Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Next generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Tailoring composition and deformation modes at the microstructural level for next generation low-cost high-strength austenitic stainless steels

The objective of this project is to enable deliberate development of cost-effective, hydrogen resistant alloys by establishing detailed relationships specific to the effects of alloy composition, short-range order (SRO), and microsegregation in the presence of hydrogen on the transition between homogeneous deformation and localized plasticity in shear bands. In collaboration with the International Institute for Carbon-Neutral Energy Research, I2CNER, at Kyushu University in Japan, we conceptualized, designed, and manufactured four austenitic alloys that maintain corrosion resistance and ensure lower cost relative to baseline commercial alloys. The mechanical properties and deformation modes of the novel alloys (KU alloys) were assessed in the presence of hydrogen (H). Correlations between composition and performance revealed that two of the KU alloys are suitable replacements for 316 steel, while another is a viable replacement for 304 steel at room temperature. We found that, in the presence of other austenite stabilizing elements namely Mn and N, replacing Ni with Cu does not lead to martensite formation as has been previously reported.1–3 Furthermore, we found that the addition of Cu leads to an earlier onset of multiple slip resulting in an relative earlier onset of a higher work hardening rate (WHR). Greater understanding of the relationships between alloy composition and SRO required the development of a novel advanced electron diffraction methodology to characterize SRO in complex FCC alloys. This innovative approach, which combines fluctuation and correlation analyses of diffuse-scattering signals, successfully differentiated between SRO and long-range ordering (LRO). Further investigations into annealed austenitic stainless steels could provide insights into manipulating SRO and its effects on material properties. Atomistic simulations provided understanding of SRO behavior that was difficult to capture experimentally. This project created the first spin cluster expansion model that is able to capture and describe SRO effects in Fe-Ni-Cr FCC alloys, accounting for the non-negligible effects of magnetism. An automated computational workflow was established to provide reliable predictions of SRO in Fe-Ni-Cr austenitic alloys, both with and without the presence of H atoms. Analysis of the propensity for SRO in Fe-Ni-Cr alloys revealed that H tends to cluster with specific, well-defined SRO domains. The computational framework is general purpose and can be extended to realistic stainless steels across diverse composition ranges. With confidence that SRO is possible in austenitic stainless steels, we developed a discrete dislocation finite element code to understand the interaction of dislocations with SRO in the presence of H. By incorporating H effects on the dislocation emission and SRO stress field we show that the critical stress for the dislocation pileup to breakthrough the SRO domain decreases in the presence of H, which directly contributes localized deformation at the macroscale. Through the simulation of a uniaxial tension test, we demonstrated that H-induced weakening of SRO stress field and H-enhanced dislocation emission can lead to the onset of shear localization at lower macroscopic strains. As a whole, this project identified three novel alloys that show improvements in performance and cost efficiency for H-facing applications by studying correlations between alloy chemistry and deformation behavior. We also made significant advancements to experimental and computational methodologies necessary to study the chemistry and distribution of SRO across a range of alloys, which in turn allowed us to demonstrate how deformation mechanisms change due to the contributions of SRO in austenitic alloys in the presence of H. The combined advancements in fundamental understanding with novel alloy development in this project has increased the viability of next generation H-technologies for the broader public through accessible low-cost alloys and accelerated development towards future H-infrastructure.

08 HYDROGEN↗
DOE OSTI2024

Towards a fiber barrel detector for next-generation high-pressure gaseous xenon TPCs

Abstract The NEXT (Neutrino Experiment with a Xenon TPC) project is an international collaboration aimed at finding evidence of neutrinoless double beta decay using gaseous xenon. The current phase of the project involves the construction and operation of NEXT-100, which is designed to hold 100 kg of xenon at 15 bar and is expected to start commissioning in the first quarter of 2024. NEXT-HD will be a tonne scale experiment following NEXT-100 and will incorporate a symmetric design, with one cathode and two anodes. For this detector, the collaboration is considering to implement a barrel of wavelength-shifting fibers read-out by silicon photomultipliers to measure the energy of the particles interacting in the gaseous xenon. In this document, we will discuss the characteristics of this approach and provide an update on the related R&D efforts.

