Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Lattice dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Characterization of Carrier Cooling Bottleneck in Silicon Nanoparticles by Extreme Ultraviolet (XUV) Transient Absorption Spectroscopy

Silicon nanoparticles have the promise to surpass the theoretical efficiency limit of single-junction silicon photovoltaics by the creation of a “phonon bottleneck,” a theorized slowing of the cooling rate of hot optical phonons that in turn reduces the cooling rate of hot carriers in the material. Verifying the presence of a phonon bottleneck in silicon nanoparticles requires simultaneous resolution of electronic and structural changes at short timescales. Here, extreme ultraviolet transient absorption spectroscopy is used to observe the excited-state electronic and lattice dynamics in polycrystalline silicon nanoparticles following 800 nm photoexcitation, which excites carriers with 0.35 ± 0.03 eV excess energy above the Δ 1 conduction band minimum. The nanoparticles have nominal 100 nm diameters with crystalline grain sizes of about ~16 nm. The extracted carrier–phonon and phonon–phonon relaxation times of the nanoparticles are compared to those for a silicon (100) single-crystal thin film at similar carrier densities (2 × 10 19 cm –3 for the nanoparticles and 6 × 10 19 cm –3 for the film). The measured carrier–phonon and phonon–phonon scattering lifetimes for the polycrystalline nanoparticles are 870 ± 40 fs and 17.5 ± 0.3 ps, respectively, versus 195 ± 20 fs and 8.1 ± 0.2 ps, respectively, for the silicon thin film. Furthermore, the reduced scattering rates observed in the nanoparticles are consistent with the phonon bottleneck hypothesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effect of Pressure on Crystal Structure and Phonon Density of States of FeSi

The strongly correlated material FeSi displays several unusual thermal, magnetic, and structural properties under varying pressure-temperature (P-T) conditions. It is a potential thermoelectric alloy and a material with several geochemical implications as a possible constituent at the Earth's core-mantle boundary (CMB). Previous theoretical studies predicted a pressure-induced B20-B2 transition at ambient temperature below 40 GPa; however, experimentally, the structural transition is observed only at high P-T conditions. In this study, we have performed high-pressure powder X-ray diffraction (XRD) up to 90 GPa and Nuclear Resonant Inelastic X-ray Scattering (NRIXS) measurements up to 120 GPa to understand the phase stability and lattice dynamics. Our study provides evidence for a non-hydrostatic stress-induced B20-B2 transition in FeSi at around 36 GPa. We deduced the Fe partial phonon density of states (PDOS) and thermal parameters from NRIXS measurements up to 120 GPa and compared them with density functional theory (DFT) calculations. Furthermore, the computations show pressure-induced metallization and the band gap closing around 12 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

First-Principles Characterization of Surface Phonons of Halide Perovskite CsPbI 3 and Their Role in Stabilization

The stability of halide perovskites has been a long-standing issue for their real-world application. Approaches to improve stability include nanostructuring, dimensionality reduction, and strain engineering, where surfaces play an important role in the formation of a stable structure. To understand the mechanism we compute the lattice dynamics of the surface of CsPbI 3 using density functional theory. We demonstrate, for the first time, that CsPbI 3 crystals exhibit surface phonons that are localized on the outermost layers of the slabs, and we perform a complete symmetry characterization including an identification of the Raman/IR active modes. These surface phonons are present in the optically active cubic phase but are absent in the optically inactive "yellow" phase. Furthermore, we show that the surface suppresses bulk instabilities by hardening soft modes of the bulk cubic phase, resulting in phase stabilization and quenching of dynamical disorder. Finally, this study is fundamental for understanding the structural behavior of halide perovskite materials with high surface area-to-volume ratios, and for guiding stabilization strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Light-Emitting Organic Semiconductor-Incorporated Perovskites: Fundamental Properties and Device Applications

Recently, organic semiconductor-incorporated perovskites (OSiPs) have emerged as a new subclass of next-generation organic–inorganic hybrid materials. OSiPs combine the advantages of organic semiconductors, such as large design windows and tunable optoelectronic functionalities, with the excellent charge-transport properties of the inorganic metal-halide counterparts. OSiPs provide a new materials platform for the exploitation of charge and lattice dynamics at the organic–inorganic interfaces for various applications. This Perspective reviews recent achievements in OSiPs highlighting the benefits from organic semiconductor incorporation and elucidates the fundamental light-emitting mechanism, energy transfer, as well as band alignment structures at the organic–inorganic interface. Finally, insights on the emission tunability lead toward a discussion of the potential of OSiPs in light-emitting applications, such as perovskite light-emitting diodes or lasing systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Crosslinking and Gelation of Polymer Brushes and Free Polymer Chains in a Confined Space during Controlled Radical Polymerization-A Computer Simulation Study

