Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NaN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Dynamic properties of FeCrMnNi, a high entropy alloy

The goal of this paper was to assess the dynamic properties of a new class of materials, High entropy alloys (HEAs). Specifically, gas gun experiments coupled with recovery were performed on a specific HEA, FeCrMnNi, to measure its equation of state (EOS) and its spall strength, which is a measure of the stress required to nucleate voids under shock loading conditions. While there has been a plethora of work performed to assess the mechanical properties of these HEAs under uniaxial stress conditions as a function of strain rate, investigation of its properties in dynamic extremes remains rare. The current work fills this gap in knowledge for this novel class of materials. Our results show that the measured EOS for this material at one velocity was in reasonable agreement with an estimated Hugoniot. Furthermore, while the spall strength for this material was found to be ~1.9 GPa, with some variation based on sample location, the main failure mode was brittle. This brittle failure leading to formation of cracks in the material is different than the ductile failure observed in pure iron and its alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Dislocation-density evolution and pileups in bicrystalline systems

Here, a dislocation-density crystalline plasticity (DCP) framework based on total and partial dislocation densities interactions was used to investigate the behavior of Cu/Pb bicrystals with a focus on GB effects. The modeling predictions were validated with bicrystal compression micropillar experiments. A key new aspect of the modeling approach is to account for partial dislocation-densities. A GB formulation that is directly linked to GB energies was used to monitor GB transmission and blockages, such that pileups can be monitored and predicted at the GB interfaces for misorientations. The predictions indicate that pileups can form due to fully and partially blocked slip-rates and perfect and partial dislocation-densities. As the nominal strain increases from five to fifteen percent, dislocation-densities and pileups significantly increase by almost an order of magnitude. The proposed validated approach provides a microstructural scale predictive framework that accounts for a myriad of defects related to the interactions of partial and perfect dislocation densities that interact at highly misoriented GBs; it is these interactions that are critical to the formation and evolution of dislocation-density pileups that can lead to physically limiting stress accumulations in bicrystals.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Elucidating facet dependent electronic and electrochemical properties of Cu 2 O nanocrystals using AFM/SCEM and DFT

Cuprous oxide (Cu 2 O) has extensively been studied owing to its excellent optical, magnetic, and catalytic properties. Many of these properties are facet-dependent and have not been well elucidated. This work synthesized cubic, cuboctahedral, octahedral, and rhombic dodecahedral shaped Cu 2 O nanocrystals of ~300 nm in size to evaluate the facet-dependent electrochemical activities. Here, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were firstly used to reveal the average electrochemical activities at the ensemble level. Atomic force microscopy-scanning electrochemical microscopy (AFM-SECM) was further used to assess the electrochemical activities of different Cu 2 O nanocrystals at the facet level. Hexaammineruthenium (III) chloride ({Ru(NH 3 ) 6 }Cl 3 ) was employed as the probe molecules that reacted with four different Cu 2 O nanocrystals under —400mV and yielded ~300 pA current between the probing tip and the nanocrystal surface. The tip-current mapping results indicate that rhombic dodecahedral Cu 2 O exhibits higher electrocatalytic activity than other shaped Cu 2 O, due to the presence of dominant exposed facet of {110} as indicated by the relatively high tip current. Density-functional theory (DFT) calculations confirmed the facet dependence of local surface energy and electronic structure of Cu 2 O nanocrystals. Besides electrochemical activity, the surface work function and adsorptive properties were both observed to vary with the shape and dominant exposed facets of Cu 2 O. This study presented a unique experimental and computational chemistry approach to analyze surface electrochemical properties of Cu 2 O crystals at a crystalline facet level.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Development of an in situ ion irradiation scanning electron microscope

An in situ ion irradiation scanning electron microscope (I 3 SEM) has been developed, installed, and integrated into the Ion Beam Laboratory at Sandia National Laboratories. The I 3 SEM facility combines a field emission, variable pressure, scanning electron microscope, a 6 MV tandem accelerator, high flux low energy ion source, an 808 nm-wavelength laser, and multiple stages to control the thermal and mechanical state of the sample observed. The facility advances real-time understanding of materials evolution under combined environments at the mesoscale. As highlighted in multiple examples, this unique combination of tools is optimized for studying mesoscale material response in overlapping extreme environments, allowing for simultaneous ion irradiation, implantation, laser bombardment, conductive heating, cooling, and mechanical deformation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Oxygen redox chemistry: A new approach to high energy density world

Sodium-ion batteries (SIBs) have been considered as promising candidates for large scale energy storage systems due to the great abundance of sodium resources. For sodium layered transition metal oxide cathode materials, oxygen redox can increase the energy density by enabling extra capacity and delivering high voltage. Here we provide a comprehensive overview of oxygen redox in SIBs from the perspectives of mechanism, challenges, and solutions. The previous studies on voltage hysteresis, capacity decay and oxygen release induced by oxygen redox as well as the effectiveness of different strategies including superlattice engineering, elemental substitution, and surface modification on the electrochemical performances of cathode materials with oxygen redox are comprehensively summarized with typical examples. Finally, the remaining challenges and the future research direction are discussed.

