SEARCH · Engineering Papers

Results for “Partitioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

DOE OSTI2019

Effects of Nozzle Radial Position, Separation Angle, and Gas Flow Partitioning on the Mixing, Eye Area, and Wall Shear Stress in Ladles Fitted with Dual Plugs

Mixing time, slag eye area, and wall shear stress in a ladle fitted with dual plugs have been studied as a function of operating variables, namely, gas flow rate, radial nozzle position, separation angle between nozzles and flow rate partitioning. While the mixing time and slag eye area have been experimentally investigated in a scaled water model (with and without a top slag layer), the shear stress on the vessel wall has been studied computationally via a RANS-based turbulent, three-dimensional coupled Eulerian–Lagrangian (VOF-DPM), multiphase flow model. Experimental and computational results have indicated that the mixing, eye area, and wall shear stress depend on the gas flow rate, i.e., while mixing efficiency increases with the increasing gas flow rate, the slag eye area, and wall shear stress, in contrast, become more pronounced with the increasing gas flow, leading to an undesirable operating regime. The radial nozzle position, separation angle between the nozzles and flow rate partitioning at any given flow rate also influence the ladle process performance, influencing the mixing, eye area, and wall shear stress, albeit to a varied degree. Within the range of operating conditions studied, an expected inverse correspondence between mixing time and shear behavior was observed. Experimental and computational results in conjunction have indicated that the best arrangement of porous plugs or gas injection nozzles for superior ladle process performance is dependent on the gas flow rate and is specific to the desired objective (i.e., decreasing the mixing time, or slag eye area and wall shear stress). Hence, a unique gas injection practice cannot and should not be suggested as the optimum for ladle metallurgy in steelmaking. Nevertheless, if the mixing time is the parameter of primary interest, a nozzle configuration with equal flow partitioning (1:1) between the nozzles and identical nozzle radial positions (0.7R/0.7R, 45 deg) should suffice for both low and high gas flow rates. In contrast, a nonidentical nozzle radial position (0.7R/0.5R, 90 deg) and an unequal gas flow rate per nozzle (1:3) appear preferable if both ladle eye and shear stresses, rather than mixing, are the issues of concern.

36 MATERIALS SCIENCE↗

DOE OSTI2018

A general asymptotic formula for distinct partitions

Many asymptotic formulas exist for unrestricted integer partitions as well as for equal partitions of integers into a finite number of parts. We use an analogy with fermion gases and the tools of statistical physics to derive asymptotic formulas for distinct partitions with a large but finite number of parts. These results are supported by the fact that we recover some other existing asymptotic results and by numerical comparisons with exact results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Dynamic flux surrogate-based partitioned methods for interface problems

Loosely coupled partitioned methods for multiphysics problems treat each subproblem as a separate entity and advance them independently in time. In so doing these methods enable code reuse, increase concurrency and provide a convenient framework for plug-and-play multiphysics simulations. However, mathematically loosely coupled schemes are equivalent to a single step of an iterative solution method, which can compromise their accuracy and stability. We present a new data-driven partitioned method for coupled parametric PDEs that can improve upon the accuracy of traditional loosely coupled methods without incurring a performance penalty. To that end, we replace conventional field transfers across the interface by a surrogate for the dynamics of the interface flux exchanged between the subdomains. To develop this surrogate we apply dynamic mode decomposition to a non-standard staggered-in-time state, comprising the interface flux and small solution patches near the interface. The new approach shifts the main computational burden to an offline training phase, whereas application of the surrogate in the online phase amounts to a single matrix–vector multiplication. In conclusion, we provide stability analysis of the surrogate-based partitioned scheme and include numerical results that demonstrate its potential.