Instruments & Instrumentation↗
DOE OSTI2021

SNEWS 2.0: a next-generation supernova early warning system for multi-messenger astronomy

The next core-collapse supernova in the Milky Way or its satellites will represent a once-in-a-generation opportunity to obtain detailed information about the explosion of a star and provide significant scientific insight for a variety of fields because of the extreme conditions found within. Supernovae in our galaxy are not only rare on a human timescale but also happen at unscheduled times, so it is crucial to be ready and use all available instruments to capture all possible information from the event. The first indication of a potential stellar explosion will be the arrival of a bright burst of neutrinos. Its observation by multiple detectors worldwide can provide an early warning for the subsequent electromagnetic fireworks, as well as signal to other detectors with significant backgrounds so they can store their recent data. The supernova early warning system (SNEWS) has been operating as a simple coincidence between neutrino experiments in automated mode since 2005. In the current era of multi-messenger astronomy there are new opportunities for SNEWS to optimize sensitivity to science from the next galactic supernova beyond the simple early alert. This document is the product of a workshop in June 2019 towards design of SNEWS 2.0, an upgraded SNEWS with enhanced capabilities exploiting the unique advantages of prompt neutrino detection to maximize the science gained from such a valuable event.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Next Generation Neutrino Oscillation Experiments: Challenges, Opportunities and New Physics

In the next 5+ years, three new neutrino oscillation experiments with be operating: JUNO, HyperK and DUNE. These three complementary experiments will expore the neutrino sector with unprecedented precision and detail. Most likely, neutrinos do not get their masses via the vanilla Higg's mechanism as for all other fermions, thus it is imperative that the neutrino sector be explored with similar precision as the quark sector. This talk will highlight the Challenges, Opportunities and Searches for Additional New Physics in these three experiments.

Parke, Stephen [Fermilab] (ORCID:0000000320286782)↗
DOE OSTI2020

Next-generation geospatial-temporal information technologies for disaster management

Traditional geographic information systems (GIS) have been disrupted by the emergence of Big Data in the form of geo-coded raster, vector, and time-series Internet-of-Things data. This article discusses the application of new scalable technologies that go far beyond relational databases and file-based storage on spinning disk or tape to incorporate both storage and processing data in the same platform. The roles of the Apache Hadoop Distributed File Systems and NoSQL key-value stores such as the Apache Hbase are discussed, along with indexing schemes that optimally support geospatial-temporal use. Here, we highlight how this new approach can rapidly search multiple GIS data layers to obtain insights in the context of early warning, impact evaluation, response, and recovery to earthquake and wildfire disasters.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Next-Generation Cobalt-Free Cathodes – A Prospective Solution to the Battery Industry's Cobalt Problem

Lithium-ion batteries are overreliant on cobalt containing cathodes. Current projections estimate that hundreds of millions of electric vehicles (EVs) will be on the road by 2050, and this ever-growing demand threatens to deplete global cobalt reserves at an alarming rate. Moreover, cobalt supply chain issues have significantly increased cobalt prices throughout the last decade. As such, energy storage research and development need to reduce the reliance on cobalt to meet ever-growing demand for lithium-ion batteries. The present review summarizes the science and technology gaps and potential of numerous cobalt-free Li-ion cathodes including layered, spinel, olivine, and disordered rock-salt systems. Despite the promising performance of these Co-free cathodes, scale-up and manufacturing bottlenecks associated with these materials must also be addressed to enable widespread adoption in commercial batteries. Overall, this review broadly highlights the enormous promise of “zero-cobalt” Li-ion batteries to enable sustainable production of EVs in the coming decades.

