Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nano structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Application and Development of Atomic Layer Deposition Techniques to Improve Thermo-Optical Coatings for Spacecraft Thermal Control and Advanced Optical Instruments

A key technology development driver in environmental control systems and next generation optics are discussed utilizing thin film development borrowed from the semiconductor industry. The optical and physical properties of spacecraft radiator coatings are dictated by orbital environmental conditions. For example, coatings must adequately dissipate charge buildup when orbital conditions, such as polar, geostationary or gravity neutral, result in surface charging. Current dissipation techniques include depositing a layer of ITO (indium tin oxide) on the radiator surface in a high temperature process. The application of these enhanced coatings must be such that the properties in question are tailored to mission-specific requirements. The multi-billion-dollar semiconductor industry has adopted Atomic Layer Deposition (ALD) for self-assembly and atomic-scale placement. ALD is a cost-effective nanoadditive-manufacturing technique that allows for the conformal coating of substrates with atomic control in a benign temperature and pressure environment. By using ALD, modification of these coatings can be accomplished during coating application preprocessing. The preprocessing is rendered directly on the coating dry pigment before binding. Through the introduction of paired precursor gases, thin films can be deposited on a myriad of substrates ranging from glass, polymers, aerogels, metals, powders, and other high aspect-ratio micro- and nano- structures. By providing atomic-level control, where single layers of atoms can be deposited, the fabrication of metal transparent films, precise nano-laminates, and coatings of nano-channels and pores is achievable. A method has been demonstrated for the ALD of In2O3 and films on a variety of substrates from Si(100) wafers, glass slides, and on Z93P pigments resulting in a direct spaceflight application. Results will be presented that verify the chemical composition of ALD pigments and charge dissipation properties when the pigment goes through its binding and coating process and we present early results of ALD for carbon nanotube formation and encapsulation.

Dwivedi, Vivek H.↗

Characterisation of synthesised nickel and cobalt nanoscale oxides

The special features of nano-structured materials have been motivating the search for new synthesis methods for these types of materials. This paper is primarily focused on the characterisation of nickel and cobalt nanoscale oxides synthesised by a method based on the dehydration of their respective metal nitrate solutions. This chemical-based synthesis route is briefly described, and basic thermodynamic arguments are presented to theoretically support the feasibility of obtaining such oxides. In addition, a very homogeneous co-formed Ni and Co oxide compound was obtained by dehydrating a water-based solution of both nitrates. Characterisation was done with by X-ray diffraction and transmission electron microscopy, which revealed, respectively, the presence of oxides and their nanoscale structures, including particle morphology and size distribution. High-resolution electron microscopy (HREM) images indicated that the average particle sizes of the obtained NiO and Co{sub 3}O{sub 4} obtained were approximately 20 nm and 40 nm, respectively. In addition, some particles presented crystalline defects in their inner structure, although those smaller than 5 nm seemed to be defect-free and were spherical or faceted. In addition to being characterised as nano-particle-bearing materials, the co-formed oxides can also be used as the starting material for alloys and nano-composites preparations if they are submitted to complete or partial reduction, respectively. - Highlights: Black-Right-Pointing-Pointer The feasibility in obtaining Ni and Co and their co-formed oxides was evaluated. Black-Right-Pointing-Pointer Ni, Co and Ni and Co co-formed nanostructured oxides were synthesised by the route. Black-Right-Pointing-Pointer XRD, TEM and HREM techniques were used to characterise the obtained nanostructures. Black-Right-Pointing-Pointer The particles sizes of the obtained nanostructures were about 20 nm and 40 nm. Black-Right-Pointing-Pointer The particles smaller than 5 nm were spherical/faceted and seems to be defect-free.

36 MATERIALS SCIENCE↗

Direct periodic patterning of GaN-based light-emitting diodes by three-beam interference laser ablation

We report on the direct patterning of two-dimensional periodic structures in GaN-based light-emitting diodes (LEDs) through laser interference ablation for the fast and reliable fabrication of periodic micro- and nano-structures aimed at enhancing light output. Holes arranged in a two-dimensional hexagonal lattice array having an opening size of 500 nm, depth of 50 nm, and a periodicity of 1 μm were directly formed by three-beam laser interference without photolithography or electron-beam lithography processes. The laser-patterned LEDs exhibit an enhancement in light output power of 20% compared to conventional LEDs having a flat top surface without degradation of electrical and optical properties of the top p-GaN layer and the active region, respectively.

