in either of the bi-directional CDWs, vestiges of the Fermi-level distortions are observed in the properties of the superconducting state.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Spontaneous Gap Opening and Potential Excitonic States in an Ideal Dirac Semimetal Ta 2 Pd 3 Te 5

The opening of an energy gap in the electronic structure generally indicates the presence of interactions. In materials with low carrier density and short screening length, long-range Coulomb interaction favors the spontaneous formation of electron-hole pairs, so called excitons, opening an excitonic gap at the Fermi level. Excitonic materials host unique phenomena associated with pair excitations. However, there is still no generally recognized single-crystal material with excitonic order, which is, therefore, awaited in condensed matter physics. Here, we show that excitonic states may exist in the quasi-one-dimensional material Ta 2 Pd 3 Te 5 , which has an almost ideal Dirac-like band structure, with the Dirac point located exactly at the Fermi level. We find that an energy gap appears at 350 K, and it grows with decreasing temperature. The spontaneous gap opening is absent in a similar material Ta 2 Ni 3 Te 5 . Intriguingly, the gap is destroyed by the potassium deposition on the crystal, likely due to extra-doped carriers. Furthermore, we observe a pair of in-gap flat bands, which is an analog of the impurity states in a superconducting gap. All these observations can be properly explained by an excitonic order, providing Ta 2 Pd 3 Te 5 as a new and promising candidate realizing excitonic states. Published by the American Physical Society 2024

Zhang, Peng (ORCID:0000000225634670)↗
DOE OSTI2025

Nontrivial critical behavior at magnetic transitions: A case study of Sm 7 ⁢Pd 3

We present a comprehensive analysis of the critical behavior of Sm 7 ⁢Pd 3 in the vicinity of its second-order magnetoelastic transition at 𝑇 c =173 K. The critical exponents (CEs) 𝛽 and 𝛾, determined using both the standard convergence procedure and the average normalized slope (ANS) method, diverge at 𝑇 c –-a characteristic typically associated with first-order transitions. Notably, none of the established universality classes satisfactorily describe the critical behavior of Sm 7 ⁢Pd 3 , and we discuss the possible origins of this deviation in the context of the strong spin-lattice coupling intrinsic to the sample. We emphasize the importance of accurately selecting the critical temperature and magnetic field ranges to ensure robust critical behavior analysis, and propose a quantitative approach to assess the reliability of the extracted CEs. Additionally, we demonstrate that in the ANS method, the critical exponents 𝛽 and 𝛾 should be calculated separately using data for 𝑇 ⩽ 𝑇 c and 𝑇 ⩾ 𝑇 c , respectively. In conclusion, our findings underscore the need for a revised theoretical framework to accurately describe second-order magnetoelastic transitions.

Ferrimagnets↗
DOE OSTI2022

P&PD Explorer

The P&PD Explorer is an interactive, spreadsheet-based tool for examining the data tables in the Planning and Production Directive (P&PD).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Product selectivity and mass transport in levulinic acid transfer hydrogenation by monolithic MIL-100, MIL-88B and ZIF-8@Pd MOFs

The diffusion processes between adsorbent and adsorbate naturally play a significant role in the efficiency and selectivity of the heterogenous catalytic process. This paper considers the importance of diffusion processes in the transfer hydrogenation reaction of levulinic acid to γ-valerolactone by MIL-88B, MIL-100, and ZIF8@Pd monolithic catalysts. Over a period of five catalytic cycles, it was shown that the Fe-based catalysts can achieve similar conversions to the ZIF-8 supported Pd, with the only current limitation being the lower aqueous stability of these MOFs. Diffusion constants were calculated using the ZLC method, with micropore diffusion limitation found for ZIF-8 and MIL-100 monolithic frameworks at 2.7 x 10 -8 and 4.6 x 10 -8 cm 2 s -1 respectively. This diffusion limitation was also confirmed by IR spectroscopy with an increasing concentration of C—H bands on the MOF substrate post-reaction. Mass transfer coefficients, also calculated by ZLC, revealed increased mass transport for the hydrophobic ZIF-8 framework, which perhaps aids in the γ-valerolactone selectivity over side products that are produced in the absence of catalytic material, as seen for MIL-88B and MIL-100 after multiple uses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Increasing Al-Pair Abundance in SSZ-13 Zeolite via Zeolite Synthesis in the Presence of Alkaline Earth Metal Hydroxide Produces Hydrothermally Stable Co-, Cu- and Pd-SSZ-13 Materials

