Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetized plasma”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1965

Experimental Investigation of a Constant-Velocity Traveling Magnetic Wave Plasma Engine

The previously reported traveling magnetic wave plasma engine has been redesigned to reduce the high heat loss to the tube walls downstream of the last magnetic-field coil. The present configuration uses a 3-inch-diameter pyrex tube flared out to a 6-inch diameter immediately downstream of the last magnetic-field coil. This configuration has been studied to determine the effects of flared-tube geometry, molecular weight of the propellant, engine length, and use of a ferrite core on the engine performance. Argon and xenon gases were used as propellants. Two engine lengths were tested. One engine was nominally 1-magnetic-wavelength long (4 coils) and the other nominally 2 1/2-magnetic wavelengths long (10 coils). The magnetic wave speed for both of these lengths corresponds to a specific impulse of 4750 seconds. The maximum kinetic efficiency of the 4-coil engine was 10 percent at a specific impulse of 3200 seconds using argon gas and 22.5 percent at 4200 seconds using xenon gas as the propellant.

TRAVELING WAVE↗
DOE OSTI2021

Plasma Guns for Magnetized Fuel Targets for PJMIF

In plasma jet driven magneto-inertial fusion (PJMIF) an array of discrete supersonic plasma jets is used to form a spherically imploding plasma liner, which then compresses a magnetized plasma target to fusion conditions. With funding from ARPA-E’s ALPHA program and from Strong Atomics LLC, HyperJet Fusion Corp and HyperV Technologies Corp. previously developed the plasma guns required for an experimental demonstration of the plasma liner formation part of the concept. A 36-gun demonstration of an imploding spherical plasma liner is currently underway on the PLX facility at Los Alamos National Laboratory. This present project addresses the next step required for a complete PJMIF concept, i.e. developing the magnetized plasma target. We proposed to form the target by stagnating a number of magnetized plasma jets in the center of the target chamber. This is accomplished by adding a bias field coil to the plasma liner gun to form a magnetized plasma jet. This experimental development took place at HyperJet in a geometry replicating the bias field environment that will be seen on a PLX port so the results are directly transferrable to the PLX experiment. The objective of this effort was the technical development and characterization of a new magnetized plasma jet using a high-performance, high momentum flux, contoured-gap coaxial plasma gun appropriate for use on the next stage of the PLX experiment. Electromagnetic modeling of the coil indicated the coil was best placed around the aluminum tubes of the gun transmission line, rather than around the chamber port as originally proposed. This maximized field strength in the breech and yielded much better flux linkage between gun electrodes. A 30-turn coil was ultimately implemented, allowing long pulses that could diffuse through the metal walls on the timescale of interest. \machtwo modeling predicted that less capacitance in the main PFN could potentially improve plasma jet velocities due to better matching of the current to the smaller plasma mass and the existing electrode contour designed to suppress blowby. This proved true, as testing showed markedly improved performance when the original 600uF bank was reduced to 400uF. A number of diagnostics were built and/or upgraded in order to characterize the plasma jets, inluding laser interferomtery for density, photodiodes for velocity, Bdot probes for magnetic field measurements, a Triple probe for temperature measurements, and spectroscopy for impurity content. A plasma gun with the 30-turn magnet coil installed, a 70% reduction in gas valve plenum volume, and a 33% reduction in main PFN capacitance produced a dense, high velocity, well magnetized plasma jet. We met or exceeded virtually all of the plasma jet parameter goals. Peak velocity of 135 km/s exceeded the 100 km/s goal by 35%, while the peak density of over 1.0x10 15 cm -3 was 3.3 times the goal of >3.0x10 14 cm -3 . Shot-to-shot repeatability is excellent, with a jitter of less than 300ns observed on the arrival fronts of the photodiode signals from one shot to the next. Average plasma jet lengths of 33cm (at 120km/s) were slightly longer than the 20cm goal, but jets as short as 11.8cm were observed at 135km/s. Mass is much higher than the targeted goal, averaging 106ug per shot compared to 20ug. The magnetic field is still a bit lower than desired, with a maximum to date of ~811G, compared to the goal of 1000G. Average values, though, were typically in the 300-450G range, when measured further downstream after some expected in flight decay. Temperature measurements are still a work in progress. Increasing the B field and completing temperature measurements will be continued on into the ongoing BETHE project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Collaborative Research: Advancing the Physics of Magnetized Dusty Plasmas (Final Scientific /Technical Report)

