Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LiDAR analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Multiwavelength LIDAR for remote sensing of chlorophyll A in algae and phytoplankton

A theoretical and experimental analysis of laser induced fluorescence for remote detection of chlorophyll A in living algae and phytoplankton is presented. The fluorescent properties of various species of algae representative of the different color groups are described. Laboratory measurements of fluorescent scattering cross sections is discussed and quantitive data presented. A scattering matrix model is developed to demonstrate the essential requirement of multiwavelength laser excitation in order to make accurate quantitative measurements of chlorophyll A concentration when more than one color group of algae is present in the water. A practical airborne laser fluorosensor design is considered and analysis of field data discussed. Successful operation of the Langley ALOPE (airborne LIDAR oceanographic probing experiment) system is described and field measurements presented. Accurate knowledge of alpha, the optical attenuation coefficient of the water, is shown to be essential for quantitative analysis of chlorophyll A concentration. The feasibility of remotely measuring alpha by laser radar is discussed.

Mumola, P. B.↗

Doppler lidar results from the San Gorgonio Pass experiments

During FY-84, the Doppler Lidar data from the San Gorgonio Pass experiments were analyzed, evaluated, and interpreted with regard to signal strength, signal width, magnitude and direction of velocity component and a goodness parameter associated with the expected noise level of the signal. From these parameters, a screening criteria was developed to eliminate questionable data. For the most part analysis supports the validity of Doppler Lidar data obtained at San Gorgonio Pass with respect to the mean velocity magnitude and direction. The question as to whether the Doppler width could be interpreted as a measure of the variance of the turbulence within the Doppler Lidar System (DLS) focal volume was not resolved. The stochastic nature of the Doppler broadening from finite residence time of the particles in the beam as well as other Doppler broadening phenomenon tend to mask the Doppler spread associated with small scale turbulence. Future tests with longer pulses may assist in better understanding.

Cliff, W. C.↗

Profiling of Mars Atmospheric Carbon Dioxide Isotopologues Using 2-Micron Orbiting Lidar

Mars atmospheric characterization is important for investigating the planet climate history and planning future missions. A feasibility study for implementing the 2-um lidar technology for measuring Martian atmospheric carbon dioxide isotopologues is presented in this paper. Instrument reconfigurations include transmitted wavelengths and detection for differential absorption lidar application using an orbiter platform. Spectral analysis focused on the major four carbon dioxide isotopologues using the 2035 nm wavelength range, which results in minimal interference from other molecular species. Lidar simulation indicated the capability of detecting 12C16O2, 13C16O2, and 18O12C16O near surface vertical profiles up to 20 km altitude. Sensing of 17O12C16O isotopologue is challenging due to lower abundance and Martian atmospheric dust. This orbiting lidar provides a valuable tool for future Mars missions.

Tamer F. Refaat↗

Profiling of Mars Atmospheric Carbon Dioxide Isotopologues Using 2-Micron Orbiting Lidar

Mars atmospheric characterization is important for investigating the planet climate history and planning future missions. A feasibility study for implementing the 2-um lidar technology for measuring Martian atmospheric carbon dioxide isotopologues is presented in this paper. Instrument reconfigurations include transmitted wavelengths and detection for differential absorption lidar application using an orbiter platform. Spectral analysis focused on the major four carbon dioxide isotopologues using the 2035 nm wavelength range, which results in minimal interference from other molecular species. Lidar simulation indicated the capability of detecting 12C16O2, 13C16O2, and 18O12C16O near surface vertical profiles up to 20 km altitude. Sensing of 17O12C16O isotopologue is challenging due to lower abundance and Martian atmospheric dust. This orbiting lidar provides a valuable tool for future Mars missions.