Dynamic mode decomposition (DMD)↗

DOE OSTI2021

Substrate Partitioning into Protein Macromolecular Frameworks for Enhanced Catalytic Turnover

Spatial partitioning of chemical processes is an important attribute of many biological systems, the effect of which is reflected in the high efficiency of enzymes found within otherwise chaotic cellular environments. Barriers, often provided through the formation of compartments or phase segregation, gate the access of macromolecules and small molecules within the cell and provide an added level of metabolic control. Taking inspiration from nature, we have designed virus-like particles (VLPs) as nanoreactor compartments that sequester enzyme catalysts and have used these as building blocks to construct 3D protein macromolecular framework (PMF) materials, which are structurally characterized using small-angle X-ray scattering (SAXS). Additionally, the highly charged PMFs form a separate phase in suspension, and by tuning the ionic strength, we show positively charged molecules preferentially partition into the PMF, while negatively charged molecules are excluded. This molecular partitioning was exploited to tune the catalytic activity of enzymes enclosed within the individual particles in the PMF, the results of which showed that positively charged substrates had turnover rates that were 8500× faster than their negatively charged counterparts. Moreover, the catalytic PMF led to cooperative behavior resulting in charge dependent trends opposite to those observed with individual P22 nanoreactor particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2017

Selective Partitioning of Ruthenium from Nitric Acid Media

Ruthenium removal from PUREX raffinate solutions is imperative for the application of some advanced actinide partitioning technologies, particularly partitioning of hexavalent americium. Ruthenium interferes with the oxidation of americium and suppresses its extraction. Selective extraction of ruthenium from these solutions is complicated by the existence of multiple ruthenium species in nitric acid. In this work, ruthenium is selectively extracted from nitric acid media through oxidation to ruthenium tetroxide and absorption into polymer beads. Extraction of ruthenium tetroxide into a variety of organic solvents is also explored. The use of UV-Visible spectroscopy to quantify extraction of ruthenium tetroxide was demonstrated. This method for extraction of ruthenium from nitric acid was applied to PUREX raffinate simulant solution and was found to simultaneously remove ruthenium (through oxidation and absorption) and zirconium (through precipitation). This method not only removes ruthenium and zirconium from solution but also separates ruthenium and zirconium from each other. Thus, the two most problematic fission product elements for the PUREX process are separated in a single step. Further, americium was not extracted or sorbed, which should allow it to be partitioned following ruthenium/zirconium removal using existing oxidative treatments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Daylength variation affects growth, photosynthesis, leaf metabolism, partitioning, and metabolic fluxes

Abstract Daylength, a seasonal and latitudinal variable, exerts a substantial impact on plant growth. However, the relationship between daylength and growth is nonproportional, suggesting the existence of adaptive mechanisms. Thus, our study aimed to comprehensively investigate the adaptive strategies employed by plants in response to daylength variation. We grew false flax (Camelina sativa) plants, a model oilseed crop, under long-day (LD) and short-day (SD) conditions and used growth measurements, gas exchange measurements, and isotopic labeling techniques, including 13C, 14C, and 2H2O, to determine responses to different daylengths. Our findings revealed that daylength influences various growth parameters, photosynthetic physiology, carbon partitioning, metabolic fluxes, and metabolite levels. SD plants employed diverse mechanisms to compensate for reduced CO2 fixation in the shorter photoperiod. These mechanisms included enhanced photosynthetic rates and reduced respiration in the light (RL), leading to increased shoot investment. Additionally, SD plants exhibited reduced rates of the glucose 6-phosphate (G6P) shunt and greater partitioning of sugars into starch, thereby sustaining carbon availability during the longer night. Isotopic labeling results further demonstrated substantial alterations in the partitioning of amino acids and TCA cycle intermediates between rapidly and slowly turning over pools. Overall, the results point to multiple developmental, physiological, and metabolic ways in which plants adapt to different daylengths to maintain growth.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Efficient Network Partitioning: Application for Decentralized State Estimation in Power Distribution Grids

Increase in the proliferation of distributed energy resources require real-time situational awareness for efficient grid operations. State estimation plays an important role for the real-time control and management of the power grid. As the sensing infrastructure grows, aggregating and handling high volumes of data at a centralized location is extremely difficult. To address this challenge, this paper first proposes a novel and efficient hier-archical spectral clustering-based network partitioning algorithm followed by a decentralized compressive sensing (DCS)-based state estimation. The applicability of the proposed network partitioning algorithm is tested on an IEEE 123-bus network, an IEEE 8,500-node system, and a 6,000+ node distribution network. The results shows that the proposed approach efficiently divides the network into multiple sub-networks with the minimum number of edge connections among the neighbors. Then, we perform DCS-based state estimation on the 6,000+ node distribution network after dividing the network into 18 optimal partitions. Simulation results show that the DCS-based state estimation recovers the system states with high accuracy and low complexity.