25 ENERGY STORAGE↗
DOE OSTI2021

Integrated TBC/EBC for SiC Fiber Reinforced SiC Matrix Composites for Next Generation Gas Turbines (Final Report)

In this ambitious project, a significant challenge preventing widespread use of ceramic matrix composites in hot section components of gas power generating turbines was addressed. Hot section components made from SiC fiber reinforced SiC matrix composites (SiC/SiC composites), have the potential to achieve a combined cycle energy efficiency of above 65%. To achieve this efficiency, the temperature of the combustion gases on the turbine component surface is expected to reach as high as ~1700ºC (3100ºF). However, SiC/SiC composites suffer from volatilization at high temperature under high velocity steam environment – typical in a turbine hot chamber. This integrated collaborative project, between two research groups at Clemson University and a team of engineers and scientists at GE Gas Power, focused on design, fabrication and evaluation of a new graded environmental barrier coating. Using the excellent compositional tailorability of polymer derived ceramics (PDCs), we developed an integrated EBC/BC that smoothly transitions from bottom SiC/SiC bond interface to hermetic sesquioxide (Y 2 O 3 ) top surface. This smooth compositional transition avoided the sharp CTE mismatch at interfaces to greatly reduce the thermal stress. The developed EBC is compatible with and bonds well with the bond coat that GE uses. The top hermetic oxide surface ensures low oxygen transportation and volatilization rates under the high velocity steam environment. The graded microstructure with increasing sesquioxide concentration also decreases the amount of Si and C elements near the top hermetic sesquioxide layer. Coatings made using a process suitable for manufacturing – atmospheric plasma spraying was demonstrated. The microstructure of coatings made using this process were fully characterized. Finally, the performance of these coatings was investigated under the most demanding conditions for this application. Specifically, high temperature, high velocity steam exposure; thermal shock test; and thermal cycling tests. The graded coatings performed exceptionally well in all these tests. Specific suggestions for future development in this area have also been identified. In addition to the excellent technical progress, this project helped initiate a robust collaboration between the research groups at Clemson and GE Gas Power. It also provided a high-quality learning and mentoring opportunity for the three post-doctoral research associates and two UG students at Clemson University who worked on this project. All proposed tasks, sub-tasks were completed, and all milestones achieved.

03 NATURAL GAS↗
DOE OSTI2022

SALT3-NIR: Taking the Open-source Type Ia Supernova Model to Longer Wavelengths for Next-generation Cosmological Measurements

Abstract A large fraction of Type Ia supernova (SN Ia) observations over the next decade will be in the near-infrared (NIR), at wavelengths beyond the reach of the current standard light-curve model for SN Ia cosmology, SALT3 (∼2800–8700 Å central filter wavelength). To harness this new SN Ia sample and reduce future light-curve standardization systematic uncertainties, we train SALT3 at NIR wavelengths (SALT3-NIR) up to 2 μ m with the open-source model-training software SALTshaker , which can easily accommodate future observations. Using simulated data, we show that the training process constrains the NIR model to ∼2%–3% across the phase range (−20 to 50 days). We find that Hubble residual (HR) scatter is smaller using the NIR alone or optical+NIR compared to optical alone, by up to ∼30% depending on filter choice (95% confidence). There is significant correlation between NIR light-curve stretch measurements and luminosity, with stretch and color corrections often improving HR scatter by up to ∼20%. For SN Ia observations expected from the Roman Space Telescope, SALT3-NIR increases the amount of usable data in the SALT framework by ∼20% at redshift z ≲ 0.4 and by ∼50% at z ≲ 0.15. The SALT3-NIR model is part of the open-source SNCosmo and SNANA SN Ia cosmology packages.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Enabling the Next Generation Of Facilities for Particle Physics

The report of the decadal US Particle Physics Community Planning Exercise known as “Snowmass” was released earlier this year. The Snowmass report serves as input for the second phase of planning, the Particle Physics Project Prioritization Panel (P5). P5 will develop a strategic plan for U.S. particle physics that will guide the field for the next decade and set R&D priorities beyond that. A broad range of proposals for future facilities were put forward during the Snowmass process, many requiring beyond state-of-the-art superconducting materials and magnets. This talk will give an overview of some of the collider options and outline elements of an R&D plan for the material and magnet development needed to meet the challenging requirements.