25 ENERGY STORAGE↗
DOE OSTI2020

Engineering the electronic and strained interface for high activity of PdM core @Pt monolayer electrocatalysts for oxygen reduction reaction

Alloyed nanoparticles with core-shell structures provide a favorable model to modulate interfacial interaction and surface structures at the atomic level, which is important for designing electrocatalysts with high activity and durability. Herein, core-shell structured Pd 3 M@Pt/C nanoparticles with binary PdM alloy cores (M = Fe, Ni, and Co) and a monolayer Pt shell were successfully synthesized with diverse interfaces. Among these, Pd 3 Fe@Pt/C exhibited the best oxygen reduction reaction catalytic performance, roughly 5.4 times more than that of the commercial Pt/C catalyst used as reference. The significantly enhanced activity is attributed to the combined effects of strain engineering, interfacial electron transfer, and improved Pt utilization. Density functional theory simulations and extended X-ray absorption fine structure analysis revealed that engineering the alloy core with moderate lattice mismatch and alloy composition (Pd 3 Fe) optimizes the surface oxygen adsorption energy, thereby rendering excellent electrocatalytic activity. Finally, future researches may use this study as a guide on the construction of highly effective core-shell electrocatalysts for various energy conversions and other applications.

25 ENERGY STORAGE↗
DOE OSTI2022

Mechanistic insights into sulfate and phosphate-mediated hexavalent chromium removal by tea polyphenols wrapped nano-zero-valent iron

Nano zero-valent iron via green synthesis (g-nZVI) has great potential in removing toxic hexavalent Cr(VI) from industrial wastewater. Sulfate and phosphate in wastewater can influence Cr(VI) removal by g-nZVI. Here, in this study, the Cr(VI) removal kinetics by different g-nZVI materials were investigated with the existence of sulfate and/or phosphate, and the corresponding mechanisms were first revealed using multiple characterizations, including X-ray absorption near-edge spectra (XANES) and X-ray photoelectron spectroscopy (XPS). The results showed that Cr(OH) 3 was the dominant species initially formed on the surface of g-nZVI particles before transforming to Cr 2 O 3 during the reaction of g-nZVI with Cr(VI). Sulfate in wastewater can promote the reduction from Cr(VI) to Cr(OH) 3 by g-nZVI, because sulfate triggers the release of Fe(II) and tea polyphenols (from tea extracts) from the g-nZVI surface due to the corrosion of Fe 0 core, which is in line with an obvious increase in pseudo-second-order rate constant (k 2 ) and subtle change in Cr(VI) removal capacity (q e ). However, phosphate impedes the g-nZVI corrosion and inhibits q e because of the inner-sphere complexation of phosphate onto g-nZVI decreasing the released Fe(II) for Cr 2 O 3 production. When sulfate and phosphate coexisted in contaminated water, the inhibition effect of phosphate in Cr(VI) removal by g-nZVI was stronger than the promotion of sulfate. Accordingly, q e value of g-nZVI declined from 93.4 mg g –1 to 77.5 mg g –1 , while k 2 remained constant as the molar ratio of phosphate/sulfate increased from 0.1 to 10 in water. This study provides new insights into applying g-nZVI in efficient Cr(VI) removal from contaminated water with enrichment of sulphates and phosphates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effects of helium cavity size and morphology on the strength of pure titanium

In this study, high-purity α-titanium was implanted with helium to observe cavity morphology – size, number density, and form (i.e., bubbles vs. voids) – effects on materials strength. Increasing implantation temperatures lead to an Arrhenius-type (i.e., exponential) increase in cavity size, a transition from spherical bubbles to faceted voids, and a marked increase in strength (~20–50%). Implanted samples deformed uniformly in contrast to nano-compression of unimplanted or alloyed titanium, but pillars with the largest faceted voids developed a type of bulging localized deformation. Affected voids were repeatedly sheared, becoming rough and shrunken. Dislocation-cavity interactions and the role of helium content within cavities are considered.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Taming the Pseudoelastic Response of Nitinol Using Ion Implantation

