Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PM2.5”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

A Multi-Analysis Approach for Estimating Regional Health Impacts from the 2017 Northern California Wildfires

In the evening of October 8 and early hours of October 9, 2017, high winds in Northern California downed trees and power lines, igniting some of the most devastating wildfires the state had seen, and within hours unhealthy air quality impacted millions of people. We simulated these air quality conditions using fire detection information from the MODIS, VIIRS, and GOES-16 ABI satellite instruments, and applying a set of three WRF–CMAQ simulations, one data fusion, and three machine learning methods. We investigated using the 5-min available GOES-16 fire detection data to simulate timing of fire activity to allocate emissions hourly for the WRF-CMAQ air quality modeling system. Interestingly, this approach did not necessarily improve results compared to the baseline case, which used a default time profile. However, this approach was key to simulating the initial 12-hr explosive fire activity and smoke impacts. The WRF-CMAQ simulations compared well with observational data for the October 8-15 time period and tended to overestimate concentrations October 16-20. To improve these results, we applied three machine learning algorithms. We also had a unique opportunity to evaluate results with temporary monitors deployed specifically for wildfires, and performance was markedly different. For example, at the permanent monitoring locations, the WRF-CMAQ simulations had a Pearson correlation of 0.65, and the data fusion approach improved this (Pearson correlation = 0.95), while at the temporary monitor locations across the WRF-CMAQ, data fusion, and machine learning datasets, the best Pearson correlation was 0.5. The data fusion and machine learning results were biased low and WRF-CMAQ results were biased high. Finally, we applied the optimized PM2.5 exposure estimate in a short-term exposure-response function. Total estimated mortality attributable to PM2.5 exposure during the smoke episode was 83 (95% confidence interval: 0, 196) with 47% of these deaths attributable to wildland fire smoke.

O'Neill, Susan↗

Predicting Lung Cancer Incidence from Air Pollution Exposures Using Shapelet-based Time Series Analysis

In this paper we investigated whether the geographical variation of lung cancer incidence can be predicted through examining the spatiotemporal trend of particulate matter air pollution levels. Regional trends of air pollution levels were analyzed by a novel shapelet-based time series analysis technique. First, we identified U.S. counties with reportedly high and low lung cancer incidence between 2008 and 2012 via the State Cancer Profiles provided by the National Cancer Institute. Then, we collected particulate matter exposure levels (PM2.5 and PM10) of the counties for the previous decade (1998-2007) via the AirData dataset provided by the Environmental Protection Agency. Using shapelet-based time series pattern mining, regional environmental exposure profiles were examined to identify frequently occurring sequential exposure patterns. Finally, a binary classifier was designed to predict whether a U.S. region is expected to experience high lung cancer incidence based on the region’s PM2.5 and PM10 exposure the decade prior. The study confirmed the association between prolonged PM exposure and lung cancer risk. In addition, the study findings suggest that not only cumulative exposure levels but also the temporal variability of PM exposure influence lung cancer risk.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Response of consumer and research grade indoor air quality monitors to residential sources of fine particles

The ability to inexpensively monitor PM2.5 to identify sources and enable controls would advance residential indoor air quality (IAQ) management. Consumer IAQ monitors incorporating low-cost optical particle sensors and connections with smart home platforms could provide this service if they reliably detect PM 2.5 in homes. In this study, particles from typical residential sources were generated in a 120 m 3 laboratory and time-concentration profiles were measured with 7 consumer monitors (2-3 units each), 2 research monitors (Thermo pDR-1500, MetOne BT-645), a Grimm Mini Wide-Range Aerosol Spectrometer (GRM), and a Tapered Element Oscillating Microbalance with Filter Dynamic Measurement System (FDMS), a Federal Equivalent Method for PM2.5. Sources included recreational combustion (candles, cigarettes, incense), cooking activities, an unfiltered ultrasonic humidifier, and dust. FDMS measurements, filter samples, and known densities were used to adjust the GRM to obtain time-resolved mass concentrations. Data from the research monitors and 4 of the consumer monitors—AirBeam, AirVisual, Foobot, Purple Air—were time correlated and within a factor of 2 of the estimated mass concentrations for most sources. In conclusion, all 7 of the consumer and both research monitors substantially under-reported or missed events for which the emitted mass was comprised of particles smaller than 0.3 μm diameter.

