Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC FIELD INTENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Design and assembling status of the Mu2e electromagnetic calorimeter mechanical structures

The muon-to-electron conversion (Mu2e) experiment at Fermilab will search for the Charged Lepton Flavour Violating neutrino-less coherent conversion of a muon into an electron in the field of an aluminum nucleus. The observation of this process would be the unambiguous evidence of physics beyond the Standard Model. The detector has been designed as a state-of-the-art crystal calorimeter and employs 1348 pure Cesium Iodide (CsI) crystals readout by UV-extended silicon photosensors and fast front-end and digitization electronics. A design consisting of two identical annular matrices (named disks ) positioned at the relative distance of 70 cm, downstream the aluminum target along the muon beamline, satisfies the Mu2e physics requirements. The hostile Mu2e operational conditions, in terms of radiation levels (total ionizing dose of 12 krad and a neutron fluence of 5 10^{10} n/cm2 @ 1 MeVeq (Si)/y), magnetic field intensity (1 T) and vacuum level (10−4 Torr) have posed tight constraints on the design of the detector mechanical structures and materials choice. The support structure of the two 674 crystal matrices employs two aluminum hollow rings and parts made of open- cell vacuum-compatible carbon fiber. The photosensors and service front-end electronics for each crystal are assembled in a unique mechanical unit inserted in a machined copper holder. The 674 units are supported by a machined plate made of vacuum-compatible plastic material. The plate also integrates the cooling system made of a network of copper lines flowing a low temperature radiation-hard fluid and placed in thermal con- tact with the copper holders. The data acquisition electronics is hosted in aluminum custom crates positioned on the external lateral surface of the two disks. The crates also integrate the electronics cooling system. In this poster we will review the constraints on the calorimeter mechanical structures, the technological choices, and the status of assembling at Fermilab.

Pasciuto, D.↗

Development, construction and qualification tests of the mechanical structures of the electromagnetic calorimeter of the Mu2e experiment at Fermilab

The “muon-to-electron conversion” (Mu2e) experiment at Fermilab will search for the Charged Lepton Flavour Violating neutrino-less coherent conversion of a muon into an electron in the field of an aluminum nucleus. The observation of this process would be the unambiguous evidence of physics beyond the Standard Model. Mu2e detectors comprise a straw-tracker, an electromagnetic calorimeter and an external veto for cosmic rays. The calorimeter provides excellent electron identification, complementary information to aid pattern recognition and track reconstruction, and a fast calorimetric online trigger. The detector has been designed as a state-of-the-art crystal calorimeter and employs 1340 pure Cesium Iodide (CsI) crystals readout by UV-extended silicon photosensors and fast front-end and digitization electronics. A design consisting of two identical annular matrices (named “disks”) positioned at the relative distance of 70 cm downstream the aluminum target along the muon beamline satisfies the Mu2e physics requirements.The hostile Mu2e operational conditions, in terms of radiation levels (total ionizing dose of 12 krad and a neutron fluence of 5x1010 n/cm2 @ 1 MeVeq (Si)/y), magnetic field intensity (1 T) and vacuum level (10$^{-4}$ Torr) have posed tight constraints on the design of the detector mechanical structures and materials choice. The support structure of the two 670 crystal matrices employs two aluminum hollow rings and parts made of open-cell vacuum-compatible carbon fiber. The photosensors and service front-end electronics for each crystal are assembled in a unique mechanical unit inserted in a machined copper holder. The 670 units are supported by a machined plate made of vacuum-compatible plastic material. The plate also integrates the cooling system made of a network of copper lines flowing a low temperature radiation-hard fluid and placed in thermal contact with the copper holders to constitute a low resistance thermal bridge. The data acquisition electronics is hosted in aluminum custom crates positioned on the external lateral surface of the two disks. The crates also integrate the electronics cooling system as lines running in parallel to the front-end system.The constraints on the calorimeter mechanical structures design, the development from the conceptual design to the specifications of all the structural components, the status of components production and the components quality assurance tests are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Detection and Aggregation of Listeria Monocytogenes Using Polyclonal Antibody Gold-Coated Magnetic Nanoshells Surface-Enhanced Raman Spectroscopy Substrates

