Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Imagery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Usefulness of Skylab color photography and ERTS-1 multispectral imagery for mapping range vegetation types in southwestern Wyoming

The author has identified the following significant results. Aerial photography at scales of 1:43,400 and 1:104,500 was used to evaluate the usefulness of Skylab color photography (scales of 1:477,979 and 1:712,917) and ERTS-1 multispectral imagery (scale 1:1,000,000) for mapping range vegetation types. The project was successful in producing a range vegetation map of the 68,000 acres of salt desert shrub type in southwestern Wyoming. Techniques for estimation of above-ground green biomass have not yet been confirmed due to the mechanical failure of the photometer used in obtaining relative reflectance measurement. However, graphs of log transmittance versus above-ground green biomass indicate that production estimates may be made for some vegetation types from ERTS imagery. Other vegetation types not suitable for direct ERTS estimation of green biomass may possibly be related to those vegetation types whose production has been estimated from the multispectral imagery.

Gordon, R. C.↗

Stream network analysis and geomorphic flood plain mapping from orbital and suborbital remote sensing imagery application to flood hazard studies in central Texas

The author has identified the following significant results. Development of a quantitative hydrogeomorphic approach to flood hazard evaluation was hindered by (1) problems of resolution and definition of the morphometric parameters which have hydrologic significance, and (2) mechanical difficulties in creating the necessary volume of data for meaningful analysis. Measures of network resolution such as drainage density and basin Shreve magnitude indicated that large scale topographic maps offered greater resolution than small scale suborbital imagery and orbital imagery. The disparity in network resolution capabilities between orbital and suborbital imagery formats depends on factors such as rock type, vegetation, and land use. The problem of morphometric data analysis was approached by developing a computer-assisted method for network analysis. The system allows rapid identification of network properties which can then be related to measures of flood response.

Baker, V. R.↗

Environmental studies of Iceland with ERTS-1 imagery

Imagery from the ERTS-1 satellite can be used to study geological and geophysical phenomena which are important in relation to Iceland's natural resources. Multispectral scanner (MSS) imagery can be used to map areas of altered ground, intense thermal emission, fallout from volcanic eruptions, lava flows, volcanic geomorphology, erosion or build-up of land, snow cover, the areal extent of glaciers and ice caps, etc. At least five distinct vegetation types and barren areas can be mapped using MSS false-color composites. Stereoscopic coverage of iceland by side-lapping ERTS imagery permits precise analysis of various natural phenomena.

Williams, R. S., Jr.↗

The uses of ERTS-I imagery in the analysis of landscape change

Analysis of ERTS-I imagery to delimit, map, and monitor photomorphic regions of landscape dynamics is illustrated. Satellite observations were made over strip mining areas on the Cumberland Plateau of Tennessee; agricultural regions in Tennessee, Kentucky, and portions of northern Alabama and Mississippi; urban-suburban growth areas in Knoxville; and flooded areas within the Mississippi River floodplain. Production and analysis of maps of these areas made from ERTS imagery and RB-57 high altitude aircraft imagery are described and compared. The difficulties encountered in analyzing landscape change in or near urban areas are enumerated (small area size, extreme density of settlement, high reflectance characteristics), and the significance of the results of this investigation is noted.

Rehder, J. B.↗

Interpretation of an urban scene using multi-channel radar imagery

Four channel, SLAR imagery was studied by a group of individuals having no previous experience with either SLAR imagery or the urban area under scrutiny. This tactic was used because it was desired to define the nature of training needed when introducing people to radar imagery of urban scenes. Responses resulting from interpretations based on standard photointerpretation methods were subjected to a Chi-square analysis to determine the level of significance of the interpretations. For the urban scene studied, and for the two wavelengths (X /3.0 cm/ and L /23.0 cm/ Band) and polarizations (HH and HV) used, several types of urban land use were easily and accurately identified. It is shown that little formal training is required for obtaining quite high interpretation accuracies from multi-channel radar images of some urban scenes.

