Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “O&M”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Carboxylic Group Rotation and Lattice Expansion in a Co 2 (Pyrazine-2,3-Dicarboxylate) 2 (4,4'-Bipyridine) Porous Coordination Polymer Induced by CO 2 Adsorption at Ambient Temperature

Here, a Co 2 (pzdc) 2 (bpy)(H 2 O) m (pzdc: pyrazine-2,3dicarboxylate; bpy: 4,4'-bipyridine) porous coordination polymer (PCP) was studied for CO 2 uptake and concomitant structural changes at ambient temperature. Extended structural characterization included evaluation of lattice parameter changes upon CO 2 adsorption and in situ synchrotron X-ray powder diffraction data. The PCP effective pore size increased by ~2% with gas uptake over the pressure range of 1-50 atm, allowing the adsorption capacity to double. Furthermore, the hysteretic behaviors seen during CO 2 adsorption at moderate pressures are commensurate with the structural changes from synchrotron data. The adsorption and hysteresis occur with rotation of the linking carboxylate groups, and yet only minor changes in unit cell volume (ΔV ≈ 6 Å 3 ) are observed. This contrasts the findings for [Cu 2 (pzdc) 2 (bpy)] n , where a combination of pillar bpy rotations and significant lattice expansion (ΔV ≈ 68 Å(3)) takes place upon hysteretic adsorption of CO 2 . In situ high-temperature X-ray diffraction revealed that the Co(II)-based material has good thermal stability up to ca. 200° C. Finally, the CO 2 uptake also appears to be at a physisorption level, with adsorbent-adsorbate interactions that are ca. 30% stronger than what has been reported for CO 2 adsorption onto [Cu 2 (pzdc) 2 (bpy)] n .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Photodissociation and Theory to Investigate Uranium Oxide Cluster Cations

Uranium oxide cluster cations of the form U n O m + are produced by laser vaporization of a depleted uranium rod in a pulsed supersonic expansion. Ions are mass-analyzed and mass-selected with a time-of-flight spectrometer and studied with UV laser multiphoton dissociation. Cations of the stoichiometry UO 2 (UO 3 ) n + were observed as photofragments from all photodissociated cluster cations. (UO 3 ) n + clusters were also observed to result from dissociation of larger (UO 3 ) n + clusters, with UO 3 neutral as a common leaving group. Electronic structure calculations were used to investigate the stability of the prominent uranium oxide cluster cations using density functional theory (DFT) with the hybrid B3LYP exchange-correlation functional and at the CCSD(T) level and cc-pVnZ-PP basis sets (n = D,T), including diffuse orbitals as computational expense and availability permitted. Clustering energies, relative energies and dissociation energies of the cations are reported. The lowest energy neutral (UO 3 ) n clusters up to n = 3 are rings, n = 4 and 5 are chains with very low energy rings, and n = 6 is 3D. Finally, the lowest energy structures for UO 2 (UO 3 ) n + are composed of uranyl-like UO 2 + units bound by bridging oxygens to other UO 2 2+ units for n = 2 and 3, and for n = 4 a more complex 3D structure is predicted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

How Noninnocent Spectator Species Improve the Oxygen Reduction Activity of Single-Atom Catalysts: Microkinetic Models from First-Principles Calculations

Graphene-based single-atom catalysts are promising alternatives to platinum-based catalysts for fuel cell applications. Different transition metals have been screened using electronic structure methods by estimating onset potentials from the most endergonic elementary reaction step. Here, we calculate onset potentials for the oxygen reduction reaction on metal atoms embedded in N-substituted graphene di-vacancies by virtue of first-principles-informed microkinetic analysis. We find that for more oxophilic metals (Cr, Fe, Mn, and Ru), purely thermodynamic models systematically underestimate onset potentials. Furthermore, the oxophilic metals (Cr, Fe, Mn, and Ru) are oxidized under reaction conditions, leading to an increase in activity compared to their reduced state. Importantly, coadsorbed O m H n species actively participate in the reaction, which requires a dynamic treatment of spectator species. These findings highlight the limitations of thermodynamic analyses for electrocatalytic processes, which commonly assume the same oxidation state for each metal, and show that deviations between computational and experimental onset potentials cannot be solely attributed to the shortcomings of the electronic structure methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Near‐Surface Hydrology and Soil Properties Drive Heterogeneity in Permafrost Distribution, Vegetation Dynamics, and Carbon Cycling in a Sub‐Arctic Watershed

