Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE RANGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Phase transformation of boron nitride under hypothermal conditions

Phase transformation among different boron nitride (BN) phases in hydrothermal solution was investigated. It was found that hexagonal boron nitride (hBN) firstly formed in the solution at relatively low temperature (i.e., 220 deg. C). After that, a spot of hBN began to transform into wurtzite boron nitride (wBN) and cubic boron nitride (cBN) at 230 deg. C. More and more hBN converted into wBN and cBN with the increase in temperature, and this transformation process completed at 300 deg. C. In this paper, we have explained the mechanism of the above phase transformation by using a reported 'puckering mechanism'. - Graphical abstract: Phase transformations from hBN to wBN and cBN happened with the temperature increasing from 230 to 300 deg. C under hypothermal conditions, and nearly pure cBN has been synthesized at 300 deg. C and 12 MPa.

36 MATERIALS SCIENCE↗

Structure, magnetic and electrical properties of CeIrSb and its hydride CeIrSbH{sub 0.8}

The ternary antimonide CeIrSb absorbs hydrogen under moderate temperature and pressure conditions (4 MPa and 573 K), leading to the hydride CeIrSbH{sub 0.8}. The crystal structures of both compounds have been investigated by X-ray diffraction on powders and single crystals: TiNiSi type, space group Pnma, a=735.07(7), b=456.93(4), c=792.8(1) pm, R1/wR2=0.0206/0.0395, 601 F{sup 2} values for CeIrSb and a=728.16(14), b=460.35(6), c=825.87(2) pm, R1/wR2=0.0322/0.0735, 528 F{sup 2} values for CeIrSbH{sub 0.8} with 20 variables per refinement. Hydrogenation induces both an increase of the cell volume V (+4%) and a strongly anisotropic expansion of the unit cell with a maximum of 4.3% in the c direction, leading to a significant increase of the Ce-Ir and Ce-Ce distances in this direction. The H-insertion into CeIrSb leads to a magnetic transition from intermediate valence to antiferromagnetic behavior (T{sub N}=7.0 K) evidenced by magnetization, electrical resistivity and specific heat measurements. This transition can be explained on the basis of the Doniach diagram considering the J{sub cf} interaction between the 4f(Ce) and conduction electrons. - Graphical Abstract: Cerium coordination in CeIrSb and CeIrSbH{sub 0.8}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transport and mechanical property evaluation of (AgSbTe){sub 1-x}(GeTe){sub x} (x=0.80, 0.82, 0.85, 0.87, 0.90)

(AgSbTe{sub 2}){sub 1-x}(GeTe){sub x} (known collectively by the acronym of their constituent elements as TAGS-x, where x designates the mole fraction of GeTe) materials, despite being described over 40 years ago, have only recently been studied in greater detail from a fundamental standpoint. We have prepared a series of samples with composition (AgSbTe{sub 2}){sub 1-x}(GeTe){sub x} (x=0.80, 0.82, 0.85, 0.87 and 0.90). Cast ingots of the above compositions were ground and consolidated by spark plasma sintering (SPS). Sintering conditions, specifically high applied pressures of 65 MPa and slow heating rates, were identified as important variables that lead to samples with low porosity and good mechanical strength. The resulting ingots were cut for high temperature electrical, thermal transport and mechanical property evaluation. TAGS-85 was found to have the highest ZT of all samples investigated (ZT=1.36 at 700 K) as a result of its very low value of thermal conductivity. Hall effect measurements performed from 5 to 300 K found these materials to have complex multi-band transport characteristics. - Graphical Abstract: Powder X-ray diffraction of TAGS-x (x=0.80, 0.82, 0.85, 0.87 and 0.90) showing characteristic bifurcation indicative of rhombohedral structure.