The confinement effect on crosslinking and gelation during controlled/living copolymerization of a monovinyl and a divinyl monomer was studied by Monte Carlo computer simulation using the dynamic lattice liquid method. The simulated reactions took place in plane-parallel slits of various widths for various grafting densities (GDs) and various initial initiator/crosslinker ratios ([X] 0 /[Ini] 0 ). Monomers and crosslinkers were initially randomly distributed in the slit, but initiators were either anchored to one solid plane (polymer brushes) or randomly distributed (free chains). For brushes, the gel point (GP) depended on GD and [X] 0 /[Ini] 0 . The higher these parameters, the lower was the gel point. The gel point was also affected by the slit width. For free, nongrafted chains, the dependence of GP on slit width was negligible. For brushes, a nonuniform density of crosslinks was found, the highest density was close to the wall. This asymmetry was high at the gel point and decreased at higher conversions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Excitations of Intercalated Metal Monolayers in Transition Metal Dichalcogenides

We combine Raman scattering spectroscopy and lattice dynamics calculations to reveal the fundamental excitations of the intercalated metal monolayers in the Fe x TaS 2 (x = 1/4, 1/3) family of materials. Both in- and out-of-plane modes are identified, each of which has trends that depend upon the metal–metal distance, the size of the van der Waals gap, and the metal-to-chalcogenide slab mass ratio. We test these trends against the response of similar systems, including Cr-intercalated NbS 2 and RbFe(SO 4 ) 2 , and demonstrate that the metal monolayer excitations are both coherent and tunable. Here, we discuss the consequences of intercalated metal monolayer excitations for material properties and developing applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Twist-Angle-Dependent Ultrafast Charge Transfer in MoS 2 -Graphene van der Waals Heterostructures

Vertically stacked transition metal dichalcogenide-graphene heterostructures provide a platform for novel optoelectronic applications with high photoresponse speeds. Photoinduced nonequilibrium carrier and lattice dynamics in such heterostructures underlie these applications but have not been understood. In particular, the dependence of these photoresponses on the twist angle, a key tuning parameter, remains elusive. Here, using ultrafast electron diffraction, we report the simultaneous visualization of charge transfer and electron–phonon coupling in MoS 2 -graphene heterostructures with different stacking configurations. We find that the charge transfer timescale from MoS 2 to graphene varies strongly with twist angle, becoming faster for smaller twist angles, and show that the relaxation timescale is significantly shorter in a heterostructure as compared to a monolayer. These findings illustrate that twist angle constitutes an additional tuning knob for interlayer charge transfer in heterobilayers and deepen our understanding of fundamental photophysical processes in heterostructures, of importance for future applications in optoelectronics and light harvesting.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Metal Site Substitution and Role of the Dimer on Symmetry Breaking in FePS 3 and CrPS 4 under Pressure

We combine infrared absorption, Raman scattering, and diamond anvil cell techniques to explore the properties of FePS 3 and CrPS 4 under pressure, comparing our findings with a symmetry analysis, lattice dynamics calculations, and an examination of the energy landscape. Although these complex chalcogenides are considered to be members of the same family of materials, they display remarkably different phase progressions on account of the metal center orbital filling, character of the P–P linkage, layer corrugation, and differing size of the van der Waals gap. Here, we discuss the space group progressions, structure–property relations, and development of pressure-induced metallicity in terms of the competition between local and long-range symmetry transformations and structural distortion pathways. These findings place the properties of FePS 3 and CrPS 4 on a firm foundation for work under strain control and in the single layer limit.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Real-Space Infrared Spectroscopy of Ferroelectric Domain Walls in Multiferroic h -(Lu,Sc)FeO 3