Abstract Discontinuous permafrost environments exhibit strong spatial heterogeneity at scales too small to be driven by weather forcing or captured by Earth System Models. Here we analyze effects of observed spatial heterogeneity in soil and vegetation properties, hydrology, and thermal dynamics on ecosystem carbon dynamics in a watershed on the Seward Peninsula in Alaska. We apply a Morris global sensitivity analysis to a process‐rich, successfully tested terrestrial ecosystem model (TEM), ecosys , varying soil properties, boundary conditions, and weather forcing. We show that landscape heterogeneity strongly impacts soil temperatures and vegetation composition. Snow depth, O‐horizon thickness, and near‐surface water content, which vary at scales of O(m), control the soil thermal regime more than an air temperature gradient corresponding to a 140 km north–south distance. High shrub productivity is simulated only in talik (perennially unfrozen) soils with high nitrogen availability. Through these effects on plant and permafrost dynamics, landscape heterogeneity impacts ecosystem productivity. Simulations with near‐surface taliks have higher microbial respiration (by 78.0 gC m −2 yr −1 ) and higher net primary productivity (by 104.9 gC m −2 yr −1 ) compared to runs with near‐surface permafrost, and simulations with high shrub productivity have outlying values of net carbon uptake. We explored the prediction uncertainty associated with ignoring observed landscape heterogeneity, and found that watershed net carbon uptake is 60% larger when heterogeneity is accounted for. Our results highlight the complexity inherent in discontinuous permafrost environments and demonstrate that missing representation of subgrid heterogeneity in TEMs could bias predictions of high‐latitude carbon budget.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A molecular beam and computational study on the barrierless gas phase formation of (iso)quinoline in low temperature extraterrestrial environments

Despite remarkable progress toward the understanding of the formation pathways leading to polycyclic aromatic hydrocarbons (PAHs) in combustion systems and in deep space, the complex reaction pathways leading to nitrogen-substituted PAHs (NPAHs) at low temperatures of molecular clouds and hydrocarbon-rich, nitrogen-containing atmospheres of planets and their moons like Titan have remained largely obscure. Here, we demonstrate through laboratory experiments and computations that the simplest prototype of NPAHs – quinoline and isoquinoline (C 9 H 7 N) – can be synthesized via rapid and de-facto barrier-less reactions involving o-, m- and p-pyridinyl radicals (C 5 H 4 N˙) with vinylacetylene (C 4 H 4 ) under low-temperature conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

CO 2 -assisted ethane oxidative dehydrogenation over MoO x catalysts supported on reducible CeO 2 –TiO 2

Supported MoO x on mixed CeO 2 –TiO 2 was investigated for the oxidative dehydrogenation of ethane (ODHE) using CO 2 as a mild oxidant. Raman spectroscopic characterization of the synthesized catalysts under dehydrated conditions suggested that surface MoO x species prefer to anchor on the crystalline domains of TiO 2 . Upon increasing the amount of CeO 2 in the mixed oxide support, significant spectral changes were observed, especially in the ~900–950 cm –1 region where Mo–O–M bonds are expected. The catalytic behaviors of Mo as opposed to pure support materials were distinct. As the ceria content in the support increased, MoO x catalysts promoted oxidative dehydrogenation pathways via the Mars–van Krevelen mechanism, while pure supports appeared to favor ethane direct dehydrogenation. Investigation of structure–function relationships via in situ Raman spectroscopic efforts revealed that adding ceria not only changed the redox properties of the support but also improved those of the deposited amorphous MoO x species. We also show that upon incorporation of ceria into the support, CO 2 directly participates in the reoxidation of the dispersed MoO x species during catalysis. Here, this effect was distinct from the participation of CO 2 in the reverse water gas shift reaction. Operando Raman spectra revealed that the presence of CO 2 prolonged the existence of the 930 cm –1 feature which appears to correlate well with the relative contribution of the oxidative versus non-oxidative pathway in ethane dehydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Understanding methanol dissociative adsorption and oxidation on amorphous oxide films