47 OTHER INSTRUMENTATION↗

Air quality and health impacts of the 2020 wildfires in California

Abstract Background Wildfires in 2020 ravaged California to set the annual record of area burned to date. Clusters of wildfires in Northern California surrounded the Bay Area covering the skies with smoke and raising the air pollutant concentrations to hazardous levels. This study uses the Fire Inventory from the National Center for Atmospheric Research database and the Community Multiscale Air Quality model to estimate the effects of wildfire emissions on air quality during the period from August 16 to October 28 of 2020. In addition, low-cost sensor data for fine particulate matter (PM 2.5 ) from the PurpleAir network is used to enhance modeled PM 2.5 concentrations. The resulting impacts on ozone and PM 2.5 are used to quantify the health impacts caused by wildfires using the Benefits Mapping and Analysis Program – Community Edition. Results Wildfire activity significantly increased direct PM 2.5 emissions and emissions of PM 2.5 and ozone precursors. Direct PM 2.5 emissions surged up to 38 times compared to an average day. Modeling results indicated that wildfires alone led to a rise in ozone daily maximum 8-h average by up to 10 ppb and exceeded PM 2.5 air quality standards in numerous locations by up to 10 times. While modeled PM 2.5 concentrations were lower than measurements, correcting these with PurpleAir data improved the accuracy. The correction using PurpleAir data increased estimates of wildfire-induced mortality due to PM 2.5 exposure by up to 16%. Conclusions The increased hospital admissions and premature mortality attributed to wildfires were found to be comparable to the health impacts avoided by strategies aimed at meeting ozone and PM2.5 air quality standards. This suggests that widespread wildfire emissions can negate years of efforts dedicated to controlling air pollution. The integration of low-cost sensor data proved invaluable in refining the estimates of health impacts from PM2.5 resulting from wildfires.

54 ENVIRONMENTAL SCIENCES↗

2013-2014 Greater Fairbanks, Alaska, Transportation Survey

The 2013-2014 Greater Fairbanks Transportation Survey obtained behavior data for regional travel demand modeling. The planning region in Alaska comprised the North Star Borough—known as the PM2.5 nonattainment region—and included the cities of Fairbanks and North Pole. The Alaska Department of Transportation and Public Facilities sponsored the survey, which was conducted by Westat. Data collection occurred in two phases: fall 2013 and winter 2014. The first phase employed address-based sampling to recruit more than 1,700 households for a one-day personal travel survey and a subsample participated with global position system (GPS) and on-board diagnostic (OBD) loggers installed in their vehicles (282 vehicles) for one week. The purpose of phase one was to better understand the impact of vehicle emissions on air quality in the PM2.5 nonattainment region. Many of the households participating in the vehicle GPS/OBD portion of phase one were asked to participate in phase two.

1Hz data↗

2013-2014 Greater Fairbanks, Alaska, Transportation Survey

# 2013–2014 Greater Fairbanks, Alaska, Transportation Survey The 2013–2014 Greater Fairbanks Transportation Survey obtained behavior data for regional travel demand modeling. The planning region in Alaska comprised the North Star Borough—known as the PM2.5 nonattainment region—and included the cities of Fairbanks and North Pole. ## Data Collection Agency The Alaska Department of Transportation and Public Facilities conducted the survey. ## Methodology Data collection occurred in two phases: the first in fall 2013 and the second in winter 2014. The first phase employed address-based sampling to recruit more than 1,700 households for a one-day personal travel survey, and a sub-sample participated with global position system (GPS) and on-board diagnostic (OBD) loggers installed in their vehicles (282 vehicles) for one week. The purpose of phase one was to better understand the impact of vehicle emissions on air quality in the PM2.5 nonattainment region. Many of the households participating in the vehicle GPS/OBD portion of phase one were asked to participate in phase two. ## Drive Cycle Processing and Filtering NREL has developed a GPS data filtration routine to filter erroneous data points in individual drive cycles sourced from GPS devices mounted in vehicles. Second-by-second drive cycle data collected from GPS-instrumented vehicles during this survey have passed through NREL's drive cycle processing and filtering routines. ## Survey Records Survey records include 135 households. ## More Information For more information about the survey, see the [Greater Fairbanks Transportation Survey Final Report](https://www.nrel.gov/media/docs/libraries/tsdc/greater-fairbanks-transportation-survey-final-report.pdf?sfvrsn=16ecd45b_1). ## Transportation Data For details on available travel survey data and variable definitions, see the [data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/akdot_data_dictionary.pdf?sfvrsn=16778e11_1). NREL-generated drive cycle data are also available for this survey. For details on available data and variable definitions, see the [drive cycle data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/drive_cycles_data_dictionary.pdf?sfvrsn=7de7e888_1). Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2013-2014 Greater Fairbanks, Alaska, Transportation Survey

