Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Model structural error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Experience gained from computer processing of physical experimental data during the restoration of measured values

The processing stage in which the restored values of the physical parameters are received is described. The following main steps are discussed: estimation of the state of the telemetry data, processing of the calibration data, and determination of the errors in the data; data decommutation and analysis of the structure of measurement cycles for each instrument; decoding, estimates of the reliability of the restored data, and their agreement with the models adopted for the measurement process; and analysis of errors due to deterministic and random factors. A block diagram of the method is presented.

Mamotko, Z. N.↗
DOE OSTI2025

High‐Asymmetry Metasurface: A New Solution for Terahertz Resonance via Active Learning‐Augmented Diffusion Model

Terahertz (THz) metamaterials with high‐figure‐of‐merit (high‐FoM) performance resonance are essential for advancing sensors, detectors, and imagers. Conventional designs focus on symmetric or low‐asymmetry geometric structures, leaving high‐asymmetry designs largely unexplored due to the inefficiency of trial‐and‐error‐based rational design. Recent deep learning techniques offer automation and acceleration but are constrained by the need for large datasets inherent to their data‐driven nature. Here, a novel prior knowledge‐guided generative model augmented by a physics‐constrained active learning mechanism to design high‐asymmetry metamaterials. An advanced diffusion model learns features from a small set of classical structures with high‐FoM THz resonance and generates new high‐asymmetry structures. To mitigate the limited number of classical structures, the generated high‐asymmetry structures are actively selected and integrated into the initial training dataset based on their physical characteristics. Experimental results demonstrate the superior resonance performance of the generated high‐asymmetry metamaterials over classical designs, exhibiting improvements exceeding 30% in key resonance metrics. Remarkably, this performance is attained using only 68 classical structures as the initial training dataset, significantly reducing the data requirements for deep learning‐based metamaterial design. The proposed scheme for generating high‐asymmetry structures provides a new effective and efficient solution for high‐FoM resonance, expanding applications in high‐sensitivity THz metadevices.

diffusion model↗
NASA NTRS2020

Global Aerodynamic Modeling Using Automated Local Model Networks in Real Time

A novel method is presented for automated real-time global aerodynamic modeling using local model networks, known as Smoothed Partitioning with Localized Trees in Real Time (SPLITR), as part of NASA’s Learn-to-Fly technology development initiative. The global nonlinear aerodynamics are partitioned into several local regions known as cells, with the dimension, location, and timing of each partition automatically selected based on a residual characterization procedure, under the constraints of real-time operation. Regression trees represent the successive partitioning of the global flight envelope and describe the evolution of the cell structure. Recursive equation-error least-squares parameter estimation in the time domain is used to estimate a model that represents the local aerodynamics in each region, so that it can be updated independently with non-contiguous data in the range of each cell over time. A weighted superposition of these piecewise local models across the flight envelope forms a global nonlinear model that also accurately captures the local aerodynamics. The SPLITR approach is demonstrated using both simulation and flight data, and the results are analyzed in terms of model predictive capabilities as well as interpretability. The results show that SPLITR can be used to automatically partition complex nonlinear aerodynamic behavior, produce an accurate model, and provide valuable physical insight into the local and global aerodynamics.

Weinstein, Rose↗
DOE OSTI2024

Thermodynamics-informed latent space dynamics identification

This software showcases a latent space dynamics identification method, namely tLaSDI, that embeds the first and second principles of thermodynamics. The latent variables are learned through an autoencoder as a nonlinear dimension reduction model. The latent dynamics are constructed by a neural network-based model that precisely preserves certain structures for the thermodynamic laws through the GENERIC formalism. An abstract error estimate is established, which provides a new loss formulation involving the Jacobian computation of autoencoder. The autoencoder and the latent dynamics are simultaneously trained to minimize the new loss. Computational examples demonstrate the effectiveness of tLaSDI, which exhibits robust generalization ability, even in extrapolation. In addition, an intriguing correlation is empirically observed between a quantity from tLaSDI in the latent space and the behaviors of the full-state solution.

