Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NIFS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Thin Oxides as a Cu Diffusion Barrier for NIF Be Ablator Capsules

The NIF point design uses a five-layer capsule to modify the X-ray absorption in order to achieve optimized shock timing. A stepped copper dopant design defines the layer structure. The production of the capsule involves pyrolysis to remove the inner plastic mandrel. Copper atoms diffuse radially and azimuthally throughout the capsule during pyrolysis. This diffusion significantly diminishes the capsule performance during implosion. Thermal and coated oxide barrier layers employed between layers mitigate the diffusion of copper during the mandrel removal process. The copper atoms do not diffuse through this barrier during pyrolysis. A capsule fabrication method that produces a capsule with a thin oxide layer will be discussed.

42 ENGINEERING↗

Detailed Database Survey for DT-Fusion-Neutron-Induced Gamma-Rays relevant to THD-filled Ge-doped Plastic Capsules on the NIF

Based on Monte Carlo calculations with new cross sections and level scheme information from BNL nuclear data center, we made detailed studies about 14 MeV neutrons induced gamma rays in hydrogen, deuterium, tritium, carbon and oxygen isotopes. These results will help us in gamma reaction history diagnostic measurement with gas Cherenkov detector (GCD) for NIF THD capsule experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a New Materials Platform to Study Iron and Diamond at Ultrahigh Pressures Using NIF

The goal of this proposal was to develop the capability to subject solids to ultrahigh compression using ramp loading techniques at NIF. Specifically, we proposed to examine the equation of state, strength, and phase transitions in iron and diamond to 30 Mbar pressures. Diamond and iron are fundamental materials of profound interest in condensed matter physics, materials science, and planetary science. The behavior of these solids under ultrahigh compression is essential to understanding planetary interiors and for probing the limits to our understanding of solid state behavior at extreme conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NIF ReShock/Shear Photometrics Design Considerations

The design of the photometrics for the NIF Shock/Shear campaign was driven by three linked considerations: the backlighter (BL) material had to be chosen such that it’s He-α emission line gave high enough contrast to measure mix width and see the shock propagation in the target wall, the BL beam geometry had to give sufficient BL spot dimensions and intensity to produce a uniform He-α radiograph of the target, and the BL/pinhole system had to have a high enough resolution and signal to be able to measure the quantities of interest. The design considerations are linked such that the required contrast determines the BL material, the BL material determines what laser intensity range is need for He-α emission, and the resulting He-α emission intensity helps determine whether or not there will be sufficient signal for analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Non-destructive analysis of DU content in the NIF hohlraums

The advantage of using depleted uranium (DU) hohlraums in high-yield deuterium-tritium (DT) shots at the National Ignition Facility (NIF) is addressed by Döppner, et al., in great detail [1]. This DU based hohlraum incorporates a thin layer of DU, ~7 μm thick, on the inner surface along with a thin layer of a gold coating, ~0.7 μm thick, while the outer layer is ~22 μm thick gold. A thickness measurement of the DU layer can be performed using an optical microscope where the total DU weight can be computed provided a uniform DU layer. However, the uniformity of the thickness is not constant throughout the hohlraum since CAD drawing calculations of the DU weight do not agree with the computed values from optical measurements [2]. Therefore, a non-destructive method for quantifying the DU content in hohlraums has been established by utilizing gamma-ray spectroscopy. The details of this method, along with results from several hohlraums, are presented in this report.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Status Update: Modeling Energy Balance in NIF Hohlraums

We have developed a standardized methodology to model hohlraum drive in NIF experiments. We compare simulation results to experiments by 1) comparing hohlraum xray fluxes and 2) comparing capsule metrics, such as bang times. Long-pulse, high gas-fill hohlraums require a 20-28% reduction in simulated drive and inclusion of ~15% backscatter to match experiment through (1) and (2). Short-pulse, low fill or near-vacuum hohlraums require a 10% reduction in simulated drive to match experiment through (2); no reduction through (1). Ongoing work focuses on physical model modifications to improve these matches.