# 2013–2014 Greater Fairbanks, Alaska, Transportation Survey The 2013–2014 Greater Fairbanks Transportation Survey obtained behavior data for regional travel demand modeling. The planning region in Alaska comprised the North Star Borough—known as the PM2.5 nonattainment region—and included the cities of Fairbanks and North Pole. ## Data Collection Agency The Alaska Department of Transportation and Public Facilities conducted the survey. ## Methodology Data collection occurred in two phases: the first in fall 2013 and the second in winter 2014. The first phase employed address-based sampling to recruit more than 1,700 households for a one-day personal travel survey, and a sub-sample participated with global position system (GPS) and on-board diagnostic (OBD) loggers installed in their vehicles (282 vehicles) for one week. The purpose of phase one was to better understand the impact of vehicle emissions on air quality in the PM2.5 nonattainment region. Many of the households participating in the vehicle GPS/OBD portion of phase one were asked to participate in phase two. ## Drive Cycle Processing and Filtering NREL has developed a GPS data filtration routine to filter erroneous data points in individual drive cycles sourced from GPS devices mounted in vehicles. Second-by-second drive cycle data collected from GPS-instrumented vehicles during this survey have passed through NREL's drive cycle processing and filtering routines. ## Survey Records Survey records include 135 households. ## More Information For more information about the survey, see the [Greater Fairbanks Transportation Survey Final Report](https://www.nrel.gov/media/docs/libraries/tsdc/greater-fairbanks-transportation-survey-final-report.pdf?sfvrsn=16ecd45b_1). ## Transportation Data For details on available travel survey data and variable definitions, see the [data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/akdot_data_dictionary.pdf?sfvrsn=16778e11_1). NREL-generated drive cycle data are also available for this survey. For details on available data and variable definitions, see the [drive cycle data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/drive_cycles_data_dictionary.pdf?sfvrsn=7de7e888_1). Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2013-2014 Greater Fairbanks, Alaska, Transportation Survey

# 2013–2014 Greater Fairbanks, Alaska, Transportation Survey The 2013–2014 Greater Fairbanks Transportation Survey obtained behavior data for regional travel demand modeling. The planning region in Alaska comprised the North Star Borough—known as the PM2.5 nonattainment region—and included the cities of Fairbanks and North Pole. ## Data Collection Agency The Alaska Department of Transportation and Public Facilities conducted the survey. ## Methodology Data collection occurred in two phases: the first in fall 2013 and the second in winter 2014. The first phase employed address-based sampling to recruit more than 1,700 households for a one-day personal travel survey, and a sub-sample participated with global position system (GPS) and on-board diagnostic (OBD) loggers installed in their vehicles (282 vehicles) for one week. The purpose of phase one was to better understand the impact of vehicle emissions on air quality in the PM2.5 nonattainment region. Many of the households participating in the vehicle GPS/OBD portion of phase one were asked to participate in phase two. ## Drive Cycle Processing and Filtering NREL has developed a GPS data filtration routine to filter erroneous data points in individual drive cycles sourced from GPS devices mounted in vehicles. Second-by-second drive cycle data collected from GPS-instrumented vehicles during this survey have passed through NREL's drive cycle processing and filtering routines. ## Survey Records Survey records include 135 households. ## More Information For more information about the survey, see the [Greater Fairbanks Transportation Survey Final Report](https://www.nrel.gov/media/docs/libraries/tsdc/greater-fairbanks-transportation-survey-final-report.pdf?sfvrsn=16ecd45b_1). ## Transportation Data For details on available travel survey data and variable definitions, see the [data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/akdot_data_dictionary.pdf?sfvrsn=16778e11_1). NREL-generated drive cycle data are also available for this survey. For details on available data and variable definitions, see the [drive cycle data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/drive_cycles_data_dictionary.pdf?sfvrsn=7de7e888_1). Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2013-2014 Greater Fairbanks, Alaska, Transportation Survey

