Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROJECTILE CRATERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

227 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Risk Assessment of Cassini Sun Sensor Integrity Due to Hypervelocity Impact of Saturn Dust Particles

A sophisticated interplanetary spacecraft, Cassini is one of the heaviest and most sophisticated interplanetary spacecraft humans have ever built and launched. Since achieving orbit at Saturn in 2004, Cassini has collected science data throughout its four-year prime mission (2004-08), and has since been approved for first and second extended missions through September 2017. In late 2016, the Cassini spacecraft will begin a daring set of ballistic orbits that will hop the rings and dive between the upper atmosphere of Saturn and its innermost D-ring twenty-two times. The "dusty" environment of the inner D-ring region the spacecraft must fly through is hazardous because of the possible damage that dust particles, travelling at speeds as high as 31.4 km/s, can do to spacecraft hardware. During hazardous proximal ring-plane crossings, the Cassini mission operation team plans to point the high-gain antenna to the RAM vector in order to protect most of spacecraft instruments from the incoming energetic ring dust particles. However, this particular spacecraft attitude will expose two Sun sensors (that are mounted on the antenna dish) to the incoming dust particles. High-velocity impacts on the Sun sensor cover glass might penetrate the 2.54-mm glass cover of the Sun sensor. Even without penetration damage, craters created by these impacts on the surface of the cover glass will degrade the transmissibility of light through it. Apart from being directly impacted by the dust particles, the Sun sensors are also threatened by some fraction of ricochet ejecta that are produced by dust particle impacts on the large antenna dish (made of graphite fiber epoxy composite material). Finally, the spacecraft attitude control system must cope with disturbances due to both the translational and angular impulses imparted on the large antenna dish and the long magnetometer boom by the incoming high-velocity projectiles. Analyses performed to quantify the risks the Sun sensors must contend with during these hazardous ring-plane crossings are given in this paper

Lee, Allan Y.↗
NASA NTRS2002

The Meteoritic Component in Impact Deposits

An important part of the history of impacts on Earth, and their influence on the terrestrial environment and biotic evolution, is the provenance of the impacting bolides. This will reflect the history of the large-body object flux in the inner solar system. The physical and chemical properties of projectiles, as well as their orbital evolution, has influenced the dynamics and the relative timing of impact events. Possible impact scenarios include random impacts by individual asteroids or comets, or clusters of impacts due to major collisions in the asteroid or Kuiper belts, or large perturbations of the Oort cloud of comets. Over the last several years, a combination of trace element, isotopic, and petrologic data have yielded significant insights into this impact history. The trace element chemistry of sediments, in particular the concentration of siderophiles (e.g., Ir), is a useful tool to detect impacts and provides supporting evidence for suspected impact deposits. However, siderophiles are not especially useful in distinguishing between types of projectiles. Interelement abundances of PGEs can distinguish a chondritic signature, but since most asteroids, and probably all comets are chondritic, these data do little to distinguish between chondritic source materials. Perhaps the most significant chemical argument used to constrain provenance, is that the total amount of Ir in the global Cretaceous-Tertiary (KT) boundary ejecta layer is considerably less than that expected by a low-velocity, 10 km asteroid impact and is most consistent with the impact of a high-velocity, low-Ir comet. Alternatively, much of the Ir may have been buried in the Chicxulub crater and/or ejected to escape velocity.

Kyte, Frank T.↗
NASA NTRS1987

Impact on the earth, ocean and atmosphere

On the basis of finite-difference techniques, cratering flow calculations are used to obtain the spatial attenuation of shock pressure with radius along the impact axis for the impact of silicate rock and iron impactors on a silicate half-space at speeds of 5 to 45 km/sec. Upon impact of a 10 to 30 km diameter silicate or water object onto a 5 km deep ocean overlying a silicate half-space planet at 30 km/sec, it is found that from 12 to 15 percent of the incident energy is coupled into the water. The mass of atmosphere lost due to impacts of 1 to 5 km radius projectiles is calculated.

Ahrens, Thomas J.↗
NASA NTRS1985

Why Not a Constant Early Lunar Impact Rate?