Bryan, M. L.↗

Evaluation of Skylab earth laser beacon imagery

During the Skylab 3 and 4 missions the Skylab spacecraft was illuminated by a low power argon ion and dye laser. The earth laser beacon was studied visually by the astronauts. In addition, they collected 35 mm hand-held color photographs of the beacons. Photographs are shown that were obtained on Skylab 3 and Skylab 4. The imagery collected during the Skylab mission was analyzed to evaluate the utility of beacon lasers as terrestial 'artificial stars' for space navigation. The analyses of the imagery revealed two unusual features of the earth laser beacon: (1) The beacon, even though of a low power (approximately 1 watt), is considerably brighter than any other terrain feature and is readily visible on imagery at a distance in excess of 1500 km (900 miles). (2) Another feature of the beacon is its large size. The typical beacon extends over about 5 resolution areas with a characteristic dimension of about 200 m.

Piech, K. R.↗

Operational applications of NOAA-VHRR imagery in Alaska

Near-real time operational applications of NOAA satellite enhanced thermal infrared imagery to snow monitoring for river flood forecasts, and a photographic overlay technique of imagery to enhance snowcover are presented. Ground truth comparisons show a thermal accuracy of approximately + or - 1 C for detection of surface radiative temperatures. The application of NOAA imagery to flood mapping is also presented.

Seifert, R. D.↗

Boundary-detection algorithm for locating edges in digital imagery

The author has identified the following significant results. Initial development of a computer program which implements a boundary detection algorithm to detect edges in digital images is described. An evaluation of the boundary detection algorithm was conducted to locate boundaries of lakes from LANDSAT-1 imagery. The accuracy of the boundary detection algorithm was determined by comparing the area within boundaries of lakes located using digitized LANDSAT imagery with the area of the same lakes planimetered from imagery collected from an aircraft platform.

Myers, V. I.↗

LANDSAT imagery analysis: An aid for predicting landslide prone areas for highway construction

The most obvious landform features of geologic significance revealed on LANDSAT imagery are linear trends or lineaments. These trends were found to correspond, at least to a large degree, with unmapped faults or complex fracture zones. LANDSAT imagery analysis in northern Arkansas revealed a lineament complex which provides a remarkable correlation with landslide-prone areas along major highway routes. The weathering properties of various rock types, which are considered in designing stable cut slopes and drainage structures, appear to be adversely influenced by the location and trends of LANDSAT defined lineaments. Geologic interpretation of LANDSAT imagery, where applicable and utilized effectively, provides the highway engineer with a tool for predicting and evaluating landslide-prone areas.

Macdonald, H. C.↗

Gypsy moth defoliation assessment: Forest defoliation in detectable from satellite imagery

The author has identified the following significant results. ERTS-1 imagery obtained over eastern Pennsylvania during July 1973, indicates that forest defoliation is detectable from satellite imagery and correlates well with aerial visual survey data. It now appears that two damage classes (heavy and moderate-light) and areas of no visible defoliation can be detected and mapped from properly prepared false composite imagery. In areas where maple is the dominant species or in areas of small woodlots interspersed with agricultural areas, detection and subsequent mapping is more difficult.

Moore, H. J.↗

The use of ERTS/LANDSAT imagery in relation to airborne remote sensing for terrain analysis in Western Queensland, Australia

The author has identified the following significant results. LANDSAT 1 and 2 imagery contrast the geology of the Cloncurry-Dobbyn and the Gregory River-Mt. Isa areas very clearly. Known major structural features and lithological units are clearly displayed while, hitherto unknown lineaments were revealed. Throughout this area, similar rock types produce similar spectral signatures, e.g. quartzites produce light signatures, iron rich rocks produce dark signatures. More geological data are discernible at the 1:50,000 scale than on the 1:250,000 scale. Ore horizons may be identified at the 1:50,000 scale, particularly where they are associated with iron rich rocks. On the level plains north of Cloncurry, distinctive spectral signatures produced by the combined reflectances of plant cover, soils, and geology, distinguish different types of superficial deposits. Existing and former channels of the Cloncurry and Williams Rivers are distinguished at the 1:50,000 scale on both the LANDSAT 1 and 2 imagery. On the Cloncurry Plains, fence lines are discernible on the 1:50,000 LANDSAT 2 imagery.

Cole, M. M.↗

Forestry, geology and hydrological investigations from ERTS-1 imagery in two areas of Ecuador, South America

The author has identified the following significant results. In the Oriente area, well-drained forests containing commercially valuable hardwoods can be recognized confidently and delineated quickly on the ERTS imagery. In the tropical rainforest, ERTS can provide an abundance of inferential information about large scale geologic structures. ERTS imagery is better than normal aerial photography for recognizing linears. The imagery is particularly useful for updating maps of the distributary system of the Guagas River Basin and of any other river with a similarly rapid changing channel pattern.

