Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARALLEL OPTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Machine Studies During Beam Commissioning of the SPS-to-LHC Transfer Lines

Through May to September 2008, further beam commissioning of the SPS-to-LHC transfer lines was performed. For the first time, optics and dispersion measurements were also taken in the last part of the lines, and into the LHC. Extensive trajectory and optics studies were conducted, in parallel with hardware checks. In particular dispersion measurements and their comparison with the beam line model were analysed in detail and led to propose the addition of a dispersion-free steering algorithm in the existing trajectory correction program. Its effectiveness was simulated and is briefly discussed.

43 PARTICLE ACCELERATORS↗

Optical electron spin orientation in Ga-doped and undoped ZnO films

We have studied the optical orientation and polarization relaxation dynamics of electron spins in Ga-doped and undoped ZnO films by time-resolved Kerr rotation (TRKR). In the Ga-doped film, we have observed a long-lived spin signal more than 10 ns when the pump-probe energy is resonant to the neutral donor-bound excitons (D deg. X). It is not observed in the undoped film. Meanwhile, when the energy is resonant to free excitons, faster spin relaxation of about 2 ns is observed for itinerant electrons in both the films. The optical spin orientation is always parallel to the c-axis in the ZnO films, and independent of the pump incidence angle. This contrasts with the observation in crystals with the zincblende structure.

36 MATERIALS SCIENCE↗

High-speed volume measurement system and method

Disclosed is a volume sensor having first, second, and third laser sources emitting first, second, and third laser beams; first, second, and third beam splitters splitting the first, second, and third laser beams into first, second, and third beam pairs; first, second, and third optical assemblies expanding the first, second, and third beam pairs into first, second, and third pairs of parallel beam sheets; fourth, fifth, and sixth optical assemblies focusing the first, second, and third beam sheet pairs into fourth, fifth, and sixth beam pairs; and first, second, and third detector pairs receiving the fourth, fifth, and sixth beam pairs and converting a change in intensity of at least one of the beam pairs resulting from an object passing through at least one of the first, second, and third parallel beam sheets into at least one electrical signal proportional to a three-dimensional representation of the object.

43 PARTICLE ACCELERATORS↗

High-speed volume measurement system and method

Disclosed is a volume sensor having first, second, and third laser sources emitting first, second, and third laser beams; first, second, and third beam splitters splitting the first, second, and third laser beams into first, second, and third beam pairs; first, second, and third optical assemblies expanding the first, second, and third beam pairs into first, second, and third pairs of parallel beam sheets; fourth, fifth, and sixth optical assemblies focusing the first, second, and third beam sheet pairs into fourth, fifth, and sixth beam pairs; and first, second, and third detector pairs receiving the fourth, fifth, and sixth beam pairs and converting a change in intensity of at least one of the beam pairs resulting from an object passing through at least one of the first, second, and third parallel beam sheets into at least one electrical signal proportional to a three-dimensional representation of the object.

47 OTHER INSTRUMENTATION↗

The road to atomically thin metasurface optics

Abstract The development of flat optics has taken the world by storm. The initial mission was to try and replace conventional optical elements by thinner, lightweight equivalents. However, while developing this technology and learning about its strengths and limitations, researchers have identified a myriad of exciting new opportunities. It is therefore a great moment to explore where flat optics can really make a difference and what materials and building blocks are needed to make further progress. Building on its strengths, flat optics is bound to impact computational imaging, active wavefront manipulation, ultrafast spatiotemporal control of light, quantum communications, thermal emission management, novel display technologies, and sensing. In parallel with the development of flat optics, we have witnessed an incredible progress in the large-area synthesis and physical understanding of atomically thin, two-dimensional (2D) quantum materials. Given that these materials bring a wealth of unique physical properties and feature the same dimensionality as planar optical elements, they appear to have exactly what it takes to develop the next generation of high-performance flat optics.

