Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “JUNCTION DIODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

High Power Laser Diode Array Qualification and Guidelines for Space Flight Environments

Semiconductor laser diodes emit coherent light by simulated emission generated inside the cavity formed by the cleaved end facets of a slab of semiconductor that is typically less than a millimeter in any dimension for single emitters. The diode is pumped by current injection in the p-n junction through the metallic contacts. Laser diodes emitting in the range of 0.8 micron to 1.06 micron have a wide variety of applications from pumping erbium doped fiber amplifiers, dual-clad fiber lasers, solid-state lasers used in telecom, aerospace, military, medical purposes and all the way to CD players, laser printers and other consumer and industrial products. Laser diode bars have many single emitters side by side and spaced approximately .5 mm on a single slab of semiconductor material approximately .5 mm x 10 mm. The individual emitters are connected in parallel maintaining the voltage at -2V but increasing the current to ~50-100A/bar. Stacking these laser diode bars in multiple layers, 2 to 20+ high, yields high power laser diode arrays capable of emitting several hundreds of Watts. Electrically the bars are wired in series increasing the voltage by 2V/bar but maintaining the total current at ~50-100A. These arrays are one of the enabling technologies for efficient, high power solid-state lasers. Traditionally these arrays are operated in QCW (Quasi CW) mode with pulse widths ~10-200 (mu)s and with repetition rates of ~10-200Hz. In QCW mode the wavelength and the output power of the laser reaches steady-state but the temperature does not. The advantage is a substantially higher output power than in CW mode, where the output power would be limited by the internal heating and hence the thermal and heat sinking properties of the device. The down side is a much higher thermal induced mechanical stress caused by the constant heating and cooling cycle inherent to the QCW mode.

Eegholm, Niels↗

Advantages of flattened electrode in bottom contact single-walled carbon nanotube field-effect transistor

We fabricated single-walled carbon nanotube (SWNT) field-effect transistor (FET) devices on flattened electrodes, in which there are no height difference between metal electrodes and the substrate. SWNT-FET fabricated using bottom contact technique have some advantages, such that the SWNTs are free from electron irradiation, have direct contact with the desired metal electrodes, and can be functionalized before or after deposition. However, the SWNTs can be bent at the contact point with the metal electrodes leading to a different electrical characteristic of the devices. The number of SWNT direct junctions in short channel length devices is drastically increased by the use of flattened electrodes due to strong attractive interaction between SWNT and the substrate. The flattened electrodes show a better balance between their hole and electron mobility compared to that of the non-flattened electrodes, that is, ambipolar FET characteristic. It is considered that bending of the SWNTs in the non-flattened electrode devices results in a higher Schottky barrier for the electrons.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High detection efficiency micro-structured solid-state neutron detector with extremely low leakage current fabricated with continuous p-n junction

We report the continuous p-n junction formation in honeycomb structured Si diode by in situ boron deposition and diffusion process using low pressure chemical vapor deposition for solid-state thermal neutron detection applications. Optimized diffusion temperature of 800 Degree-Sign C was obtained by current density-voltage characteristics for fabricated p{sup +}-n diodes. A very low leakage current density of {approx}2 Multiplication-Sign 10{sup -8} A/cm{sup 2} at -1 V was measured for enriched boron filled honeycomb structured neutron detector with a continuous p{sup +}-n junction. The neutron detection efficiency for a Maxwellian spectrum incident on the face of the detector was measured under zero bias voltage to be {approx}26%. These results are very encouraging for fabrication of large area solid-state neutron detector that could be a viable alternative to {sup 3}He tube based technology.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Efficient Schottky-like junction GaAs nanowire photodetector with 9 GHz modulation bandwidth with large active area

Efficient, low capacitance density GaAs/Indium-Tin-Oxide Schottky-like junction photodetectors with a 50 μm square active are fabricated for operation in the gigahertz range. Modulation bandwidth is experimentally measured up to 10 GHz at various applied reverse biases and optical intensities to explore the effects of photo-generated carrier screening on modulation bandwidth. Last, the bandwidth dependence on applied reverse bias and optical intensity is simulated as a means to quantify average carrier velocities in nanowire material systems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Enhanced efficiency of graphene-silicon Schottky junction solar cells by doping with Au nanoparticles

We have reported a method to enhance the performance of graphene-Si (Gr/Si) Schottky junction solar cells by introducing Au nanoparticles (NPs) onto the monolayer graphene and few-layer graphene. The electron transfer between Au NPs and graphene leads to the increased work function and enhanced electrical conductivity of graphene, resulting in a remarkable improvement of device efficiency. By optimizing the initial thickness of Au layers, the power conversion efficiency of Gr/Si solar cells can be increased by more than three times, with a maximum value of 7.34%. These results show a route for fabricating efficient and stable Gr/Si solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