Magnetic nanoshells with tailored surface chemistry can enhance bacterial detection and separation technologies. This work demonstrated a simple technique to detect, capture, and aggregate bacteria with the aid of end-functionalized polyclonal antibody gold-coated magnetic nanoshells (pAb-Lis-AuMNs) as surface-enhanced Raman spectroscopy (SERS) probes. Listeria monocytogenes were used as the pathogenic bacteria and the pAb-LisAuMNs, 300 nm diameter, were used as probes allowing facile magnetic separation and aggregation. An optimized covalent bioconjugation procedure between the magnetic nanoshells and the polyclonal antibody was performed at pH six via a carbodiimide crosslinking reaction. Spectroscopic and morphological characterization techniques confirmed the fabrication of stable pAb-Lis-AuMNs. The resulting pAb-Lis-AuMNs acted as a SERS probe for L. monocytogenes based on the targeted capture via surface binding interactions and magnetically induced aggregation. Label-free SERS measurements were recorded for the minimum detectable amount of L. monocytogenes based on the SERS intensity at the 1388 cm -1 Raman shift. L. monocytogenes concentrations exhibited detection limits in the range of 10 4 –10 7 CFU ml -1 , before and after aggregation. By fitting these concentrations, the limit of detection of this method was ~10 3 CFU ml -1 . Using a low-intensity magnetic field of 35 G, pAb-LisAuMNs aggregated L. monocytogenes as demonstrated with microscopy techniques, including SEM and optical microscopy. Overall, this work presents a label-free SERS probe method comprised of a surface-modified polyclonal antibody sub-micron magnetic nanoshell structures with high sensitivity and magnetic induced separation that could lead to the fabrication of multiple single-step sensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetized Winds of M-type Stars and Star–Planet Magnetic Interactions: Uncertainties and Modeling Strategy

M-type stars are the most common stars in the Universe. They are ideal hosts for the search of exoplanets in the habitable zone (HZ), as their small size and low temperature make the HZ much closer-in than their solar twins. Harboring very deep convective layers, they also usually exhibit very intense magnetic fields. Understanding their environment, in particular their coronal and wind properties, is thus very important, as they might be very different from what is observed in the solar system. The mass-loss rate of M-type stars is poorly known observationally, and recent attempts to estimate it for some of them (e.g., TRAPPIST-1 and Proxima Centauri) can vary by an order of magnitude. In this work, we revisit the stellar wind properties of M dwarfs in the light of the latest estimates of $\dot{M}$ through Lyα absorption at the astropause and slingshot prominences. We outline a modeling strategy to estimate the mass-loss rate, radiative loss, and wind speed, with uncertainties, based on an Alfvén-wave-driven stellar wind model. We find that it is very likely that several TRAPPIST-1 planets lie within the Alfvén surface, which implies that these planets experience star–planet magnetic interactions (SPMIs). We also find that SPMIs between Proxima Cen b and its host star could be the reason for recently observed radio emissions.

M stars↗

Maser theory of pulsar radiation

Pulsar radio emission via maser amplification, presenting model based on electrons behavior in intense magnetic field

Chiu, H.-Y.↗

On the diamagnetic effect of the plasma sheet near 60 earth radii.

The two-dimensional (YZ plane) spatial distribution of magnetic field magnitudes in the geomagnetic tail at the lunar distance is given in both the solar magnetospheric and the neutral-sheet coordinate systems by using three years of data from the Ames magnetometer on Explorer 35. The effect of changes in geomagnetic activity is also presented. In the magnetotail near 60 earth radii, a broad region in which the magnetic field intensity is relatively weak in comparison with that in the other region of the tail is located adjacent to the solar magnetospheric equatorial plane and the calculated neutral sheet. This depression of the field due to the diamagnetic effect of the plasma sheet is more evident during times of minimum geomagnetic activity.-

Meng, C.-I.↗

Ion cyclotron waves observed in the polar cusp.

During the penetration by Ogo 5 of the low-latitude disturbed polar cusp region on Nov. 1, 1968, while a major magnetic storm was in progress, a variety of plasma wave activity was observed. Observations of waves with amplitudes less than 2% of the background magnetic field intensity and having frequencies between approximately 0.67 and 0.87 times the local proton gyrofrequency are described. The polarization of these waves indicates that they are propagating at an appreciable angle to the local geomagnetic field line direction. The source of these waves has not been determined, but currents and gradient drifts are suggested as possible agents.

Fredricks, R. W.↗

The solar wind cycle, the sunspot cycle, and the corona.

Recent theories of the solar cycle and of coronal heating strongly suggest that solar cycle variations of different quantities (i.e., sunspots, coronal green line, etc.) ought not to be expected to be in phase with one another. In agreement with this notion it is noted that the shape of the corona typical of a 'maximum' eclipse occurs 1.5 yr before sunspot maximum, compared with 2 yr as might be expected from Leighton's 'standard' model. Further, it is argued that the phase of the solar wind cycle can be determined from geomagnetic observations. Using this phase, a solar cycle variation of 100 km/sec in the solar wind velocity and 1 gamma in the magnetic field intensity becomes apparent. In general, the solar wind cycle lags behind the coronal-eclipse-form cycle by 3 yr, compared with the 2 yr that might be expected from model calculations.