Gourlay, Steve↗
DOE OSTI2024

Training the next generation of researchers in exploring cloud dynamics and microphysics using millimeter-wavelength radars

Millimeter-wavelength radars, with their ability to collect observations and high spatiotemporal resolution, have become cornerstone instruments for investigating cloud and precipitation microphysics and dynamics in the last two decades. Since the1990s the US Department of Energy Atmospheric Radiation Measurement (ARM) program has invested in mm-wavelength radar technology progressively adding scanning capability, additional frequencies and polarimetric capability. In addition, atmospheric observatories including those technologies have been operated overseas. Those technologies have enhanced our understanding of cloud and precipitation processes. Only a few universities operate those instruments and use them for educational purposes. The central role of mm- wavelength radars and their role will be further highlighted in the next decade. NASA and other international space agencies are planning to launch millimeter-wavelength (i.e., Ku, Ka, W, G- bands) Doppler radar in space to improve our understanding of cloud and precipitation formation, evolution and their impacts on global climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Next Generation Ta-STJ Sensor Arrays for BSM Physics Searches

The Beryllium Electron capture in Superconducting Tunnel junctions (BeEST) experiment uses superconducting tunnel junction (STJ) sensors to search for physics beyond the standard model (BSM) with recoil spectroscopy of the 7 Be EC decay into 7 Li. A pulsed UV laser is used to calibrate the STJs throughout the experiment with ∼20 meV precision. Phase-III of the BeEST experiment revealed a systematic calibration discrepancy between STJs. We found these artifacts to be caused by resistive crosstalk and by intensity variations of the calibration laser. For phase-IV of the BeEST experiment, we have removed the crosstalk by designing the STJ array so that each pixel has its own ground wire. We now also use a more stable UV laser for calibration. The new STJ arrays were fabricated at STAR Cryoelectronics and tested at LLNL and FRIB. They have the same high energy resolution of ∼1-2~eV in the energy range of interest below 100~eV as before, and they no longer exhibit the earlier calibration artifacts. We discuss the design changes and the STJ array performance for the next phase of the BeEST experiment.

Laser Calibration↗
DOE OSTI2023

Next-Generation Marine Energy Software Needs Assessment

Over the past decade the marine energy industry has continued to grow and evolve, with new concepts and technologies constantly being pursued. Additionally, the field of computing is vastly different today than it was five or ten years ago. By utilizing advanced software and hardware architectures, like graphics processing units as well as parallelization and high-performance computing resources, software can produce higher quality outputs and a higher volume of outputs. These software and hardware resources can enable the marine energy community to exploit computational advancements from other research fields, which can include machine learning, differentiable programming, and controls co-design. Better integration of existing software and development of potential new software is necessary to take advantage of trends in modern computing and respond to the current and future needs of the marine energy community. In order to better understand the existing marine energy software landscape and industry needs, DOE's Water Power Technologies Office (WPTO) tasked Sandia National Laboratories and the National Renewable Energy Laboratory to update the needs assessment by identifying existing software gaps and software needs, and assisting WPTO in planning the next wave of marine energy software development. The proposed effort involved cataloguing and analyzing the available data on existing software related to marine energy. The marine energy software landscape has vastly changed in the last ten years. There are now nearly 230 different software packages utilized by the marine energy sector, compared to a decade ago when the Cardinal Engineering survey identified approximately 40 software packages. In 2012, the marine energy software landscape was captured in two tables, whereas the current marine energy software landscape required development of a software database to collect and categorize software.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Bipolar Electrodes for Next‐Generation Rechargeable Batteries

Abstract The development of advanced rechargeable batteries provides a great opportunity for basic and applied researchers to collectively overcome challenging scientific and technological barriers that directly address a critical need for energy storage. In addition to novel battery chemistries often scientifically reviewed, advanced battery structures via technological innovations that boost battery performance are also worthy of attention. In this context, bipolar electrodes (BEs) are capable of improving the specific power, simplifying cell components, and reducing manufacturing costs for rechargeable batteries. By focusing on the fundamentals and applications of BEs in rechargeable batteries, the rational utilization of BEs from an academic perspective is considered. The progress and challenges of BEs are discussed and summarized in detail. Key techniques and materials for enabling BEs are highlighted and an outlook for the future directions of BEs that involve emerging concepts, such as wearable devices, all‐solid‐state batteries, fast spraying fabrication, and recyclable secondary batteries, is also presented.

25 ENERGY STORAGE↗