Tamer F. Refaat↗

Data from "A Bayesian Record Linkage Approach to Applications in Tree Demography Using Overlapping LiDAR Scans"

Processed LiDAR data and environmental covariates from 2015 and 2019 LiDAR scans in the Vicinity of Snodgrass Mountain (Western Colorado, USA), in a geographic subset used in primary analysis for the research paper.This package contains LiDAR-derived canopy height maps for 2015 and 2019, crown polygons derived from the height maps using a segmentation algorithm, and environmental covariates supporting the model of forest growth. Source datasets include August 2015 and August 2019 discrete-return LiDAR point clouds collected by Quantum Geospatial for terrain mapping purposes on behalf of the Colorado Hazard Mapping Program and the Colorado Water Conservation Board. Both datasets adhere to the USGS QL2 quality standard. The point cloud data were processed using the R package lidR to generate a canopy height model representing maximum vegetation height above the ground surface, using a pit-free algorithm.This dataset was compiled to assess how spatial patterns of tree growth in montane and subalpine forests are influenced by water and energy availability. Understanding these growth patterns can provide insight into forest dynamics in the Southern Rocky Mountains under changing climatic conditions.This dataset contains .tif, .csv, and .txt files. This dataset additionally includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata; and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type.

54 ENVIRONMENTAL SCIENCES↗

Sampling and Representativeness for a Spaceborne Wind Lidar

The capability of an Earth-orbiting lidar to produce a reliable windfield sampling with an error of 1-3 ms(exp -1) and that is relevant to numerical forecasting and climate studies is discussed. The spatial and temporal resolutions range from 100 km to 1000 km and 3 hr to 1 month respectively. In this respect cloud obstruction is of great concern, as it can prevent the lidar probing whole parts of the atmosphere, for both short and long periods of time. A worldwide analysis of cloudiness from either visual observations made from the ground or else from the Stratospheric Aerosol and Gas Experiment (SAGE) instrument, has shown that the average cloud cover is 60 percent. This analysis is only valid at large scales (time and space) compatible with the currently operating satellites. However, a lidar footprint is only about a hundred meters or less, and it was observed from ground based lidars that, even when the cloudiness is 100 percent, some lidar shots get through. A complete analysis of the probability of probing through clouds by a spaceborne lidar is presently beyond our capacities. Hence, no small scale cloudiness data set is yet available representing all kinds of meteorological situations at all latitudes.

Lieutaud, F.↗

Complementarity of UV and IR differential absorption lidar for global measurements of atmospheric species

An analysis of the potential capabilities of a spectrally diversified DIAL technique for monitoring atmospheric species is presented assuming operation from an earth-orbiting platform. Emphasis is given to the measurement accuracies and spatial and temporal resolutions required to meet present atmospheric science objectives. The discussion points out advantages of spectral diversity to perform comprehensive studies of the atmosphere; in general it is shown that IR systems have an advantage in lower atmospheric measurements, while UV systems are superior for middle and upper atmospheric measurements.

Megie, G.↗

Spectral Analysis of Vibrational Harmonic Motion by use of a Continuous-Wave CO2 Doppler Lidar

Vibrational motion of a harmonic oscillator was investigated using a focused continuous wave CO2 Doppler lidar at 9.1 microns wavelength. A continuum of frequencies along with many discrete, equally spaced, resonant frequency modes was observed. The frequency modes are similar in structure to the oscillatory longitudinal modes of a laser cavity and arise because of interference of the natural resonant frequency of the oscillator with specific frequencies within the continuum. The spectra revealed departures from linear motion for vigorous vibrations of the oscillator. Each consecutive resonant frequency mode occurred for a movement of the oscillator much less than the wavelength of incident lidar radiation.

