Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Layered Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Coherent growth of oxide films on a cleaved layered metal oxide substrate

Understanding oxide interface-induced effects requires controlled epitaxial growth of films on well-defined substrate surfaces. While conventional film growth on ex situ prepared substrates has proven to be a successful route, the choices of appropriate substrates with atomically defined surfaces are limited. Here, by depositing La 2/3 Sr 1/3 Mn O 3 on Sr 2 Ru O 4 (001), we present an alternative method of growing oxide thin films on in situ cleaved surfaces of layered-structured substrates. Cleaving Sr 2 Ru O 4 at low temperature in ultrahigh vacuum exposes an atomically flat, solely SrO-terminated surface with up to micrometer-scale terraces. The deposition of La 2/3 Sr 1/3 Mn O 3 spontaneously diminishes the surface Ru O 6 in-plane rotational distortion of the substrate and results in a cubic-like perovskite film structure with (La/Sr)-O layer termination. The interface is atomically sharp without obvious deviation of lattice spacing and chemical valence, except in the first unit cell where Ru-Mn intermixing is observed. Finally, these results demonstrate that film growth on a cleaved substrate can be an alternative route to obtain well-defined interfaces and in addition increase the availability of substrates for future oxide films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Turbulent Processes that Influence Boundary-Layer Cloud Structure (Final Technical Report)

Many models of the atmosphere simulate vertical profiles of observable fields, such as temperature, moisture, and vertical velocity. To assess the realism of such model output, it is important to evaluate the modeled profiles against observations. However, many extant evaluations consist of comparing time averaged profiles from the model and the observations. Such time averages can smooth out unrealistic features that appear in instantaneous profiles. In this way, the time averages may obscure certain model errors from detection. For instance, many models misrepresent turbulent processes, leading to profiles that are too smoothed out or too noisy. E.g., if a model has coarse vertical resolution and overly strong diffusion, then the model may be unable to produce observed sharp peaks. On the other hand, a model may have artificial approximations that produce spurious jumps in the vertical. Much can be learned by browsing through instantaneous snapshots of model output. But the volume of output produced by a global model is far too great to rely purely on visual inspection. In addition, we need a way to statistically characterize the profiles, so that anomalies can be detected more conveniently.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1975

Cadmium sulfide solar cells

Development, fabrication and applications of CdS solar cells are reviewed in detail. The suitability of CdS cells for large solar panels and microcircuitry, and their low cost, are emphasized. Developments are reviewed by manufacturer-developer. Vapor phase deposition of thin-film solar cells, doping and co-evaporation, sputtering, chemical spray, and sintered layers are reviewed, in addition to spray deposition, monograin layer structures, and silk screening. Formation of junctions by electroplating, evaporation, brushing, CuCl dip, and chemiplating are discussed, along with counterelectrode fabrication, VPD film structures, the Cu2S barrier layer, and various photovoltaic effects (contact photovoltage, light intensity variation, optical enhancement), and various other CdS topics.

Stanley, A. G.↗
NASA NTRS1980

Physicochemical and dynamical processes in cometary ionospheres. I - The basic flow profile

The paper deals with the basic aspects of solar wind interaction with the ionosphere of a large comet and with detailed hydrodynamic models developed to describe the flow exterior to the tangential discontinuity surface that separates the outflowing purely cometary ions from the inflowing contaminated solar wind. The equation of the basic flow model and the results of a preliminary analysis of these equations are given, and the shape and structure of the shock layer are analyzed. The shock layer structure associated with fan-shaped comet emanating from the cometary nucleus in the general direction to the sun is identified.

Houpis, H. L. F.↗
NASA NTRS1984

Observation of double-layer-like structures at rocket altitudes

Two hundred and thirty large amplitude electric field pulses in a rocket flight to an apogee of 585 km over an aurora have been observed. While the limitations of the instrumentation only allow limits to be set on the characteristics of these pulses, the limits are nevertheless significant. A typical lower limit on the potential jump of the pulses is about .4 volts. Many of the pulses show structure at a frequency very close (less than 2 percent) to the proton-cyclotron frequency.

Kellogg, P. J.↗
NASA NTRS1984

Shear deformation plate continua of large double-layered space structures

The energy equivalence to construct equivalent continua for the actual lattice structure is described. An energy equivalent continuum is defined as that which has the same amount of strain and kinetic energies stored in it as the original lattice structure when both are subjected to the same loading conditions. The equivalent continuum is characterized by its strain and kinetic energies from which the constitutive relations and the equations of motion can be derived. A simple method to model large rigid jointed lattices as continuous media with couple stresses is presented. The transition from the discrete system to the continuous medium is achieved by expanding the displacements and the rotations of the nodal points in a Taylor series about a suitable chosen origin. Basic kinematic assumptions are introduced to insure that the assumptions used in deriving the governing equations of the modeled continuum are satisfied. The number of terms retained in the Taylor series expansion will depend upon the properties to be evaluated. This implies that the kind of continuum needed to model from the discrete lattice, before the actual properties are derived was to predetermined.

Hefzy, M. S.↗
NASA NTRS1987

Tailorable infrared sensing device with strain layer superlattice structure

An infrared photodetector is formed of a heavily doped p-type Ge sub x Si sub 1-x/Si superlattice in which x is pre-established during manufacture in the range 0 to 100 percent. A custom-tailored photodetector that can differentiate among close wavelengths in the range of 2.7 to 50 microns is fabricated by appropriate selection of the alloy constituency value, x, to establish a specific wavelength at which photodetection cutoff will occur.