alternating direction method of multipliers↗

DOE OSTI2017

The Bohr–Kalckar correspondence principle and a new construction of partitions in number theory

The author attempts to change and supplement the standard scheme of partitions of integers in number theory to make it completely concur with the Bohr–Kalckar correspondence principle. In order to make the analogy between the the atomic nucleus and the theory of partitions of natural numbers more complete, to the notion of defect of mass author assigns the “defect” ({a})-bar = [a + 1] − a of any real number a (i.e., the fractional value that must be added to a in order to obtain the nearest larger integer). This allows to carry over the Einstein relation between mass and energy to a relation between the whole numbers M and N, where N is the number of summands in the partition ofM into positive summands, as well as to define the forbidding factor for the number M, and apply this to the Bohr–Kalckar model of heavy atomic nuclei and to the calculation of the maximal number of nucleons in the nucleus.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2018

Effect of a density dependent partition function on the EOS properties of neutral nitrogen and the doubly-ionized argon plasma

There have been many attempts to improve upon the calculation of the thermodynamic properties of plasmas. These properties are dependent on the form of the partition function, and so a study of these properties without a discussion of the partition function would be incomplete. Many previous authors have shown reasonable concern over the electronic contribution to the partition function, since it is well known that the series expression diverges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Efficient Network Partitioning: Application for Decentralized State Estimation in Power Distribution Grids: Preprint

Increase in the proliferation of DERs requires real-time situational awareness for efficient grid operations. State estimation plays an important role for real time control and management of the power grid. As the sensing infrastructure grows, aggregating and handling high volumes of data at a centralized location is extremely difficult. To address this challenge, this paper first proposes a novel and efficient hierarchical spectral clustering-based network partition algorithm followed by a decentralized compressive sensing (DCS) based state estimation. The applicability of the proposed network partitioning algorithm is tested on IEEE-123 bus, IEEE-8500 node, and a 6204-node distribution network. The results shows that the proposed approach efficiently divides the network into multiple sub-networks with the minimum edge connections among the neighbors. Then, we perform DCS-based state estimation on the 6204-node distribution network after dividing the network into 18 optimal partitions. Simulation results show that DCS-based state estimation recovers the system states with high accuracy and low complexity.

ADMM↗

DOE OSTI2016

Fire compartment partitioning approaches for fire probabilistic safety analysis of a high-temperature gas-cooled reactor - 18545

Fire compartment partitioning is the foundational task in Fire Probabilistic Safety Analysis (FPSA), that requires approaches able to balance analytical accuracy and computational burden. In this work, two fire compartment partitioning approaches are illustrated and applied to an electric building of a High-Temperature Gas-Cooled Reactor (HTGR, e.g., HTR-PM), and the quantified risks of the compartments obtained with the two approaches are compared. The results show that risk is insensitive to the utilized fire compartment partitioning approach, making the FPSA tasks easier to be performed. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2018

Source Partitioning of Methane Emissions and its Seasonality in the U.S. Midwest

Abstract The methane (CH 4 ) budget and its source partitioning are poorly constrained in the Midwestern United States. We used tall tower (185 m) aerodynamic flux measurements and atmospheric scale factor Bayesian inversions to constrain the monthly budget and to partition the total budget into natural (e.g., wetlands) and anthropogenic (e.g., livestock, waste, and natural gas) sources for the period June 2016 to September 2017. Aerodynamic flux observations indicated that the landscape was a CH 4 source with a mean annual CH 4 flux of +13.7 ± 0.34 nmol m −2 s −1 and was rarely a net sink. The scale factor Bayesian inversion analyses revealed a mean annual source of +12.3 ± 2.1 nmol m −2 s −1 . Flux partitioning revealed that the anthropogenic source (7.8 ± 1.6 Tg CH 4 yr −1 ) was 1.5 times greater than the bottom‐up gridded United States Environmental Protection Agency inventory, in which livestock and oil/gas sources were underestimated by 1.8‐fold and 1.3‐fold, respectively. Wetland emissions (4.0 ± 1.2 Tg CH 4 yr −1 ) were the second largest source, accounting for 34% of the total budget. The temporal variability of total CH 4 emissions was dominated by wetlands with peak emissions occurring in August. In contrast, emissions from oil/gas and other anthropogenic sources showed relatively weak seasonality.

