Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC FLUX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Magnetic Flux Emergence and Decay Rates for Preceder and Follower Sunspots Observed with HMI

We quantify the emergence and decay rates of preceder (p) and follower (f) sunspots within 10 active regions from 2010 to 2014 using Space-weather Helioseismic Magnetic Imager Active Region Patch data. The sunspots are small to mid-sized regions and contain a signed flux within a single polarity sunspot of (1.1--6.5)×10{sup 21} Mx. The net unsigned flux within the regions, including plage, ranges from (5.1--20)×10{sup 21} Mx. Rates are calculated with and without intensity contours to differentiate between sunspot formation and flux emergence. Signed flux emergence rates, calculated with intensity contours, for the p (f) spots average 6.8(4.9)×10{sup 19} Mx hr{sup −1}, while decay rates are −1.9(−3.4)×10{sup 19} Mx hr{sup −1}. The mean, signed flux emergence rate of the regions, including plage, is 7.1×10{sup 19} Mx hr{sup −1}, for a mean peak flux of 5.9×10{sup 21} Mx. Using a synthesis of these results and others reported previously, there is a clear trend for larger flux regions to emerge faster than smaller ones. Observed emergence rates (dϕ/dt, Mx hr{sup −1}) scale with total signed peak flux, ϕ-tilde {sub max}, as a power law with an exponent of 0.36, i.e., dϕ/dt=A ϕ-tilde {sub max}{sup 0.36}. The observed rates may assist in constraining the boundary and initial conditions in simulations which already demonstrate increased rates for flux tubes with higher buoyancy and twist, or in the presence of a strong upflow. Overall, the observed emergence rates are smaller than those in simulations, which may indicate a slower rise of the flux in the interior than what is captured in simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation of magnetic flux transport and shock formation in a staged Z-pinch

Target preheating is an integral component of magnetized inertial fusion in reducing convergence ratio. In the staged Z-pinch concept, it is achieved via one or more shocks. Previous work [Narkis et al., Phys. Plasmas 23, 122706 (2016)] found that shock formation in the target occurred earlier in higher-Z liners due to faster flux transport to the target/liner interface. However, a corresponding increase in magnitude of magnetic pressure was not observed, and target implosion velocity (and therefore shock strength) remained unchanged. To investigate other means of increasing the magnitude of transported flux, a Korteweg-de Vries-Burgers equation from the 1-D single-fluid, resistive magnetohydrodynamic equations is obtained. Solutions to the nondispersive (i.e., Burgers) equation depend on nondimensional coefficients, whose dependence on liner density, temperature, etc., suggests an increase in target implosion velocity, and therefore shock strength, can be obtained by tailoring the mass of a single-liner gas puff to a double-liner configuration. In the selected test cases of 1-D simulated implosions of krypton on deuterium, the peak Mach number increased from ∼5 to ∼8. While a notable increase was seen, Mach numbers exceeding 10 (implosion velocities exceeding ∼25 cm/μs) are necessary for adequate shock preheating.

Narkis, J. (ORCID:0000000154368933)↗

SIMULATING THE 'SLIDING DOORS' EFFECT THROUGH MAGNETIC FLUX EMERGENCE

Recent Hinode photospheric vector magnetogram observations have shown that the opposite polarities of a long arcade structure move apart and then come together. In addition to this 'sliding doors' effect, orientations of horizontal magnetic fields along the polarity inversion line on the photosphere evolve from a normal-polarity configuration to an inverse one. To explain this behavior, a simple model by Okamoto et al. suggested that it is the result of the emergence of a twisted flux rope. Here, we model this scenario using a three-dimensional megnatohydrodynamic simulation of a twisted flux rope emerging into a pre-existing overlying arcade. We construct magnetograms from the simulation and compare them with the observations. The model produces the two signatures mentioned above. However, the cause of the 'sliding doors' effect differs from the previous model.

79 ASTRONOMY AND ASTROPHYSICS↗

MAGNETIC FLUX EXPULSION IN SUPERCONDUCTING RADIO-FREQUENCY NIOBIUM CAVITIES MADE FROM COLD WORKED NIOBIUM

Trapped residual magnetic field during the cool down of superconducting radio frequency (SRF) cavities is one of the primary sources of RF residual losses leading to lower quality factor. Historically, SRF cavities have been fabricated from high purity fine grain niobium with grain size ~50 to 100 µm as well as large grain with grain size of the order of few centimeters. Non-uniform recrystallization of fine-grain Nb cavities after the post fabrication heat treatment leads to higher flux trapping during the cool down, and hence the lower quality factor. We fabricated two 1.3 GHz single cell cavities from cold-worked niobium from different vendors and processed along with cavities made from SRF grade Nb. The flux expulsion and flux trapping sensitivity were measured after successive heat treatments in the range 800 to 1000°C. The flux expulsion from cold-worked fine-grain Nb cavities improves after 800°C/3h heat treatments and it becomes similar to that of standard fine-grain Nb cavities when the heat treatment temperature is higher than 900°C.