Cheung, Siu Wun↗
NASA NTRS1985

Compensator development and examination of performance and robustness

This research focuses on the development of compensators to control the mean square surface error of a wraprib antenna. The methodology is as follows: A model of appropriate size and structure is developed by looking at the convergence of functional gains for control and estimation. Then an LQG compensator is designed using this model. Finally, the compensator is simplified using balanced realization theory. In the conventional approach for compensator design, there is no mechanism for ensuring that the model is adequate for designing a compensator which will achieve the desired level of performance. It is shown here that both the model order and compensator order are directly related to the closed loop performance requirements for the system.

Source record↗
NASA NTRS1990

An optimal estimation approach for enhanced identification of large space structures

A very robust technique for the realization/identification of structural dynamic systems is presented. This methodology combines the eigensystem realization algorithm (ERA) and minimum model error (MME) techniques to develop an extremely robust algorithm able to distinguish modes whose amplitudes are small fractions of the noise amplitude. As the amplitude of the noise grows, the enhanced robustness of the combined ERA/MME algorithm becomes more significant. This is a result of the MME being able to produce simulated measurements of much greater accuracy than the original measurements, for input to the ERA. The new method was able to determine correct model order at noise levels many times higher than the original ERA for the realization problem in which the model order must be derived.

Mook, D. Joseph↗
NASA NTRS1991

Identification and control of NASA's ACES structures

Results are presented of identification and control experiments on NASA's ACES structure at the Marshall Space Flight Center. The models used for controller design were obtained from identification experiments employing the algorithm Q-Markov cover. The OVC algorithm used for control design produces a controller minimizing the control energy of the closed-loop system, subject to inequality constraints on each of the output variances. The identified model matches the experimental data for the ACES structure reasonably well. The line of sight pointing errors of the structure are substantially reduced by the controllers.

Liu, K.↗
NASA NTRS1991

Logic flowgraph methodology - A tool for modeling embedded systems

The logic flowgraph methodology (LFM), a method for modeling hardware in terms of its process parameters, has been extended to form an analytical tool for the analysis of integrated (hardware/software) embedded systems. In the software part of a given embedded system model, timing and the control flow among different software components are modeled by augmenting LFM with modified Petrinet structures. The objective of the use of such an augmented LFM model is to uncover possible errors and the potential for unanticipated software/hardware interactions. This is done by backtracking through the augmented LFM mode according to established procedures which allow the semiautomated construction of fault trees for any chosen state of the embedded system (top event). These fault trees, in turn, produce the possible combinations of lower-level states (events) that may lead to the top event.

Muthukumar, C. T.↗
NASA NTRS1996

Optimal and robust control of transition

Optimal and robust control theories are used to determine feedback control rules that effectively stabilize a linearly unstable flow in a plane channel. Wall transpiration (unsteady blowing/suction) with zero net mass flux is used as the control. Control algorithms are considered that depend both on full flowfield information and on estimates of that flowfield based on wall skin-friction measurements only. The development of these control algorithms accounts for modeling errors and measurement noise in a rigorous fashion; these disturbances are considered in both a structured (Gaussian) and unstructured ('worst case') sense. The performance of these algorithms is analyzed in terms of the eigenmodes of the resulting controlled systems, and the sensitivity of individual eigenmodes to both control and observation is quantified.

Bewley, T. R.↗
NASA NTRS2003

Update on Integrated Optical Design Analyzer

Updated information on the Integrated Optical Design Analyzer (IODA) computer program has become available. IODA was described in Software for Multidisciplinary Concurrent Optical Design (MFS-31452), NASA Tech Briefs, Vol. 25, No. 10 (October 2001), page 8a. To recapitulate: IODA facilitates multidisciplinary concurrent engineering of highly precise optical instruments. The architecture of IODA was developed by reviewing design processes and software in an effort to automate design procedures. IODA significantly reduces design iteration cycle time and eliminates many potential sources of error. IODA integrates the modeling efforts of a team of experts in different disciplines (e.g., optics, structural analysis, and heat transfer) working at different locations and provides seamless fusion of data among thermal, structural, and optical models used to design an instrument. IODA is compatible with data files generated by the NASTRAN structural-analysis program and the Code V (Registered Trademark) optical-analysis program, and can be used to couple analyses performed by these two programs. IODA supports multiple-load-case analysis for quickly accomplishing trade studies. IODA can also model the transient response of an instrument under the influence of dynamic loads and disturbances.