# 2013–2014 Greater Fairbanks, Alaska, Transportation Survey The 2013–2014 Greater Fairbanks Transportation Survey obtained behavior data for regional travel demand modeling. The planning region in Alaska comprised the North Star Borough—known as the PM2.5 nonattainment region—and included the cities of Fairbanks and North Pole. ## Data Collection Agency The Alaska Department of Transportation and Public Facilities conducted the survey. ## Methodology Data collection occurred in two phases: the first in fall 2013 and the second in winter 2014. The first phase employed address-based sampling to recruit more than 1,700 households for a one-day personal travel survey, and a sub-sample participated with global position system (GPS) and on-board diagnostic (OBD) loggers installed in their vehicles (282 vehicles) for one week. The purpose of phase one was to better understand the impact of vehicle emissions on air quality in the PM2.5 nonattainment region. Many of the households participating in the vehicle GPS/OBD portion of phase one were asked to participate in phase two. ## Drive Cycle Processing and Filtering NREL has developed a GPS data filtration routine to filter erroneous data points in individual drive cycles sourced from GPS devices mounted in vehicles. Second-by-second drive cycle data collected from GPS-instrumented vehicles during this survey have passed through NREL's drive cycle processing and filtering routines. ## Survey Records Survey records include 135 households. ## More Information For more information about the survey, see the [Greater Fairbanks Transportation Survey Final Report](https://www.nrel.gov/media/docs/libraries/tsdc/greater-fairbanks-transportation-survey-final-report.pdf?sfvrsn=16ecd45b_1). ## Transportation Data For details on available travel survey data and variable definitions, see the [data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/akdot_data_dictionary.pdf?sfvrsn=16778e11_1). NREL-generated drive cycle data are also available for this survey. For details on available data and variable definitions, see the [drive cycle data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/drive_cycles_data_dictionary.pdf?sfvrsn=7de7e888_1). Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2013-2014 Greater Fairbanks, Alaska, Transportation Survey

# 2013–2014 Greater Fairbanks, Alaska, Transportation Survey The 2013–2014 Greater Fairbanks Transportation Survey obtained behavior data for regional travel demand modeling. The planning region in Alaska comprised the North Star Borough—known as the PM2.5 nonattainment region—and included the cities of Fairbanks and North Pole. ## Data Collection Agency The Alaska Department of Transportation and Public Facilities conducted the survey. ## Methodology Data collection occurred in two phases: the first in fall 2013 and the second in winter 2014. The first phase employed address-based sampling to recruit more than 1,700 households for a one-day personal travel survey, and a sub-sample participated with global position system (GPS) and on-board diagnostic (OBD) loggers installed in their vehicles (282 vehicles) for one week. The purpose of phase one was to better understand the impact of vehicle emissions on air quality in the PM2.5 nonattainment region. Many of the households participating in the vehicle GPS/OBD portion of phase one were asked to participate in phase two. ## Drive Cycle Processing and Filtering NREL has developed a GPS data filtration routine to filter erroneous data points in individual drive cycles sourced from GPS devices mounted in vehicles. Second-by-second drive cycle data collected from GPS-instrumented vehicles during this survey have passed through NREL's drive cycle processing and filtering routines. ## Survey Records Survey records include 135 households. ## More Information For more information about the survey, see the [Greater Fairbanks Transportation Survey Final Report](https://www.nrel.gov/media/docs/libraries/tsdc/greater-fairbanks-transportation-survey-final-report.pdf?sfvrsn=16ecd45b_1). ## Transportation Data For details on available travel survey data and variable definitions, see the [data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/akdot_data_dictionary.pdf?sfvrsn=16778e11_1). NREL-generated drive cycle data are also available for this survey. For details on available data and variable definitions, see the [drive cycle data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/drive_cycles_data_dictionary.pdf?sfvrsn=7de7e888_1). Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2013-2014 Greater Fairbanks, Alaska, Transportation Survey