Two distinct episodes of impacting are recorded on the Moon's surface. An early episode marked by an intense barrage that included basin-forming projectiles ended about 3.8 aeons ago when the Orientale basin was created. The second episode, after 3.2 or 3.3 aeons ago, was marked by a much lower impact rate. These very different rates are separated by a short transition period during the Late Imbrian Epoch. It is found that a constant preImbrian impact rate is consistent with all the relevant observations and with the following lunar historical scenario: (1) crustal solidification between about 4.3 and 4.25 aeons ago; (2) formation of Procellarum, South Pole-Aitken, about 22 now-obliterated basins, and about 2,850 now-obliterated 30 to 300 km craters between 4.25 and 4.1 aeons ago; and (3) formation of 39 still-preserved basins, 1,200 still-perserved craters, and 2,200 now-obliterated craters between 4.1 and 3.85 aeons ago. At the constant rate, the amount of mass that impacted the Moon since crustal solidification would not greatly exceed the amount that has left a permanent visible record.

Wilhelms, D. E.↗
NASA NTRS2003

The Meteoritic Component in Impact Deposits

This proposal requested support for a broad-based research program designed to understand the chemical and mineralogical record of accretion of extraterrestrial matter to the Earth. The primary goal of this research is to study the accretion history of the Earth, to understand how this accretion history reflects the long-term flux of comets, asteroids, and dust in the inner solar system and how this flux is related to the geological and biological history of the Earth. This goal is approached by seeking out the most significant projects that can be attacked utilizing the expertise of the PI and potential collaborators. The greatest expertise of the PI is the analysis of meteoritic components in terrestrial sediments. This proposal identifies three primary areas of research, involving impact events in the early Archean (3.2 Ga), the late Eocene (35 Ma) and the late Pliocene (2 Ma). In the early Archean we investigate sediments that contain the oldest recorded impacts on Earth. These are thick spherule beds, three of which were deposited within 20 m.y. If these are impact deposits the flux of objects to Earth at this time was much greater than predicted by current models. Earlier work used Cr isotopes to prove that one of these contain extraterrestrial matter, from a projectile with Cr isotopes similar to CV chondrites. We planned to expand this work to other spherule beds and to search for additional evidence of other impact events. With samples from D. Lowe (Stanford Univ.) the PI proposed to screen samples for high Ir and Cr so that appropriate samples can be provided to A. Shukolyukov for Cr-isotopic analyses. This work was expected to provide evidence that at least one interval in the early Archean was a period of intense bombardment and to characterize the composition of objects accreted. The late Eocene is also a period of intense bombardment with multiple spherule deposits and two large craters. Farley et al. (1998) demonstrated an increased (3)He flux to marine sediments that was attributed to an increase in interplanetary dust due to a shower of comets invading the inner solar system. We planned to detect a change in the Cr-isotopic composition in the flux of fine-grained extraterrestrial matter to ocean sediments. This would provide evidence for the comet shower hypothesis. We planned attempt to locate late Eocene impact deposits in a new high resolution, hi-latitude site that had the potential for excellent preservation and new information of the sources and effects of these impacts. Although most impacts on Earth occur in deep-ocean basins, only one such event is known - the late Pliocene impact of the Eltanin asteroid. The ejecta from this impact includes Ir- rich impact melt, spherules, and actual meteorites from the km-sized mesosiderite asteroid. Through a study of the ejecta, we can learn about the formation, distribution, alteration and preservation of Ir-rich deposits. We can also learn about meteorite survival during hypervelocity impacts and we can study pieces of a km-sized object to learn more about the mesosiderite parent body. Analyses of sediment cores and geophysical exploration of the impact site can further our understanding of the processes involved in deep-ocean impacts and potential effects on the terrestrial climate and biosphere. We planned analyses of this ejecta, a search for ejecta 5000 km distant from the impact area, and a new oceanographic expedition to study and sample the impact site. In addition to these three specific areas of research, the PI planned to remain flexible and available to exploit new opportunities presented by new discoveries, and to engage in new collaborations if other researchers require his expertise to develop new projects that fit within the objectives of the overall research program.

