SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Submillimeter source needs for the NASA astrophysics Submillimeter Intermediate Mission (SMIM) and the Earth Observing System Microwave Limb Sounder (EOS MLS) instrument are presented. Solid state local oscillators using planar devices are planned. State-of-the-art performance for these components is reviewed
Ultralight axionlike particles (ALPs) are compelling dark matter candidates because of their potential to resolve small-scale discrepancies between Λ CDM predictions and cosmological observations. Axion-photon coupling induces a polarization rotation in linearly polarized photons traveling through an ALP field; thus, as the local ALP dark matter field oscillates in time, distant static polarized sources will appear to oscillate with a frequency proportional to the ALP mass. We use observations of the cosmic microwave background from SPT-3G, the current receiver on the South Pole Telescope, to set upper limits on the value of the axion-photon coupling constant g φ γ over the approximate mass range 10 - 22 – 10 - 19 eV , corresponding to oscillation periods from 12 hours to 100 days. For periods between 1 and 100 days ( 4.7 × 10 - 22 eV ≤ m φ ≤ 4.7 × 10 - 20 eV ), where the limit is approximately constant, we set a median 95% C.L. upper limit on the amplitude of on-sky polarization rotation of 0.071 deg. Assuming that dark matter comprises a single ALP species with a local dark matter density of 0.3 GeV / cm 3 , this corresponds to g φ γ < 1.18 × 10 - 12 GeV - 1 × ( m φ 1.0 × 10 - 21 eV ) . These new limits represent an improvement over the previous strongest limits set using the same effect by a factor of ~ 3.8 .
In wide-band microwave receivers of a type now undergoing development, the incoming microwave signals are electronically preamplified, then frequency-up-converted to optical signals that are processed photonically before being detected. This approach differs from the traditional approach, in which incoming microwave signals are processed by purely electronic means. As used here, wide-band microwave receivers refers especially to receivers capable of reception at any frequency throughout the range from about 90 to about 300 GHz. The advantage expected to be gained by following the up-conversion-and-photonic-processing approach is the ability to overcome the limitations of currently available detectors and tunable local oscillators in the frequency range of interest. In a receiver following this approach (see figure), a preamplified incoming microwave signal is up-converted by the method described in the preceeding article. The frequency up-converter exploits the nonlinearity of the electromagnetic response of a whispering gallery mode (WGM) resonator made of LiNbO3. Up-conversion takes place by three-wave mixing in the resonator. The WGM resonator is designed and fabricated to function simultaneously as an electro-optical modulator and to exhibit resonance at the microwave and optical operating frequencies plus phase matching among the microwave and optical signals circulating in the resonator. The up-conversion is an efficient process, and the efficiency is enhanced by the combination of microwave and optical resonances. The up-converted signal is processed photonically by use of a tunable optical filter or local oscillator, and is then detected. Tunable optical filters can be made to be frequency agile and to exhibit high resonance quality factors (high Q values), thereby making it possible to utilize a variety of signal-processing modalities. Therefore, it is anticipated that when fully developed, receivers of this type will be compact and will be capable of both wide-band and narrowband signal processing. Thus, one compact receiver of this type would afford the functionality that, heretofore, could have been obtained only by use of multiple heterodyne microwave receivers.
An effort is presently made to employ Nimbus-7 Scanning Multichannel Microwave Radiometer measurements to estimate the total precipitable water in the atmosphere over the tropical oceans. It is found that these passive microwave measurements, in conjunction with appropriately realistic algorithms, can furnish a data base of global total precipitable water that can serve as an adequate indicator of convection. The long-term variations of outgoing longwave radiation in the tropics demonstrate a close relationship between tropical convections and 40-50 day oscillations. The vertical profile of water vapor may be determined by combining both IR and microwave measurements.