# 2013–2014 Greater Fairbanks, Alaska, Transportation Survey The 2013–2014 Greater Fairbanks Transportation Survey obtained behavior data for regional travel demand modeling. The planning region in Alaska comprised the North Star Borough—known as the PM2.5 nonattainment region—and included the cities of Fairbanks and North Pole. ## Data Collection Agency The Alaska Department of Transportation and Public Facilities conducted the survey. ## Methodology Data collection occurred in two phases: the first in fall 2013 and the second in winter 2014. The first phase employed address-based sampling to recruit more than 1,700 households for a one-day personal travel survey, and a sub-sample participated with global position system (GPS) and on-board diagnostic (OBD) loggers installed in their vehicles (282 vehicles) for one week. The purpose of phase one was to better understand the impact of vehicle emissions on air quality in the PM2.5 nonattainment region. Many of the households participating in the vehicle GPS/OBD portion of phase one were asked to participate in phase two. ## Drive Cycle Processing and Filtering NREL has developed a GPS data filtration routine to filter erroneous data points in individual drive cycles sourced from GPS devices mounted in vehicles. Second-by-second drive cycle data collected from GPS-instrumented vehicles during this survey have passed through NREL's drive cycle processing and filtering routines. ## Survey Records Survey records include 135 households. ## More Information For more information about the survey, see the [Greater Fairbanks Transportation Survey Final Report](https://www.nrel.gov/media/docs/libraries/tsdc/greater-fairbanks-transportation-survey-final-report.pdf?sfvrsn=16ecd45b_1). ## Transportation Data For details on available travel survey data and variable definitions, see the [data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/akdot_data_dictionary.pdf?sfvrsn=16778e11_1). NREL-generated drive cycle data are also available for this survey. For details on available data and variable definitions, see the [drive cycle data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/drive_cycles_data_dictionary.pdf?sfvrsn=7de7e888_1). Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2013-2014 Greater Fairbanks, Alaska, Transportation Survey

# 2013–2014 Greater Fairbanks, Alaska, Transportation Survey The 2013–2014 Greater Fairbanks Transportation Survey obtained behavior data for regional travel demand modeling. The planning region in Alaska comprised the North Star Borough—known as the PM2.5 nonattainment region—and included the cities of Fairbanks and North Pole. ## Data Collection Agency The Alaska Department of Transportation and Public Facilities conducted the survey. ## Methodology Data collection occurred in two phases: the first in fall 2013 and the second in winter 2014. The first phase employed address-based sampling to recruit more than 1,700 households for a one-day personal travel survey, and a sub-sample participated with global position system (GPS) and on-board diagnostic (OBD) loggers installed in their vehicles (282 vehicles) for one week. The purpose of phase one was to better understand the impact of vehicle emissions on air quality in the PM2.5 nonattainment region. Many of the households participating in the vehicle GPS/OBD portion of phase one were asked to participate in phase two. ## Drive Cycle Processing and Filtering NREL has developed a GPS data filtration routine to filter erroneous data points in individual drive cycles sourced from GPS devices mounted in vehicles. Second-by-second drive cycle data collected from GPS-instrumented vehicles during this survey have passed through NREL's drive cycle processing and filtering routines. ## Survey Records Survey records include 135 households. ## More Information For more information about the survey, see the [Greater Fairbanks Transportation Survey Final Report](https://www.nrel.gov/media/docs/libraries/tsdc/greater-fairbanks-transportation-survey-final-report.pdf?sfvrsn=16ecd45b_1). ## Transportation Data For details on available travel survey data and variable definitions, see the [data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/akdot_data_dictionary.pdf?sfvrsn=16778e11_1). NREL-generated drive cycle data are also available for this survey. For details on available data and variable definitions, see the [drive cycle data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/drive_cycles_data_dictionary.pdf?sfvrsn=7de7e888_1). Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2013-2014 Greater Fairbanks, Alaska, Transportation Survey