Herein we employ synchrotron-based near-field infrared spectroscopy to image the phononic properties of ferroelectric domain walls in hexagonal ( h ) Lu 0.6 Sc 0.4 FeO 3 , and we compare our findings with a detailed symmetry analysis, lattice dynamics calculations, and prior models of domain-wall structure. Rather than metallic and atomically thin as observed in the rare-earth manganites, ferroelectric walls in h -Lu 0.6 Sc 0.4 FeO 3 are broad and semiconducting, a finding that we attribute to the presence of an A -site substitution-induced intermediate phase that reduces strain and renders the interior of the domain wall nonpolar. Mixed Lu/Sc occupation on the A site also provides compositional heterogeneity over micron-sized length scales, and we leverage the fact that Lu and Sc cluster in different ratios to demonstrate that the spectral characteristics at the wall are robust even in different compositional regimes. This work opens the door to broadband imaging of physical and chemical heterogeneity in ferroics and represents an important step toward revealing the rich properties of these flexible defect states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Signatures of Coherent Phonon Transport in Ultralow Thermal Conductivity Two-Dimensional Ruddlesden–Popper Phase Perovskites

An emerging class of methylammonium lead iodide (MAPbI 3 )-based Ruddlesden-Popper (RP) phase perovskites, BA 2 MA n-1 Pb n I 3n+1 (n = 1-7), exhibit enhanced stability to environmental conditions relative to MAPbI 3 , yet still degrade at elevated temperatures. Here, we experimentally determine the thermal conductivities of these layered RP phases for n = 1-6, where n defines the number of repeated perovskite octahedra per layer. We measure thermal conductivities of 0.37 ± 0.13/0.12, 0.17 ± 0.08/0.07, 0.21 ± 0.05/0.04, and 0.19 ± 0.04/0.03 W/m∙K in thin films of n = 1-4 and 0.08 ± 0.06/0.04, 0.06 ± 0.04/0.03, 0.06 ± 0.03/0.03, and 0.08 ± 0.07/0.04 W/m∙K in single crystals of n = 3-6. With the exception of n = 1, these thermal conductivities are lower than the range of 0.34-0.50 W/m∙K reported for single-crystal MAPbI 3 . Reduced-order lattice dynamics modeling suggests that the initially decreasing trend of thermal conductivity in similarly oriented perovskites with increasing n may result from the transport properties of coherent phonons, emergent from the superstructure, that do not scatter at the interfaces of organic butylammonium chains and perovskite octahedra. Reduced group velocity of coherent phonons in n = 3-6, a consequence of band flattening in the phonon dispersion, is primarily responsible for their ultralow thermal conductivities. Similar effects on thermal conductivity have been experimentally demonstrated in deposited superlattices, but never in naturally defined materials such as RP phases. GIWAXS measurements reveal that higher n RP phase thin films are less orientationally controlled and therefore possess apparently elevated thermal conductivities relative to single crystals of the same n.

2D perovskites↗
DOE OSTI2020

Three-Dimensional Lead Iodide Perovskitoid Hybrids with High X-ray Photoresponse

Large organic A cations cannot stabilize the 3D perovskite AMX 3 structure because they cannot be accommodated in the cubo-octhedral cage (do not follow the Goldschmidt tolerance factor rule), and they generally template low-dimensional structures. In this paper, we report that the large dication aminomethylpyridinium (AMPY) can template novel 3D structures which resemble conventional perovskites. They have the formula (xAMPY)M 2 I 6 (x = 3 or 4, M = Sn 2+ or Pb 2+ ) which is double of the AMX3 formula. However, because of the steric requirement of the Goldschmidt tolerance factor rule, it is impossible for (xAMPY)M 2 I 6 to form proper perovskite structures. Instead, a combination of corner-sharing and edge-sharing connectivity is adopted in these compounds leading to the new 3D structures. DFT calculations reveal that the compounds are indirect band gap semiconductors with direct band gaps presenting at slightly higher energies and dispersive electronic bands. The indirect band gaps of the Sn and Pb compounds are ~1.7 and 2.0 eV, respectively, which is slightly higher than the corresponding AMI 3 3D perovskites. The Raman spectra for the compounds are diffuse, with a broad rising central peak at very low frequencies around 0 cm –1 , a feature that is characteristic of dynamical lattices, high anharmonicity, and dissipative vibrations very similar to the 3D AMX 3 perovskites. Devices of (3AMPY)Pb 2 I 6 crystals exhibit clear photoresponse under ambient light without applied bias, reflecting a high carrier mobility (μ) and long carrier lifetime (τ). The devices also exhibit sizable X-ray generated photocurrent with a high μτ product of ~1.2×10 -4 cm 2 /V and a X-ray sensitivity of 207 μC∙Gy -1 ∙cm -2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tolerance Factor for Stabilizing 3D Hybrid Halide Perovskitoids Using Linear Diammonium Cations