36 MATERIALS SCIENCE↗

Magneto-optical magnetometry of individual 30 nm cobalt nanowires grown by electron beam induced deposition

We show that magnetometry measurements based upon the magneto-optical Kerr effect and high resolution optical microscopy can be used as a noninvasive probe of magnetization reversal for individual nano-structures. Our measurements demonstrate single pass hysteresis loop measurements for sample sizes down to 30 nm width. A quantitative signal-to-noise ratio evaluation shows that our approach achieves an at least 3-fold improvement in sensitivity if compared to focused laser based nano-magnetometry. An analysis of the physical limits of our detection scheme enables us to estimate that measurements for structures with single digit nm widths and magnetic moments of 10{sup -16} Am{sup 2} are feasible.

36 MATERIALS SCIENCE↗

Intrinsic magnetic, structural and resistivity properties of ferromagnetic Mn{sub 0.5}Zn{sub 0.5}Al{sub x}Fe{sub 2−x}O{sub 4} nanoparticles

Highlights: ► Al{sup 3+} ion substituted Mn–Zn ferrite nanoparticles. ► Single phase cubic spinel structure changes with Al{sup 3+} substitution. ► Magnetization and coercivity decreased with increasing Al{sup 3+}. ► Resistivity increased with Al{sup 3+} substitution. - Abstract: In this work the nano-structural, magnetic and resistivity properties of Al{sup 3+} substituted Mn–Zn ferrites powders were investigated. Mn{sub 0.5}Zn{sub 0.5}Al{sub x}Fe{sub 2−x}O{sub 4} powders, where x = 0.0, 0.1, 0.2, 0.3, 0.4 and 0.5 were obtained by the sol–gel auto-combustion method. X-ray diffraction data indicate that, after substitution, all the samples consisted of the main spinel phase in combination with a small amount of a foreign Al{sub 2}O{sub 3} phase. The addition of Al{sup 3+} resulted in a reduction of particle size and density of the prepared samples. Cation distribution in the present study was estimated by using X-ray diffraction data. The tetrahedral site radii initially increased with Al{sup 3+} content while the octahedral site radii decreased with the Al{sup 3+} substitution. FTIR spectra show two strong absorption bands at 529–548 cm{sup −1} and 445–452 cm{sup −1} which are the typical bands for the cubic spinel crystal structure. The magnetic properties were measured by employing a vibrating sample magnetometer. It was observed that the saturation magnetization, coercivity and anisotropy field decreased with the increase of Al{sup 3+} substitution. Introduction of Al{sup 3+} ions into the Mn–Zn ferrite increased the values of the resistivity, especially in the lower temperature range.

36 MATERIALS SCIENCE↗

A review of metasurfaces: Physics and applications

Metamaterials are composed of periodic subwavelength metal/dielectric structures that resonantly couple to the electric and/or magnetic components of the incident electromagnetic fields, exhibiting properties that are not found in nature. This class of micro- and nano-structured artificial media have attracted great interest during the past 15 years and yielded ground-breaking electromagnetic and photonic phenomena. However, the high losses and strong dispersion associated with the resonant responses and the use of metallic structures, as well as the difficulty in fabricating the micro- and nanoscale 3D structures, have hindered practical applications of metamaterials. Planar metamaterials with subwavelength thickness, or metasurfaces, consisting of single-layer or few-layer stacks of planar structures, can be readily fabricated using lithography and nanoprinting methods, and the ultrathin thickness in the wave propagation direction can greatly suppress the undesirable losses. Metasurfaces enable a spatially varying optical response (e.g. scattering amplitude, phase, and polarization), mold optical wavefronts into shapes that can be designed at will, and facilitate the integration of functional materials to accomplish active control and greatly enhanced nonlinear response. This paper reviews recent progress in the physics of metasurfaces operating at wavelengths ranging from microwave to visible. We provide an overview of key metasurface concepts such as anomalous reflection and refraction, and introduce metasurfaces based on the Pancharatnam–Berry phase and Huygens' metasurfaces, as well as their use in wavefront shaping and beam forming applications, followed by a discussion of polarization conversion in few-layer metasurfaces and their related properties. An overview of dielectric metasurfaces reveals their ability to realize unique functionalities coupled with Mie resonances and their low ohmic losses. In addition, we also describe metasurfaces for wave guidance and radiation control, as well as active and nonlinear metasurfaces. Finally, we conclude by providing our opinions of opportunities and challenges in this rapidly developing research field.