# 2013–2014 Greater Fairbanks, Alaska, Transportation Survey The 2013–2014 Greater Fairbanks Transportation Survey obtained behavior data for regional travel demand modeling. The planning region in Alaska comprised the North Star Borough—known as the PM2.5 nonattainment region—and included the cities of Fairbanks and North Pole. ## Data Collection Agency The Alaska Department of Transportation and Public Facilities conducted the survey. ## Methodology Data collection occurred in two phases: the first in fall 2013 and the second in winter 2014. The first phase employed address-based sampling to recruit more than 1,700 households for a one-day personal travel survey, and a sub-sample participated with global position system (GPS) and on-board diagnostic (OBD) loggers installed in their vehicles (282 vehicles) for one week. The purpose of phase one was to better understand the impact of vehicle emissions on air quality in the PM2.5 nonattainment region. Many of the households participating in the vehicle GPS/OBD portion of phase one were asked to participate in phase two. ## Drive Cycle Processing and Filtering NREL has developed a GPS data filtration routine to filter erroneous data points in individual drive cycles sourced from GPS devices mounted in vehicles. Second-by-second drive cycle data collected from GPS-instrumented vehicles during this survey have passed through NREL's drive cycle processing and filtering routines. ## Survey Records Survey records include 135 households. ## More Information For more information about the survey, see the [Greater Fairbanks Transportation Survey Final Report](https://www.nrel.gov/media/docs/libraries/tsdc/greater-fairbanks-transportation-survey-final-report.pdf?sfvrsn=16ecd45b_1). ## Transportation Data For details on available travel survey data and variable definitions, see the [data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/akdot_data_dictionary.pdf?sfvrsn=16778e11_1). NREL-generated drive cycle data are also available for this survey. For details on available data and variable definitions, see the [drive cycle data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/drive_cycles_data_dictionary.pdf?sfvrsn=7de7e888_1). Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2013-2014 Greater Fairbanks, Alaska, Transportation Survey

# 2013–2014 Greater Fairbanks, Alaska, Transportation Survey The 2013–2014 Greater Fairbanks Transportation Survey obtained behavior data for regional travel demand modeling. The planning region in Alaska comprised the North Star Borough—known as the PM2.5 nonattainment region—and included the cities of Fairbanks and North Pole. ## Data Collection Agency The Alaska Department of Transportation and Public Facilities conducted the survey. ## Methodology Data collection occurred in two phases: the first in fall 2013 and the second in winter 2014. The first phase employed address-based sampling to recruit more than 1,700 households for a one-day personal travel survey, and a sub-sample participated with global position system (GPS) and on-board diagnostic (OBD) loggers installed in their vehicles (282 vehicles) for one week. The purpose of phase one was to better understand the impact of vehicle emissions on air quality in the PM2.5 nonattainment region. Many of the households participating in the vehicle GPS/OBD portion of phase one were asked to participate in phase two. ## Drive Cycle Processing and Filtering NREL has developed a GPS data filtration routine to filter erroneous data points in individual drive cycles sourced from GPS devices mounted in vehicles. Second-by-second drive cycle data collected from GPS-instrumented vehicles during this survey have passed through NREL's drive cycle processing and filtering routines. ## Survey Records Survey records include 135 households. ## More Information For more information about the survey, see the [Greater Fairbanks Transportation Survey Final Report](https://www.nrel.gov/media/docs/libraries/tsdc/greater-fairbanks-transportation-survey-final-report.pdf?sfvrsn=16ecd45b_1). ## Transportation Data For details on available travel survey data and variable definitions, see the [data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/akdot_data_dictionary.pdf?sfvrsn=16778e11_1). NREL-generated drive cycle data are also available for this survey. For details on available data and variable definitions, see the [drive cycle data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/drive_cycles_data_dictionary.pdf?sfvrsn=7de7e888_1). Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2013-2014 Greater Fairbanks, Alaska, Transportation Survey