Kyte, Frank T.↗
NASA NTRS1998

Results of Two-Stage Light-Gas Gun Development Efforts and Hypervelocity Impact Tests of Advanced Thermal Protection Materials

Gun development efforts to increase the launching capabilities of the NASA Ames 0.5-inch two-stage light-gas gun have been investigated. A gun performance simulation code was used to guide initial parametric variations and hardware modifications, in order to increase the projectile impact velocity capability to 8 km/s, while maintaining acceptable levels of gun barrel erosion and gun component stresses. Concurrent with this facility development effort, a hypervelocity impact testing series in support of the X-33/RLV program was performed in collaboration with Rockwell International. Specifically, advanced thermal protection system materials were impacted with aluminum spheres to simulate impacts with on-orbit space debris. Materials tested included AETB-8, AETB-12, AETB-20, and SIRCA-25 tiles, tailorable advanced blanket insulation (TABI), and high temperature AFRSI (HTA). The ballistic limit for several Thermal Protection System (TPS) configurations was investigated to determine particle sizes which cause threshold TPS/structure penetration. Crater depth in tiles was measured as a function of impact particle size. The relationship between coating type and crater morphology was also explored. Data obtained during this test series was used to perform a preliminary analysis of the risks to a typical orbital vehicle from the meteoroid and space debris environment.

Cornelison, C. J.↗
NASA NTRS1979

Ries impact crater, southern Germany - Search for meteoritic material

Twenty-three samples covering a wide range of shock metamorphism from the Ries impact crater in southern Germany were analyzed for siderophile and volatile elements in order to determine the chemical nature of the impacting meteorite. Slight enrichments in the siderophile elements Ir and Os above the indigenous level of 0.015 ppb were observed in only eight samples, including a shocked, metal-bearing amphibolite and two weakly shocked biotite gneisses, whereas those samples expected to contain meteoritic material (heavily shocked glasses) do not exhibit a perceptible siderophile enrichment. The Ir, Os and Ni enrichments of the metal bearing amphibolite are found to be compatible with chondritic ratios, while in the other enriched samples, Ir, Ni and Se relationships suggest an achondritic meteoritic origin. An aubritic projectile is concluded to be most compatible with the data.

Morgan, J. W.↗
NASA NTRS1993

SPH modelling of energy partitioning during impacts on Venus

Impact cratering of the Venusian planetary surface by meteorites was investigated numerically using the Smoothed Particle Hydrodynamics (SPH) method. Venus presently has a dense atmosphere. Vigorous transfer of energy between impacting meteorites, the planetary surface, and the atmosphere is expected during impact events. The investigation concentrated on the effects of the atmosphere on energy partitioning and the flow of ejecta and gas. The SPH method is particularly suitable for studying complex motion, especially because of its ability to be extended to three dimensions. In our simulations, particles representing impactors and targets are initially set to a uniform density, and those of atmosphere are set to be in hydrostatic equilibrium. Target, impactor, and atmosphere are represented by 9800, 80, and 4200 particles, respectively. A Tillotson equation of state for granite is assumed for the target and impactor, and an ideal gas with constant specific heat ratio is used for the atmosphere. Two dimensional axisymmetric geometry was assumed and normal impacts of 10km diameter projectiles with velocities of 5, 10, 20, and 40 km/s, both with and without an atmosphere present were modeled.

Takata, T.↗
NASA NTRS1993

Determination of cosmic bodies size-velocity distribution by observation of current impacts on Mars

Collisions of cosmic bodies with terrestrial planets involve many physical processes such as deceleration and ablation during their flight through an atmosphere, the impact at a surface accompanied by cratering, melting and evaporation of surface material, generation of shock waves, etc. If body velocity is high enough then a thermal radiation is very important. All these processes on Mars proceed differently than on the other planets because of the low density of its atmosphere. In particular, this leads to the fact that smaller bodies of sizes of the order of 0.1-10 m strike the planet surface without being decelerated and perform some effects which may be detected by equipment placed on a board of artificial satellites, by a network of stations at the surface of Mars and even from the Earth. These observations can be used to determine size-velocity distribution of such bodies in the Solar System. Numerical simulation of the impacts at the surface of Mars have been carried out using two-dimensional gas dynamic code with detailed consideration of the thermal radiative transfer. This work is an extension of our previous paper. We have expanded a range of projectile sizes up to r sub 0 = 100 m. For such a large-scale body, the initial stage of the impact, involving crate ring and ejection of surface material, is very important. Thus, these effects have been taken into account.