Interactions between a transition metal (oxide) catalyst and a support can tailor the number and nature of active sites, for instance in the methanol oxidation reaction.In this report we use ambient pressure X-ray photoelectron spectroscopy (AP-XPS) to identify and compare the surface adsorbates that form on amorphous metal oxide films that maximize such interactions. Considering Al (1−x) M x O y (M = Fe or Mn) films at a range of methanol : oxygen gas ratios and temperatures, we find that the redox-active transition metal site (characterized by methoxy formation) dominates dissociative methanol adsorption, while basic oxygen sites (characterized by carbonate formation) play a lesser role. Product detection, however, indicates complete oxidation to carbon dioxide and water with partial oxidation products (dimethyl ether) comprising a minor species. Comparing the intensity of methoxy and hydroxyl features at a fixed XPS chemical shift suggests methanol deprotonation during adsorption in oxygen rich conditions for high transition metal content. However, increasing methanol partial pressure and lower metal site density may promote oxygen vacancy formation and the dehydroxylation pathway, supported by a nominal reduction in the oxidation state of iron sites. These findings illustrate that AP-XPS and mass spectrometry together are powerful tools in understanding metal–support interactions, quantifying and probing the nature of catalytic active sites, and considering the link between electronic structure of materials and their catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

WEC fault modelling and condition monitoring: A graph-theoretic approach

The nature of wave resources usually requires wave energy converter (WEC) components to handle peak loads (i.e., torques, forces, and powers) that are many times greater than their average loads, accelerating equipment degradation. Moreover, due to their isolated nature and harsh operating environment, WEC systems are projected to possess high operations and maintenance (O&M) cost, i.e., around 27% of their leveled cost of energy. As such, developing techniques to mitigate these costs through the application of condition monitoring and fault tolerant control will significantly impact the economic feasibility of grid connected WEC power. Toward this goal, models of faulty components are developed in the open source modeling platform, WEC-Sim, to estimate the performance and measurable states of a WEC operating with likely device and sensor failures. Two types of faulty component models are then applied to a point absorber WEC model with basic controller damping and spring forces. Resulting changes in device behavior are recorded as a benchmark, and a graph-theoretic approach is proposed for fault detection and identification utilizing multivariate time series. Simulation results demonstrate that these faults can greatly affect the WEC performance, and that the proposed method can effectively detect and classify different types of faults.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Interstellar gas heating by primordial black holes

Interstellar gas heating is a powerful cosmology-independent observable for exploring the parameter space of primordial black holes (PBHs) formed in the early Universe that could constitute part of the dark matter (DM). We provide a detailed analysis of the various aspects for this observable, such as PBH emission mechanisms. Using observational data from the Leo T dwarf galaxy, we constrain the PBH abundance over a broad mass-range, M PBH ~ O(1)M ⊙ – 10 7 M ⊙ , relevant for the recently detected gravitational wave signals from intermediate-mass BHs. Here, we also consider PBH gas heating of systems with bulk relative velocity with respect to the DM, such as Galactic clouds.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

AGP-based unitary coupled cluster theory for quantum computers

Electronic structure methods typically benefit from symmetry breaking and restoration, specially in the strong correlation regime. Here, the same goes for ansätze on a quantum computer. We develop a unitary coupled cluster method based on the antisymmetrized geminal power (AGP)—a state formally equivalent to the number-projected Bardeen–Cooper–Schrieffer wavefunction. We demonstrate our method for the single-band Fermi–Hubbard Hamiltonian in one and two dimensions. We also explore post-selection as a state preparation step to obtain correlated AGP and prove that it scales no worse than O(√M) in the number of measurements, thereby making it a less expensive alternative to gauge integration to restore particle number symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ultraviolet to far-infrared dielectric function of n -doped cadmium oxide thin films

Spectroscopic ellipsometry and Fourier transform infrared spectroscopy were applied to extract the ultraviolet to far-infrared (150 – 33333 cm -1 ) complex dielectric functions of high-quality, sputtered indium-doped cadmium oxide (In:CdO) thin crystalline films on MgO substrates possessing carrier densities (N d ) ranging from 1.1 x 10 19 cm -1 to 4.1 x 10 20 cm -1 . A multiple oscillator fit model was used to identify and analyze the three major contributors to the dielectric function and their dependence on doping density: interband transitions in the visible, free-carrier excitations (Drude response) in the near- to far-infrared, and IR-active optic phonons in the far-infrared. More specifically, values pertinent to the complex dielectric function such as the optical band gap (E g ), are shown here to be dependent upon carrier density, increasing from approximately 2.5–3 eV, while the high-frequency permittivity (ε ∞ ) decreases from 5.6 to 5.1 with increasing carrier density. The plasma frequency (ω p ) scales as $\sqrt{N_d}$, resulting in ω p values occurring within the mid- to near-IR, and the effective mass (m *) was also observed to exhibit doping density-dependent changes, reaching a minimum of 0.11 m o in unintentionally doped films (1.1 x 10 19 cm -1 ). Good quantitative agreement with prior work on polycrystalline, higher-doped CdO films is also demonstrated, illustrating the generality of the results. The analysis presented here in this paper will aid in predictive calculations for CdO-based next-generation nanophotonic and optoelectronic devices, while also providing an underlying physical description of the key properties dictating the dielectric response in this atypical semiconductor system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Power Electronics Based Self-Monitoring and Diagnosing for Photovoltaics Systems