36 MATERIALS SCIENCE↗

Solution combustion synthesis of calcium zirconate, CaZrO{sub 3}, powders

Single-phase CaZrO{sub 3} powder was prepared by heating at 300 deg. C an aqueous solution of Ca(NO{sub 3}){sub 2}, ZrO(NO{sub 3}){sub 2} and beta-C{sub 3}H{sub 7}NO{sub 2} (molar ratio=3:3:4). TG-DTA analysis indicated that an intense exothermic reaction occurred at 255 deg. C, which lead to the formation of a voluminous white powder. No additional annealing was required, as pure crystalline CaZrO{sub 3} resulted directly from the combustion reaction. Although no advanced milling was performed, the specific surface area of the powder was 21.5 m{sup 2}/g. The average crystallite size of CaZrO{sub 3} was 23.9 nm. After sintering in air at 1400 deg. C for 2 h, the pellets - shaped by uniaxial pressing at 200 MPa - reached 95% of the theoretical density, had no open pores and were slightly translucent. - Graphical abstract: Single-phase CaZrO{sub 3} powder was prepared by low-temperature combustion synthesis. The resulting powder had a BET area of 21.5 m{sup 2}/g. After sintering at 1400 deg. C for 2 h 95% of the theoretical density was reached.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Changes of (KGd)2Ta2O7 Pyrochlore at High Pressure

The structure of K-bearing tantalate pyrochlore (K{sub 2-x}Gd{sub x})Ta{sub 2}O{sub 6+x}(x {approx} 0.4) was studied at high pressures using in situ X-ray diffraction and Raman scattering methods. Experimental results indicated that (K{sub 2-x}Gd{sub x})Ta{sub 2}O{sub 6+x}(x {approx} 0.4) retains the pyrochlore structure up to 40 GPa, but partial amorphization occurred at pressures above 23 GPa. The amorphous phase was also confirmed in the quenched sample by means of transmission electron microscopy. The tantalate pyrochlore lattice is more stable than pyrochlore compounds in other systems, such as rare earth titanates, zirconates and stannates. The structural stability of pyrochlore tantalate may be mainly related to the size ratio of cations on the 16d and 16c sites in the lattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure synthesis and crystal structure of the lithium borate HP-LiB{sub 3}O{sub 5}

The new lithium borate HP-LiB{sub 3}O{sub 5} was synthesized under high-pressure/high-temperature conditions of 6 GPa and 1050 deg. C in a multianvil press with a Walker-type module. The compound crystallizes in the space group Pnma (no. 62) with the lattice parameters a=829.7(2), b=759.6(2), and c=1726.8(4) pm (Z=16). The high-pressure compound HP-LiB{sub 3}O{sub 5} is built up from a three-dimensional network of BO{sub 4} tetrahedra and BO{sub 3} groups, which incorporates Li{sup +} ions in channels along the b-axis. Band assignments of measured IR- and Raman spectra were done via quantum-mechanical calculations. Additionally, the thermal behavior of HP-LiB{sub 3}O{sub 5} was investigated. - Graphical abstract: The new high-pressure compound HP-LiB{sub 3}O{sub 5} is built up from a three-dimensional network of BO4 tetrahedra and BO{sub 3} groups, which incorporates Li{sup +} ions in channels along the b-axis. In this paper, the synthesis, the crystal structure, and the properties of HP-LiB{sub 3}O{sub 5} are described. Highlights: > Synthesis of a new lithium borate with the composition HP-LiB{sub 3}O{sub 5} at high pressure. > In contrast to the non-centrosymmetric phase LiB{sub 3}O{sub 5}, this high-pressure phase is centrosymmetric. > First example of ternary alkali borates exhibiting threefold bridging oxygen atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-induced phase transitions in multiferroic RbFe(MoO{sub 4}){sub 2}-Raman scattering study