Frequency locking of HCN laser transition at 890 GHz to harmonic of crystal controlled oscillator
The mirror twin Higgs model (MTH) is a solution to the Higgs hierarchy problem that provides well-predicted cosmological signatures with only three extra parameters: the temperature of the twin sector, the abundance of twin baryons, and the vacuum expectation value (VEV) of twin electroweak symmetry breaking. These parameters specify the behavior of twin radiation and the acoustic oscillations of twin baryons, which lead to testable effects on the cosmic microwave background (CMB) and large-scale structure (LSS). While collider searches can only probe the twin VEV, through a fit to cosmological data we show that the existing CMB (Planck18 TTTEEE+lowE+lowT+lensing) and LSS (KV450) data already provide useful constraints on the remaining MTH parameters. Additionally, we show that the presence of twin radiation in this model can raise the Hubble constant H$_{0}$ while the scattering twin baryons can reduce the matter fluctuations S$_{8}$, which helps to relax the observed H$_{0}$ and S$_{8}$ tensions simultaneously. This scenario is different from the typical ΛCDM + ΔN$_{eff}$ model, in which extra radiation helps with the Hubble tension but worsens the S$_{8}$ tension. For instance, when including the SH0ES and 2013 Planck SZ data in the fit, we find that a universe with ≳ 20% of the dark matter comprised of twin baryons is preferred over ΛCDM by ~ 4σ. If the twin sector is indeed responsible for resolving the H$_{0}$ and S$_{8}$ tensions, future measurements from the Euclid satellite and CMB Stage 4 experiment will further measure the twin parameters to O(1 - 10%)-level precision. Our study demonstrates how models with hidden naturalness can potentially be probed using precision cosmological data.
We use the physically consistent tilted spatially flat and untilted non-flat ΛCDM inflation models to constrain cosmological parameter values with the Planck 2015 cosmic microwave background (CMB) anisotropy data and recent SNe Ia measurements, baryonic acoustic oscillations (BAO) data, growth rate observations, and Hubble parameter measurements. The most dramatic consequence of including the four non-CMB data sets is the significant strengthening of the evidence for non-flatness in the non-flat ΛCDM model, from 1.8σ for the CMB data alone to 5.1σ for the full data combination. The BAO data is the most powerful of the non-CMB data sets in more tightly constraining model-parameter values and in favoring a spatially closed universe in which spatial curvature contributes about a percent to the current cosmological energy budget. The untilted non-flat ΛCDM model better fits the large-angle CMB temperature anisotropy angular spectrum and is more consistent with the Dark Energy Survey constraints on the current value of the rms amplitude of mass fluctuations (σ 8 ) as a function of the current value of the nonrelativistic matter-density parameter (Ω m ) but does not provide as good a fit to the smaller-angle CMB temperature anisotropy data, as does the tilted flat-ΛCDM model. Some measured cosmological parameter values differ significantly between the two models, including the reionization optical depth and the baryonic matter density parameter, both of whose 2σ ranges (in the two models) are disjointed or almost so.
Measurements were made of the stability of time transfer by the IRIG-B code over a dedicated telephone link on a microwave system. The short and long term Allan Variance was measured on both types of microwave system, one of which is synchronized, the other having free local oscillators. The results promise a time transfer accuracy of 10 microns. The paper also describes a prototype slave clock designed to detect interference in the IRIG-B code to ensure local time is kept during such interference.
Theoretical and applications aspects of optoelectronic control for microwave devices are examined in an introduction for graduate engineering students and practicing engineers. The basic features of optical MMICs are reviewed, and chapters are devoted to laser diodes, electrooptic modulators, photodetectors, microwave fiber-optic links, optoelectronic switching and gating, optoelectronic microwave signal generation, an optoelectronic switch matrix, optoelectronic switching and modulation of oscillators, and optoelectronic injection-locking and tuning of oscillators. Extensive diagrams, drawings, and graphs are provided.