Replacing alkaline for alkaline-earth metal hydroxide in the synthesis gel during the synthesis of siliceous SSZ-13 zeolite (Si/Al~10) yields SSZ-13 with novel, advantageous properties. Its NH 4 -form ion-exchanges higher amount of isolated divalent M(II) ions than the conventional one: this is the consequence of an increased number of Al pairs in the structure induced by the +2 charge of Sr(II) cations in the synthesis gel that force two charge-compensating AlO 4 – motives to reside closer together. We characterize the +2 state of Co(II) ions in these materials with infra-red spectroscopy and X-ray absorption spectroscopy measurements and show their utility for NOx pollutant adsorption from ambient air: the ones derived from SSZ-13 with higher Al pair content contain more isolated cobalt(II) and, thus, perform better as ambient-air NOx adsorbers. Notably, Co(II)/SSZ-13 with an increased number of Al pairs is significantly more hydrothermally stable than its NaOH-derived analogue. Loading Pd(II) into Co-SSZ-13(Sr) produces an active NOx adsorber (PNA) material that can be used for NOx adsorption from simulated diesel engine exhaust. The critical issue for these applications is hydrothermal stability of Pd-zeolites. Pd/SSZ-13 synthesized in the presence of Sr(OH) 2 does not lose its PNA capacity after extremely harsh aging at 850 and 900 °C (10 h in 10% H 2 O/air flow) and loses only ~55% capacity after hydrothermal aging at 930 °C. This can be extended to other divalent metals for catalytic applications, such as copper: we show that Cu/SSZ-13 catalyst can survive hydrothermal aging at 920 °C without losing its catalytic properties, metal dispersion and crystalline structure. Thus, we provide a new, simple, and scalable strategy for making remarkably (hydro)thermally stable metal-zeolite materials/catalysts with a number of useful applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tailoring the Spin Reorientation Transition of Co Films by Pd Monolayer Capping

We have characterized the magnetization easy-axis of ultra-thin Co films (2–5 atomic layers, AL) grown on Ru(0001) when they are capped with a monolayer of Pd. The addition of a Pd monolayer turns the magnetization of 3 and 4 AL-thick Co films from an in-plane to an out-of-plane alignment, but not that of a 5 AL-thick film. These observations are explained in terms of an enhancement of the surface anisotropy. The exposure of the sample to hydrogen, CO or a combination of both gases does not overcome this effect.

Chemistry↗
DOE OSTI2020

Materials Data on Pd(Se3Br)2 by Materials Project

PdSe6(Br)2 crystallizes in the triclinic P-1 space group. The structure is one-dimensional and consists of two hydrobromic acid molecules and one PdSe6 ribbon oriented in the (0, -1, 1) direction. In the PdSe6 ribbon, Pd2+ is bonded in a linear geometry to two equivalent Se2- atoms. Both Pd–Se bond lengths are 2.44 Å. There are three inequivalent Se2- sites. In the first Se2- site, Se2- is bonded in a distorted water-like geometry to two Se2- atoms. There are one shorter (2.35 Å) and one longer (2.43 Å) Se–Se bond lengths. In the second Se2- site, Se2- is bonded in a 1-coordinate geometry to one Pd2+ and two Se2- atoms. The Se–Se bond length is 2.43 Å. In the third Se2- site, Se2- is bonded in a distorted L-shaped geometry to two Se2- atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Pd(NCl3)2 by Materials Project

PdCl6N2 is Fluorite structured and crystallizes in the cubic Fm-3m space group. The structure is zero-dimensional and consists of eight ammonia molecules and four PdCl6 clusters. In each PdCl6 cluster, Pd4+ is bonded in an octahedral geometry to six equivalent Cl1- atoms. All Pd–Cl bond lengths are 2.32 Å. Cl1- is bonded in a single-bond geometry to one Pd4+ atom.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Pd(Br3N)2 by Materials Project

PdBr6N2 is Fluorite structured and crystallizes in the cubic Fm-3m space group. The structure is zero-dimensional and consists of eight ammonia molecules and four PdBr6 clusters. In each PdBr6 cluster, Pd4+ is bonded in an octahedral geometry to six equivalent Br1- atoms. All Pd–Br bond lengths are 2.47 Å. Br1- is bonded in a single-bond geometry to one Pd4+ atom.

36 MATERIALS SCIENCE↗