Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Near-IR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

The distribution of olivine in the crater Copernicus

Multispectral imaging in the visible and near-IR at four wavelengths (0.73, 0.96, 1.45, and 1.99 micron) of Copernicus crater has been used to map the distribution of olivine-rich, pyroxene-poor material known previously to occur in the central peak complex. Three additional portions of the crater exhibit spectral characteristics similar to those of the central peaks, strongly suggesting the presence of material similar to that exposed in the central peaks. These areas are a scarp forming a portion of the northern rim of Copernicus, and two slump blocks in the north wall which may have been derived from the same portion of the ejecta now exposed in the rim scarp. These occurrences decrease the minimum allowable depth for this unusual material in the Copernicus target site though still represent some of the deepest material exposed by Copernicus.

Lucey, Paul G.↗

A reevaluation of spectral ratios for lunar mare TiO2 mapping

The empirical relation established by Charette et al. (1974) between the 400/560-nm spectral ratio of mature mare soils and weight percent TiO2 has been used extensively to map titanium content in the lunar maria. Relative reflectance spectra of mare regions show that a reference wavelength further into the near-IR, e.g., above 700 nm, could be used in place of the 560-nm band to provide greater contrast (a greater range of ratio values) and hence a more sensitive indicator of titanium content. An analysis of 400/730-nm ratio values derived from both laboratory and telescopic relative reflectance spectra suggests that this ratio provides greater sensitivity to TiO2 content than the 400/560-nm ratio. The increased range of ratio values is manifested in higher contrast 400/730-nm ratio images compared to 400/560-nm ratio images. This potential improvement in sensivity encourages a reevaluation of the original Charette et al. (1974) relation using the 400/730-nm ratio.

Johnson, Jeffrey R.↗

Titan's surface and troposphere, investigated with ground-based, near-infrared observations

Characterizations are presently made of Titan's haze, cloud, surface albedo, and atmospheric H2 abundance on the bases of 4000-5000/cm near-IR spectrum and points from the Fink and Larson (1979) 4000-12,500/cm spectrum. The strength of solar radiation absorption varies significantly with wavelength, facilitating a probing of the various atmospheric levels down to the surface. The present observations suggest the existence of an optically thin CH4 cloud layer, as well as haze and cloud optical depths sufficiently small for surface sensing at 4900, 6250, and 7700/cm. The albedos at these wavenumbers indicate the dominant surface material to be 'dirty' water ice.

Griffith, Caitlin A.↗

A comparison of surface biophysical properties and remotely sensed variables from FIFE

A method for calculating surface energy balances is investigated which incorporates the vegetation index and/or other indicators of surface conductance at visible and near-IR channels. Data from the Konza Prairie are employed to confirm the hypothesized relationship between maximum canopy conductance and the observed simple-ratio vegetation index. The relationship is established, but more data regarding soil-surface contributions are required to estimate the total surface conductance to evapotranspiration.

Sellers, Piers↗

Non-LTE models of Titan's upper atmosphere

Models for the thermal structure of Titan's upper atmosphere, between 0.1 mbar and 0.01 nbar are presented. The calculations include non-LTE heating/cooling in the rotation-vibration bands of CH4, C2H2, and C2H6, absorption of solar IR radiation in the near-IR bands of CH4 and subsequent cascading to the nu-4 band of CH4, absorption of solar EUV and UV radiation, thermal conduction and cooling by HCN rotational lines. Unlike earlier models, the calculated exospheric temperature agrees well with observations, because of the importance of HCN cooling. The calculations predict a well-developed mesopause with a temperature of 135-140 K at an altitude of approximately 600 km and pressure of about 0.1 microbar. The mesopause is at a higher pressure than predicted by earlier calculations because non-LTE radiative transfer in the rotation-vibration bands of CH4, C2H2, and C2H6 is treated in an accurate manner. The accuracy of the LTE approximation for source functions and heating rates is discussed.

Yelle, Roger V.↗

Radiometric rectification - Toward a common radiometric response among multidate, multisensor images

A method is developed for relating scene digital counts among several images of the same scene by identifying radiometric control sets with mean reflectances that are basically constant. The average digital-count values of the control sets are utilized to compute linear transforms that relate digital count values between images. Two Landsat TM images are studied by means of the technique using simulations of a wide range of atmospheric conditions. In the visible and near-IR bands the algorithm effectively adjusts the surface reflectance for the effects of relative atmospheric differences to within 1 percent. The proposed method is found to be an effective relative correction procedure that can be used when atmospheric optical-depth data and calibration coefficients are not available.