Two documents discuss a breadboard version of advanced transponders that, when fully developed, would be installed on future spacecraft to fly in deep space. These transponders will be required to be capable of operation on any deepspace- communications uplink frequency channel between 7,145 and 7,235 MHz, and any downlink frequency channel between 8,400 and 8,500 MHz. The document focuses on the design and operation of frequency synthesizers for the receiver and transmitter. Heretofore, frequency synthesizers in deep-space transponders have been based on dielectric resonator oscillators (DROs), which do not have the wide tuning bandwidth necessary to tune over all channels in the uplink or downlink frequency bands. To satisfy the requirement for tuning bandwidth, the present frequency synthesizers are based on voltage-controlled-oscillator (VCO) phase-locked loops (PLLs) implemented by use of monolithic microwave integrated circuits (MMICs) implemented using inGaP heterojunction bipolar transistor (HBT) technology. MMIC VCO PLL frequency synthesizers similar to the present ones have been used in commercial and military applications but, until now, have exhibited too much phase noise for use in deep-space transponders. The present frequency synthesizers contain advanced MMIC VCOs, which use HBT technology and have lower levels of flicker (1/f) phase noise. When these MMIC VCOs are used with high-speed MMIC frequency dividers, it becomes possible to obtain the required combination of frequency agility and low phase noise.
The 10-m wind speed over the ocean can be estimated from microwave brightness temperature measurements recorded by the Special Sensor Microwave Imager (SSMI) instrument mounted on a polar-orbiting spacecraft. Four-year (1988-1991) time series of average daily 1 deg x 1 deg SSMI wind speeds were analyzed at selected sites in the western tropical Pacific Ocean. One- to two-month period wind speed oscillations with amplitudes statistically significant at the 95% confidence level were observed near Kanton, Eniwetok, Guam, and Truk. This is the first report of such an oscillation in SSMI wind speeds.
A power spectral analysis of 285 hr of 2 cm microwave intensity data showed no statistically significant ( 96% confidence) periodicities in the frequency range 1 to 15 mHz. No correlation was found between 2 cm periodicities and solar activity in H alpha, X-ray, and several microwave frequencies. A small shift of power toward higher frequencies in the power spectrum of the 2 cm data was found to be correlated with solar H alpha and X-ray activity. Using the statistical properties of power spectra, an expression for the ratio of the minimum detectable peak-to-peak to ambient temperature at chromospheric heights may be derived. Applied to a model for oscillation bursts in quiescent supergranules, and using the most significant results of experiments to detect the microwave periodicities, this expression yields an upper limit of approximately .0015.
This paper presents an innovative approach to producing energy-dense, carbon–neutral liquid ammonia as a means for carrying energy. This approach synergistically integrates microwave reaction chemistry with novel heterogeneous catalysis that decouples dinitrogen activation from high-temperature and high-pressure reactions, altering reaction pathways and increasing ammonia formation rate. Results presented here demonstrate that ammonia synthesis can be conducted at 280 ? and ambient pressure to achieve ~1 mmol ammonia/g cat/h over supported ruthenium catalyst systems utilizing microwave irradiation. It is further shown that adding promoter ions such as potassium, cerium, and barium significantly improves the ammonia production rate over undoped ruthenium-based catalysts. This effect could be attributed to enhanced dielectric loss processes that lead to stronger microwave absorption by the catalyst. Measurement of the equilibrium constant under microwave conditions showed a higher ammonia yield than under thermal equilibrium conditions for both the iron- and ruthenium-based catalysts. Finally, this study also illustrates the advantages of using a variable-frequency microwave reactor for ambient-pressure ammonia synthesis. Mechanistically, investigators believed that the oscillating electric fields of the radiation can couple with adsorbed nitrogen on the surface and accelerate its dissociation. Since dinitrogen dissociation on the surface is rate limiting, this effectively accelerates the reaction.
Despite their ubiquity, the nature of Dark Matter (DM) and neutrinos remains mysterious. Both are examples of particles which are neutral, stable, and require physics beyond the Standard Model (SM) of particle physics. It is therefore natural to investigate theories which relate them. If DM has more than gravitational interactions, it must not couple very sizably to the Standard Mode (SM) in order to have escaped detection so far. The nature of this coupling (or “portal”) is of paramount importance in determining the optimal experimental search strategies. This proposal aims to focus on the implications of “Hidden Sector” models of new physics where the dominant interaction is from the neutrino-mixing portal. Such scenarios give rise to new neutrino self-interactions and DM-neutrino interactions with a variety of consequences. By undertaking the thorough study of neutrino portal (NP) theories of DM this proposal seeks to achieve the following specific objectives: (1) Expand and deepen the theoretical foundations of self-interacting neutrinos in the early universe with application to sterile neutrino DM, (2) establish theoretical and phenomenological bases for DM-modified neutrino oscillations, (3) establish sensitivity projections for neutrino self-interactions from future IceCube data. The proposed research will intellectually contribute to the physics literature by thoroughly characterizing the consequences of “hidden sector” models incorporating DM and neutrinos. Theoretical consistency and a complete description of their impact on the early universe will constitute one component of this work. As a result of the additional structure in the neutrino sector the detectability of various aspects of neutrino physics will be impacted. This includes modifications to oscillation experiments, ultra-high-energy neutrino telescopes (e.g. IceCube, KM3NET), and Cosmic Microwave Background data. The success of this research proposal will depend on the successful integration of these complementary probes of new physics in the proper context of theoretically motivated scenarios determined from their impact on the early universe.