Cheng, Li-Jen↗
NASA NTRS1989

Tailorable infrared sensing device with strain layer superlattice structure

An infrared photodetector is formed of a heavily doped p-type Ge(x)Si(1-x)/Si superlattice in which x is pre-established during manufacture in the range 0 to 100 percent. A custom tailored photodetector that can differentiate among close wavelengths in the range of 2.7 to 50 microns is fabricated by appropriate selection of the alloy constituency value, x, to establish a specific wavelength at which photodetection cut-off will occur.

Cheng, Li-Jen↗
NASA NTRS1999

The Estimation Surface Latent Heat Flux Over the Ocean and its Relationship to Marine Atmospheric Boundary Layer (MABL) Structure

A new technique combining active and passive remote sensing instruments for the estimation of surface latent heat flux over the ocean is presented. This synergistic method utilizes aerosol lidar backscatter data, multi-channel infrared radiometer data and microwave scatterometer data acquired onboard the NASA P-3B research aircraft during an extended field campaign over the Atlantic ocean in support of the Lidar In-space Technology Experiment (LITE) in September of 1994. The 10 meter wind speed derived from the scatterometers and the lidar-radiometer inferred near-surface moisture are used to obtain an estimate of the surface flux of moisture via bulk aerodynamic formulae. The results are compared with the Special Sensor Microwave Imager (SSM/I) daily average latent heat flux and show reasonable agreement. However, the SSM/I values are biased high by about 30 W/sq m. In addition, the MABL height, entrainment zone thickness and integrated lidar backscatter intensity are computed from the lidar data and compared with the magnitude of the surface fluxes. The results show that the surface latent heat flux is most strongly correlated with entrainment zone top, bottom and the integrated MABL lidar backscatter, with corresponding correlation coefficients of 0.62, 0.67 and 0.61, respectively.

Palm, Stephen P.↗
NASA NTRS2000

The Estimation of Surface Latent Heat Flux Over the Ocean and its Relationship to Marine Atmospheric Boundary Layer (MABL) Structure

A new technique combining active and passive remote sensing instruments for the estimation of surface latent heat flux over the ocean is presented. This synergistic method uses aerosol lidar backscatter data, multi-channel infrared radiometer data and microwave scatterometer data acquired onboard the NASA P-3B research aircraft during an extended field campaign over the Atlantic ocean in support of the Lidar In-space Technology Experiment (LITE) in September of 1994. The 10 meter wind speed derived from the scatterometers and the lidar-radiometer inferred near-surface moisture are used to obtain an estimate of the surface flux of moisture via bulk aerodynamic formulae. The results are compared with the Special Sensor Microwave Imager (SSM/I) daily average latent heat flux and show reasonable agreement with an rms error and bias of about 50 and 25 W per square meters, respectively. In addition, the MABL height, entrainment zone thickness and integrated lidar backscatter intensity are computed from the lidar data and compared with the magnitude of the surface fluxes. The results show that the surface latent heat flux is most strongly correlated with entrainment zone top, bottom and the integrated MABL lidar backscatter, with corresponding correlation coefficients of 0.62, 0.67 and 0.61, respectively.

Palm, Stephen P.↗
NASA NTRS2011

Fast Numerical Methods for the Design of Layered Photonic Structures with Rough Interfaces

Modified boundary conditions (MBC) and a multilayer approach (MA) are proposed as fast and efficient numerical methods for the design of 1D photonic structures with rough interfaces. These methods are applicable for the structures, composed of materials with arbitrary permittivity tensor. MBC and MA are numerically validated on different types of interface roughness and permittivities of the constituent materials. The proposed methods can be combined with the 4x4 scattering matrix method as a field solver and an evolutionary strategy as an optimizer. The resulted optimization procedure is fast, accurate, numerically stable and can be used to design structures for various applications.

Komarevskiy, Nikolay↗
NASA NTRS2014

Instantaneous Wavenumber Estimation for Damage Quantification in Layered Plate Structures

This paper illustrates the application of instantaneous and local wavenumber damage quantification techniques for high frequency guided wave interrogation. The proposed methodologies can be considered as first steps towards a hybrid structural health monitoring/ nondestructive evaluation (SHM/NDE) approach for damage assessment in composites. The challenges and opportunities related to the considered type of interrogation and signal processing are explored through the analysis of numerical data obtained via EFIT simulations of damage in CRFP plates. Realistic damage configurations are modeled from x-ray CT scan data of plates subjected to actual impacts, in order to accurately predict wave-damage interactions in terms of scattering and mode conversions. Simulation data is utilized to enhance the information provided by instantaneous and local wavenumbers and mitigate the complexity related to the multi-modal content of the plate response. Signal processing strategies considered for this purpose include modal decoupling through filtering in the frequency/wavenumber domain, the combination of displacement components, and the exploitation of polarization information for the various modes as evaluated through the dispersion analysis of the considered laminate lay-up sequence. The results presented assess the effectiveness of the proposed wavefield processing techniques as a hybrid SHM/NDE technique for damage detection and quantification in composite, plate-like structures.

Mesnil, Olivier↗