Three-dimensional (3D) halide perovskites have attracted enormous research interest, but the choice of the A-site cations is limited by the Goldschmidt tolerance factor. In order to accommodate cations that lie outside the acceptable range of the tolerance factor, low-dimensional structures usually form. To maintain the favorable 3D connection, the links among the metal-halide octahedra need to be rearranged to fit the large cations. This can result in a departure from the proper corner-sharing perovskite architectures and lead to distinctly different perovskitoid motifs with edge- and face-sharing. In this work, we report four new 3D bromide perovskitoids incorporating linear organic diammonium cations, A'Pb 2 Br 6 (A' is a +2 cation). We propose a rule that can guide the further expansion of this class of compounds, analogous to the notion of Goldschmidt tolerance factor widely adopted for 3D AMX 3 perovskites. The fundamental building blocks in A'Pb 2 Br 6 consist of two edge-shared octahedra, which are then connected by corner-sharing to form a 3D network. Different compounds adopt different structural motifs, which can be transformed from one to another by symmetry operations. Electronic structure calculations suggest that they are direct bandgap semiconductors, with relatively large band dispersions created by octahedra connected by corner-sharing. They exhibit similar electronic band structures and dynamic lattice characteristics to the regular 3D AMX 3 perovskites. Structures with smaller Pb–Br–Pb angles and larger octahedra distortion exhibit broad photoluminescence at room temperature. Furthermore, the emerging structure–property relationships in these 3D perovskitoids set the foundation for designing and investigating these compounds for a variety of optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Experimental Quantification of Spin–Phonon Coupling in Molecular Qubits Using Inelastic Neutron Scattering

Electronic spin superposition states enable nanoscale sensing through their sensitivity to the local environment, yet their sensitivity to vibrational motion also limits their coherence times. In molecular spin systems, chemical tunability and atomicscale resolution are accompanied by a dense, thermally accessible phonon spectrum that introduces efficient spin relaxation pathways. Despite extensive theoretical work, there is little experimental consensus on which vibrational energies dominate spin relaxation or how molecular structure controls spin−phonon coupling (SPC). We present a fully experimental method to quantify SPC coefficients by combining temperature-dependent vibrational spectra from inelastic neutron scattering with spin relaxation rates measured by electron paramagnetic resonance. We apply this framework to two model S = 1/2 systems, copper(II) phthalocyanine (CuPc) and copper(II) octaethylporphyrin (CuOEP). Two distinct relaxation regimes emerge: below 40 K, weakly coupled lattice modes below 50 cm −1 dominate, whereas above 40 K, optical phonons above ∼185 cm −1 become thermally populated and drive relaxation with SPC coefficients nearly 3 orders of magnitude larger. Structural distortions in CuOEP that break planar symmetry soften the crystal lattice and enhance anharmonic scattering but also raise the energy of stretching modes at the molecular core where the spins reside. This redistributes vibrational energy toward the molecular periphery and out of plane, ultimately reducing SPC relative to CuPc and enabling room-temperature spin coherence in CuOEP. Although our method does not provide mode-specific SPC coefficients, it quantifies contributions from distinct spectral regions and establishes a broadly applicable, fully experimental link between crystal structure, lattice dynamics, and spin relaxation.

Lohaus, Stefan H. [California Institute of Technol↗
DOE OSTI2020

Surface oxygenation of multicomponent nanoparticles toward active and stable oxidation catalysts

Abstract The need for active and stable oxidation catalysts is driven by the demands in production of valuable chemicals, remediation of hydrocarbon pollutants and energy sustainability. Traditional approaches focus on oxygen-activating oxides as support which provides the oxygen activation at the catalyst-support peripheral interface. Here we report a new approach to oxidation catalysts for total oxidation of hydrocarbons (e.g., propane) by surface oxygenation of platinum (Pt)-alloyed multicomponent nanoparticles (e.g., platinum-nickel cobalt (Pt–NiCo)). The in-situ/operando time-resolved studies, including high-energy synchrotron X-ray diffraction and diffuse reflectance infrared Fourier transform spectroscopy, demonstrate the formation of oxygenated Pt–NiOCoO surface layer and disordered ternary alloy core. The results reveal largely-irregular oscillatory kinetics associated with the dynamic lattice expansion/shrinking, ordering/disordering, and formation of surface-oxygenated sites and intermediates. The catalytic synergy is responsible for reduction of the oxidation temperature by ~100 °C and the high stability under 800 °C hydrothermal aging in comparison with Pt, and may represent a paradigm shift in the design of self-supported catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electron-momentum dependence of electron-phonon coupling underlies dramatic phonon renormalization in YNi 2 B 2 C