Jarzembski, Maurice A.↗

NASA Tech Briefs, March 2014

Topics include: Data Fusion for Global Estimation of Forest Characteristics From Sparse Lidar Data; Debris and Ice Mapping Analysis Tool - Database; Data Acquisition and Processing Software - DAPS; Metal-Assisted Fabrication of Biodegradable Porous Silicon Nanostructures; Post-Growth, In Situ Adhesion of Carbon Nanotubes to a Substrate for Robust CNT Cathodes; Integrated PEMFC Flow Field Design for Gravity-Independent Passive Water Removal; Thermal Mechanical Preparation of Glass Spheres; Mechanistic-Based Multiaxial-Stochastic-Strength Model for Transversely-Isotropic Brittle Materials; Methods for Mitigating Space Radiation Effects, Fault Detection and Correction, and Processing Sensor Data; Compact Ka-Band Antenna Feed with Double Circularly Polarized Capability; Dual-Leadframe Transient Liquid Phase Bonded Power Semiconductor Module Assembly and Bonding Process; Quad First Stage Processor: A Four-Channel Digitizer and Digital Beam-Forming Processor; Protective Sleeve for a Pyrotechnic Reefing Line Cutter; Metabolic Heat Regenerated Temperature Swing Adsorption; CubeSat Deployable Log Periodic Dipole Array; Re-entry Vehicle Shape for Enhanced Performance; NanoRacks-Scale MEMS Gas Chromatograph System; Variable Camber Aerodynamic Control Surfaces and Active Wing Shaping Control; Spacecraft Line-of-Sight Stabilization Using LWIR Earth Signature; Technique for Finding Retro-Reflectors in Flash LIDAR Imagery; Novel Hemispherical Dynamic Camera for EVAs; 360 deg Visual Detection and Object Tracking on an Autonomous Surface Vehicle; Simulation of Charge Carrier Mobility in Conducting Polymers; Observational Data Formatter Using CMOR for CMIP5; Propellant Loading Physics Model for Fault Detection Isolation and Recovery; Probabilistic Guidance for Swarms of Autonomous Agents; Reducing Drift in Stereo Visual Odometry; Future Air-Traffic Management Concepts Evaluation Tool; Examination and A Priori Analysis of a Direct Numerical Simulation Database for High-Pressure Turbulent Flows; and Resource-Constrained Application of Support Vector Machines to Imagery.

Source record↗

Toward the characterization of upper tropospheric clouds using Atmospheric Infrared Sounder and Microwave Limb Sounder observations

We estimate the accuracy of cloud top altitude (Z) retrievals from the Atmospheric Infrared Sounder (AIRS) and Advanced Microwave Sounding Unit (AMSU) observing suite (ZA) on board the Earth Observing System Aqua platform. We compare ZA with coincident measurements of Z derived from the micropulse lidar and millimeter wave cloud radar at the Atmospheric Radiation Measurement (ARM) program sites of Nauru and Manus islands (ZARM) and the inferred Z from vertically resolved Microwave Limb Sounder (MLS) ice water content (IWC) retrievals. The mean difference in ZA minus ZARM plus or minus one standard deviation ranges from −2.2 to 1.6 km ± 1.0 to 4.2 km for all cases of AIRS effective cloud fraction (f A) > 0.15 at Manus Island using the cloud radar only. The range of mean values results from using different approaches to determine ZARM, day/night differences, and the magnitude of f A; the variation about the mean decreases for increasing values of f A. Analysis of ZARM from the micropulse lidar at Nauru Island for cases restricted to 0.05 ≤ f A ≤ 0.15 indicates a statistically significant improvement in ZA − ZARM over the cloud radar-derived values at Manus Island. In these cases the ZA − ZARM difference is −1.1 to 2.1 km ± 3.0 to 4.5 km. These results imply that the operational ZA is quantitatively useful for constraining cirrus altitude despite the nominal 45 km horizontal resolution. Mean differences of cloud top pressure (PCLD) inferred from coincident AIRS and MLS ice water content (IWC) retrievals depend upon the method of defining AIRS PCLD (as with the ARM comparisons) over the MLS spatial scale, the peak altitude and maximum value of MLS IWC, and f A. AIRS and MLS yield similar vertical frequency distributions when comparisons are limited to f A > 0.1 and IWC > 1.0 mg m−3. Therefore the agreement depends upon the opacity of the cloud, with decreased agreement for optically tenuous clouds. Further, the mean difference and standard deviation of AIRS and MLS PCLD are highly dependent on the MLS tangent altitude. For MLS tangent altitudes greater than 146 hPa, the strength of the limb technique, the disagreement becomes statistically significant. This implies that AIRS and MLS “agree” in a statistical sense at lower tangent altitudes and “disagree” at higher tangent altitudes. These results provide important insights on upper tropospheric cloudiness as observed by nadir-viewing AIRS and limb-viewing MLS.