Self-monitoring and diagnosing technology for photovoltaic (PV) systems is a method to reduce energy production losses. The proposed technology will enable existing panel-level power optimizers and inverters in a PV system to actively perturb the system, measure its response to these small-signal perturbations, and detect any changes in the small-signal impedances. Impedance measurement will be used to identify specific faults and power degradation trends in a PV panel. This information can be used to instantly alert Operations and Maintenance (O&M) personnel of the need for corrective action, thereby reducing energy production losses earlier relative to standard PV systems.

Panchal, Jeet↗
DOE OSTI2024

Review and Gap Analysis of Heliostat Components and Controls

This investigation provides a comprehensive literature review pertaining to heliostat components and controls as part of the U.S. Department of Energy (DOE), Heliostat Consortium (Heliocon) program. Here, this work presents a detailed assessment of subcomponents, controls and wireless communications elements that comprise various designs of helisotats within concentrating solar power (CSP) installations. Additionally, this work also provides the results of an industry survey, intended to compliment the literature discussion, to provide a gap analysis of the primary technology and cost areas that need to be addressed to help improved to spur concentrating solar power (CSP) bankability. Although the results of the study determined several key areas for development, three strategic areas identified were: (1) the use of advanced composite materials to replace a need for expensive steel within the structure and mirror substrate, (2) employment of closed-loop controls for automated calibration, reduction of commissioning time and O&M hours, reduction of drive requirements, as well as overall cost reduction, and (3) the need for more Heliostat-centric codes and standards to facilitate engineering confidence in the development of new features, cost reductions, or other design iterations to be seamlessly introduced without optical performance problems.

14 SOLAR ENERGY↗
DOE OSTI2021

WOMBAT (Windfarm Operations and Maintenance cost-Benefit Analysis Tool) WISDEM® [SWR-21-68]

The windfarm operations and maintenance cost-benefit analysis tool (WOMBAT) is software to simulate the operations and maintenance phase of either onshore or offshore windfarms. WOMBAT is a medium-fidelity tool that is designed to model turbine, cable, and substation failures at the subassembly level, but is flexible enough that individual component or asset-level modeling can also be performed. WOMBAT enables users to model technological improvements, the use of a wide range of service equipment from drone repairs and remote resets to heavy lift vessels and crawler cranes, to analyze cost trends with varying trade-offs in conjunction with energy production, availability and a growing range of metrics. This library provides a tool to simulate the operation and maintenance phase (O&M) of distributed, land-based, and offshore windfarms using a discrete event simulation framework. WOMBAT is written around the SimPy discrete event simulation framework. Additionally, this is supported using a flexible and modular object-oriented code base, which enables the modeling of arbitrarily large (or small) windfarms with as many or as few failure and maintenance tasks that can be encoded. Please note that this is still heavily under development, so you may find some functionality to be incomplete at the current moment, but rest assured the functionality is expanding. With that said, it would be greatly appreciated for issues or PRs to be submitted for any improvements at all, from fixing typos (guaranteed to be a few) to features to testing. Also available at: https://pypi.org/project/wombat/

Cooperman, Aubryn↗
DOE OSTI2025

Microreactor Optimization Using Simulation And Economics (mouse)