PV Inverter Systems Enabled by Monolithically Integrated SiC based Four Quadrant Power Switch (4-QPS) [BiDFET]

The purpose of this project was to develop a new breed of Power Conversion Systems (PCS) for PV integration that is enabled by the newly developed 4-Quadrant Single Die SiC Power Semiconductor Switches (4-QPS) or also referred to as “Bidirectional FET (BIDFET)”. This work includes semiconductor die development, advanced packaging, converter design, development, and testing of 4-QPS enabled hardware prototypes at 1 kW (for single phase residential application) and 10 kW (for three phase commercial application). The BiDirectional Field-Effect Transistor (BiDFET) can enable circuit topologies requiring four-quadrant switches, that were earlier designed using discrete combinations of MOSFETs, IGBTs, GaN HEMTs, and PiN diodes. The monolithic nature of the BiDFET allows lower device count, smaller switch volume, lower inductance, and simpler packaging, and hence more reliable and commercially viable implementation in power electronics converters. The matrix converter topologies, now feasible using BiDFETs, can eliminate the bulky and unreliable dc link capacitors or inductors required for conventional voltage-source or current-source converters in ac–ac and ac–dc applications. The 1.2 kV BiDFET has the potential to disrupt all the applications utilizing 1.2 kV switches, including electric vehicle (EV) drivetrain, bidirectional EV chargers, industrial motor drives, solid-state transformers, datacenter power supplies, elevator drives, dc microgrids, energy storage grid integration, solid-state breakers, etc.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Carrier accumulation near electrodes in ferroelectric films due to polarization boundary conditions

We study the effect of surface polarization on the distribution of free carriers in a wide bandgap semiconductor ferroelectric (FE) film using a thermodynamic approach. We show that free carriers, namely, holes and electrons from ionizable impurities or atomic vacancies can accumulate near the film-electrode interface, if FE polarization profile has a very steep change near the surface that is specified by the extrapolation length. Such an outcome is just the opposite of what happens in a Schottky junction in a partially or fully depleted film. This is also an entirely different effect than what has been often studied in similar structures, where the work function and screening length of the electrode metal determines the electronic character of the interface. Even for low-to-moderate densities of ionizable defects with states within the bandgap close to the band edges, high densities of carriers can localize close to the electrodes in a single domain state FE film when above a critical thickness. For very low densities of such ionizable defects, short extrapolation lengths cause electrical domain formation with minimal carrier accumulation because of the already weak depolarizing fields. This is also true for films below a critical thickness with low-to-moderate densities of ionizable impurities, i.e., electrical domains get stabilized regardless of defect density. The implications of our findings for polarization controlled Schottky to Ohmic-like transition of an interface and experimental results are discussed. It is also found that interfaces of an n-type FE heterostructure can behave like a p-type depending on the barrier heights and impurity density. We conclude that, for low-to-moderate ionizable impurity densities, it is the rate of change of polarization at the interface with position rather than solely its presence that leads to carrier accumulation and that both interfaces can become Ohmic-like with opposite signs of carriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of electron-irradiation on electrical properties of AlGaN/GaN Schottky barrier diodes

Effects of 1 MeV electron-irradiation at room temperature on the electrical properties of AlGaN/GaN heterostructures, including leakage currents, threshold voltages, and electron traps, have been investigated using Schottky barrier diodes (SBDs) fabricated on the AlGaN. The SBDs, before and after the irradiation with a dose of 5x10{sup 15} cm{sup -2}, were characterized by temperature dependent current-voltage and capacitance-voltage measurements and deep level transient spectroscopy. It is found that the irradiation causes (i) significant increase in leakage currents, dominated by tunneling conduction, at both reverse and low-forward biases; (ii) a clear negative shift in threshold voltage in the pinch-off region; and (iii) creation of traps A{sub e}(approx1.1 eV) or A{sub 2}(1.2 eV) and E{sub e}(0.09 eV) in the GaN buffer and AlGaN regions. The irradiation-induced traps can be used to account for the increase in leakage currents and shift in threshold voltage. However, as compared to traps A{sub 2}(1.2 eV) and E(0.13 eV) induced in thick GaN layers by electron-irradiation, the irradiation-induced traps in the AlGaN/GaN heterostructures show some changes in activation energy and electron capture behavior.