The development of technology for a 30 GHz low noise receiver utilizing GaAs FET devices exclusively is discussed. This program required single and dual-gate FET devices, low noise FET amplifiers, dual-gate FET mixers, and FET oscillators operating at Ka-band frequencies. A 0.25 micrometer gate FET device, developed with a minimum noise figure of 3.3 dB at 29 GHz and an associated gain of 7.4 dB, was used to fabricate a 3-stage amplifier with a minimum noise figure and associated gain of 4.4 dB and 17 dB, respectively. The 1-dB gain bandwidth of this amplifier extended from below 26.5 GHz to 30.5 GHz. A dual-gate mixer with a 2 dB conversion loss and a minimum noise figure of 10 dB at 29 GHz as well as a dielectric resonator stabilized FET oscillator at 25 GHz for the receiver L0. From these components, a hybrid microwave integrated circuit receiver was constructed which demonstrates a minimum single-side band noise figure of 4.6 dB at 29 GHz with a conversion gain of 17 dB. The output power at the 1-dB gain compression point was -5 dBm.
A summary is presented that introduces the compact microwave cavity used in the hydrogen atomic clock. Special emphasis is placed on derivation of theoretical calculating equations of main parameters of the microwave cavity. A brief description is given of several methods for discriminating the oscillating modes. Experimental data and respective calculated values are also presented.
Power amplifiers comprising InP-based high-electron-mobility transistors (HEMTs) in coplanar-waveguide (CPW) circuits designed for operation at frequencies of hundreds of gigahertz, and a test set for onwafer measurement of their power levels have been developed. These amplifiers utilize an advanced 35-nm HEMT monolithic microwave integrated-circuit (MMIC) technology and have potential utility as local-oscillator drivers and power sources in future submillimeter-wavelength heterodyne receivers and imaging systems. The test set can reduce development time by enabling rapid output power characterization, not only of these and similar amplifiers, but also of other coplanar-waveguide power circuits, without the necessity of packaging the circuits.
A high-efficiency power amplifier that operates in the S band (frequencies of the order of a few gigahertz) utilizes transistors operating under class-D bias and excitation conditions. Class-D operation has been utilized at lower frequencies, but, until now, has not been exploited in the S band. Nominally, in class D operation, a transistor is switched rapidly between "on" and "off" states so that at any given instant, it sustains either high current or high voltage, but not both at the same time. In the ideal case of zero "on" resistance, infinite "off" resistance, zero inductance and capacitance, and perfect switching, the output signal would be a perfect square wave. Relative to the traditional classes A, B, and C of amplifier operation, class D offers the potential to achieve greater power efficiency. In addition, relative to class-A amplifiers, class-D amplifiers are less likely to go into oscillation. In order to design this amplifier, it was necessary to derive mathematical models of microwave power transistors for incorporation into a larger mathematical model for computational simulation of the operation of a class-D microwave amplifier. The design incorporates state-of-the-art switching techniques applicable only in the microwave frequency range. Another major novel feature is a transmission-line power splitter/combiner designed with the help of phasing techniques to enable an approximation of a square-wave signal (which is inherently a wideband signal) to propagate through what would, if designed in a more traditional manner, behave as a more severely band-limited device (see figure). The amplifier includes an input, a driver, and a final stage. Each stage contains a pair of GaAs-based field-effect transistors biased in class D. The input signal can range from -10 to +10 dBm into a 50-ohm load. The table summarizes the performances of the three stages