36 MATERIALS SCIENCE↗

Morphology-controlled synthesis of Ti{sup 3+} self-doped yolk–shell structure titanium oxide with superior photocatalytic activity under visible light

Ti{sup 3+} self-doped yolk–shell structure titanium oxide nanoparticle aggregates are fabricated through an environmental template-free route and the reduction reaction at low temperature subsequently. After the Ti{sup 3+} doping, the reduced TiO{sub 2} sample exhibits a wide visible-light absorption ranged from 400 nm to 800 nm. The intrinsic hollow core–shell microstructure can make multiple reflections of light within the chamber, and thus results in more efficient use of the light source compared with solid structure. Besides, the large surface area can render the sample with a high activity. Therefore, Ti{sup 3+} self-doped yolk–shell structure titanium oxide exhibits a superior photocatalytic activity under visible light. This strategy is simple, cheap and mass-productive, which may shed light on a new avenue for large scale production of self-doped yolk–shell structural nano functional materials for catalyst, sensors, energy storage and other new applications. - Graphical abstract: A facile generic strategy is employed to prepare Ti{sup 3+} self-doped yolk–shell structure titanium oxide nanoparticle aggregates with the superior photocatalytic activity under visible light. - Highlights: • Yolk–shell TiO{sub 2} mesospheres are synthesized by solvothermal alcoholysis. • Ti{sup 3+} self-doped yolk–shell structure titanium oxide is obtained at low temperature. • It exhibits a remarkable photocatalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metamaterial-based theoretical description of light scattering by metallic nano-hole array structures

We have experimentally and theoretically investigated the light-matter interaction in metallic nano-hole array structures. The scattering cross section spectrum was measured for three samples each having a unique nano-hole array radius and periodicity. Each measured spectrum had several peaks due to surface plasmon polaritons. The dispersion relation and the effective dielectric constant of the structure were calculated using transmission line theory and Bloch's theorem. Using the effective dielectric constant and the transfer matrix method, the surface plasmon polariton energies were calculated and found to be quantized. Using these quantized energies, a Hamiltonian for the surface plasmon polaritons was written in the second quantized form. Working with the Hamiltonian, a theory of scattering cross section was developed based on the quantum scattering theory and Green's function method. For both theory and experiment, the location of the surface plasmon polariton spectral peaks was dependant on the array periodicity and radii of the nano-holes. Good agreement was observed between the experimental and theoretical results. It is proposed that the newly developed theory can be used to facilitate optimization of nanosensors for medical and engineering applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Explanations of the unusual photoluminescence observed in annealed InGaN/GaN multi quantum well

During growth and fabrication of devices, InGaN/GaN QWs undergo several thermal cyclings which causes redistribution of the elements, particularly In in the QW structures. This causes significant changes in the optical properties of the QWs. The thermal cyclings are often accompanied by alloy clustering and phase separation. So in order to have a deep knowledge of how the nano structures behave with thermal cyclings the process is simulated through successive annealing at high temperatures which are accompanied by photoluminescence (PL) measurements to obtain the optical properties at each stage. III-V nanostructures, in most usual cases, on annealing lead to a monotonic blue shift of the PL peak energy and goes into saturation. Recently there were reports in which the PL peak initially had a red shift which was followed by an increase in energy, a blue shift i.e. the PL peak goes through an inflexion. These unusual observations have been explained in this paper through quantum mechanical models and computations, which remained unexplained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theoretical Investigations of Nano and Bio Structures

The PI was supported by the DOE grant entitled “Theoretical Investigations of Nano and Bio Structures,” 3/1/13-2/28/17, $440,000, and a one-year no cost extension, 3/1/17-2/28/18. Its main emphasis was on nonequilibrium electron transport and novel nanoscale materials and devices, such as graphene nanoribbons, nanotube-based sensors, nanocircuits able to detect DNA replication, and DNA nanowires. We have also made major enhancements to our RMG suite of electronic structure codes, leading to much increased scalability, excellent parallelization of across both CPU and GPU nodes, and cleaner, refactored code base. For example, RMG performs excellently on Summit, DOE’s flagship supercomputer and the fastest supercomputer in the world. It scales to over 100,000 CPU cores and 20,000 GPUs, and can use multiple GPUs per node. It performs 80x faster per node than on DOE’s previous flagship supercomputer, Titan. This is the final report for grant DE-FG02-98ER45685.