Wu, Dong L.↗

Investigations on atomic-vapor-filter high-spectral-resolution lidar for temperature measurements

The temperature measurement by the analysis of Rayleigh scattered laser radiation with atomic vapor filters is investigated in both theory and laboratory experiments. Synthetic air is irradiated with a cw dye laser at 283 nano-meters, and the backscattered spectrum is analyzed with two lead vapor cells in one oven. Temperature measurements are carried out, and the effect of different parameters on the accuracy is investigated. Important aspects for the realization of a lidar are given.

Voss, E.↗

Towards retrieving critical relative humidity from ground-based remote sensing observations

Nearly all parameterisations of large-scale cloud require the specification of the critical relative humidity (RHcrit). This is the gridbox-mean relative humidity at which the subgrid fluctuations in temperature and water vapour become so large that part of a subsaturated gridbox becomes saturated and cloud starts to form. Until recently, the lack of high-resolution observations of temperature and moisture variability has hindered a reasonable estimate of the RHcrit from observations. However, with the advent of ground-based measurements from Raman lidar, it becomes possible to obtain long records of temperature and moisture (co-)variances with sub-minute sample rates. Lidar observations are inherently noisy and any analysis of higher-order moments will be very dependent on the ability to quantify and remove this noise. We present an exporatory study aimed at understanding whether current noise levels of lidar-retrieved temperature and water vapour are sufficient to obtain a reasonable estimate of the RHcrit. We show that vertical profiles of RHcrit can be derived for a gridbox length of up to about 30 km (120) with an uncertainty of about 4 % (2 %). RHcrit tends to be smallest near the scale height and seems to be fairly insensitive to the horizontal grid spacing at the scales investigated here (30 - 120 km). However, larger sensitivity was found to the vertical grid spacing. As the grid spacing decreases from 400 to 100 m, RHcrit is observed to increase by about 6 %, which is more than the uncertainty in the RHcrit retrievals.

Van Weverberg, Kwinten↗

Airborne Measurements of CO2 Column Concentration and Range Using a Pulsed Direct-Detection IPDA Lidar

We have previously demonstrated a pulsed direct detection IPDA lidar to measure range and the column concentration of atmospheric CO2. The lidar measures the atmospheric backscatter profiles and samples the shape of the 1,572.33 nm CO2 absorption line. We participated in the ASCENDS science flights on the NASA DC-8 aircraft during August 2011 and report here lidar measurements made on four flights over a variety of surface and cloud conditions near the US. These included over a stratus cloud deck over the Pacific Ocean, to a dry lake bed surrounded by mountains in Nevada, to a desert area with a coal-fired power plant, and from the Rocky Mountains to Iowa, with segments with both cumulus and cirrus clouds. Most flights were to altitudes >12 km and had 5-6 altitude steps. Analyses show the retrievals of lidar range, CO2 column absorption, and CO2 mixing ratio worked well when measuring over topography with rapidly changing height and reflectivity, through thin clouds, between cumulus clouds, and to stratus cloud tops. The retrievals shows the decrease in column CO2 due to growing vegetation when flying over Iowa cropland as well as a sudden increase in CO2 concentration near a coal-fired power plant. For regions where the CO2 concentration was relatively constant, the measured CO2 absorption lineshape (averaged for 50 s) matched the predicted shapes to better than 1% RMS error. For 10 s averaging, the scatter in the retrievals was typically 2-3 ppm and was limited by the received signal photon count. Retrievals were made using atmospheric parameters from both an atmospheric model and from in situ temperature and pressure from the aircraft. The retrievals had no free parameters and did not use empirical adjustments, and >70% of the measurements passed screening and were used in analysis. The differences between the lidar-measured retrievals and in situ measured average CO2 column concentrations were <1.4 ppm for flight measurement altitudes >6 km.