# 2013–2014 Greater Fairbanks, Alaska, Transportation Survey The 2013–2014 Greater Fairbanks Transportation Survey obtained behavior data for regional travel demand modeling. The planning region in Alaska comprised the North Star Borough—known as the PM2.5 nonattainment region—and included the cities of Fairbanks and North Pole. ## Data Collection Agency The Alaska Department of Transportation and Public Facilities conducted the survey. ## Methodology Data collection occurred in two phases: the first in fall 2013 and the second in winter 2014. The first phase employed address-based sampling to recruit more than 1,700 households for a one-day personal travel survey, and a sub-sample participated with global position system (GPS) and on-board diagnostic (OBD) loggers installed in their vehicles (282 vehicles) for one week. The purpose of phase one was to better understand the impact of vehicle emissions on air quality in the PM2.5 nonattainment region. Many of the households participating in the vehicle GPS/OBD portion of phase one were asked to participate in phase two. ## Drive Cycle Processing and Filtering NREL has developed a GPS data filtration routine to filter erroneous data points in individual drive cycles sourced from GPS devices mounted in vehicles. Second-by-second drive cycle data collected from GPS-instrumented vehicles during this survey have passed through NREL's drive cycle processing and filtering routines. ## Survey Records Survey records include 135 households. ## More Information For more information about the survey, see the [Greater Fairbanks Transportation Survey Final Report](https://www.nrel.gov/media/docs/libraries/tsdc/greater-fairbanks-transportation-survey-final-report.pdf?sfvrsn=16ecd45b_1). ## Transportation Data For details on available travel survey data and variable definitions, see the [data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/akdot_data_dictionary.pdf?sfvrsn=16778e11_1). NREL-generated drive cycle data are also available for this survey. For details on available data and variable definitions, see the [drive cycle data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/drive_cycles_data_dictionary.pdf?sfvrsn=7de7e888_1). Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2013-2014 Greater Fairbanks, Alaska, Transportation Survey

# 2013–2014 Greater Fairbanks, Alaska, Transportation Survey The 2013–2014 Greater Fairbanks Transportation Survey obtained behavior data for regional travel demand modeling. The planning region in Alaska comprised the North Star Borough—known as the PM2.5 nonattainment region—and included the cities of Fairbanks and North Pole. ## Data Collection Agency The Alaska Department of Transportation and Public Facilities conducted the survey. ## Methodology Data collection occurred in two phases: the first in fall 2013 and the second in winter 2014. The first phase employed address-based sampling to recruit more than 1,700 households for a one-day personal travel survey, and a sub-sample participated with global position system (GPS) and on-board diagnostic (OBD) loggers installed in their vehicles (282 vehicles) for one week. The purpose of phase one was to better understand the impact of vehicle emissions on air quality in the PM2.5 nonattainment region. Many of the households participating in the vehicle GPS/OBD portion of phase one were asked to participate in phase two. ## Drive Cycle Processing and Filtering NREL has developed a GPS data filtration routine to filter erroneous data points in individual drive cycles sourced from GPS devices mounted in vehicles. Second-by-second drive cycle data collected from GPS-instrumented vehicles during this survey have passed through NREL's drive cycle processing and filtering routines. ## Survey Records Survey records include 135 households. ## More Information For more information about the survey, see the [Greater Fairbanks Transportation Survey Final Report](https://www.nrel.gov/media/docs/libraries/tsdc/greater-fairbanks-transportation-survey-final-report.pdf?sfvrsn=16ecd45b_1). ## Transportation Data For details on available travel survey data and variable definitions, see the [data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/akdot_data_dictionary.pdf?sfvrsn=16778e11_1). NREL-generated drive cycle data are also available for this survey. For details on available data and variable definitions, see the [drive cycle data dictionary](https://www.nrel.gov/media/docs/libraries/tsdc/drive_cycles_data_dictionary.pdf?sfvrsn=7de7e888_1). Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A Study of the Use of Jatropha Oil Blends in Boilers