42 ENGINEERING↗

Study of the integrity of pressurized LEH window assemblies at cryogenic temperatures for NIF targets

The National Ignition Facility (NIF) is a directorate of LLNL, a DOE Lab, and is home to the world’s largest laser. This laser shoots its 192 beams at a target about the size of a pencil eraser. Within the target are two main chambers; and depending on the type of shot, those chambers need to be pressurized to a certain point at a very low temperature (18 Kelvin). The component used for keeping the hohlraum at its designated pressure is a Laser Entrance Hole (LEH) window, made from a thin (0.5um) polyimide film and an aluminum washer attached with a miniscule amount of polymeric adhesive. One issue that has been known to happen is the chambers will leak, at very low rates (5.0E-7 mBar-liter/s and under). At higher pressures significantly larger leak rates have been observed.There are three proposed mechanisms by which the LEH windows are leaking. The first is that there is a small pinhole somewhere in the freestanding film. This is the most unlikely because before any film is shipped from Luxel, it must pass a 50-75 torr room temperature pressure test. The second is a tear in the film at the edge of the washer. This type of damage suggests that the film is under additional stress at this edge portion and/or the edge of the washer itself is what is doing the damage. Lastly, it has been hypothesized that there are small channels under the window that do not get completely filled by the glue and, if they connect to the edge of the freestanding portion of the film, then the pressure can escape through them. These channels were the mechanism being most directly tested over the course of the experiments.

42 ENGINEERING↗

February 2017 - NIF Highlights

February was a very productive month with only 20 shot days on the calendar. There were 41 target shots performed for the HED, ICF, and the Discovery Science (DS) program. The DS program had a week dedicated to their experiments that was extraordinarily fruitful: 14 target shots were performed for five independent teams, each of whom had a unique experimental platform to field. The teams and the facility worked extraordinarily well to pull off this feat! Additionally, the facility developed high-energy laser operations on a demonstration quad to investigate taking NIF to a new level of performance, and the ICF program demonstrated a 40% increase in the yield from a capsule that had a new, 5-μm-diameter fill tube that apparently mitigates some of the issues that have affected implosions to date. Details follow below.

42 ENGINEERING↗

Observation and assessment of debris on NIF transport mirrors

The purpose of this report is to document the quantity and nature of debris found on the surface of NIF transport mirrors during initial system operations in calendar years 2009 and early 2010. Observations were made of LM5s equipped with viewing windows, returned LM8s, and a few returned LM7s. In all cases the mirror surfaces were illuminated with grazing-angle bright light so as to highlight debris. For the LM5s this illumination was provided by bar lights that are permanently attached to the mirror line replaceable units (LRUs) and are used in-situ. For all other surfaces, illumination was provided by a hand-held “bright-light” 75,000 candlepower flashlight. The number of debris items on mirror surfaces were determined by counting items individually or, if they were too numerous to count over the entire surface, by determining an approximate representative number density (number per area) from which a total debris count could be estimated. Approximate sizes of debris items were most often estimated visually, but occasionally particles were removed from the surface by picking or wiping and subsequently analyzed in an optical or scanning electron microscope. Particles from enclosures were collected by swiping the surface as for the verification of cleanliness. The swipe paper provides a convenient substrate for the subsequent examination and analysis of the particles.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

CY20 AIHA Internal Audit of ALAB and NIF-HPL and CY20 Management Review of ALAB

An internal audit was performed in ALAB to ISO 17025:2017; EPA LQST and AIHA requirements using the current AIHA Checklist. The scope of the internal audit was the annual review of AIHA-accredited industrial hygiene methods performer in both ALAB and NIF HPL. The Internal audit resulted in 3 deficiencies and 3 comments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast Neutron Imaging and Tomography at NIF [Slides]

The presentation at the first Prompt Radiation Detection and Imaging Workshop covered fast neutron and tomography work at the National Ignition Facility (NIF).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

LANL diagnostics at NIF [Slides]

Nuclear Diagnostics are described at the National Ignition Facility (NIF) including Reaction History and Neutron Imaging.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Diffraction Measurement of Reaction Products in Shock Compressed TATB on the NIF

The shock-induced reaction of high explosives to gaseous and solid reaction products is a rapid, complex process. Understanding solid reaction product structure and formation kinetics is essential in determining the high-pressure equation of state of these multicomponent systems. We use the National Ignition Facility (NIF) to shock compress ~500-µm thick pressed powder high-explosive TATB samples to 70-135 GPa and collect in situ structural data on detonation byproducts using the TARDIS X-ray diffraction diagnostic. Velocimetry is used to record the transmitted compression wave profile, which is well described by Cheetah hydrocode simulations coupled with a reactive flow model, providing strong evidence of reaction in the TATB sample. While an unambiguous determination of the product phases was not possible owing to the low signal-to-noise quality of the diffraction signal, X-ray diffraction data of the product phases formed within the first 50 ns of the reaction is most consistent with a mixture of amorphous products and crystalline hexagonal diamond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