Microreactor Optimization Using Simulation and Economics (MOUSE) is a tool that integrates both nuclear microreactor design and reactor economics to provide comprehensive evaluations and optimizations. This tool enables stakeholders to explore the interplay between technical and economic variables, guiding them towards effective and competitive microreactor solutions. For the reactor core simulations, MOUSE leverages the OpenMC Monte Carlo Particle Transport Code to perform detailed core simulations for various microreactor designs. The included OpenMC models are 2D core designs of a Liquid Metal Thermal Microreactor (LMTR), a Gas-Cooled TRISO-Fueled Microreactor (GCMR), and a Heat Pipe Microreactor. Beyond core design, MOUSE includes simplified calculations for: - Calculating the masses of heat exchangers within the system. - Mechanical power of pumps. - Estimating the area occupied by various buildings within the nuclear plant. For the economic analysis, MOUSE provides detailed bottom-up cost estimates, encompassing a wide range of costs including preconstruction costs, direct costs, indirect costs, training costs, financial costs, operation & maintenance (O&M) costs, and fuel costs. These cost estimations are developed using data from the MARVEL project and additional literature sources, enabling the calculation of total capital costs and levelized cost of energy for both first-of-a-kind and nth-of-a-kind microreactors. MOUSE also enables analysis of the cost drivers and competitiveness in the electricity market. MOUSE allows users to modify a wide array of technical and economic parameters to evaluate different scenarios and their impacts. Examples of these parameters include: Fuels, coolants, or reflector materials Enrichment levels Control drum materials and geometry Fuel pin geometry and materials Moderator pin geometry and materials Reactor core and reflector dimensions Packing factor for the TRISO particles Nuclear reactor power and reactor burnup Number of sensors Shielding thickness Reactor vessel and guard vessel dimensions Operational staff requirements Number of emergency shutdowns Levelization period Interest rate Construction duration Since MOUSE is powered by the WATTS toolkit, it supports optimization studies, parametric analyses, and uncertainty calculations/propagation. The optimization techniques enable users to identify optimal design and economic configurations. The parametric analysis tools allow users to explore the sensitivity of various parameters, while uncertainty propagation helps quantify the impact of uncertainties on overall performance and cost. User Interface and Workflow: Currently, MOUSE is a command-line-based tool. Users can input various reactor design or economic parameters, modify the designs, run simulations, and visualize results through comprehensive data visualization and reporting capabilities. The typical workflow involves setting up the reactor model, defining economic parameters, running simulations, and analyzing the results to make informed decisions. By combining advanced design calculations with detailed economic modeling, MOUSE provides a robust framework for optimizing nuclear microreactor technologies, enhancing their competitiveness, and guiding stakeholders towards innovative and cost-effective solutions.

Hanna, Botros [Idaho National Laboratory (INL), Id↗
DOE OSTI2021

PHYSICS-BASED AUTOMATED REASONING FOR HEALTH MONITORING: SENSOR SET SELECTION

This paper addresses the problem of how to select a sensor set for equipment health monitoring that meets the needs of advanced O&M tasks that target cost reduction. They include maintenance optimization and asset management for the existing fleet and near-autonomous operation as currently envisioned for advanced reactors. The method uses physics-based automated reasoning to provide for a more “explainable” diagnosis. The algorithm is described along with its implementation on a computational cluster. Preliminary results for application to a use case in the current fleet are described.

diagnosis↗
DOE OSTI2024

Pilgrim Hot Springs: GEOPHIRES Inputs and Outputs for Direct-Use Geothermal District Heating and Cooling

This dataset includes files for a techno-economic analysis conducted using the GEOPHIRES simulator to examine the feasibility of expanding a larger district heating site in a remote location: Pilgrim Hot Springs, Alaska. Files included here are GEOPHIRES inputs and outputs for five different scenarios with varying demand, cycle, and system design characteristics to analyze. Also included is the link to the GEOPHIRES GitHub, as well as a link to the dataset that contains the energy modelling used to determine the heating demand for the district. For a list of the differences between scenarios, see the included "Input Overview.txt" file. Fields included in the input files are: subsurface technical parameters, surface technical parameters, financial parameters, capital and O&M parameters, as well as simulation parameters. The output files are case reports that summarize all equipment, reservoir characteristics, costs, and heating profiles.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

pvOps: a Python package for empirical analysis of photovoltaic field data

The purpose of pvOps is to support empirical evaluations of data collected in the field related to the operations and maintenance (O&M) of photovoltaic (PV) power plants. pvOps presently contains modules that address the diversity of field data, including text-based maintenance logs, current-voltage (IV) curves, and timeseries of production information. The package functions leverage machine learning, visualization, and other techniques to enable cleaning, processing, and fusion of these datasets. These capabilities are intended to facilitate easier evaluation of field patterns and extraction of relevant insights to support reliability-related decision-making for PV sites. The open-source code, examples, and instructions for installing the package through PyPI can be accessed through the GitHub repository.

14 SOLAR ENERGY↗