Chen, Zichong↗

DOE OSTI2019

A Tale of Two Trimers from Two Different Worlds: A COF‐Inspired Synthetic Strategy for Pore‐Space Partitioning of MOFs

Abstract The introduction of a symmetry‐ and size‐matching pore‐partitioning agent in the form of either a molecular ligand, such as 2,4,6‐tri(4‐pyridinyl)‐1,3,5‐triazine ( tpt ), or a metal‐complex cluster, into the hexagonal channels of MIL‐88/MOF‐235‐type (the acs net) to create pacs ‐type (partitioned acs ) crystalline porous materials is an effective strategy to develop high‐performance gas adsorbents. We have developed an integrated COF–MOF coassembly strategy as a new method for pore‐space partitioning through the coassembly of [(M 3 (OH) 1− x (O) x (COO) 6 ] MOF‐type and [B 3 O 3 (py) 3 ] COF‐type trimers. With this strategy, the coordination‐driven assembly of the acs framework occurred concurrently and synergistically with the COF‐1‐type condensation of pyridine‐4‐boronic acid into a C 3 ‐symmetric trimeric boroxine molecule. The resulting boroxine‐based pacs materials exhibited dramatically enhanced gas‐sorption properties as compared to nonpartitioned acs ‐type materials and are among the most efficient NH 3 ‐sorption materials.

Wang, Yanxiang↗

DOE OSTI2022

Simultaneous Control of Pore‐Space Partition and Charge Distribution in Multi‐Modular Metal–Organic Frameworks

Abstract We report here a strategy for making anionic pacs type porous materials by combining pore space partition with charge reallocation. The method uses the first negatively charged pore partition ligand (2,5,8‐tri‐(4‐pyridyl)‐1,3,4,6,7,9‐hexaazaphenalene, H‐tph) that simultaneously enables pore partition and charge reallocation. Over two dozen anionic pacs materials have been made to demonstrate their excellent chemical stability and a high degree of tunability. Notably, Ni 3 ‐bdt‐tph (bdt=1,4‐benzeneditetrazolate) exhibits month‐long water stability, while CoV‐bdt‐tph sets a new benchmark for C 2 H 2 storage capacity under ambient conditions for ionic MOFs. In addition to tunable in‐framework modules, we show feasibility to tune the type and concentration of extra‐framework counter cations and their influence on both stability and capability to separate industrial C 3 H 8 /C 3 H 6 and C 6 H 6 /C 6 H 12 mixtures.

Hong, Anh N.↗

DOE OSTI2022

Simultaneous Control of Pore-Space Partition and Charge Distribution in Multi-Modular Metal–Organic Frameworks

Here we report here a strategy for making anionic pacs type porous materials by combining pore space partition with charge reallocation. The method uses the first negatively charged pore partition ligand (2,5,8-tri-(4-pyridyl)-1,3,4,6,7,9-hexaazaphenalene, H-tph) that simultaneously enables pore partition and charge reallocation. Over two dozen anionic pacs materials have been made to demonstrate their excellent chemical stability and a high degree of tunability. Notably, Ni 3 -bdt-tph (bdt=1,4-benzeneditetrazolate) exhibits month-long water stability, while CoV-bdt-tph sets a new benchmark for C 2 H 2 storage capacity under ambient conditions for ionic MOFs. In addition to tunable in-framework modules, we show feasibility to tune the type and concentration of extra-framework counter cations and their influence on both stability and capability to separate industrial C 3 H 8 /C 3 H 6 and C 6 H 6 /C 6 H 12 mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Concurrent Enhancement of Acetylene Uptake Capacity and Selectivity by Progressive Core Expansion and Extra–Framework Anions in Pore–Space–Partitioned Metal–Organic Frameworks