A plasma is a gas of charged particles – electrons and positive ions in roughly equal concentrations. Plasmas are formed by stripping electrons from neutral atoms and molecules. It is believed that the plasma state of matter comprises over 99% of the universe. Often the plasma coexists with small (1/1000 of a millimeter) dust particles. Some of the plasma particles collect on the dust grains which cause it to be electrically charged, and so become an integral part of the plasma, forming what is called a “dusty plasma”. The large objects in the universe (planets, asteroids, comets, stars) are formed by combining dust grains into larger and larger objects, eventually held together by their self-gravitational attraction. Thus, an understanding of the processes that control the structure and evolution of the universe, requires that we understand the behavior of dusty plasmas. These plasmas also often are embedded in magnetic fields which has a strong influence on their structure and behavior. Thus, developing an understanding of dusty plasmas in magnetic fields, so-called magnetized dusty plasmas, is also essential. In addition to the dusty plasmas occurring in nature, dusty plasmas play an important role in many plasma-based technologies, such as the production of semiconductor devices, and in the next generation of clean-and-green-energy producing devices based on nuclear fusion. The purpose of the work performed with funding provided in this grant by the United States Department of Energy was to produce and investigate the physics of magnetized dusty plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Radiative cooling effects on reverse shocks formed by magnetized supersonic plasma flows

We study the structure of reverse shocks formed by the collision of supersonic, magnetized plasma flows driven by an inverse (or exploding) wire array with a planar conducting obstacle. We observe that the structure of these reverse shocks varies dramatically with wire material, despite the similar upstream flow velocities and mass densities. For aluminum wire arrays, the shock is sharp and well-defined, consistent with magneto-hydrodynamic theory. In contrast, we do not observe a well-defined shock using tungsten wires, and instead we see a broad region dominated by density fluctuations on a wide range of spatial scales. We diagnose these two very different interactions using interferometry, Thomson scattering, shadowgraphy, and a newly developed imaging refractometer that is sensitive to small deflections of the probing laser corresponding to small-scale density perturbations. We conclude that the differences in shock structure are most likely due to radiative cooling instabilities, which create small-scale density perturbations elongated along magnetic field lines in the tungsten plasma. These instabilities grow more slowly and are smoothed by thermal conduction in the aluminum plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1978

Magnetic fields, plasmas, and coronal holes: The inner solar system

In situ magnetic field and plasma observations within 1 AU which describe MDH stream flows and Alfvenic fluctuations, the latest theories of those phenomena are discussed. Understanding of streams and fluctuations was enhanced by the acquisition of nearly complete sets of high resolution plasma and magnetic data simultaneously at two or more points by IMPs 6, 7, and 8, Mariner-Venus-Mercury, HELIOS 1, and HELIOS 2. Observations demonstrate that streams can have very thin boundaries in latitude and longitude near the sun. This has necessitated a revision of earlier views of stream dynamics, for it is now clear that magnetic pressure is a major factor in the dynamics of stream in the inner solar system and that nonlinear phenomena are significant much closer to the sun than previously believed. Simultaneous IMP 6, 7, and 8 observations of Alfvenic fluctuations indicate that they are probably not simply transverse Alfven waves and suggest that Alfvenic fluctuations are better described as nonplanar, large-amplitude, general Alfven waves moving through an inhomogeneous and discontinuous medium, and coupled to a compressive mode.

Burlaga, L. F.↗
DOE OSTI2020

Friction in a strongly magnetized neutral plasma

A charged projectile generates an electrostatic wake as it moves through a background plasma. This wake normally gives rise to a drag force that acts antiparallel to the velocity vector of the projectile, and is commonly referred to as the stopping power. A recent theory predicted that an additional component of the friction force that is perpendicular to both the projectile velocity and the Lorentz force arises when a plasma is strongly magnetized. We extend the previous analysis of this transverse friction force, which was based on the one-component plasma model, to treat a two-component charge-neutral electron-ion plasma. The direction and magnitude of the transverse force is found to depend on the projectile speed relative to the electron and ion thermal velocities, and to change sign three times. For projectile speeds below a certain threshold, the transverse force is dominated by collisions with ions, while above this threshold, only electron collisions contribute. Here, the average trajectory of the projectile is significantly altered by the transverse force as it slows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Use of intrinsic hysteresis for the active control of internal transport barriers in magnetically confined fusion plasmas

In magnetically confined fusion devices, control of internal transport barriers (ITBs) is important both to enhance and suppress the turbulent transport to improve confinement control. Barrier control should allow for the improvement of confinement to aid in achieving the needed fusion criteria while also permitting the degradation of confinement to control profiles and clean the device by moving out the impurities accumulated near the core. In this work, we present a novel control scenario that takes advantage of the hysteresis intrinsic to transport barriers to easily cycle through enhanced and degraded confinement regimes. The control scenario is illustrated using a five-field simplified transport model for an ITB using typical parameters of a neutral beam injection-heated DIII-D tokamak discharge. Pellets and ion cyclotron resonance frequency power are used as control knobs for this active control scenario. These knobs adequately modify at will the local gradients and, therefore, the growth rates and shearing rates, allowing for easy and efficient control of the barrier by taking advantage of the barrier hysteresis. The result is a control cycle that could be operated with a relatively small amount of power in high performance regimes which, nowadays, typically require large power to control. It may also have advantages to avoid, or at least ameliorate, the appearance of magnetohydrodynamic instabilities in the barrier region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Magnetized laser–plasma interactions in high-energy-density systems: Parallel propagation