Moore, James D., Jr.↗
NASA NTRSDate not supplied

Probabalistic Risk Analysis and Thermal Margin Process for an Inflatable Aeroshell

Uncertainties always exist in atmospheric entry aeroheating environments and the thermal response of thermal protection system (TPS) material. These uncertainties are mitigated in the design by ap-plying margin and factors of safety to the TPS. Entry vehicle TPS is often conservatively over-sized for the heat loads that are experienced along the entry trajectory by stacking worst-case scenarios together. Additionally, the current TPS design and margin process used by NASA offers very little insight into the risk of over-temperature during flight and the reliability of the heat shield performance [1,3]. A probabilistic margin process can be used to calculate the amount of TPS margin necessary to survive a given entry heat load at a specified level of risk [2,3,4]. The vehicle’s initial entry state (entry velocity, flight path angle, and entry mass) determines the expected atmospheric entry environmental conditions and resulting heat load that the entry vehicle will experience. If there is flexibility in the entry state, then this process can be used to select an appropriate combination of entry state parameters and TPS size to target a desired reentry reliability. This probabilistic margin process allows engineers to make informed aeroshell design, entry-trajectory design, and TPS performance risk trades while preventing excessive TPS margin from being applied. The probabilistic TPS margin process has been performed to determine TPS thickness and entry heating constraints given an acceptable risk level for the Low Earth Orbit Flight Experiment of an Inflatable Decelerator (LOFTID) flight project. The process is used in a manner to size the entry heat load for a given flexible TPS (FTPS) thickness so that it meets project reliability standards while allowing the FTPS and the underlying inflatable structure (IS) to be pushed to adequately high temperatures. Since the LOFTID project is an experimental flight demonstration, it is de-sired to drive the FTPS and IS to temperatures that cover a large range of their thermal response models’ applicability. This will allow the thermal response models to be better improved and validated post-flight using LOFTID’s extensive instrumentation embedded within the aeroshell. The presentation demonstrates how uncertainty analysis is carried out using an end-to-end Monte Carlo process where three separate Monte Carlo simulations are run in sequence. The first Monte Carlo simulation operates on the entry trajectory model to generate trajectory parameter dispersions that are fed into the second Monte Carlo simulation. The second Monte Carlo simulation operates on the aerothermodynamics model to generate aeroheating parameter dispersions that are fed into the third Monte Carlo simulation. The third Monte Carlo simulation operates on the FTPS material thermal response model to generate the final FTPS/IS thermal response dispersions. The end-to-end Monte Carlo simulation propagates the uncertainties of each model into the next to quantify the resulting uncertainty of the FTPS/IS thermal response. The fractional contributions of the uncertain parameters in the trajectory, aerothermal, and thermal response models to the variance in the FTPS/IS thermal response is determined as a byproduct of the Monte Carlo analysis. The structural uncertainty of the FTPS thermal response model is evaluated by flight relevant ground testing and model error analysis using test measurements. This probabilistic TPS margin process had never been applied to an entry vehicle and it is one of the LOFTID project’s goals to demonstrate its merits.

Steven A. Tobin↗
NASA NTRS2020

An Observation‐Driven Approach to Improve Vegetation Phenology in a Global Land Surface Model

An empirical model calibration approach is presented that aims to approximate missing biosphere processes in a global land surface model without the need for substantial model structural changes. The strategy is implemented here using the NASA Catchment‐CN land surface model and Moderate Resolution Imaging Spectroradiometer (MODIS) observations of the fraction of absorbed photosynthetically active radiation (FPAR). Existing plant functional types (PFTs) of the Catchment‐CN model are divided into three subtypes, based on the bias between the model‐simulated and MODIS‐observed FPAR. Separate sets of vegetation parameters for each subtype are then calibrated at a small number of grid cells with homogeneous, single‐PFT land cover, using MODIS FPAR reference observations from 2003 to 2009. The effectiveness of the empirical approach at improving the realism of modeled vegetation dynamics is investigated with two global model simulations for the period 2010–2016, one using the newly calibrated parameter values and the other using the original values. Globally, the calibrated parameters reduce the root mean square error (RMSE) of the modeled FPAR with respect to MODIS by 0.029 (∼10%) on average. In some regions, substantially larger RMSE reductions are achieved. RMSE reductions are primarily driven by model bias reductions, with neutral effects on the temporal correlation skill. While the empirical approach is suitable for achieving consistent model improvements, it is shown to be sensitive to the characteristics of the model error, specifically a dominance of the bias component in the case of Catchment‐CN. Ultimately, more fundamental model structural changes may be required to achieve better improvements.