Implantation of Ni 50.5 Ti 49.5 wire with 30 MeV Ni 6+ ions at doses (< 0.1 DPA) typically smaller than employed in the literature is shown to systematically alter the pseudoelastic response, with extrema in Berkovich nanoindentation load (+50%), hysteresis (–60%), and recoverable displacement (–19%) occurring at ~ 3.6 μm below the implantation surface. These extraordinary values are attributed to ~ 10 to 20 nm amorphous clusters that constrain the stress-induced B2-B19' phase transformation. This is substantiated by phase field simulations of crystalline-amorphous composites and molecular dynamics simulations of crystalline-vacancy cluster composites showing the spatial refinement of martensite caused by nm-scale defects. Finally, the results suggest that ion implantation may potentially expand the processing and performance space for NiTi, by creating amorphous defects at smaller length scales than dislocation substructures produced by conventional deformation processing.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The effect of annealing on kink band formation in Ag/Fe nanolaminates

Kink banding is a common, though not well understood, failure mechanism in anisotropic materials such as nano metallic laminates (NMLs). In this work, we investigate the effect of annealing on kink band (KB) formation in Ag/Fe NMLs prepared by accumulative roll bonding (ARB) using in situ micropillar compression, scanning/transmission electron microscopy (S/TEM), and transmission Kikuchi diffraction (TKD) analyses. Our results show that annealing increases the KB initiation strain, decreases the probability of KB formation, and decreases the load drop magnitude accompanying kink banding in Ag/Fe NMLs. Post-compression analyses reveal that annealing facilitates more uniform deformation of pillars and affects the formation of geometrically necessary grain boundaries (GNBs) near the kink band boundary (KBB). Compared to its as-rolled counterpart, annealed Ag/Fe has wider KBs with blunter KBBs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A pathway to synthesizing single-crystal Fe and FeCr films

Nuclear reactor environments provide a unique scientific and engineering challenge wherein materials must tolerate prolonged exposure to concurrent irradiation, elevated temperatures, and corrosive media. However, uncontrolled variability in material composition and structure often prohibits truly single-variable experiments that can reveal basic aspects of environmental damage. Here, Magnetron sputtering is used to provide a more controlled model system for these fundamental studies, yielding reproducible single-crystal Fe and FeCr thin films containing 8 and 18 at.% Cr. Electron microscopy is used to determine the systematic correlations between growth conditions and the resulting film microstructure and surface morphology. It is found that the substrate temperature and applied radio frequency (RF) bias can be tuned to obtain consistent homogeneous and single crystal films with a minimal amount of Ar impurities from the RF bias process. Epitaxial, single-crystal Fe films are obtained on MgO substrates at 500 °C with 10 Watt (W) RF bias deposition. However, when Cr is alloyed with Fe, higher substrate temperatures (600 °C) and applied RF biases (15 W) are required to achieve a similar epitaxial single-crystal FeCr film. Accelerated molecular dynamics simulations reveal that Cr impedes surface transport, explaining the need for higher temperature and bias during the growth of the Cr-bearing films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mechanical and tribological properties of anodic Al coatings as a function of anodizing conditions

Enhanced wear and corrosion resistance properties are vital for numerous functional and decorative applications. Anodizing is a process frequently used to generate stable oxide coatings on metal surfaces, including aluminium (Al). In this work, we present an evaluation of process variables for optimized anodized coating properties using existing methods and as a baseline for novel coating development. A representative relatively pure Al alloy was chosen as a model system with a goal of finding conditions to achieve high wear coatings with retained ductility. AA5052 alloy coupons were anodized in two different electrolytes (sulfuric and phosphoric acid) to study the effects of anodizing conditions on the mechanical and tribological properties of the anodic coatings. Porosity was evaluated with microscopy, coating hardness was determined via nanoindentation, and tribological properties were characterized using a pin-on-disk tribometer. These measurements were correlated and a loading evaluation was performed to assess the optimum nanoindentation parameters for the use of representative coupons without the need for special processing prior to anodizing. The porosity and coating thickness were found to depend on the anodizing time and the type of electrolyte. Thicker and harder anodic coatings were generated in sulfuric acid compared to phosphoric acid. Porosity studies of the anodic coatings generated in phosphoric acid revealed that coating porosity decreased as the anodizing time increased. Both electrolytes generated anodic coatings with improved tribological properties (friction coefficient and dimensional wear rate), and an optimum processing time was identified for best wear properties.

36 MATERIALS SCIENCE↗