High pressure Raman scattering experiments were performed on RbFe(MoO{sub 4}){sub 2}. These experiments revealed that two phase transitions take place in RbFe(MoO{sub 4}){sub 2} at very low pressures, i.e. between ambient pressure and 0.2 GPa and between 0.4 and 0.7 GPa. Raman results showed that at the first phase transition the room temperature P3-bar m1 phase transforms into the P3-bar phase, which is also observed at ambient pressure below 190 K. The second pressure-induced phase transition occurs into a low symmetry phase of unknown symmetry. The performed lattice dynamics calculations for the P3-bar m1 phase and ab initio calculation of the structural changes under hydrostatic pressure helped us to get better insights into the mechanism of the observed phase transitions. - Graphical abstract: Raman spectra of RbFe(MoO{sub 4}){sub 2} crystal in the high wavenumber region recorded at different pressures during compression experiment. Highlights: > RbFe(MoO{sub 4}){sub 2} exhibits two pressure-induced phase transitions below 0.7 GPa. > First phase transition is from the P3-bar m1 into P3-bar structure. > Phase transitions in RbFe(MoO{sub 4}){sub 2} are similar as in KFe(MoO{sub 4}){sub 2}. > Transitions' pressures are much lower for the rubidium compound.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of excimer formation and decay in supercritical krypton

New infrared absorbing species are identified in the pulse radiolysis of supercritical Kr at high pressures. The species are believed to be excimers. Their formation and decay rates have been time resolved using the Laser Electron Accelerator Facility. An initial species, formed in less than 1 ns, absorbs at several wavelengths between 790 and 1300 nm; The decay of this species is initially fast, followed by a slower component; the decay rate increases with pressure. As this initial species decays a second excimer is formed absorbing at 830, 890, and 990 nm. The growth and decay rates of this excimer are also pressure dependent. A third excimer, absorbing between 1000 and 1200 nm grows at a rate similar to that of the decay of the second species. The decay rate of the third species is also pressure dependent; the lifetime increases from 9.4 ns at 109 bar to 49 ns at 15 bar. A kinetic mechanism is proposed that satisfactorily reproduces the experimental results. The first species is identified as a higher energy gerade triplet state excimer and the second as the singlet gerade state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vibrational dynamics of permanently densified GeO{sub 2} glasses: Densification-induced changes in the boson peak

Vitreous GeO{sub 2}, one of the main prototypes of strong glasses, was densified at several pressures up to 6 GPa, achieving more than 20% of densification. The density dependence of the vibrational density of states and of the low temperature properties of these glasses was investigated by means of inelastic neutron scattering and calorimetric measurements. With increasing density, both the boson peak and the bump in c{sub p}/T{sup 3} versus T plot exhibit variations which are stronger than the elastic medium expectation. If one reduces the measured spectra to a common master curve, one finds that this is only possible for the densified samples; the first densification step has an additional effect, similar to other cases in the literature. Nevertheless, the existence of a master curve for the three densified samples proves that the total number of excess modes remains constant on further densification. The experimental data are discussed in the framework of different theoretical models.

36 MATERIALS SCIENCE↗

Self-Pierce Riveting of Three Aluminium Alloy and Mild Steel Sheets

Three aluminium alloy and steel sheets were joined with a self-piercing rivet. Self-pierce riveting has the function of joining steel and aluminium alloys having very different melting points due to plastic joining. The requisites for joining the three sheets are the driving of the rivet leg through the middle sheet, the flaring of the rivet leg in the lower sheet and the prevention of the fracture of the lower sheet. The joinability for various combinations of the three sheets was determined. When the rivet leg is small, no driving through the middle sheet occurs, the lower sheet ruptures for a large rivet leg. In addition, 980 MPa high strength steel, mild steel and aluminium alloy sheets were joined by the self-pierce riveting.

36 MATERIALS SCIENCE↗

Springback Analysis of Draw-Bending of 980 MPa Cold Rolled Steel Sheet and Its Experimental Validation

Draw-bending experiment is carried out using a 1.2 mm-thick high strength steel sheet with a tensile strength of 980 MPa and the residual curvature of the draw-bent specimens are precisely measured. The die profile of the draw-bending testing machine rotates, so that the effect of friction force on the curvature data after springback can be neglected. Moreover, in order to quantitatively evaluate the Bauschinger effect of the test material, stress reversal tests are performed using an in-plane stress reversal testing machine. Furthermore, the finite element analyses (FEA) of the draw-bending experiment are carried out. The effect of the work hardening models (isotropic or combined), element types (shell or solid), and the number of integration points in the through-thickness direction on the amount of springback (residual curvature) are investigated in detail.