Nemchinov, I. V.↗
NASA NTRS1994

The intact capture of hypervelocity dust particles using underdense foams

The impact of a hypervelocity projectile (greater than 3 km/s) is a process that subjects both the impactor and the impacted material to a large transient pressure distribution. The resultant stresses cause a large degree of fragmentation, melting, vaporization, and ionization (for normal densities). The pressure regime magnitude, however, is directly related to the density relationship between the projectile and target materials. As a consequence, a high-density impactor on a low-density target will experience the lowest level of damage. Historically, there have been three different approaches toward achieving the lowest possible target density. The first employs a projectile impinging on a foil or film of moderate density, but whose thickness is much less than the particle diameter. This results in the particle experiencing a pressure transient with both a short duration and a greatly reduced destructive effect. A succession of these films, spaced to allow nondestructive energy dissipation between impacts, will reduce the impactor's kinetic energy without allowing its internal energy to rise to the point where destruction of the projectile mass will occur. An added advantage to this method is that it yields the possibility of regions within the captured particle where a minimum of thermal modification has taken place. Polymer foams have been employed as the primary method of capturing particles with minimum degradation. The manufacture of extremely low bulk density materials is usually achieved by the introduction of voids into the material base. It must be noted, however, that a foam structure only has a true bulk density of the mixture at sizes much larger than the cell size, since for impact processes this is of paramount importance. The scale at which the bulk density must still be close to that of the mixture is approximately equal to the impactor. When this density criterion is met, shock pressures during impact are minimized, which in turn maximizes the probability of survival for the impacting particle. The primary objectives of the experiment are to (1) Examine the morphology of primary and secondary hypervelocity impact craters. Primary attention will be paid to craters caused by ejecta during hypervelocity impacts of different substrates. (2) Determine the size distribution of ejecta by means of witness plates and collect fragments of ejecta from craters by means of momentum-sensitive mcropore foam. (3) Assess the directionality of the flux by means of penetration-hole alignment of thin films placed above the cells. (4) Capture intact the particles that perforated the thin film and entered the cell. Capture media consisted of both previously flight-tested micropore foams and aerogel. The foams had different latent heats of fusion and, accordingly, will capture particles over a range of momenta. Aerogel was incorporated into the cells to determine the minimum diameter than can be captured intact.

Maag, Carl R.↗
NASA NTRS2018

Igneous Rocks Formed by Hypervelocity Impact

Igneous rocks are the primary building blocks of planetary crusts. Most igneous rocks originate via decompression melting and/or wet melting of protolith lithologies within planetary interiors and their classification and compositional, petrographic, and textural characteristics, arewell-studied. As our exploration of the Solar System continues, so too does the inventory of intrusive and extrusive igneous rocks, settings, and processes. The results of planetary exploration have also clearly demonstrated that impact cratering is a ubiquitous geological process that has affected, andwill continue to affect, all planetary objectswith a solid surface,whether that be rock or ice. It is nowrecognized that the production of igneous rocks is a fundamental outcome of hypervelocity impact. The goal of this review is to provide an up-to-date synthesis of our knowledge and understanding of igneous rocks formed by hypervelocity impact. Following a brief overview of the basics of the impact process, we describe howand whymelts are generated during impact events and howimpactmelting differs fromendogenic igneous processes.While the processmay differ,we showthat the products of hypervelocity impact can share close similarities with volcanic and shallow intrusive igneous rocks of endogenic origin. Such impact melt rocks, as they are termed, can display lobate margins and cooling cracks, columnar joints and at the hand specimen andmicroscopic scale, such rocks can displaymineral textures that are typical of volcanic rocks, such as quench crystallites, ophitic, porphyritic, aswell as features such as vesicles, flowtextures, and so on.Historically, these similarities led to themisidentification of some igneous rocks now known to be impact melt rocks as being of endogenic origin. This raises the question as to how to distinguish between an impact versus an endogenic origin for igneous-like rocks on other planetary bodies where fieldwork and sample analysis may not be possible and all that may be available is remote sensing data.While the interpretation of some impact melt rocks may be relatively straightforward (e.g., for clast-rich varieties and those with clear projectile contamination) we conclude that distinguishing between impact and endogenic igneous rocks is a non-trivial task that ultimately may require sample investigation and analysis to be conducted. Caution is, therefore, urged in the interpretation of igneous rocks on planetary surfaces.

Osinski, Gordon R.↗