36 MATERIALS SCIENCE↗

Design of novel nano-carriers for multi-enzyme co-localization

The main objective of this project is to design novel nano-structured carriers and strategies to co-localize multiple enzymes to mimic the functionalities of MECs. In order to achieve this goal, distinct approaches for enzyme co-localization were developed and evaluated. Specifically, we investigated different polymeric nano-carriers, both flexible and rigid, as platforms for co-localization, as well as distinct enzyme attachment techniques using model enzyme systems using glucose oxidase and horseradish peroxidase to control the spatial arrangement of the multiple enzymes on the nanocarriers. This platform technology can be potentially used to co-localize various enzyme systems and its broad applicability will be tested using the sclareol biosynthesis process to control the formation of products through the formation of MECs with multiple enzymes NgCPS and sSsSS to regulate the pathway of reactive intermediate to enhance the final product conversion rate.

59 BASIC BIOLOGICAL SCIENCES↗

Synchrotron x-ray diffraction study of micro-patterns obtained by spatially selective hydrogenation of GaAsN

We report a comparative synchrotron radiation x-ray diffraction study of GaAs{sub 1−y}N{sub y} micro-structures obtained by two different patterning methods: spatially selective H incorporation achieved by using H-opaque masks and spatially selective H removal attained by laser writing. These methods are emerging as original routes for fabrication of micro- and nano-structures with in-plane modulation of the bandgap energy. By measuring the out-of-plane and in-plane lattice parameters, we find that for both patterning approaches the largest part of the micro-structure volume remains tensile-strained and pseudomorphic to the substrate, regardless of the compressive-strained hydrogenated barriers. However, a larger lattice disorder is probed in the laser-written micro-structures and attributed to partial removal of H and/or strain changes at the micro-structure boundaries. This larger lattice disorder is confirmed by photoluminescence studies.

36 MATERIALS SCIENCE↗

Atomic to Nanoscale Origin of Vinylene Carbonate Enhanced Cycling Stability of Lithium Metal Anode Revealed by Cryo-Transmission Electron Microscopy

Batteries using lithium (Li) metal as anode are considered promising energy storage systems because of their high specific energy densities. The crucial bottlenecks for Li-metal anode are Li dendrites growth and side reactions with electrolyte inducing low Coulombic efficiency (CE) and short cycle life. Vinylene carbonate (VC), as an effective electrolyte additive in Li-ion batteries, has been noticed to significantly enhance the CE, while the origin of such an additive remains unclear. Here we use cryo-TEM imaging combing with EDS elemental and EELS electronic structure analyses to reveal the role of VC additive. We discovered that the electrochemically deposited Li metal (EDLi) in VC-containing electrolyte is slightly oxidized with the SEI being a nanoscale-mosaic like structure comprised of organic species, Li 2 O and Li 2 CO 3 ; while the EDLi formed in VC-free electrolyte is featured by a combination of fully oxidized Li with Li 2 O SEI layer and pure Li metal with multilayer nano-structured SEI. These results highlight the possible tuning of crucial structural and chemical features of EDLi and SEI through additives and consequently direct correlation with electrochemical performance, providing valuable guidelines to rational selection, design and synthesis of additives for new battery chemistries.

solid electrolyte interphase (SEI)↗

Optical bandgap of ultra-thin amorphous silicon films deposited on crystalline silicon by PECVD

An optical study based on spectroscopic ellipsometry, performed on ultrathin hydrogenated amorphous silicon (a-Si:H) layers, is presented in this work. Ultrathin layers of intrinsic amorphous silicon have been deposited on n-type mono-crystalline silicon (c-Si) wafers by plasma enhanced chemical vapor deposition (PECVD). The layer thicknesses along with their optical properties –including their refractive index and optical loss- were characterized by spectroscopic ellipsometry (SE) in a wavelength range from 250 nm to 850 nm. The data was fitted to a Tauc-Lorentz optical model and the fitting parameters were extracted and used to compute the refractive index, extinction coefficient and optical bandgap. Furthermore, the a-Si:H film grown on silicon was etched at a controlled rate using a TMAH solution prepared at room temperature. The optical properties along with the Tauc-Lorentz fitting parameters were extracted from the model as the film thickness was reduced. The etch rate for ultrathin a-Si:H layers in TMAH at room temperature was found to slow down drastically as the c-Si interface is approached. From the Tauc-Lorentz parameters obtained from SE, it was found that the a-Si film exhibited properties that evolved with thickness suggesting that the deposited film is non-homogeneous across its depth. It was also found that the degree of crystallinity and optical (Tauc) bandgap increased as the layers were reduced in thickness and coming closer to the c-Si substrate interface, suggesting the presence of nano-structured clusters mixed into the amorphous phase for the region close to the crystalline silicon substrate. Further results from Atomic Force Microscopy and Transmission Electron Microscopy confirmed the presence of an interfacial transitional layer between the amorphous film and the underlying substrate showing silicon nano-crystalline enclosures that can lead to quantum confinement effects. Quantum confinement is suggested to be the cause of the observed increase in the optical bandgap of a-Si:H films close to the a-Si:H/cSi interface.