Brongersma, Mark L.↗

Single-Photon Counting Detector Scalability for High Photon Efficiency Optical Communications Links

For high photon-efficiency deep space or low power optical communications links, such as the Orion Artemis-2 Optical Communications System (O2O) project, the received optical signal is attenuated to the extent that single- photon detectors are required. For direct-detection receivers operating at 1.55 µm wavelength, single-photon detectors including Geiger-mode InGaAs avalanche photon diodes (APDs), and in particular superconducting nanowire single-photon detectors (SNSPDs) offer the highest sensitivity and fastest detection speeds. However, these photon detectors exhibit a recovery time between registered input pulses, effectively reducing the detection efficiency over the recovery interval, resulting in missed photon detections, reduced count rate, and ultimately limiting the achievable data rate. A method to overcome this limitation is to divide the received optical signal into multiple detectors in parallel. Here we analyze this approach for a receiver designed to receive a high photon efficiency serially concatenated pulse position modulation (SCPPM) input waveform. From measured count rate and efficiency data using commercial SNSPDs, we apply a model from which we determine the effective detection efficiency, or blocking loss, for different input signal rates. We analyze the scalability of adding detectors in parallel for different modulation orders and background levels to achieve desired data rates. Finally we show tradeoffs between the number of detectors and the required received optical power, useful for real link design considerations.

Vyhnalek, Brian E.↗

Angle-resolved and internuclear-separation-resolved measurements of the ionization rate of the B state of I{sub 2} by strong laser fields

Angle-resolved and internuclear-separation-resolved measurements of the single ionization rate of neutral I{sub 2} have been obtained. By launching a wave packet in the B {sup 3}{Pi}{sub u}{sup +} state (B state) of I{sub 2} with a 50-fs tunable pump pulse we can measure the ionization rate as a function of internuclear separation as the wave packet evolves in the B state. Moreover, since the ground to B-state optical transition dipole moment is parallel to the internuclear axis, the B-state subpopulation of the I{sub 2} thermal ensemble will have a high degree of alignment, allowing for angular measurements. The B state shows the well-known effect of enhanced ionization at a critical separation, R{sub c}, with an enhancement factor of 22 when the ionizing field is polarized along the internuclear axis and the enhanced ionization decreases when the angle between the field and the axis increases from 0 deg. to 90 deg., finally disappearing at 90 deg. These results on the enhanced ionization of the B state of I{sub 2} give the most precise determination of R{sub c} for any molecule and agree extremely well with the prediction from a simple model of electron localization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Density waves in Saturn's rings probed by radio and optical occultation - Observational tests of theory

A parallel examination is conducted of Voyager radio and photopolarimeter occultation observations of the Saturn A ring's density waves. The radio instrument waves exhibit an average -90 deg offset from the dynamical phase. A warping height of about 100-m amplitude can qualtitatively reproduce this phase shift, while preserving the overall model wave shape. These results may be profoundly relevant for satellite-ring torque calculations in Saturn's rings, given the deposition of all of the net torque of the standard model in the first wavelength.

Brophy, Thomas G.↗

Vertical bloch line memory

A new read gate design for the vertical Bloch line (VBL) memory is disclosed which offers larger operating margin than the existing read gate designs. In the existing read gate designs, a current is applied to all the stripes. The stripes that contain a VBL pair are chopped, while the stripes that do not contain a VBL pair are not chopped. The information is then detected by inspecting the presence or absence of the bubble. The margin of the chopping current amplitude is very small, and sometimes non-existent. A new method of reading Vertical Bloch Line memory is also disclosed. Instead of using the wall chirality to separate the two binary states, the spatial deflection of the stripe head is used. Also disclosed herein is a compact memory which uses vertical Bloch line (VBL) memory technology for providing data storage. A three-dimensional arrangement in the form of stacks of VBL memory layers is used to achieve high volumetric storage density. High data transfer rate is achieved by operating all the layers in parallel. Using Hall effect sensing, and optical sensing via the Faraday effect to access the data from within the three-dimensional packages, an even higher data transfer rate can be achieved due to parallel operation within each layer.