36 MATERIALS SCIENCE↗

Mechanical Properties of Aluminum Matrix Composite Reinforced by Carbothermally Reduced of Fly Ash

The addition of fly ash into aluminum as reinforcement can potentially reduce the production cost and density of aluminum. However, mechanical properties of aluminum matrix composite reinforced by fly ash (MMC ALFA) have some limitations due to the characteristic of fly ash. In this study, a carbothermal reduction process of fly ash and activated carbon powder with particle size <32 {mu}m was performed prior to produce MMC ALFA.The process was carried out in a furnace at 1300 deg. C in vacuum condition under argon flow. Synthesis product was analyzed by XRD with Cu-K{sub {alpha}} radiation. From XRD analysis, it shows that the synthesis process can produce SiC powder. The synthesis product was subsequently used as reinforcement particle. Aluminum powder was mixed with 5, 10 and 15% of the synthesized powder, and then uni-axially compacted at pressure of 300 MPa. The compacted product was sintered for 2 hours in argon atmosphere at temperature variation of 550 and 600 deg. C. Flexural strength, hardness and density of MMC ALFA's product were respectively evaluated using a four point bending test method based on ASTM C1161 standard, Brinell hardness scale and Archimedes method. The result of this study shows that the increase of weight of reinforcement can significantly increase the hardness and flexural strength of MMCs. The highest hardness and flexural strength of the MMC product are 300 kg/mm{sup 2} and 107.5 MPa, respectively.

36 MATERIALS SCIENCE↗

Explosion Clad for Upstream Oil and Gas Equipment

Today's upstream oil and gas facilities frequently involve the combination of high pressures, high temperatures, and highly corrosive environments, requiring equipment that is thick wall, corrosion resistant, and cost effective. When significant concentrations of CO{sub 2} and/or H{sub 2}S and/or chlorides are present, corrosion resistant alloys (CRA) can become the material of choice for separator equipment, piping, related components, and line pipe. They can provide reliable resistance to both corrosion and hydrogen embrittlement. For these applications, the more commonly used CRA's are 316L, 317L and duplex stainless steels, alloy 825 and alloy 625, dependent upon the application and the severity of the environment. Titanium is also an exceptional choice from the technical perspective, but is less commonly used except for heat exchangers. Explosion clad offers significant savings by providing a relatively thin corrosion resistant alloy on the surface metallurgically bonded to a thick, lower cost, steel substrate for the pressure containment. Developed and industrialized in the 1960's the explosion cladding technology can be used for cladding the more commonly used nickel based and stainless steel CRA's as well as titanium. It has many years of proven experience as a reliable and highly robust clad manufacturing process. The unique cold welding characteristics of explosion cladding reduce problems of alloy sensitization and dissimilar metal incompatibility. Explosion clad materials have been used extensively in both upstream and downstream oil, gas and petrochemical facilities for well over 40 years. The explosion clad equipment has demonstrated excellent resistance to corrosion, embrittlement and disbonding. Factors critical to insure reliable clad manufacture and equipment design and fabrication are addressed.

36 MATERIALS SCIENCE↗

Great thermoelectric power factor enhancement of CoSb{sub 3} through the lightest metal element filling

Lithium, the lightest metal element with a small ionic radius, is successfully filled into the voids of CoSb{sub 3} by utilizing the high pressure synthesis technique. The synthesized Li{sub 0.4}Co{sub 4}Sb{sub 12} shows the largest thermoelectric power factor of 6000 {mu}W m{sup -1} K{sup -2} among all elemental filled CoSb{sub 3} materials. This significantly enhanced thermoelectric power factor is attributed to the large carrier mobility of Li{sub 0.4}Co{sub 4}Sb{sub 12}, 61 cm{sup 2} V{sup -1} s{sup -1}, featuring a good electron crystal property for the Li-filled CoSb{sub 3} samples.