Khanal, B. D.↗

MAGNETIC FLUX EXPULSION IN SUPERCONDUCTING RADIO-FREQUENCY NIOBIUM CAVITIES MADE FROM COLD WORKED NIOBIUM

Trapped residual magnetic field during the cool down of superconducting radio frequency (SRF) cavities is one of the primary sources of RF residual losses leading to lower quality factor. Historically, SRF cavities have been fabricated from high purity fine grain niobium with grain size ~50 to 100 µm as well as large grain with grain size of the order of few centimeters. Non-uniform recrystallization of fine-grain Nb cavities after the post fabrication heat treatment leads to higher flux trapping during the cool down, and hence the lower quality factor. We fabricated two 1.3 GHz single cell cavities from cold-worked niobium from different vendors and processed along with cavities made from SRF grade Nb. The flux expulsion and flux trapping sensitivity were measured after successive heat treatments in the range 800 to 1000°C. The flux expulsion from cold-worked fine-grain Nb cavities improves after 800°C/3h heat treatments and it becomes similar to that of standard fine-grain Nb cavities when the heat treatment temperature is higher than 900°C.

Khanal, B. D.↗

Residual loss due to magnetic flux trapping in niobium superconducting microwave cavities

One of the significant source of radio frequency loss in superconducting microwave cavities is the trapped residual magnetic field during the cooldown due to the incomplete Messier effect. The sensitivity of flux trapping depends on the distribution of impurities, network of dislocations and defects which pin vortices. Recent advancement in cavity processing techniques resulted in very high quality factors with impurity doping, however the rf loss related to the flux trapping increases. High quality factor in SRF cavities is not only limited to particle accelerators but also emerging as an application to quantum computing and quantum information science. In this presentation, we present the results of measurements of flux trapping sensitivity on several 1.3 GHz elliptical accelerating cavities with different grain size, impurity content and surface preparations.

Dhakal, P.↗

Triode for Magnetic Flux Quanta

In an electronic triode, the electron current emanating from the cathode is regulated by the electric potential on a grid between the cathode and the anode. Here we demonstrate a triode for single quantum magnetic field carriers, where the flow of individual magnetic vortices in a superconducting film is regulated by the magnetic potential of striae of soft magnetic strips deposited on the film surface. By rotating an applied in-plane field, the magnetic strip potential can be varied due to changes in the magnetic charges at the strip edges, allowing accelerated or retarded motion of magnetic vortices inside the superconductor. Scaling down our design and reducing the gap width between the magnetic stripes will enable controlled manipulation of individual vortices and creation of single flux quantum circuitry for novel high-speed low-power superconducting electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gas Gun-Configured Magnetic Flux Compression Generator, NLV-013-17, Year 1 of 3

Presentation on project to explore the concept of achieving current amplification by principles of high-explosive magnetic compression generation but without high explosives and demonstrate that a gas gun or launcher could be configured to provide the input energy and action necessary for magnetic compression generation performance in a more controlled, cost-effective manner with improved safety.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Three-wave coupling observed between a shear Alfvén wave and a kink-unstable magnetic flux rope

Results from a laboratory experiment are presented in which, for the first time, a shear Alfvén wave is launched using an antenna in a current-carrying plasma column that is tailored to be either stable or unstable to the kink oscillation. As the plasma is driven kink unstable, the frequency power spectrum of the Alfvén wave evolves from a single peak to a peak with multiple sidebands separated by integer multiples of the kink frequency. The main sidebands (one on either side of the launched wave peak in the power spectrum) are analyzed using azimuthal wavenumber matching, perpendicular and parallel wavenumber decomposition, and bispectral time series analysis. The dispersion relation and three-wave matching conditions are satisfied, given each sideband is a propagating Alfvén wave that results from the interaction of the pump Alfvén wave and the co-propagating component of a half-wavelength, standing kink mode. The interaction is shown to generate smaller perpendicular wavelength Alfvén waves that drive energy transport to scales that will approach the dissipation scale of k⊥ρs=1, with k⊥ being the perpendicular wavenumber and ρs being the ion gyroradius at the electron temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Field of first magnetic flux entry and pinning strength of superconductors for rf application measured with muon spin rotation

Here, the performance of superconducting radiofrequency (SRF) cavities used for particle accelerators depends on two characteristic material parameters: field of first flux entry H entry and pinning strength. The former sets the limit for the maximum achievable accelerating gradient, while the latter determines how efficiently flux can be expelled related to the maximum achievable quality factor. In this paper, a method based on muon spin rotation (μSR) is developed to probe these parameters on samples. It combines measurements from two different spectrometers, one being specifically built for these studies and samples of different geometries. It is found that annealing at 1400°C virtually eliminates all pinning. Such an annealed substrate is ideally suited to measure H entry of layered superconductors, which might enable accelerating gradients beyond bulk niobium technology.

43 PARTICLE ACCELERATORS↗