Hirshberg, J.↗

White dwarfs as infrared sources in the galactic centre.

It is shown that quantized magnetic bremsstrahlung radiation in intense magnetic fields from the surface layers of white dwarfs could serve as one of the possible explanations for the infrared emission from the center of the galaxy that has been detected by Hoffmann et al. (1971). It is assumed, in particular, that the infrared radiation is from clusters of white dwarfs.

Chow, T. L.↗

Diagnostics of seeded RF plasmas: An experimental study related to the gaseous core reactor

Measurements of the temperature profiles in an RF argon plasma were made over magnetic field intensities ranging from 20 amp turns/cm to 80 amp turns/cm. The results were compared with a one-dimensional numerical treatment of the governing equations and with an approximate closed form analytical solution that neglected radiation losses. The average measured temperatures in the plasma compared well with the numerical treatment, though the experimental profile showed less of an off center temperature peak than predicted by theory. This may be a result of the complex turbulent flow pattern present in the experimental torch and not modeled in the numerical treatment. The radiation term cannot be neglected for argon at the power levels investigated. The closed form analytical approximation that neglected radiation led to temperature predictions on the order of 1000 K to 2000 K higher than measured or predicted by the numerical treatment which considered radiation losses.

Thompson, S. D.↗

Variable-beamwidth monopulse antennas

The merits of nine methods for zooming microwave amplitude-sensing monopulse antenna patterns are discussed. Of these, six are directly related to the TDRSS (Tracking Data Relay Satellite System) and are compatible with a deployable-mesh pseudo-paraboloidal main reflector. The remaining three methods utilize radically different geometrical configurations that depart considerably from the TDRSS parameters existing at this time. Preservation of the monopulse postulates is considered to be of prime importance for any variable-beamwidth candidate, however, it is allowed that approximate satisfaction of the postulates should be accepted for practical reasons. All of the methods discussed admit free choice of the polarization state, and the zooming function is never predicated on polarization. Exploration of the zooming techniques was carried out almost entirely by means of the Kirchhoff-Kottler vector diffraction program. The program generates electric and magnetic field intensity, associated phase, and time-average Poynting vector power flow in the intermediate near-field and far-field zones in both receive and transmit modes of operation. A few of the concepts have been verified experimentally with excellent agreement between theory and practice.

Schmidt, R. F.↗

Investigation of the association of magnetopause instability with interplanetary sector structure

The variation of the solar wind parameters (speed, magnetic field intensity, and proton density) and geomagnetic disturbance with location within the interplanetary sector structure is well established. The Kelvin-Helmholtz instability of the magnetopause provides a mechanism for the initiation of worldwide geomagnetic disturbance. Since the Kelvin-Helmholtz mechanism depends on an integration of several of the solar wind parameters, it was considered of interest to see how it varies within the sector structure. Support is given to the idea that the integration of the solar wind parameters via Kelvin-Helmholtz instability is an important concept in understanding geomagnetic disturbance.

Boller, B. R.↗

Microscale Alfven waves in the solar wind at 1 AU

Analysis of IMP 1 (Explorer 43) plasma and magnetic field fluctuations on a scale of one hour revealed that linearly and circularly polarized Alfven waves are rarely present in the solar wind at 1 AU. The most prevalent microscale fluctuations appeared to be large-amplitude Alfven waves with small but non-zero fluctuations in the magnetic field intensity. These waves are present about 40% of the time and are predominantly propagating away from the sun.

Burlaga, L. F.↗

Solar radio continuum storms and a breathing magnetic field model

Radio noise continuum emissions observed in metric and decametric wave frequencies are, in general, associated with actively varying sunspot groups accompanied by the S-component of microwave radio emissions. These continuum emission sources, often called type I storm sources, are often associated with type III burst storm activity from metric to hectometric wave frequencies. This storm activity is, therefore, closely connected with the development of these continuum emission sources. It is shown that the S-component emission in microwave frequencies generally precedes, by several days, the emission of these noise continuum storms of lower frequencies. In order for these storms to develop, the growth of sunspot groups into complex types is very important in addition to the increase of the average magnetic field intensity and area of these groups. After giving a review on the theory of these noise continuum storm emissions, a model is briefly considered to explain the relation of the emissions to the storms.

Source record↗