36 MATERIALS SCIENCE↗

Residual stress-dependent electric conductivity of sputtered co-doped CeO{sub 2} thin-film electrolyte

Sm{sup 3+} and Nd{sup 3+} co-doped ceria thin-film electrolytes have been deposited on polycrystalline alumina substrates via RF magnetron sputtering. Electric conductivity is evaluated with respect to the residual stress in the film by sin{sup 2} {psi}-methodology, indicating that an in-plane tensile stress is applied to the as-deposited film. The stress in the film increases as annealing temperature decreases, and there is an enlarged crystal lattice. The results also reveal that the annealed film with a greater stress shows a higher electric conductivity, which might be due to the lower activation energy. The conductivity of the film annealed at 600 deg. C is as high as 0.009 S cm{sup -1} at 500 deg. C, and the residual stress is determined to be 542.70 MPa at room temperature.

36 MATERIALS SCIENCE↗

Kinetics of the active medium of a He-Sr{sup +} recombination laser: 2. Achievable energy characteristics

The mechanisms limiting the improvement of the energy characteristics of He-Sr{sup +} recombination lasers with increasing pressure, active volume, and pulse repetition rate are analysed. It is found that the existence of optimal pressure is related to the cooling rate limitation for electrons at high pressures arising from the heating action of the trailing edge of a current pulse and that the average power saturation with increasing discharge tube diameter and pulse repetition rate occurs due to the formation of radial nonuniformity as well as due to the growth of the electron temperature in the afterglow. Calculations involving a mathematical model showed that the attainable maximum of the linear power is equal to {approx}6.2 W m{sup -1} for self-heating active elements of BeO ceramics and to {approx}7.8 W m{sup -1} with its surface blackened, to {approx}7.7 W m{sup -1} for an independent introduction of the vapour and to {approx}9.4 W m{sup -1} in combination with blackening, to {approx}17 W m{sup -1} for intense forced cooling of the active elements of cylindrical geometry and to {approx}29 W m{sup -1} with active elements of rectangular cross section for a wall dimension ratio of 1:3. We demonstrate the feasibility of raising the output power by {approx}21% in the excitation of the active medium by pulse bursts with a short interpulse separation. (lasers and amplifiers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Deactivation of krypton atoms in the metastable 5s({sup 3}P{sub 2}) state in collisions with krypton and argon atoms

The collision deactivation of the metastable 5s[3/2]{sub 2}{sup o}({sup 3}P{sub 2}) state of krypton atoms is studied by the absorption probe method in electron-beam-excited high-pressure Ar-Kr mixtures with a low krypton content. The rate constants of plasma-chemical reactions Kr* + Kr + Ar {yields} Kr{sub 2}* + Ar [(4.1{+-}0.4)x10{sup -33} cm{sup 6} s{sup -1}] and Kr* + 2Ar {yields} ArKr* + Ar (less than 10{sup -35} cm{sup 6} s{sup -1}) are measured for the first time and the rate constant of the reaction Kr* + Ar {yields} products + Ar [(3.8{+-}0.4)x10{sup -15} cm{sup 3} s{sup -1}] is refined. (active media)

74 ATOMIC AND MOLECULAR PHYSICS↗

Collision-induced amplification of radiation in inversionless two-level systems

Amplification of probe radiation by an inversionless two-level system in the 'red' wing of its spectral line is studied theoretically during the resonance absorption of intense cw laser radiation. The effect is caused by the inequality of the spectral densities of the Einstein coefficients for absorption and stimulated emission outside the absorption line under conditions when homogeneous broadening, due to the interaction of particles with the buffer gas, significantly exceeds the natural broadening (at high pressures of the buffer gas). It is found that the larger the inversionless gain, the higher the buffer gas pressure and the pump radiation intensity. It is established that at high enough pump intensity, the probe field is amplified along the entire region of the 'red' wing of the line (at any negative detunings of the probe field frequency). (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