36 MATERIALS SCIENCE↗

Germanium-tin p-i-n photodetectors integrated on silicon grown by molecular beam epitaxy

GeSn heterojunction p-i-n diodes with a Sn content of 0.5% are grown with a special low temperature molecular beam epitaxy. The Sn incorporation in Ge is facilitated by a very low temperature growth step in order to suppress Sn surface segregation. Diodes with sharp doping transitions are realized as double mesa structures with a diameter from 1.5 up to 80 {mu}m. An optical responsivity of these GeSn diodes of 0.1 A/W at a wavelength of {lambda}=1.55 {mu}m is measured. In comparison with a pure Ge detector the optical responsivity is increased by factor of 3 as a result of Sn caused band gap reduction.

36 MATERIALS SCIENCE↗

Electromagnetic model for near-field microwave microscope with atomic resolution: Determination of tunnel junction impedance

An electrodynamic model is proposed for the tunneling microwave microscope with subnanometer space resolution as developed by Lee et al. [Appl. Phys. Lett. 97, 183111 (2010)]. Tip-sample impedance Z{sub a} was introduced and studied in the tunneling and non-tunneling regimes. At tunneling breakdown, the microwave current between probe and sample flows along two parallel channels characterized by impedances Z{sub p} and Z{sub t} that add up to form overall impedance Z{sub a}. Quantity Z{sub p} is the capacitive impedance determined by the near field of the probe and Z{sub t} is the impedance of the tunnel junction. By taking into account the distance dependences of effective tip radius r{sub 0}(z) and tunnel resistance R{sub t}(z) = Re[Z{sub t}(z)], we were able to explain the experimentally observed dependences of resonance frequency f{sub r}(z) and quality factor Q{sub L}(z) of the microscope. The obtained microwave resistance R{sub t}(z) and direct current tunnel resistance R{sub t}{sup dc}(z) exhibit qualitatively similar behavior, although being largely different in both magnitude and the characteristic scale of height dependence. Interpretation of the microwave images of the atomic structure of test samples proved possible by taking into account the inductive component of tunnel impedance ImZ{sub t} = ωL{sub t}. Relation ωL{sub t}/R{sub t} ≈ 0.235 was obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Breakdown characteristics of deep-ultraviolet Al 0.6 Ga 0.4 N p-i-n avalanche photodiodes

A top-illuminated deep-ultraviolet Al 0.6 Ga 0.4 N p-i-n avalanche photodiode (APD) structure was designed and grown by metalorganic chemical vapor deposition on an AlN bulk substrate and on two different quality AlN/sapphire templates, and APDs were fabricated and tested. The APD devices with a circular diameter of 20 μm have demonstrated a distinctive reverse-bias breakdown behavior. The reverse breakdown voltage of the APDs is approximately -140 V, which corresponds to a breakdown electric field of 6–6.2 MV/cm for the Al 0.6 Ga 0.4 N material as estimated by Silvaco TCAD simulation. The APDs grown on the AlN bulk substrate show the lowest leakage current density of < 1 × 10 -8 A/cm 2 (at low reverse bias) compared to that of the devices grown on the AlN templates. From the photocurrent measurement, a maximum gain (current limited) of 1.2 × 10 4 is calculated. The average temperature coefficients of the breakdown voltage are negative for APD devices fabricated from both the AlN bulk substrate and the AlN templates, but these data show that the coefficient is the least negative for the APD devices grown on the low-dislocation-density AlN bulk substrate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Capacitance–voltage modeling of mid-wavelength infrared nBn detectors

Capacitance–voltage measurements are a powerful technique to determine doping profiles of semiconductor pn junctions and Schottky barrier diodes. The measurements were recently extended to III-V-based mid-wavelength nBn infrared detectors, and absorber doping densities have been extracted using the widely accepted Schottky approximation, where the potential drop across the device is assumed to be across the depleting absorber layer. However, this approach is limited to when the absorber region of the nBn is under high reverse bias and thus is only able to extract the absorber region doping profile. Here, we introduce a semi-analytical model that is capable of extracting barrier dopant polarity, doping concentration, and thickness, as well as contact and absorber layer doping concentrations, all from a capacitance–voltage measurement. Rather than solely considering the potential drop across the depleting layers, it considers the potential drop across the accumulating layer as well. This negative charge accumulation occurs for the contact and absorber layers in the case of reverse and forward biases, respectively. This allows for a single model to be applied to a capacitance–voltage curve at forward and reverse biases and it can provide regions of bias where the absorber transitions from depletion to accumulation. We compare the agreement of the semianalytical model with modeling results from commercially available finite element method software and experimental capacitance–voltage data. Finally, we show that the method is consistent with the Schottky approximation of extracting absorber doping densities at high reverse bias and discuss the model's limitations.