Katti, Romney R.↗

Ordinary and extraordinary dielectric functions of rutile SnO{sub 2} up to 20 eV

Spectroscopic ellipsometry at room temperature is applied in order to determine the ordinary (ε{sub ⊥}) and extraordinary (ε{sub ∥}) dielectric functions (DFs) of rutile SnO{sub 2} corresponding to electric field (E) polarization perpendicular (E⊥c) and parallel (E∥c) to the optical axis (c), respectively. Strong anisotropic behavior is found for the full spectral range from 0.5 up to 20 eV. The onsets of strong absorption are found at 4.28 eV and 5.42 eV for E⊥c and E∥c, respectively. A dipole-forbidden band gap at (3.59 ± 0.2) eV at room temperature is found by line shape fits to the imaginary parts of the DFs. Further high-energy transitions are resolved. Their accurate energy values are obtained by fitting the second derivatives of the DFs. Comparison to published DFs calculated by ab-initio theory demonstrates that the electron-hole interaction in SnO{sub 2} is strong and has to be included for interpretation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bright galaxies at Hubble’s REDSHIFT detection frontier: Preliminary results and design from the redshift z ∼ 9–10 BoRG pure-parallel HST survey

We present the first results and design from the redshift z ∼ 9–10 Brightest of the Reionizing Galaxies Hubble Space Telescope survey BoRG[z9–10], aimed at searching for intrinsically luminous unlensed galaxies during the first 700 Myr after the Big Bang. BoRG[z9–10] is the continuation of a multi-year pure-parallel near-IR and optical imaging campaign with the Wide Field Camera 3. The ongoing survey uses five filters, optimized for detecting the most distant objects and offering continuous wavelength coverage from λ = 0.35 μm to λ = 1.7 μm. We analyze the initial ∼130 arcmin{sup 2} of area over 28 independent lines of sight (∼25% of the total planned) to search for z>7 galaxies using a combination of Lyman-break and photometric redshift selections. From an effective comoving volume of (5–25) × 10{sup 5} Mpc{sup 3} for magnitudes brighter than m{sub AB}=26.5--24.0 in the H{sub 160}-band respectively, we find five galaxy candidates at z ∼ 8.3–10 detected at high confidence (S/N>8), including a source at z ∼ 8.4 with m{sub AB}=24.5 (S/N ∼ 22), which, if confirmed, would be the brightest galaxy identified at such early times (z>8). In addition, BoRG[z9–10] data yield four galaxies with 7.3≲z≲8. These new Lyman-break galaxies with m≲26.5 are ideal targets for follow-up observations from ground and space-based observatories to help investigate the complex interplay between dark matter growth, galaxy assembly, and reionization.

79 ASTRONOMY AND ASTROPHYSICS↗

DIRECTED SEARCHES FOR BROADBAND EXTENDED GRAVITATIONAL WAVE EMISSION IN NEARBY ENERGETIC CORE-COLLAPSE SUPERNOVAE

Core-collapse supernovae (CC-SNe) are factories of neutron stars and stellar-mass black holes. SNe Ib/c stand out as potentially originating in relatively compact stellar binaries and they have a branching ratio of about 1% into long gamma-ray bursts. The most energetic events probably derive from central engines harboring rapidly rotating black holes, wherein the accretion of fall-back matter down to the innermost stable circular orbit (ISCO) offers a window into broadband extended gravitational wave emission (BEGE). To search for BEGE, we introduce a butterfly filter in time–frequency space by time-sliced matched filtering. To analyze long epochs of data, we propose using coarse-grained searches followed by high-resolution searches on events of interest. We illustrate our proposed coarse-grained search on two weeks of LIGO S6 data prior to SN 2010br (z = 0.002339) using a bank of up to 64,000 templates of one-second duration covering a broad range in chirp frequencies and bandwidth. Correlating events with signal-to-noise ratios > 6 from the LIGO L1 and H1 detectors reduces the total to a few events of interest. Lacking any further properties reflecting a common excitation by broadband gravitational radiation, we disregarded these as spurious. This new pipeline may be used to systematically search for long-duration chirps in nearby CC-SNe from robotic optical transient surveys using embarrassingly parallel computing.