Lidar↗

Application of the Man-computer Interactive Data Access System (McIDAS) to aerospace meteorology

The Man-computer Interactive Data Access System (McIDAS) considered in this paper has been in use at Marshall Space Flight Center (MSFC) since 1981. The MSFC McIDAS system is primarily employed as a research tool, taking into account rainfall estimates as deduced from Scanning Multichannel Microwave Radiometer (SMMR) data, remote sensing sensor development (MAMS), Doppler-lidar derived winds, cloud tracked winds, and analysis of lightning ground strike data. With respect to the SMMR data analysis, passive microwave satellite data are displayed on McIDAS as images. Two major research efforts are concerned with the determination of mesoscale winds. These efforts are based on a utilization of a Doppler-lidar system, and GOES multispectral imagery. It is pointed out that future plans include increased usage of the McIDAS system.

Meyer, P. J.↗

A New Study of Sea Spray Optical Properties from Multi-Sensor Spaceborne Observations

Retrievals of aerosol optical depth (AOD) from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) satellite sensor require the assumption of an extinction-to-backscatter ratio, also known as the lidar ratio. This paper evaluates a new method to calculate lidar ratio of sea spray aerosol using two independent sources: the AOD from Synergized Optical Depth of Aerosols (SODA) and the integrated attenuated backscatter from CALIOP. The method applied in this study allows particulate lidar ratio to be calculated for individual CALIOP retrievals of single aerosol layer columns over the ocean. Analyses are carried out using CALIOP level 2, 5km sea spray aerosol layer products and collocated SODA nighttime data from December 2007 to December 2009. The global mean lidar ratio for sea spray aerosols was found to be 26 sr, roughly 30 higher than the one prescribed by CALIOP. Data analysis also showed considerable spatiotemporal variability in calculated lidar ratio over different parts of the remote oceans. The calculated aerosol lidar ratios are shown to be inversely related to the mean ocean surface wind speed: increase in ocean surface wind speed (U10) from 0 to 15 ms-1 reduces the mean lidar ratios for sea spray particles from 32 sr (for 0 U10 4 ms-1) to 22 sr (for U10 15 ms-1). Such changes in the lidar ratio are expected to have a corresponding effect on sea spray AOD. The outcomes of this study are relevant for future improvements of the SODA and CALIOP operational product and could lead to more accurate retrievals of sea spray AOD.

aerosol optical depth↗

Feral Hogs Management at Merritt Island National Wildlife Refuge: Analysis of Current Management Program

This ST1 Technical Memorandum (TM) summarizes a two-month project on feral hog management in Merritt Island National Wildlife Refuge (MINWR). For this project, feral hogs were marked and recaptured, with the help of local trappers, to estimate population size and habitat preferences. Habitat covers included vegetation cover and Light Detection and Ranging (LIDAR) data for MINWR. In addition, an analysis was done of hunting records compiled by the Refuge and hog-car accidents compiled by KSC Security.

Rosenfeld, Arie↗

Prospects and applications of on-chip lasers

Abstract Integrated silicon photonics has sparked a significant ramp-up of investment in both academia and industry as a scalable, power-efficient, and eco-friendly solution. At the heart of this platform is the light source, which in itself, has been the focus of research and development extensively. This paper sheds light and conveys our perspective on the current state-of-the-art in different aspects of application-driven on-chip silicon lasers. We tackle this from two perspectives: device-level and system-wide points of view. In the former, the different routes taken in integrating on-chip lasers are explored from different material systems to the chosen integration methodologies. Then, the discussion focus is shifted towards system-wide applications that show great prospects in incorporating photonic integrated circuits (PIC) with on-chip lasers and active devices, namely, optical communications and interconnects, optical phased array-based LiDAR, sensors for chemical and biological analysis, integrated quantum technologies, and finally, optical computing. By leveraging the myriad inherent attractive features of integrated silicon photonics, this paper aims to inspire further development in incorporating PICs with on-chip lasers in, but not limited to, these applications for substantial performance gains, green solutions, and mass production.

Zhou, Zhican↗

Wind Plant Flow Physics and Power Performance in Complex Environments: Cooperative Research and Development (Final Report)

Cornell University will partner with NLR on the topic of wind farm wake effects to improve understanding of interactions between complex atmospheric flows, terrain, and wind turbine wakes and plant efficiency. Wind plant flow simulation tools will also be validated. The work performed will help improve wind farm modeling by analyzing data, applying models, designing and performing experiments to acquire additional wind farm data, and develop better models.

17 WIND ENERGY↗