J. Kolassa↗
NASA NTRS1991

Simulator evaluation of system identification with on-line control law update for the controls and astrophysics experiment in space

A procedure for optimizing the performance of large flexible spacecraft that require active vibration suppression to achieve required performance is presented. The procedure is to conduct on-orbit testing and system identification followed by a control system design. It is applied via simulation to a spacecraft configuration currently being considered for flight test by NASA - the Controls, Astrophysics, and Structures Experiment in Space (CASES). The system simulator is based on a NASTRAN finite element structural model. A finite number of modes is used to represent the structural dynamics. The system simulator also includes models of the electronics, actuators, sensors, the digital controller, and the internal and external disturbances. Nonlinearities caused by quantization are included in the study to examine tolerance of the procedure to modelling errors. Disturbance and sensor noise is modelled as a Gaussian process. For system identification, the system is excited using sinusoidal inputs at the resonant frequencies of the structure using each actuator. Mode shapes, frequencies, and damping ratios are identified from the unforced response sensor data after each excitation. Then, the excitation data is used to identify the actuator influence coefficients. The results of the individual parameter identification analyses are assembled into an aggregate system model. The control design is accomplished based only on the identified model using multi-input/output linear quadratic Gaussian theory. Its performance is evaluated based on time-to-damp as compared with the uncontrolled structure.

Montgomery, Raymond C.↗
NASA NTRS1990

Intergration of system identification and robust controller designs for flexible structures in space

An approach is developed using experimental data to identify a reduced-order model and its model error for a robust controller design. There are three steps involved in the approach. First, an approximately balanced model is identified using the Eigensystem Realization Algorithm, which is an identification algorithm. Second, the model error is calculated and described in frequency domain in terms of the H(infinity) norm. Third, a pole placement technique in combination with a H(infinity) control method is applied to design a controller for the considered system. A set experimental data from an existing setup, namely the Mini-Mast system, is used to illustrate and verify the approach.

Juang, Jer-Nan↗
NASA NTRS1996

Multipath analysis diffraction calculations

This report describes extensions of the Kirchhoff diffraction equation to higher edge terms and discusses their suitability to model diffraction multipath effects of a small satellite structure. When receiving signals, at a satellite, from the Global Positioning System (GPS), reflected signals from the satellite structure result in multipath errors in the determination of the satellite position. Multipath error can be caused by diffraction of the reflected signals and a method of calculating this diffraction is required when using a facet model of the satellite. Several aspects of the Kirchhoff equation are discussed and numerical examples, in the near and far fields, are shown. The vector form of the extended Kirchhoff equation, by adding the Larmor-Tedone and Kottler edge terms, is given as a mathematical model in an appendix. The Kirchhoff equation was investigated as being easily implemented and of good accuracy in the basic form, especially in phase determination. The basic Kirchhoff can be extended for higher accuracy if desired. A brief discussion of the method of moments and the geometric theory of diffraction is included, but seems to offer no clear advantage in implementation over the Kirchhoff for facet models.

Statham, Richard B.↗
NASA NTRS1996

The Angular Power Spectrum of BATSE 3B Gamma-Ray Bursts

We compute the angular power spectrum C(sub l) from the BATSE 3B catalog of 1122 gamma-ray bursts and find no evidence for clustering on any scale. These constraints bridge the entire range from small scales (which probe source clustering and burst repetition) to the largest scales (which constrain possible anisotropics from the Galactic halo or from nearby cosmological large-scale structures). We develop an analysis technique that takes the angular position errors into account. For specific clustering or repetition models, strong upper limits can be obtained down to scales l approx. equal to 30, corresponding to a couple of degrees on the sky. The minimum-variance burst weighting that we employ is visualized graphically as an all-sky map in which each burst is smeared out by an amount corresponding to its position uncertainty. We also present separate bandpass-filtered sky maps for the quadrupole term and for the multipole ranges l = 3-10 and l = 11-30, so that the fluctuations on different angular scales can be inspected separately for visual features such as localized 'hot spots' or structures aligned with the Galactic plane. These filtered maps reveal no apparent deviations from isotropy.