Physics↗

Parasitic Capacitors' Impact on Switching Performance in a 10 kV SiC MOSFET Based Converter

In a converter based on 10 kV SiC MOSFETs, major sources of parasitic capacitance are the anti-parallel junction barrier schottky (JBS) diode, heat sink, and load inductor. A half bridge phase leg test setup is built to investigate these parasitic capacitors’ impact on the switching performance at 6.25 kV. Generally these parasitic capacitors slows down both turn-on and turn-off transient and can cause significant increase in switching energy loss. The impact of the parasitic capacitor in the load inductor is analyzed, which has either very short wire or long wire in series. Switching performance of the phase leg with two different thermal designs are compared to investigate the impact of the parasitic capacitor due to the heat sink. The large parasitic capacitor due to the large drain plate of discrete 10 kV SiC MOSFET for heat dissipation can result in 44.5% increase in switching energy loss at low load current.

Huang, Xingxuan↗

Investigation of the dielectric waveguide modes in homostructure GaAs laser.

The investigation of the propagation modes in a homostructure GaAs laser and particularly of the spatial displacement of the TE and TM mode is reported. For this investigation, a homostructure GaAs laser was operated in an external optical cavity and experiments were performed where the resonator alignment was varied to displace the image of the p-n junction, formed in the optical cavity, from the p-n junction of the laser diode. The peak power of the laser radiation (which is in the TEM (sub 00) mode), the delay, the optical waveform, and the polarization were measured at room temperature for different cavity alignments. For the evaluation of the propagation modes the experimental results are correlated with the computed field distributions of the modes in a three-layer dielectric waveguide.

Philipp-Rutz, E. M.↗

Development and fabrication of a high current, fast recovery power diode

A high voltage (VR = 1200 V), high current (IF = 150 A), fast recovery ( 700 ns) and low forward voltage drop ( 1.5 V) silicon rectifier was designed and the process developed for its fabrication. For maximum purity, uniformity and material characteristic stability, neutron transmutation n-type doped float zone silicon is used. The design features a hexagonal chip for maximum area utilization of space available in the DO-8 diode package, PIN diffused junction structure with deep diffused D(+) anode and a shallow high concentration n(+) cathode. With the high temperature glass passivated positive bevel mesa junction termination, the achieved blocking voltage is close to the theoretical limit of the starting material. Gold diffusion is used to control the lifetime and the resulting effect on switching speed and forward voltage tradeoff. For solder reflow assembly, trimetal (Al-Ti-Ni) contacts are used. The required major device electrical characteristics were achieved. Due to the tradeoff nature of forward voltage drop and reverse recovery time, a compromise was reached for these values.

Berman, A. H.↗

An X-Band Mixer Engineered for 77 K Operation

An X-band Si-diode singly balanced mixer developed specifically for cryogenic operation is presented. In order to reduce thermal demands on a mechanical cooler, the mixer was designed to operate with a minimum of local oscillator (LO) power. That is, since the LO had to be cooled to reduce phase noise, it was desirable to minimize the LO drive. Novel embedding circuit strategy was responsible for nearly theoretical performance. The signal-matching circuit simultaneously provided a reactive termination to the image, sum, and first, second, and third LO harmonic frequencies. A conversion loss of 3.2 dB at 77 K with an LO drive of +1 dBm was measured. This loss included IF filter, dc block, and hybrid coupler losses. Mixer conversion loss is shown to be consistent with the theoretical performance limit expected from the intrinsic diode. The relationship among junction capacitance, flat-band potential, and conversion loss is examined.

Romanofsky, Robert R.↗

Rectenna that converts infrared radiation to electrical energy

Technologies pertaining to converting infrared (IR) radiation to DC energy are described herein. In a general embodiment, a rectenna comprises a conductive layer. A thin insulator layer is formed on the conductive layer, and a nanoantenna is formed on the thin insulator layer. The thin insulator layer acts as a tunnel junction of a tunnel diode.

30 DIRECT ENERGY CONVERSION↗

Self-Field-Induced Josephson Diode Effect

Josephson diodes are of interest for nonlinear superconducting circuit elements, which have many applications such as in solid-state qubit readout and coupling. Many different mechanisms can give rise to Josephson diode effects (JDEs). In this work, we investigate JDEs generated by the self-field of the supercurrent in the junction. To this end, we experimentally investigate JDEs in the supercurrent quantum interference patterns of planar hybrid Josephson junctions, composed of a cadmium arsenide thin film interfaced with a conventional superconductor. A model that includes the supercurrent self-field accurately describes the experimental observations. We show that self-field-induced JDEs are generally expected in planar junctions in perpendicular magnetic fields, even in cases of symmetric and uniform junctions, as long as they exhibit sufficiently large critical currents. Here, we discuss the tunability of self-field-induced JDEs via the supercurrent density and other parameters.

Josephson diode↗