Executive Summary: This project investigated the combustion performance of blends of unrefined Jatropha oil and its blends in laboratory boilers. Although a very limited amount of testing blends in distillate oil, ASTM No. 2 oil or heating oil was conducted, the primary interest was in testing the performance of blends with residual ASTM No. 6 oil. The basic idea is to provide a renewable fuel option to residual oil used in space heating and in industrial applications. The intent also was to explore the use of non-edible plant oil and one that might be potentially cheaper than biodiesel. The characteristics of No. 6 oil, such as high viscosity at ambient temperature, which requires it to be kept heated, make the blending with such oils feasible. Jatropha oil is one such oil and there is currently considerable interest building up in its use as a source for making biodiesel and jet fuel. A 10% blend of Jatropha oil with heating oil was burned using a standard burner in a residential boiler. Combustion performance was shown to be comparable with that of burning heating oil by itself with some noticeable differences. Typical heating oil has about 2000 ppm of sulfur, while the Jatropha oil has about 50 ppm leading to lower levels of sulphur dioxide emissions. Stack measurements also showed that the NOx emission was lower with the blend. We have previously reported similar reductions in NOx with blends of biodiesel in heating oil as well as slight reductions in PM2.5, particulates below 2.5 microns in size. Long term tests were not part of this project and hence deleterious effects on pumps, seals etc., if any, were not measured. The majority of the work involved testing blends of Jatropha oil with residual oil in a 1.5 million Btu/hr boiler with a burner modified to burn residual oil. Blends of 20 and 60% Jatropha oil and 100% Jatropha oil were burned in the combustion performance tests. The residual oil used had a sulfur content of over 2000 ppm and hence dramatic reductions in sulfur dioxide emissions are measured with the blends. Again, consistent with our past experience with biodiesel blends, significant reductions in nitrogen oxide emissions nearing 50% with 100% Jatropha oil, were also measured. This is in contrast with the use of biodiesel in diesel engines, where the NOx has a tendency to increase. In addition to the gaseous emission measurements, particulate emissions were measured using an EPA CTM-39 system to obtain both particulates, of sizes below 2.5 microns, so-called PM2.5, and of sizes larger than 2.5 microns. The results show that the particulate emissions are lower with the blending of Jatropha oil. Overall, one can conclude that the blending of Jatropha oil with residual oil is a feasible approach to using non-edible plant oil to provide a renewable content to residual oil, with significant benefits in the reduction of pollutant emissions such as sulfur dioxide, nitrogen oxides and particulates.

02 PETROLEUM↗

Estimating Policy-Driven Greenhouse Gas Emissions Trajectories in California: The California Greenhouse Gas Inventory Spreadsheet (GHGIS) Model

A California Greenhouse Gas Inventory Spreadsheet (GHGIS) model was developed to explore the impact of combinations of state policies on state greenhouse gas (GHG) and regional criteria pollutant emissions. The model included representations of all GHG- emitting sectors of the California economy (including those outside the energy sector, such as high global warming potential gases, waste treatment, agriculture and forestry) in varying degrees of detail, and was carefully calibrated using available data and projections from multiple state agencies and other sources. Starting from basic drivers such as population, numbers of households, gross state product, numbers of vehicles, etc., the model calculated energy demands by type (various types of liquid and gaseous hydrocarbon fuels, electricity and hydrogen), and finally calculated emissions of GHGs and three criteria pollutants: reactive organic gases (ROG), nitrogen oxides (NOx), and fine (2.5 ?m) particulate matter (PM2.5). Calculations were generally statewide, but in some sectors, criteria pollutants were also calculated for two regional air basins: the South Coast Air Basin (SCAB) and the San Joaquin Valley (SJV). Three scenarios were developed that attempt to model: (1) all committed policies, (2) additional, uncommitted policy targets and (3) potential technology and market futures. Each scenario received extensive input from state energy planning agencies, in particular the California Air Resources Board. Results indicate that all three scenarios are able to meet the 2020 statewide GHG targets, and by 2030, statewide GHG emissions range from between 208 and 396 MtCO2/yr. However, none of the scenarios are able to meet the 2050 GHG target of 85 MtCO2/yr, with emissions ranging from 188 to 444 MtCO2/yr, so additional policies will need to be developed for California to meet this stringent future target. A full sensitivity study of major scenario assumptions was also performed. In terms of criteria pollutants, targets were less well-defined, but while all three scenarios were able to make significant reductions in ROG, NOx and PM2.5 both statewide and in the two regional air basins, they may nonetheless fall short of what will be required by future federal standards. Specifically, in Scenario 1, regional NOx emissions are approximately three times the estimated targets for both 2023 and 2032, and in Scenarios 2 and 3, NOx emissions are approximately twice the estimated targets. Further work is required in this area, including detailed regional air quality modeling, in order to determine likely pathways for attaining these stringent targets.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