36 MATERIALS SCIENCE↗

Effect of the graphite electrode material on the characteristics of molten salt electrolytically produced carbon nanomaterials

The electrochemical erosion of a graphite cathode during the electrolysis of molten lithium chloride salt may be used for the preparation of nano-structured carbon materials. It has been found that the structures and morphologies of these carbon nanomaterials are dependent on those of the graphite cathodes employed. A combination of tubular and spherical carbon nanostructures has been produced from a graphite with a microstructure of predominantly planar micro-sized grains and a minor fraction of more irregular nano-sized grains, whilst only spherical carbon nanostructures have been produced from a graphite with a microstructure of primarily nano-sized grains. Based on the experimental results, a best-fit regression equation is proposed that relates the crystalline domain size of the graphite reactants and the carbon products. The carbon nanomaterials prepared possess a fairly uniform mesoporosity with a sharp peak in pore size distribution at around 4 nm. The results are of crucial importance to the production of carbon nanomaterials by way of the molten salt electrolytic method. - Highlights: {yields} Carbon nanomaterials are synthesised by LiCl electrolysis with graphite electrodes. {yields} The degree of crystallinity of graphite reactant and carbon product are related. {yields} A graphite reactant is identified that enables the preparation of carbon nanotubes. {yields} The carbon products possess uniform mesoporosity with narrow pore size distribution.

36 MATERIALS SCIENCE↗

A Model for Predicting Thermoelectric Properties of Bi2Te3

A parameterized orthogonal tight-binding mathematical model of the quantum electronic structure of the bismuth telluride molecule has been devised for use in conjunction with a semiclassical transport model in predicting the thermoelectric properties of doped bismuth telluride. This model is expected to be useful in designing and analyzing Bi2Te3 thermoelectric devices, including ones that contain such nano - structures as quantum wells and wires. In addition, the understanding gained in the use of this model can be expected to lead to the development of better models that could be useful for developing other thermoelectric materials and devices having enhanced thermoelectric properties. Bi2Te3 is one of the best bulk thermoelectric materials and is widely used in commercial thermoelectric devices. Most prior theoretical studies of the thermoelectric properties of Bi2Te3 have involved either continuum models or ab-initio models. Continuum models are computationally very efficient, but do not account for atomic-level effects. Ab-initio models are atomistic by definition, but do not scale well in that computation times increase excessively with increasing numbers of atoms. The present tight-binding model bridges the gap between the well-scalable but non-atomistic continuum models and the atomistic but poorly scalable ab-initio models: The present tight-binding model is atomistic, yet also computationally efficient because of the reduced (relative to an ab-initio model) number of basis orbitals and flexible parameterization of the Hamiltonian.

Lee, Seungwon↗

From Interfaces to Bulk: Experimental-Computational Studies Across Time and Length Scales of Multi-Functional Ionic Polymers

Neutron experiments coupled with computational components have resulted in unprecedented understanding of the factors that impact the behavior of ionic structured polymers. Additionally, new computational tools to study macromolecules, were developed. In parallel, this DOE funding have enabled the education of the next generation of material researchers who are able to take the advantage neutron tools offer to the understanding and design of advanced materials. Our research has provided unprecedented insight into one of the major factors that limits the use of ionizable polymers, combining the macroscopic view obtained from the experimental techniques with molecular insight extracted from computational studies leading to transformative knowledge that will impact the design of nano-structured, materials. With the focus on model systems, of broad interest to the scientific community and to industry, the research addressed challenges that cut across a large number of polymers, independent of the specific chemical structure or the transported species.

36 MATERIALS SCIENCE↗