In this study, we investigate parametric processes in magnetized plasmas, driven by a large-amplitude pump light wave. Our focus is on laser–plasma interactions relevant to high-energy-density (HED) systems, such as the National Ignition Facility and the Sandia MagLIF concept. We present a self-contained derivation of a “parametric” dispersion relation for magnetized three-wave interactions, meaning the pump wave is included in the equilibrium, similar to the unmagnetized work of Drake et al., Phys. Fluids 17, 778 (1974). For this, we use a multi-species plasma fluid model and Maxwell's equations. The application of an external B field causes right- and left-polarized light waves to propagate with differing phase velocities. This leads to Faraday rotation of the polarization, which can be significant in HED conditions. Phase-matching and linear wave dispersion relations show that Raman and Brillouin scattering have modified spectra due to the background B field, though this effect is usually small in systems of current practical interest. We study a scattering process we call stimulated whistler scattering, where a light wave decays to an electromagnetic whistler wave (ω≲ω ce ) and a Langmuir wave. This only occurs in the presence of an external B field, which is required for the whistler wave to exist.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1997

Exterior and Interior Polar Cusps: Observations from Hawkeye

Hawkeye plasma, magnetic field, and plasma wave instruments directly sampled the throat of the northern polar cusp as the orientation of the Interplanetary Magnetic Field (IMF) changed from southward to northward on July 3, 1974. Two distinct regions in the polar cusp were identified based on magnetic field, plasma flow and magnetic and electric noise: the interior and exterior cusps. The observations show highly variable flows in the exterior portion of the cusp and constantly strong dawn-dusk flows in the interior portion during periods of strong IMF By component. Results of a minimum variance analysis of the magnetic field at each cusp interface crossing provides evidence that the magnetopause surface normal deviated highly from empirical models. During intervals of relatively steady solar wind dynamic pressure, the motion of the cusp relative to the slow moving spacecraft was modulated by the varying IMF clock angle as observed by IMP 8 in the upstream solar wind. The motion did not show a correlation with internal processes monitored by the A E index. We propose that observed plasma flow patterns and cusp motion are results of reconnection between the IMF and the magnetospheric magnetic field. Flow velocity observed in the interior cusp is consistent with stress balance for a reconnection process. This unique interval provides an opportunity for detailed studies of the plasma, magnetic field, and plasma wave properties in both the exterior and interior cusp.

Chen, S.-H.↗
NASA NTRS1989

Small scale irregularities in Comet Halley's plasma mantle - An attempt at self-consistent analysis of plasma and magnetic field data

VEGA-1 measurements of the plasma density and magnetic field in the coma of Comet Halley show characteristic signatures over a significant portion of the outbound pass. It is found that the assumption that there is a balance between the thermal and magnetic pressures in these features can be used to obtain estimates of the plasma temperature as a function of distance from the nucleus. These estimates indicate that the ions cool from about 1.5 x 10 to the 6th K at 10 to the 5th km to 2 x 10 to the 5th K at 5 x 10 to the 4th km. The technique used here represents a novel approach whereby temperature measurements can be made in situations where only plasma density and magnetic field data are available.

Vaisberg, O. L.↗
DOE OSTI2020

From Interstellar Cloud to Star to Laboratory: Frontier HEDP Studies of Magnetized Colliding Plasma Flows with Strong Radiative Cooling (Final Report)

High-speed flows of gas are the norm in astrophysics where exploding stars, winds from the regions around black holes and streams of galactic material create “supersonic flows”. As the flows collide, strong shock waves are formed where gas is compressed and heated. The regions behind these shock waves are of great interest to scientists. New stars can form in these shock regions in the context of galaxies. In the context of planets like our Earth, the shocks waves come from the interaction of the solar wind with our planets’ magnetic field causing Aurora and placing astronauts and satellites in jeopardy. Thus, understanding supersonic flows of magnetized plasmas is essential for progress in many fields of astronomy and space physics (relevant to planets and the Earth). Remarkably, we can also create these kinds of flows in the laboratory using Z-pinches and laser driven experiments that include magnetic fields. The exploration of these forms of “High Energy Density Physics” (HEDP) flows is also critical in order to achieve Inertial Confinement Fusion, which is a step towards developing a sustainable source of Fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