Electron-phonon coupling, i.e., the scattering of lattice vibrations by electrons and vice versa, is ubiquitous in solids and can lead to emergent ground states such as superconductivity and charge-density wave order. A broad spectral phonon line shape is often interpreted as a marker of strong electron-phonon coupling associated with Fermi surface nesting, i.e., parallel sections of the Fermi surface connected by the phonon momentum. Alternatively broad phonons are known to arise from strong atomic lattice anharmonicity. Here, we show that strong phonon broadening can occur in the absence of both Fermi surface nesting and lattice anharmonicity, if electron-phonon coupling is strongly enhanced for specific values of electron-momentum, k. We use inelastic neutron scattering, soft x-ray angle-resolved photoemission spectroscopy measurements and ab-initio lattice dynamical and electronic band structure calculations to demonstrate this scenario in the highly anisotropic tetragonal electron-phonon superconductor YNi 2 B 2 C. This new scenario likely applies to a wide range of compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Aberrant electronic and structural alterations in pressure tuned perovskite NaOsO 3

The perovskite NaOsO 3 has a metal–insulator transition at temperature 410 K, which is delicate, intriguing, and provokes a lot of debate on its nature. Our combined electrical resistance, Raman, and synchrotron x-ray diffraction experiments show that the insulating ground state in this osmate endures under high pressure up to at least 35 GPa. In this pressure range, compression reveals hidden hysteretic resistance properties with a transient metallic state near 200 K, manifested three electronic character anomalies (at 1.7, 9.0, and 25.5 GPa), and a structural transition to the singular polar phase (at ~18 GPa). We distinguish NaOsO 3 from the regular crystallographic behavior of perovskites, though the electrical specificities resemble iridates and nickelates. The theoretical first-principle band structure and lattice dynamics calculations demonstrate that the magnetically itinerant Lifshitz-type mechanism with spin–orbit and spin–phonon interactions is responsible for these pressure-induced changes. Our findings provide another new playground for the emergence of new states in 5d materials by using high-pressure methods.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Phonon mixing in the charge density wave state of ScV6Sn6

Abstract Kagomé metals are widely recognized, versatile platforms for exploring topological properties, unconventional electronic correlations, magnetic frustration, and superconductivity. In the R V 6 Sn 6 family of materials ( R = Sc, Y, Lu), ScV 6 Sn 6 hosts an unusual charge density wave ground state as well as structural similarities with the A V 3 Sb 5 system ( A = K, Cs, Rb). In this work, we combine Raman scattering spectroscopy with first-principles lattice dynamics calculations to reveal phonon mixing processes in the charge density wave state of ScV 6 Sn 6 . In the low temperature phase, we find at least four new peaks in the vicinity of the V-containing totally symmetric mode near 240 cm −1 suggesting that the density wave acts to mix modes of P 6/ m m m and $$R\bar{3}m$$ R 3 ¯ m symmetry - a result that we quantify by projecting phonons of the high symmetry state onto those of the lower symmetry structure. We also test the stability of the short-range ordered density wave state under compression and propose that both physical and chemical pressure quench the effect. We discuss these findings in terms of symmetry and the structure-property trends that can be unraveled in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Pressure-induced structural phase transitions in CrSBr

There is growing interest in combining chemical complexity with external stimuli like pressure, field, and light for property control in van der Waals solids. This is because extreme conditions trigger the development of new states of matter and functionality. In this work, we bring together synchrotron-based infrared absorption, Raman scattering, and diamond anvil cell techniques with first-principles calculations of the lattice dynamics and energy landscape to reveal the series of structural phase transitions in CrSBr. By tracking how the phonons change under pressure, we uncover a remarkable chain of complex symmetry modifications, interlayer interactions, and chemical reactions. A group-subgroup analysis suggests that CrSBr undergoes an orthorhombic Pmmn → monoclinic P2/m transition at 7.6 GPa, and based upon a comparison with model oxychlorides like FeOCl and CrOCl, we propose that changes in the pendant halide groups drive the system to a P2 1 /m-like space group above 15.3 GPa. Compression above 20.2 GPa is irreversible, resulting in the formation of an entirely new compound that is metastable for months. This work opens the door to the use of pressure and possibly strain to control the properties of CrSBr.

Microscopy↗