Hall, F. G.↗

A filter for deep near-infrared imaging

The K passband (central wavelength 2.2 microns, FWHM 0.4 micron) is the longest wavelength standard near-IR passband through which deep ground-based imaging is possible. Thermal emission from telescope, instrument, and sky limits the depth to which such imaging can reach by producing strongly temperature-dependent backgrounds in the range 11-13.5 mag/sq arcsec. This paper describes how a passband, which is denoted as K-prime, located slightly shortward of the standard K passband (central wavelength 2.1 microns), yet still within the same atmospheric window, leads to a significantly lower thermal component of the background, reducing the background surface brightness by up to 0.9 mag sq arcsec, and thereby allowing deeper imaging to be obtained in the same integration time. The photometric differences between the K-prime filter and the standard K filter are discussed.

Wainscoat, Richard J.↗

Identification of dislocation etch pits in n-type GaAs by NIR transmission microscopy

An optical method is described for identifying dislocation etch pits in n-type GaAS, using near-IR brightfield transmission microscopy. Dislocations are revealed in a nondestructive manner through contrasts that are likely due to impurity decoration of the dislocation lines. By subjecting the same wafers to a photoetching technique, it was established that each etch pit on the surface is associated with a dislocation and that the termination of each (decorated) dislocation is an etch pit.

Cao, X. Z.↗

Remote sensing of surface hemispherical reflectance (albedo) using pointable multispectral imaging spectroradiometers

Remote techniques for determining albedo are examined in terms of the range of view angles required in the use of string techniques with the Moderate Resolution Imaging Spectroradiometer (MODIS) and the High Resolution Imaging Spectroradiometer (HIRIS). Ground data are used to compute full and half strings out to 15, 30, 45, and 60 degrees for various sun angles and ground cover types. A knowledge-based system is employed to evaluate both the visible and near-IR bands, and the results indicate errors of up to 7 percent for the MODIS data, HIRIS data, and the full-string +/- 60 degrees. In the cases of large extrapolations greater ranges of error are noted indicating that 60-deg systems are most effective. The error is increased in the case of sensor systems that only view in the fore or aft direction, and the MODIS full string for +/- 45 deg is also considered a good system.

Kimes, D. S.↗

Reflectance spectroscopy of fresh whole leaves for the estimation of chemical concentration

Remotely sensed plant-canopy data in the visible and near-IR ranges are used to establish relations between the canopy reflectance and the chemical content of the leaves. The mathematical relation is generated by means of stepwise regression based on the derivative reflectance at certain wavelengths. Fourier filtering and sample control are used to minimize instrument noise and spectral overlap respectively, and absorption features are noted that correspond to sugar and protein. The coefficients of determination between estimated and measured concentrations are at least 0.82 for such substances as starch and chlorophyll. It is recommended in the analysis of remotly sensed canopy data that the chemicals with strong spectral overlaps with the chemical of interest be accounted for in order to estimate foliar chemical concentrations accurately.

Curran, Paul J.↗

Quantitative analysis of the effects of vertical magnetic fields on microsegregation in Te-doped LEC GaAs

Using near-IR transmission microscopy with computational absorption analysis, the effects of axial magnetic fields on micro- and macrosegregation during LP-LEC growth of GaAs were quantitatively investigated with a spatial resolution approaching 2 microns. Segregation inhomogeneities exceeding one order of magnitude are found to be related to fluid dynamics of the melt. The applicability of the BPS theory as well as the nonapplicability of the Cochran analysis are established.

Carlson, D. J.↗

High resolution observations of the 2.125-micron feature in Io's spectrum during 1975 and 1976

High resolution observations of a weak absorption feature in the Io spectrum, obtained in 1975-1976 indicate that, if this feature is indicative of the presence of a new class of material, it may be the only diagnostic feature in Io's near-IR spectrum that can be distinguished by terrestrial telescopes. It appears unlikely that the absorber is a gas, or that gaseous CO2 contributes to the line shape.