A multi-stage core-expansion method is proposed here as one component of the integrative binding-site/extender/core-expansion (BEC) strategy. The conceptual deconstruction of the partitioning ligand into three editable parts draws our focus onto progressive core expansion and allows the optimization of both acetylene uptake and selectivity. Herein the effectiveness of this strategy is shown through a family of eight cationic pore-partitioned materials containing three different partitioning ligands and various counter anions. The optimized structure, Co 3 -cpt-tph-Cl (Hcpt=4-(p-carboxyphenyl)-1,2,4-triazole, H-tph=(2,5,8-tri-(4-pyridyl)-1,3,4,6,7,9-hexaazaphenalene) with the largest surface area and highest C 2 H 2 uptake capacity (200 cm 3 /g at 298 K), also exhibits (desirably) the lowest CO 2 uptake and hence the highest C 2 H 2 /CO 2 selectivity. The successful boost in both C 2 H 2 capacity and IAST selectivity allows Co 3 -cpt-tph-Cl to rank among the best crystalline porous materials, ionic MOFs in particular, for C 2 H 2 uptake and C 2 H 2 /CO 2 experimental breakthrough separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

Using multiple data sources to investigate foraging niche partitioning in sympatric obligate avian scavengers

As carrion feeders competing for a limited and ephemeral resource, avian scavengers are ideal model organisms to study mechanisms of niche partitioning. Previous work has focused on observations of species’ interactions at carcasses, and although fruitful, the inclusion of behavior beyond that at carcasses, such as movement patterns, could yield a more comprehensive understanding of mechanisms of foraging niche partitioning. Our goal was to assess how differences in physiological, morphological, and social characteristics between sympatric black vultures ( Coragyps atratus ) and turkey vultures ( Cathartes aura ) manifest interspecific variation in movement patterns, foraging habitats, and carcass use to reduce direct competition. Both species are obligate scavengers that co-occur across much of the New World. Turkey vultures are solitary foragers with enhanced olfactory capabilities and wings optimized for energy-efficient low-altitude soaring. Black vultures are aggressive, heavier bodied, and forage socially. We assessed interspecific variation in carcass exploitation using experimental carcass trials encompassing a range of habitats, carcass sizes, and seasons, and used GPS telemetry to compare how soaring conditions influenced daily space use and diurnal patterns of movement activity for each species. Turkey vultures occurred more often at small (i.e., rabbit) carcasses, and those obscured by forest cover than black vultures, and were the first vultures recorded at 94% of carcasses visited by both species. Both species increased movement rates and daily ranges when soaring conditions were favorable; however, turkey vultures had higher travel rates regardless of soaring conditions. Our results suggest the olfactory sense of turkey vultures allows them to locate smaller and visually obscured carcasses more efficiently than black vultures, facilitated by wing morphology that allows them to forage over large areas efficiently. Socially foraging black vultures appear specialized at locating larger carcasses in open habitats, which does not require as much foraging flight as turkey vultures. Our study illustrates how inclusion of movement ecology into niche partitioning studies provides a more complete understanding of the mechanisms of coexistence in avian scavenger guilds. This approach may provide important information to guide conservation efforts, such as supplemental feeding, of imperiled vulture species.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

$$ T\overline{T},J\overline{T},T\overline{J} $$ partition sums from string theory

We calculate the torus partition sum of a general CFT 2 with left and right moving conserved currents J and $ \overline{J} $ J ¯ , perturbed by a combination of the irrelevant operators $ T\overline{T},J\overline{T} $ T T ¯ , J T ¯ and $ T\overline{J} $ T J ¯ . We use string theory techniques to write it as an integral transform of the partition sum of the unperturbed CFT with chemical potentials for the left and right moving conserved charges. The resulting expression transforms in the right way under the modular group, and reproduces the known spectrum of these models. We also derive a formula for the partition function of deformed CFT 2 with non-vanishing chemical potentials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