Moreno, N. V.↗

The use of ERTS imagery for lake classification

The feasibility of using photographic representations of the ERTS imagery to classify lakes in the State of Wisconsin as to their trophic level was studied. Densitometric readings in band 5 of ERTS 70 mm imagery were taken for all the lakes in Wisconsin greater than 100 acres (approximately 1000 lakes). An algorithm has been developed from ground truth measurements to predict from satellite imagery an indicator of trophic status.

Scarpace, F. L.↗

The use of remote sensing imagery for environmental land use and flood hazard mapping

Flood hazard maps have been constructed for Graham, Yuma, and Yavapai Counties in Arizona using remote sensing techniques. Watershed maps of priority areas were selected on the basis of their interest to the county planning staff and represented areas of imminent or ongoing development and those known to be subject to inundation by storm runoff. Landsat color infrared imagery at scales of 1:1,000,000, 1:500,000, and 1:250,000 was used together with high-altitude aerial photography at scales of 1:120,000 and 1:60,000 to determine drainage patterns and erosional features, soil type, and the extent and type of ground cover. The satellite imagery was used in the form of 70 mm chips for enhancement in a color additive viewer and in all available enlargement modes. Field checking served as the main backup to the interpretations. Areas with high susceptibility to flooding were determined with a high level of confidence from the remotely sensed imagery.

Mouat, D. A.↗

Utility of a scanning densitometer in analyzing remotely sensed imagery

The utility of a scanning densitometer for analyzing imagery in the NASA Lewis Research Center's regional remote sensing program was evaluated. Uses studied include: (1) quick-look screening of imagery by means of density slicing, magnification, color coding, and edge enhancement; (2) preliminary category classification of both low- and high-resolution data bases; and (3) quantitative measurement of the extent of features within selected areas. The densitometer was capable of providing fast, convenient, and relatively inexpensive preliminary analysis of aerial and satellite photography and scanner imagery involving land cover, water quality, strip mining, and energy conservation.

Dooley, J. T.↗

A methodology for producing small scale rural land use maps in semi-arid developing countries using orbital imagery

The author has identified the following significant results. Results have shown that it is feasible to design a methodology that can provide suitable guidelines for operational production of small scale rural land use maps of semiarid developing regions from LANDSAT MSS imagery, using inexpensive and unsophisticated visual techniques. The suggested methodology provides immediate practical benefits to map makers attempting to produce land use maps in countries with limited budgets and equipment. Many preprocessing and interpretation techniques were considered, but rejected on the grounds that they were inappropriate mainly due to the high cost of imagery and/or equipment, or due to their inadequacy for use in operational projects in the developing countries. Suggested imagery and interpretation techniques, consisting of color composites and monocular magnification proved to be the simplest, fastest, and most versatile methods.

Vangenderen, J. L.↗

Landsat-1 imagery for geologic evaluation

The paper reviews the geologic evaluation of the North Carolina coastal plain using Landsat-1 imagery as related to a general study of the geomorphology to assess the imagery as a tool for upgrading the understanding of the coastal plain, along with recognition of subsurface structures. Among the more prominent features displayed on the Landsat imagery are the scarps and beach ridges associated with former positions of the shoreline. Compilations of various types of lineaments reveal two dominant trends, one northwest-southeast and the other northeast-southwest, which are significant in the tectonic development of the Atlantic Coastal Plain. The synoptic view recorded by the satellite allows a perspective that aids geologic studies of the Atlantic Coastal Plain.

Welby, C. W.↗

Interactive analysis of thermal imagery

Necessary knowledge is presented on data acquisition and preparation for analysis of thermal imagery of power plant heated discharges remotely sensed from an aircraft, with special emphasis on analog to digital conversion of analog tapes acquired during scanning and to geometrical scaling. The central element in the interactive analysis of thermal imagery is an interactive graphics computer terminal which allows an interpreter to effectively interact with a large-scale computer, providing decisions or data as computations are carried out. A temperature calibration is performed, which the interpreter may test anywhere on the image. When satisfied that calibration is correct, the portion of the image to be analyzed is outlined. Printed and microfiche analyses of the plume are produced. The flow chart of programs for analysis of thermal imagery is presented and discussed in some detail.

Madding, R. P.↗