Tegmark, Max↗
NASA NTRS2000

RFI and SCRIMP Model Development and Verification

Vacuum-Assisted Resin Transfer Molding (VARTM) processes are becoming promising technologies in the manufacturing of primary composite structures in the aircraft industry as well as infrastructure. A great deal of work still needs to be done on efforts to reduce the costly trial-and-error methods of VARTM processing that are currently in practice today. A computer simulation model of the VARTM process would provide a cost-effective tool in the manufacturing of composites utilizing this technique. Therefore, the objective of this research was to modify an existing three-dimensional, Resin Film Infusion (RFI)/Resin Transfer Molding (RTM) model to include VARTM simulation capabilities and to verify this model with the fabrication of aircraft structural composites. An additional objective was to use the VARTM model as a process analysis tool, where this tool would enable the user to configure the best process for manufacturing quality composites. Experimental verification of the model was performed by processing several flat composite panels. The parameters verified included flow front patterns and infiltration times. The flow front patterns were determined to be qualitatively accurate, while the simulated infiltration times over predicted experimental times by 8 to 10%. Capillary and gravitational forces were incorporated into the existing RFI/RTM model in order to simulate VARTM processing physics more accurately. The theoretical capillary pressure showed the capability to reduce the simulated infiltration times by as great as 6%. The gravity, on the other hand, was found to be negligible for all cases. Finally, the VARTM model was used as a process analysis tool. This enabled the user to determine such important process constraints as the location and type of injection ports and the permeability and location of the high-permeable media. A process for a three-stiffener composite panel was proposed. This configuration evolved from the variation of the process constraints in the modeling of several different composite panels. The configuration was proposed by considering such factors as: infiltration time, the number of vacuum ports, and possible areas of void entrapment.

Loos, Alfred C.↗
NASA NTRS2014

The Uncertainty of Biomass Estimates from Modeled ICESat-2 Returns Across a Boreal Forest Gradient

The Forest Light (FLIGHT) radiative transfer model was used to examine the uncertainty of vegetation structure measurements from NASA's planned ICESat-2 photon counting light detection and ranging (LiDAR) instrument across a synthetic Larix forest gradient in the taiga-tundra ecotone. The simulations demonstrate how measurements from the planned spaceborne mission, which differ from those of previous LiDAR systems, may perform across a boreal forest to non-forest structure gradient in globally important ecological region of northern Siberia. We used a modified version of FLIGHT to simulate the acquisition parameters of ICESat-2. Modeled returns were analyzed from collections of sequential footprints along LiDAR tracks (link-scales) of lengths ranging from 20 m-90 m. These link-scales traversed synthetic forest stands that were initialized with parameters drawn from field surveys in Siberian Larix forests. LiDAR returns from vegetation were compiled for 100 simulated LiDAR collections for each 10 Mg · ha(exp -1) interval in the 0-100 Mg · ha(exp -1) above-ground biomass density (AGB) forest gradient. Canopy height metrics were computed and AGB was inferred from empirical models. The root mean square error (RMSE) and RMSE uncertainty associated with the distribution of inferred AGB within each AGB interval across the gradient was examined. Simulation results of the bright daylight and low vegetation reflectivity conditions for collecting photon counting LiDAR with no topographic relief show that 1-2 photons are returned for 79%-88% of LiDAR shots. Signal photons account for approximately 67% of all LiDAR returns, while approximately 50% of shots result in 1 signal photon returned. The proportion of these signal photon returns do not differ significantly (p greater than 0.05) for AGB intervals greater than 20 Mg · ha(exp -1). The 50m link-scale approximates the finest horizontal resolution (length) at which photon counting LiDAR collection provides strong model fits and minimizes forest structure uncertainty in the synthetic Larix stands. At this link-scale AGB greater than 20 Mg · ha(exp -1) has AGB error from 20-50% at the 95% confidence level. These results suggest that the theoretical sensitivity of ICESat-2 photon counting LiDAR measurements alone lack the ability to consistently discern differences in inferred AGB at 10 Mg · ha(exp -1) intervals in sparse forests characteristic of the taiga-tundra ecotone.

LiDAR↗