79 ASTRONOMY AND ASTROPHYSICS↗

Beam Splitter Intensities Are Preselected

New beam splitter is a block of optically clear material with two parallel polish faces. Some of area of one surface is coated with totally reflecting layer, which may be metal or dielectric. On opposite surface, a metal coating of stepped thickness offers a different reflectivity at each step. Width and spacing of reflecting zones are chosen to accommodate angle of spacing of incidence of input beam and desired spacing of ouput beams.

Campbell, W.↗

Transport of infrared radiation in cuboidal clouds

The transport of infrared radiation in a single cuboidal cloud using a vertical two steam approximation was modeled. The emittance of the top face of the model cloud is always less than that for a plane parallel cloud of the same optical depth. The hemisphere flux escaping from the cloud top has a gradient from the center to the edges which brighten when the cloud is over warmer ground. Cooling rate calculations in the 8 to 13.6 micrometer region show that there is cooling from the sides of the cloud at all levels even when there is heating of the core from the ground below. The radiances exiting from model cuboidal clouds were computed by path integration over the source function obtained with the two stream approximation. It is suggested that the brightness temperature measured from finite clouds will overestimate the cloud top temperature.

HARSHVARDHAN↗

Transport of infrared radiation in cuboidal clouds

The transport of infrared radiation in a single cuboidal cloud is modeled using a variable azimuth two-stream approximation. Computations are made at 10 microns for a Deirmendjian (1969) C-1 water cloud where the single scattering albedo is equal to 0.638 and the asymmetry parameter is 0.865. The results indicate that the emittance of the top face of the model cloud is always less than that for a plane parallel cloud of the same optical depth. The hemispheric flux escaping from the cloud top possesses a gradient from the center to the edges which are warmer when the cloud is over warmer ground. Cooling rate calculations in the 8-13.6 micron region demonstrate that there is cooling out of the sides of the cloud at all levels even when there is heating of the core from the ground below. The radiances exiting from model cuboidal clouds are computed by path integration over the source function obtained with the two-stream approximation. Results indicate that the brightness temperature measured from finite clouds will overestimate the cloud-top temperature.

Harshvardhan, MR.↗

Solar reflection from interacting and shadowing cloud elements

An attempt is made to relate the reflection from a broken cloud field to that from a plane parallel cloud of the same optical properties by using Monte Carlo simulations for a very simple model of an array of regularly spaced, infinitely long bar clouds. Reflection from the array is represented by an effective cloud fraction, and it is shown that for many cases this may be obtained by treating the cloud elements to be noninteracting azimuthally symmetric reflectors. The effective cloud fraction is a function of solar zenith angle, the aspect ratio of the individual cloud elements, and the normal or zenith cloud fraction of the array. Model computations for reflection from an array of randomly distributed identical cylinders are also presented as an example of a possible application of this technique.

HARSHVARDHAN↗

Performance of a 300 Mbps 1:16 serial/parallel optoelectronic receiver module

Optical interconnects are being considered for the high speed distribution of multiplexed control signals in GaAs monolithic microwave integrated circuit (MMIC) based phased array antennas. The performance of a hybrid GaAs optoelectronic integrated circuit (OEIC) is described, as well as its design and fabrication. The OEIC converts a 16-bit serial optical input to a 16 parallel line electrical output using an on-board 1:16 demultiplexer and operates at data rates as high as 30b Mbps. The performance characteristics and potential applications of the device are presented.

Richard, M. A.↗