Larson, Harold P.↗

Reflectance of snow as measured in situ and from space in sub-arctic areas in Canada and Alaska

An effort is made to measure snow reflectance under different snow and surface conditions, as well as to improve current capabilities for measuring snow reflectance over large regions of space, on the basis of visible and near-IR measurements of clean and dirty snow near Yellowknife, Canada, using both a portable spectrometer and the Landsat TM. Similar measurements were acquired over snow-covered glaciers in Alaska. Visible reflectance of the dirty snow was 30 percent lower than for cleaner snow; the shapes of the reflectance curves were also flatter for the dirty snow. The shape of the reflectance curves and the anisotropic reflectance properties are more useful in differentiating snow type and moisture type than actual reflectances.

Hall, D. K.↗

Imaging spectroscopy of Mars during 1990

Preliminary results are presented of observations of Mars using three telescopes and a CCD camera, grating-array spectrometers, and a near-IR array camera. Martian albedo features are shown to be similar in the visible and 1.3-3.5-micron range, and reflectances of nearly zero are noted in the image at 3.02 microns. The results demonstrate that these techniques provide effective maps of spatial variations in spectral absorption features caused by Martian atmospheric volatiles and by surface minerals.

Bell, James F., III↗

IRAS observations of young stellar objects in the Corona Australis dark cloud

The young stellar object (YSO) population associated with the dark cloud complex in Corona Australis is studied by synthesizing IRAS data with newly obtained near-IR and mid-IR photometry and previously published optical/IR data. Twenty-four YSOs in the Cr A complex are identified. The observed range of spectral energy distribution shapes and bolometric luminosities are consistent with those observed in other dark clouds. The duration and efficiency of star formation are found to be similar to the Rho Ophiuchi IR cluster. The low number of YSOs compared to other dark clouds is understood by a reevaluation of the molecular mass of the R Cr A cloud which shows it to be much less massive than previously assumed.

Wilking, Bruce A.↗

Scattering of infrared radiation by dust in NGC 7023 and NGC 2023

The contribution of scattered light to the total nebular emission is determined on the basis of linear polarization measurements at 1.25, 1.65, and 2.2 microns of the visual reflection nebulae NGC 7023 and NGC 2023. The percentage polarization of NGC 7023 slowly increases from 0.3 to 1 micron, with peak polarizations of up to 26 percent at 1.25 micron, then rapidly decreases, with values of 4-7 percent at 2.2 microns. This is interpreted as implying that scattered starlight contributes most to the SW emission, while unpolarized emission from small grains or large molecules dominates at longer wavelengths. IR polarization and surface brightness measurements are combined to derive the intensity of scattered light, which is then compared with scattering models. While the near-IR emission of both NGC 2023 and NGC 7023 is dominated by small-grain or large-molecule emission, IR scattered light plays a larger role in NGC 2023 than in NGC 7023.

Sellgren, K.↗

Integration of optical and microwave images for geologic mapping and resource explorations

Multispectral images in the visible, near-IR, short-wave IR, thermal IR, and microwave regions, obtained during the Geologic Remote Sensing Field Experiment were combined with data from Landsat TM, laboratory, and field spectral measurements, as well as traditional geologic mapping and were used to produce thematic image maps showing details of the surface geology for an area at the north end of Death Valley (California/Nevada). The integrated multispectral images provide new geologic information which can be used in mineral deposit models to provide exploration targets. The data demonstrated the relationship between the surface composition of materials and remote sensing in the visible and infrared.

Kruse, Fred A.↗

Fiber optic and laser sensors IX; Proceedings of the Meeting, Boston, MA, Sept. 3-5, 1991

The present volume on fiber-optic and laser sensors discusses industrial applications of fiber-optic sensors, fiber-optic temperature sensors, fiber-optic current sensors, fiber-optic pressure/displacement/vibration sensors, and generic fiber-optic systems. Attention is given to a fiber-sensor design for turbine engines, fiber-optic remote Fourier transform IR spectroscopy, near-IR fiber-optic temperature sensors, and an intensity-type fiber-optic electric current sensor. Topics addressed include fiber-optic magnetic field sensors based on the Faraday effect in new materials, diaphragm size and sensitivity for fiber-optic pressure sensors, a microbend pressure sensor for high-temperature environments, and linear position sensing by light exchange between two lossy waveguides. Also discussed are two-mode elliptical-core fiber sensors for measurement of strain and temperature, a fiber-optic interferometric X-ray dosimeter, fiber-optic interferometric sensors using multimode fibers, and optical fiber sensing of corona discharges.

Depaula, Ramon P.↗